Where is the URL defined for web enabled transactions / PFCG execute?

Hi
One of our developers is having an issue. Apparently, when executing a web enabled transaction from within PFCG (in the menu structure right-click and choose u2018executeu2019) the Internet Explorer on the client is started with a url to:  http://www-s1pprint.ourcompany.com/sap/bc/webdynpro/.... which is incorrect (note our system SID is S3D but it was copied from S1P, however, what is the 'print' part??)
When testing the exact same service from SICF it is working well and goes to the correct URL http://www.esd3002a.ourcompany.com/ etc, so the reference must come from another source. We'e checked parameters in SM59, RZ10 and SMICM so far and can't find anything relevant.
Where is this set?
Thanks
Ross

What's the content of the parameter
icm/host_name_full
(check using RZ11).
Does this return the proper full qualified hostname? If yes,  check the hosts file and/or DNS of the server whether the IP resolves to the proper name and vice versa.
Markus

Similar Messages

  • Where did the swipe gestures for web browsers go?

    where did the swipe gestures for web browsers go? cuz the 3 finger swipe to go back and forth a page on web browsers now swipes through full-screen apps... i miss that functionality

    JedwardKullen wrote:
    where did the swipe gestures for web browsers go? cuz the 3 finger swipe to go back and forth a page on web browsers now swipes through full-screen apps... i miss that functionality
    If you configure your trackpad settings for "Swipe between pages" TO "two or three fingers" you'll get the functionality back on firefox.  To also correct the issue on Magic Mouse, if you happen to own one, configure the same setting to: "one or two fingers" under Mouse settings.

  • Where is the Trace file for Web OLAP

    Hi SDN Community
    http://help.sap.com/saphelp_nw04/helpdata/en/3d/0dfe3980f23728e10000000a11402f/frameset.htm
    According to this SAP documentation
    Calling up the Web template with an activated trace
    http://yourAppServer:yourPort/SAP/BW/BEx?CMD=LDOC&TEMPLATE_ID=yourTemplate&TRACE=X
    Can you tell me where this file gets produced.
    It indicates this OSS NOTE, but i cannot download as the SAP market place inbox is not working presently.
    Activate OLAP trace
    You usually need a trace to analyze problems in SAP. You can activate the trace with the help of note 112458 or by using the TRACE attribute.
    Thanks.
    Simon

    Hi Imran,
    Thank you.
    I think i have found without looking at OSS Note yet, because Market place is still down
    I have gone to transaction
    RSRTRACE
    and looked at all logs.
    I can see that my log, is datestamped today,
    and i can see that the SET_DRILL_STATE is what action i enacted.
    But going into the log, gets me to the debug.
    Do you know how i can find the web api command that was responsibile for my action within this log area.
    Thank you.
    Simon

  • So where is the forum category for bt web hosting ...

    Where is the forum category for bt web hosting questions?

    Thanks Mazert
    The reason I ask this is because BT Retail Businesshave their own help and support channels which are aimed for their business customers.
    This forum here is for BT Retail residential customers, and therefore the support and knowledge about the BT business webhosting service and domain services are not on this forum.
    To go to the BT Retail Buisness Website hosting & domains forum go to: https://business.forums.bt.com/t5/Website-hosting-domains/bd-p/Webhosting
    for user guides and help on BT Retail Buisness Website hosting & domains go to http://btbusiness.custhelp.com/app/hub/c/1995/session/L2F2LzEvdGltZS8xMzk1NDMzMjUwL3NpZC9mZXk5d1BQbA...
    jac_95 | BT.com Help Site | BT Service Status
    Someone Solved Your Question?
    Please let other members know by clicking on ’Mark as Accepted Solution’
    Try a Search
    See if someone in the community had the same problem and how they got it resolved.

  • Is there a way to prevent Robohelp WebHelp from appending characters to the end of the URL address for a TOC Entry?

    I am running RoboHelp 10 on Windows 7 Enterprise SP1 64 bit OS.
    WebHelp is appending characters to the end of the TOC entry's URL address. The characters "bc-n" where n is a number are being generated for all of the TOC Page Entries when I generate WebHelp output. We are exporting the HTML files for import into an application. The TOC Page Properties Link to: property does not contain the characters in RoboHelp.
    We have standardized names defined for our application and the appended characters are not going to work in the application.
    cid:[email protected]
    When I use the generated html output in IE10 Version 10.0.9200.16635 Update Versions: 10.0.7 (KB2846071) the characters show up in the URL when I hover the mouse over the TOC entry as shown in the screenshot below.
    cid:[email protected]
    The two screenshots show that the Link to property does not have the characters "bc-7" but the URL address does.
    Is there a setting or way to configure RoboHelp to prevent Robohelp WebHelp from generating and appending characters to the end of the URL address for TOC Entries?

    I have never known Rh add any characters so I think something else is at play here. Please open one of the sample projects and see what happens there. Click Open on the RoboHelp Starter page and then click Samples in the ribbon on the left.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • Where are the epson drivers for Mavericks for the artisan 835

    Where are the epson drivers for Mavericks for the artisan 835

    OMT8 wrote:
    Well, I have this printer too, and I get the following response from the System Prefs Printers and Scanners when I select to add this printer:
    "The software for this printer is currently unavailable. Please contact the printer’s manufacturer for the latest software."
    When you go to the Epson website for this particular printer it says:
    "The latest drivers for this product are available only via Apple's Software Update."
    And finally, when you go to Software Update it says: "No updates available"
    I second OMT8.
    Yes, the driver file at http://support.apple.com/kb/DL1398 allowed me to finally install my printer, but does Apple have _any idea_ how long it takes to download a 1.08GB file over a 1.5mbps DSL connection?
    Never mind how much of my pricey new SSD is being consumed by the resulting 1.80GB of driver files all for _one_ printer driver that should maybe occupy 200K?
    Or that the primary article on OS X printer drivers (http://support.apple.com/kb/HT3669) -- which does indicate that the Artisan 830 is supported -- does not mention or link to the driver file that's needed to make it work?
    Or what a complete violation of Apple's "it just works" gestalt it is to be confronted with the above Catch-22 and to have to search the web and then go through all of the above to make a new laptop talk to a two-year-old printer?
    Yes, my printer now works, and yes, Apple's Support Communities were instrumental in getting to this point. But spending all morning (plus download time) getting a printer driver installed tastes way too much like I paid for Apple and got Microsquish.
    -carl-

  • Where is the official documentation for Wireless OTA Enterprise App Distribution?

    Where is the official documentation for Wireless OTA Enterprise App Distribution? It used to be here:
    http://developer.apple.com/library/ios/#featuredarticles/FA_Wireless_Enterprise_ App_Distribution/Introduction/Introduction.html
    The above link is present in many posts in these forums (cf. More Like This below this question.
    The information I seek may also have been here:
    http://support.apple.com/kb/index?page=answerlink&url=http://manuals.info.apple. com/en_US/Enterprise_Deployment_Guide.pd…
    The article in question had official details on
    the itms-services:// link,
    the app manifest file format and
    the general information.
    Currently I cannot find anything official on enterprise app distribution - only third party information. Has something changed, or is this a documentation glitch? Surely wireless OTA enterprise app distribution is still available via the enterprise developer program?
    Note: We currently use this for one of our enterprise clients. But before recommending other clients to join the enterprise developer program, we would like an official citation on whether this mechanism still exists.

    OK, the link in my question is no longer a 404. It's been replaced by a redirect to a new iOS Enterprise Deployment subsite which has been remade for iOS 8.
    http://www.apple.com/iphone/business/it/deployment.html
    My actual question about the technical reference is now located in the iOS Deployment Reference section of Apple Help:
    https://help.apple.com/deployment/ios/#/apda0e3426d7

  • Where is the best place for suggestiong requesting features?

    Where is the best place for suggesting/requesting features?
    If something like this already exists, please let me know.
    I often wish when I select a word to right click and choose dictionary to to find out the meaning of the word. Currently I have to copy, go to a dictionary web page, paste and search. And I spent a lot of time for that. I'm not that technically oriented to suggest how this can be achieved but just as an idea, may be Mozilla can partner with dictionary web sites by making a plug ins or include a dictionary with Firefox itself

    I am sure there are Extensions that do this.
    DictionarySearch - https://addons.mozilla.org/en-US/firefox/addon/68/
    Add-on search for Dictionary - https://addons.mozilla.org/en-US/firefox/search/?q=dictionary&cat=all&lver=any&pid=1&sort=&pp=20&lup=&advanced=
    Feedback - http://hendrix.mozilla.org/

  • WD ABAP - Reading the URL Parameters for FPM application

    Hi,
    As per the Custom requirment,
    I want to pass URL parameters for WD ABAP application (sap/bc/webdynpro/dbm/app_veh_cus_search) which uses FPM.
    example: sap/bc/webdynpro/dbm/app_veh_cus_search?Customer=12345&fromExternal=true
    I am facing difficulty in reading the URL parameters.
    How to read/get the URL Parameters for an FPM WD ABAP application????
    Observation:
    I tried reading the parameter in Window --> HANDLEDEFAULT method. But could NOT read the Parameters from here for FPM application whereas if I create a Z Custom application then I could read the URL Parameters. so the issue is in reading the URL Parameters for FPM application.
    Kindly support
    Regards,
    Hussain

    Hi Hussain,
    You can do this either with the methods of interface if_fpm_parameter...
    DATA lo_param TYPE REF TO if_fpm_parameter.
    lo_param = cl_fpm_factory=>get_instance( )->mo_app_parameter.
    CALL METHOD lo_param->get_value
        EXPORTING
            iv_key   = parameter_name
        IMPORTING
            ev_value = parameter_value.
    or a more generic approach using class cl_wd_runtime_services...
    cl_wd_runtime_services=>get_url_parameter
    Cheers,
    Amy

  • Where is the default location for the OC4J logs?

    Where is the default location for the OC4J logs?

    Depends on what variant of the product you are using.
    In an Oracle Applicaiton Server environment (ie the one you install versus unzip) the stdout/stderr streams from OC4J are captured in the $ORACLE_HOME/opmn/logs/<group-instance> directory.
    If you are using standalone then stdout goes to the console where you started the process.
    The logs for the OC4J instance itself are located in $ORACLE_HOME/j2ee/home/log/<instance_group> directory. In this directory you'll see different logs for differet areas of the server. Most of the logs however are captured in the oc4j sub-directory in the log.xml file. Whenever you enable an OC4J component logger in the j2ee-logging.xml file or via ASControl, this is where the logs will end up.
    Take a look at the $ORACLE_HOME/j2ee/home/config/j2ee-logging.xml file -- the log handlers will give you some idea on the different log files that are in use.
    You can configure your application loggers to also direct their log into this file if you wish. See http://buttso.blogspot.com/2007/09/directing-log-messages-into-oc4j.html for an example.

  • Where is the background picture for a window stored?

    Greetings,
    Where is the background picture for a window stored? What is the file called? I am trying to find the image used on a DVD.
    Thanks

    when you set a picture to be a background of some folder that picture is not moved from its original location. instead a record is made in the .DS_Store file of that folder indicating that this picture is the one to be used for the background. in case of the DVD it is likely sitting in some hidden folder right on the DVD.
    run the following terminal command to enable showing hidden files in finder
    defaults write com.apple.finder AppleShowAllFiles 1; killall Finder
    then look on the dvd and the picture should be there somewhere. if you still can't find it open the .DS_store file of the folder in question using Text Editor. a lot of this file will be unreadable but the picture path will be present in plain text.
    when done rerun the above command after changing 1 to 0.

  • WHERE IS THE REFRESH BUTTON FOR THE SIXTH TIME

    Where is the refresh button for the seventh time. I cannot refresh

    In addition to the above posted by James:
    Click the Refresh button on the right hand side of the location bar container on the Navigation Toolbar or press "Ctrl + R" or F5 to reload a web page.
    Firefox 4 later use a combined Stop/Reload/Go button that is positioned at the right end of the location bar.<br />
    During the page load process it shows as a Stop button and after the loading has finished the button is changed to a Reload button.<br />
    If you type in the location bar then that button becomes a Go button.<br />
    Middle-click the Reload button to duplicate the current tab to a new tab.<br />

  • Where is the "repeat" button for songs/albums/playlists?

    Where is the "repeat" button for songs/albums/playlists? It used to be next to the random play button.

    You can access the repeat options if you right-click on the shuffle icon, or if menus are enabled you can use
    Controls > Repeat > Off | All | One.
    Once the control is visible you can click it to switch between states as before. If the control is turned to off it disappears on the next track change. In contrast the shuffle control remains visible whenever it is appropriate. Hopefully the next release will fix this.
    tt2

  • Where is the download link for SCEP Client Offline installer for x86 & x64 altest greatest version (4.6.305 as of today)

    Where is the download link for SCEP Client Offline installer for x86 & x64 latest greatest version (4.6.305 as of today)?
    The answer IS NOT IT AND NEVER WILL BE "DOES NOT EXIST"!!!!!! MUST NEVER NEED TO RUN UPDATES TO GET IT!!!!!!!!! THE ONLY ACCEPTABLE ANSWER IS THE LINK!!!!! DUH GET YOUR ACT IN GEAR MS!!!!!!!!!!
    Ralph

    Thanks to all for the information. I work in higher ed. We have SCCM latest version, fully licensed. Unfortunately the individual who manages the SC does not have a clue as to where to find the SCEP installer. I sent him links from MS that shows him where
    it is supposed to be. The version he say's is on our SC Management server is 4.3. I, in the past, was able to get 4.5 independent of him and it has been working well for me but it is time to use the latest greatest version instead. I should just as easily
    be able to get 4.6. As far as licensing goes, if the product was correctly designed it should just work itself out just like it does for the 4.5 version I was able to easily find and download.
    As for the link given by KevinMJohnston, thanks by the way, its the closest I have come to getting what I need but all I get is a spinning wheel in Firefox, the only browser one should ever need. In IE I get prompted for an email address, which it should
    NEVER EVER DO!!!!!!!!!! I did give them my address, but alas, after waiting over 30 mins. I still don't have a link to the update or the CU4 Config MGR update mentioned. (Another reason I am not very nice to MS, along with, see below...) Please send me the
    link that they are suppose to send me in the email.
    As for the intensity of the request it comes from not being able to find the update on my own. (Amongst a million other complaints as MS makes my job harder and harder, just think of all the lost productivity and extra repair efforts needed because MS stopped
    allowing you to do upgrade/repair installs from the install discs. You have to have a working OS to do it, or you will lose your settings etc and will have to re-install all of your software etc. How STUPID IS THAT! Can't use it to fix a blown driver or BSOD
    problem like you could in XP.  There is no excuse for that, I know better. So you can see why I have nothing good to say about MS etc etc.) There is no excuse for that! If the MS updater has it available then IT MUST BE MADE AVAILABLE FOR STANDALONE DOWNLOAD
    PERIOD. That goes for ALL updates PERIOD.  I use these updates and many others etc so that once I seal an image for a PC it has the latest greatest version of everything. It is quicker to get it stand alone in advance and installing than waiting for MS
    updates to do so. Also I prefer to config my images so that the Av installs after first boot. These are cloned PCs. Many of these PC are used in labs and are frozen. Here, the settings for the SCEP AV being pushed from above can cause major problems for the
    users i.e. the scheduled scan feature. If it is on when students are taking tests and they take more than 5 or 10 mins on question MS is stupid enough to start scanning causing the system to become unresponsive. This has caused students to breakdown in tears
    thinking the system is hosed and they just lost their tests. I have to do some creative reg hack, setting owner as "Guest", a disabled account, etc. to keep these settings from being changed. (Our SC managers push policies that work for the faculty
    but break the lab systems which are frozen, so I have to out hack them, should not be, but it is, we are trying to get that fixed, but bureaucracy and people afraid to share power etc makes it hard.)  These settings unfortunately will prevent the AV from
    installing so I need to be able to manually do it after I have set the reg to allow it.  And I could go on. Who knows when or why someone may need to do a manual update of something. I just had 3 systems fail 12 updates, yet when I manually downloaded
    them and installed them they ALL installed without failure. I did NOTHING in between the auto update and the manual, yet it was the manual way that worked. Maybe if MS could fix those kind of issues then no one would need to get stand alone update files.)
    That is not for MS to worry about. It is, however, their responsibility to make it so that I can choose what will work best for my environment, which only I could know. DUH. I have had issues in the past with MS AV and other brands being installed before "sealing"
    the images. etc. etc. etc.
    As you can see, there is not enough space on the world wide web to list all thousands of legitimate reasons to give Microsoft a hard time so I will do so on a case by case bases knowing I am probably spitting in to the wind, but hey somebody has to have
    the guts to do it. MS MUST NEVER BE ALLOWED TO SIMPLY GET AWAY WITH IT! They Must be called to the proverbial carpet.
    Maybe if people who are MVPs would not be afraid to join the choruses they would be embarrassed, (though it should be done out of moral obligation not embarrassment), enough to fix these obviously fixable problems etc. etc. etc. I have over 30 years in the
    IT business, the IBM XT did not exist until my senior year in college. You are not going to be able to convince me that there is a legitimate reason, copy protection IS NOT IT, to prevent me from fixing blown OS via re-install using install disc when OS will
    not boot. Nor are you going to be able to find legitimate reason for the SCEP 4.6.305 update to be so hard to get.
    Thanks again for the help, still waiting for email from MS, NOT COOL MS! NO EXCUSE!!!!!
    Ralph

  • Experts - where are the main settings for country currency settings

    Hi
    where are the main settings for different country currency settings.
    Ex:
    us,canada and europe customers us$, canada $, europe euro,
    How the pricing will effect for different country customers?
    Any one can help me on this.
    Any documents on thes please send to [email protected]
    Thanks
    Kris

    You can find this in the following path.
    SPRO->GENERAL SETTINGS> SET COUNTRIES>DEFINE COUNTRIES-->
    Here countries have an ISO CODE
    Then
    SPRO->GENERAL SETTINGS>CURRENCIES-->CHECK CURRENCY CODES
    Here ISO codes mapped to currencies.
    If CCode currency = Customer master currency, then transactions will happens in that currency
    If CCode currency<> Customer master currency, then the exchange rate will come into play to convert customer currency to company code currency.
    And anway if you want a different currency from the country currency, you can mention that in ccode configuration. The presence of currency in company code configuration is must and hence configuration at country level is not needed I think
    Hope this helps.
    Rewards pls
    Message was edited by:
            Navaneetha Krishnan

Maybe you are looking for