Where is version number stored?

I am using Adobe Director 11 to build an application which contains PDFs published by our company. I am using an XTRA to determine which version of Adobe Reader is installed on the end-users computer- our PDFs require version 7 or higher. My question is- where does Adobe store the version of Adobe Reader? In the registry? If so where? Is this consistent with all versions of Adobe Acrobat Reader?

mgalla3327 wrote:Jon,Thank you for the help, you were right on!Is it the IOS version causing me to have to go into vlan database to get to the commands?Just curious...Thanks again...
Matt
vlan database mode used to be the way to configure vlan/vtp information in IOS based switches. Then Cisco added the ability to use config mode to configure vlans. Some old switches like the 3524xl only support vlan database mode. Most newer switches support both but give you a warning message if you try to use vlan database about it being depreciated and to use config mode instead.
Jon

Similar Messages

Where is Check number stored in Fusion Payroll

Hello All,
I am working on an Positive Pay file that is sent to the Bank after the payroll process and I need the check number details, but not sue where it is stored.
Can some one let me know where is the Check Number stored in the HCM tables.
In EBS
Check Numbers are in the field SERIAL_NUMBER on the PAY_ASSIGNMENT_ACTIONS table.
Serial Number in Pay_Assignment_Actions is where the check numbers are held. When Check Writer is run, the process requests STARTING and ENDING Check Numbers (Ending Check Number can be left blank).
But I am able to find the serial number in PAY_PAYROLL_REL_ACTIONS which is the payment reference and doesn't match the Check numbers that are generated.
Can any one please let me know where to find this information.
Appreciate all your inputs

>
Edward wrote:
> Dear All exprt,
>
> In Payroll , for basic pay there is a Indicator for indirect valuation. If this indicator is marked as 'I', the amount of basic pay will not be stored in table pa0008. But when we use PA20 , We can see the amount.Is there any table which store this kind of data?
>
> BR
I'm not sure if this gets stored in some database tables, I believe that this information is evaluated in the runtime(i.e., when accessed from 'PA20') using the wage type characteristics(v_t511).
The function module 'RP_FILL_WAGE_TYPE_TABLE' returns the values of indirectly evaluated wage types also.
The (indirect)evaluations of the wage types take place in the subroutine 'EVALUATE_INDEV_TAB' of the function group 'RPIB'. (Include program : LRPIBFXX)
Refer this thread
Re: Indirect Valuation Error Message in IT 0008
Regards
Rajesh.
Edited by: Rajesh on May 31, 2009 2:03 PM
reference thread added

MIR7 Park Invoice - where is PO number stored?

Hi all,
When registering an invoice in transaction MIR7, I can enter one or more PO numbers in the field "Purchase Order/Scheduling Agreement" on the "PO Reference" tab. If I temporary save the invoice, then in which table is the link between the Invoice No. and the PO numbmer stored?
All invoices appear in table RBKP, but not always in table RSEG (which contains the PO number).
Same goes for EKBE, it contains quite a few of the invoices, but not all of them.
Your help is much appreciated!
Kind regards,
Bas

Bas,
You should find the PO numbers for the parked invoices in table RBSELBEST or RSEG. If the invoice is for a service entry sheet, you can can the SES number from table RBSELERFB and then subsequently get the PO number from table ESSR.
You will not have entries in RSEG only if you park the invoice without any item reference. In this case, you will not have a PO number associated with the invoice.
Hope this helps.
H Narayan

WRT54G Version number not shown on sticker underneath the device?

Hi All,
First post.. I had looked through the FAQ w/o any answers.
I have had my WRT54G for at least 3 years and had previously upgraded my firmware to 4.20.7.. just wanted to upgrade it again to 4.21.1 but acutally did not realize which version of the firmware I last used. Looking at the sticker underneath the device, it only shows WRT54G but does not show a version number... are there any other places where the version number is shown? I looked all over but was unable to do so.
I supposed my version must be the "earlier" ones... are they "bad" consequences for flashing the wrong version number's firmware?
Thank you all in advance.

If it does'nt have a version with the model number of your router...then it is a version 1.... you can also verify this by the serial number....you can lookup wikipedia and find WRT54G there....they have a listing of these serial numbers with corresponding version numbers....but if you can see now that it does not have a version, pretty sure its a version 1....
"You tried your best and you failed miserably! "

Lost Version Number for Tiger with recent update?

I have a VERY odd problem after the most recent Tiger security update. The version number of the OS is MISSING -- it is not there. As a result, Safari, Photoshop, Illustrator and a ton of other applications will not launch, saying that they need at least 10.4 to run. When I go to the About This Mac dialog, there is literally just a blank space where the version number would be. Any way to fix this besides a reinstall?

I don't know if this is the only file or the critical one, but /system/library/core services/SystemVersion.plist has an OS version number. I warn you though, messing with any system files is tricky and I would definitely back up before doing any editing. I also don't think this is the route to go. Very likely something more is missing as a result of an unsuccessful update and you may end up having to do an archive and install anyway. Have you tried repairing the drive with Disk Utility (the drive, not the permissions)?
If you're determined to go the editing route I would just try replacing that one file with a copy from your backup (you do have one for just this kind of occurrence, don't you?).

Where can I find a mapping of the Mac Powerbook version number (e.g., 3.1) to the dates (e.g., "late 2007") that Apple uses for indicating compatibilty with OS upgrades?

Where can I find a mapping of the Mac Powerbook version number (e.g., 3.1) to the dates (e.g., "late 2007") that Apple uses for indicating compatibilty with OS upgrades?

There were no PowerBooks made in 2007. By then Apple had switched over to Intel and they were making MacBook instead.
If the MacBook is what you really want try http://en.wikipedia.org/wiki/MacBook
Allan

I am trying to recover a backed up version of my iphone. Does anyone know where the backups are stored? thanks

am trying to recover a backed up version of my iphone. Does anyone know where the backups are stored? thanks

Backing up, updating, and restoring iPad, iPod touch, and iPhone software
more detailed information about backing up

I have an older airport express but don't know where to look to find its model number. The version number is airport utility 6.3.4 (634.17). Can anyone point me in the right direction? Thanks.

I have an older airport express, but don't know where to look to find its model number.
The version number is airport utility 6.3.4 (634.17).
Can anyone point me in the right direction? Thanks.

Hard to see it's so teeny. I needed a magnifying glass.
FWIW, you should not mark your reply as Solved because you did not solve your question. Helpful and Solved are used to reward the user who help you or solved your problem.

Where does Reader pull the version number

I use Zenworks to patch my Adobe Reader installs. I would like to push only to machines that have do not have version 9.1.2 yet as we have a lot of shared machines and the patch would push for each user. I can not figure out a file to point to and can not determine where the version is pulled from, the version that you see in add/remove programs.
Thanks

I apologize for posting on the wrong forum.
The problem with the activation/deactivation of PSE8 was solved, but first I will explain in detail what the problem was since all Adobe applications go through the same process (serial number activation/deactivation).
ORIGINAL PROBLEM: I had installed PSE8 twice and then deinstalled it at later dates. However, deinstalling an Adobe application does not deactivate the serial number (this number is left behind somewhere in the system along a few other files). So, I installed CS5 on this iMac a few months ago, and got rid of PSE8. Then a few weeks ago I bought another iMac and installed PSE8 on it, and here is where the problem began. When launching PSE8 on this iMac, a window would appear on the screen indicating that I already had the same serial number installed in two other computers, and that therefore I had 30 days to solve the problem.
SOLUTION:
a. Reinstalled PSE8 on the older iMac, launched it, and then chose "Deactivate" from the Help Menu and proceeded to deactivate PSE8
b. Then I "deinstalled" PSE8 from this iMac, since I don't need it (I have CS5 on it)
c. Launched PSE8 in the new iMac, and chose "Activate Serial Number" on the window mentioned in the last sentence of the "Original Problem" above, and this time it accepted the serial number because it could not find it in the older iMac that was still on my home network
I hope that this could be of help to others.

Where can I find the WEP password/number stored on my mac

Where can I find the WEP password/number stored on my mac.?

Assuming you saved it it will be in your Keychain (Applications > Utilities > Keychain Access)
Regards,
Shawn

Where do I find the version number of the latest version of Firefox before downloading?

I must request permission to download Firefox at work and IT needs version number before granting permission. Texas regulatory agencies use Firefox and work only allows microsoft internet explorer. To use the agencies models and reports I need Firefox. The website for downloading does not list the version number. Where do I find the version number of the latest version of Firefox before downloading?

You can find the latest Firefox 20.0.x release in all languages and for all Operating Systems here:
*http://www.mozilla.org/en-US/firefox/all.html
If you hover a download link the you should see the Firefox version in the pop-up at the bottom of the screen.

Where is the EXACT version number shown? Where is the menu link to the Help file? Why is there no scroll bar? The new iTunes is terrible in more ways than I can list... how do I switch back to version 10?

The newest iTunes version has no Help option. Why? And, no ability to find out the version number.
The new iTunes, when in album view in Windows 7, has NO SCROLLBARS, so it is impossible to scroll the albums. Why?
Answer these questions, as I am an AAPL shareholder and I am NOT happy with these and other changes you've made to iTunes.

The newest iTunes version has no Help option. Why? And, no ability to find out the version number.
You may need to bring up your Menu Bar to see the Help menu.
If you're using 11.0.x, click on the wee boxy icon up in the top-left corner of your iTunes to see the "Show Menu Bar" control, as per the following screenshot:
Once you've got your Help menu showing, go "Help > About iTunes" and wait for the version number to scroll up from the bottom of the screen, as per the previous versions.

Where can I find the latest version number in a document in the web? so I can download it with wget to check if the current installed firefox version is up to date and update ir if necessary?

My problem is that I can't find the latest version number in here http://releases.mozilla.org/pub/mozilla.org/firefox/releases/latest/win32 as a document, so I can check against "HKLM\SOFTWARE\Mozilla\Mozilla Firefox\CurrentVersion" and update or not, all this is done by a script. It will be great not have to change the versión number in the script every time there is a new release.
Thanks

I think I solved, all I have to do is this:
//here I download the entire page
wget.exe http://www.mozilla.org/en-US/firefox/all.html -O index
//here I search for the word curVersion and set a variable with the result, which is "10.0.2"
for /f "tokens=3 delims=</> " %%A IN ('type index ^| FIND /I "curVersion" ' ) do set latestversion=%%A
//here I just make sure I get a number
echo "%latestversion%"
pause
Later I check it against the registry and voila! I hope this can help other admins who have the same problem.
Regards.

Where is material revision number stored?

In what table is the material revision number stored (in Engineering Change Management)? I need to pull a list of all materials and their most recent revision number.
Thanks!

CHECK
MARA & AENR tables..

Version number conflicts with NI custom data types

Custom data type version number conflicts
Options
Mark as New
Bookmark
Subscribe
Subscribe to RSS Feed
Highlight
Print
Email to a Friend
Report to a Moderator
07-11-2011 08:10 AM
I am new to Teststand software interface. While doing my first software release under the guidance of a more experienced colleague, we discovered that Teststand will not run if it detects version number conflicts between custom data types on my machine vs. the production test machine. I verified differences between all .seq files in my test program directory, but I did not realize that the version number difference exists in the StationGlobals.ini file, which is stored in a different location. After discovering this, I modified the version number in one of the files. However, two releases later, I discovered that the version number mismatches in another two files. This raises several questions for me :
1. Is there a way in Teststand to view all the .seq files where a custom data type is used and then change its version number in one attempt?
2. Under what instances does Teststand upgrade the version number of a custom data type?
3. Are there any tools or scripts within Teststand that can allow the version number of custom data types to be changed in all .ini files when a difference is discovered between the current production test station settings and a new release?
Please help.

Have you read this? http://zone.ni.com/devzone/cda/tut/p/id/7060
I can tell you that your situation is not uncommon with TestStand. The key is just doing it right the first time. haha
#1- I doubt that this is possible because then TestStand would have to know every location of every .seq on the machine. You will only see it when you open the sequence file.
#2- TestStand updates the version every time you change it. You should get a message popup when you try to save that asks if you want to increment the version or not. There's also a check box that says Remove Modified Mark From Types. Look under Station Options in the File tab. There are some settings there about Type conflicts.
#3- http://zone.ni.com/devzone/cda/tut/p/id/7910
http://digital.ni.com/public.nsf/allkb/4153576DA04BEB098625743D00704A09
Hope this helps,
jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~

Where is version number stored?

Similar Messages

Maybe you are looking for