Where to find readily-available high-res MBP 15' in Hong Kong ?

Hi, I need either a new or a refurb 15" MB in HK with a high-res anti-glare screen.
Any ideas in which store I can find one?
I tried DG but they only have the 2.8 CPU version that sells for HKD $23k, I'm looking for something that will cost me max. HKD $19k
The problem is - it has to be readily available for purchase in a store, as I'm leaving town in 48hrs.
Thank you in advance!

It seems obvious that you have tried _http://store.apple.com/hk_
Maybe that is DG?
Joe
Message was edited by: joeuu

Similar Messages

  • No i-tunes songs available for purchase in Thailand and Hong Kong

    I live in Thailand and also have right of residence in Hong Kong. I can't buy i-tunes songs or albums from either store because they are not made available in these countries. Why not? Copying? Neither can I use my Hong Kong credit card to buy from the UK store what I can't buy in Thailand or Hong Kong. This is crazy. I will no longer be buy the i-pod Touch I planned to give my husband for Xmas.

    Why not?
    Apple doesn't have permission to make enough songs available for sale there to justify opening a music store.
    Neither can I use my Hong Kong credit card to buy from the UK store what I can't buy in Thailand or Hong Kong.
    You need an U.K. credit or gift card and an U.K. address to do that. The people who hold the rights to a song may be different in different countries.
    (38707)

  • I have a new MBP with high-res display, and the color seems washed out compared to my old MBP.  Is this normal?

    Putting the two laptops side by side, blacks on my old machine look dark grey on the new one.  I also have 24" and 27" cinema displays, and the new high res laptop display looks washed out in comparison.
    I have tried to recalibrate the screen color settings, but this doesn't seem to make much difference.
    Any help would be much appreciated!
    Thanks,
    David.

    Yes, the gamma settings are the same on all 4 displays (my two laptops and the two displays).
    After a little experimentation, I think that it's down to the brightness of the high resolution display.  It would seem that it is slightly dimmer than the low-res one on my other 15" MBP, so I think that Apple have set the default colour profile to be slightly washed out to compensate.  If I use the same profile on the high-res MBP screen as on the low-res MBP screen, then the colour is much better.
    The cinema displays are a lot better than the laptop displays, but I was expecting the new high-res display to be as good as the old low-res one - especially as I paid a lot more money for it!
    Ah well!  I think I might take it into the store and just check that it is the norm for this...
    Thanks for your help.

  • HT200285 I want to change my wallpaper to an image that was available before I upgraded to IOS 8.1.3 - a close-up image of long reedy  grasses with hazy light in the background. Greyish hues. Where can find the image & how do I get it back on my phone?

    I want to change my wallpaper to an image that was available
    before I upgraded to IOS 8.1.3 - a close-up image of long reedy  grasses with hazy light in the background.
    Greyish hues. Where can find the image & how do I get it back on my phone?

    I want to change my wallpaper to an image that was available
    before I upgraded to IOS 8.1.3 - a close-up image of long reedy  grasses with hazy light in the background.
    Greyish hues. Where can find the image & how do I get it back on my phone?

  • Quality of MBP 17 (1920x1200) high-res screen at lower res (1680x1050)?

    Just about to buy a 17-inch MBP and intend to generally use it at 1680x1050. But I would sometimes benefit from use (Final Cut Pro) at 1920x1200, so I'm considering the high-res option.
    But I worry that the 1920x1200 native version may not be sharp at a non-native 1680x1050. I would buy the high-res version ONLY if it was equally sharp at 1680x1050. Any 1920x1200 users out there who can comment?
    Thanks much,
    Bradley

    I don't need to specifically work at 1680x1050, it's just what I choose as an example because it's the native res of non high-res 17-inch screen. The issue here is that I'm a film editor who would benefit from high-res for FCP, but I'm also a writer, and I don't want to be working with text that small (not to mention just general use and the GUI) for the rest of my life. No, using larger fonts won't suffice -- I don't want to write in large type, then have to downsize when I send it out, etc. That would not work. I'd rather pass on the 1680x1050. I have big screens for most editing ...
    Sounds already like the answer is that native-is-native. Expect the screen to work very well at whatever its native res is. Switching to other resolutions involves a trade off. OK. I get it.

  • 2010 MBP i7 High Res - Video garbling, screen not refreshing

    I'm having a problem with my 4 month old 15" MPB Core i7 High Res display. Sometimes when I am surfing in Safari, I'll navigate to a new page, but the center 1/3 of the last page I was on will remain on the new page, covering up the new page content with the old page.
    Also, sometimes some images appear as blocks of garbled mess, especially when I quit safari and go back to the desktop such as the screen shot below. Graphics card issue? Often, I'll close Safari, and a chunk of the web page is still on my desktop, and it's all garbled up...it's like the graphics card isn't refreshing that area of the screen.
    See example screen shot:
    http://i53.tinypic.com/2dux4i.jpg

    I am having the same problem with my i7 anti glare...it seems when I use safari and it has flash in the web page this problem occasionally occurs. If I turn automatic graphic switching off and then on it seems to work okay. I posted here:
    http://discussions.apple.com/message.jspa?messageID=12204904#12204904
    Did you return the computer?

  • Macbook Pro High Res Screen getting White Spot/Mura

    I have 2012 MBP with the High res screen. Bought it back in August. I noticed today that I see a little mura/white spot devloping in the screen. Its not noticeable on dark backgrounds, only light colors. But on light colors, its very noticeble. Im still under my year of Apple Care. What is the likeliness they'll replace the screen? Also I added a ssd to my mac via the OWC data doubler, will i need to put the opitcal drive back in before I take it in? WIll they through a fit if they find out?

    I have 2012 MBP with the High res screen. Bought it back in August. I noticed today that I see a little mura/white spot devloping in the screen. Its not noticeable on dark backgrounds, only light colors. But on light colors, its very noticeble. Im still under my year of Apple Care. What is the likeliness they'll replace the screen? Also I added a ssd to my mac via the OWC data doubler, will i need to put the opitcal drive back in before I take it in? WIll they through a fit if they find out?

  • Heritage Mac High-Res. PDFs

    What software do I need to create high-res. PDFs in Mac OS 9? Where can I get it?

    Mac OS 9 and Quark XPress 4 were very respectable in their time, and can still do a fine job of making PDF files. Nothing at all wrong with a balanced old computer doing the same job it always did.
    Where it becomes problematic is if you want to change anything. Because the chances of being able to get hold of software compatible with your system are now quite small. Virtually nobody, and no big companies, are selling stuff for Mac OS 9 any more. (They aren't even selling stuff for much more recent versions of Mac OS X).
    But amazingly, Adobe still do offer the Adobe PostScript driver for Mac OS 9 on their web site, here http://www.adobe.com/support/downloads/product.jsp?product=pdrv&platform=mac
    You can use versions of Acrobat up to 5.0.5.
    If you have Acrobat 4.0, make sure it is updated to 4.0.5, as the Distiller in 4.0.0 was really rather broken. Unfortunately this does not seem to be available any more as a download.

  • Apple MacBook Pro laptop - HIGH RES, widescreen... MAC OSX 10.5.2

    My computer:
    An Apple MacBook Prop 17" widescreen High Res laptop 2.6GHz Intel Core 2 Duo
    My problem:
    As a professional graphic designer I am finding it impossible to design web pages on my high resolution MBP screen. The high resolution settings make web pages look absolutely tiny on the screen (lovely and sharp... but so tiny). My high res MacBook Pro came set at 1920x1200 display resolution. SImply changing the display resolution does NOT do the trick! It just magnifies the pixels. Indeed, Apple suggested I alter the display resolution to see web pages ina standard size however,... as I said before, this just blows-up the web pages and OVER-PIXELATES the image. So I'm now thinking that perhaps a second monitor (just for my web projects) may provide a temporary solution.
    My QUESTION:
    Exactly what other models of separate Apple Mac monitors can I buy (maybe second-hand) that will be compatible with my MBP but still allow me to see things, on that second screen, in a normal size and a standard screen resolution? I presume that an HD Apple home cinema display will still be super high resolution... so would an older model LCD or G5 monitor give me a solution or will I face compatibility issues?
    Please help! Thanks.

    Doesn't have to be an Apple display. Pick up any smaller LCD panel of the size (and resolution) you desire. Your MBP has a DVI output, so it would be easiest to get a display with DVI input, but you can also pick up Apple's DVI-to-VGA adapter and connect to a VGA display as well.
    You can also get a bigger display, one large enough that even at 1920x1200 the pixels would be sufficiently large. A large 1080p television, for example.

  • Looking for a high-res drawing app for the iPad

    I've tried a few of the available iPad drawing apps like Sketchbook Pro and Brushes. It's a little hard to tell, because documentation tends to be short on details, but it appears that most of them (with the exception of Brushes) only let you work and export images at 1024 by 768 resolution. That isn't really high enough resolution for professional work.
    Brushes is the only exception I've found. You work on the iPad in Brushes at 1024 by 768, but they have this OS X app that can convert your exported images to a higher res.
    To me that's crazy awkward and time-consuming, and I think Brushes is OK as a drawing app, but not necessarily what I'm looking for.
    Can anyone give me some better insight into the matter?
    Is there some underlying technical reason that all of these apps have a hard limit of 1024 by 768 resolution?
    Is there an app other than Brushes that can produce pro-level (high resolution) image files on the iPad?
    Thanks,
    JS

    Yubz Magnum really has great sound. They come in four colors too.
    Check out the new remodeled MacOSG website! 24-hour Apple-related news & support.
     MacOSG: An Apple User Group  iTunes: MacOSG Podcast  Follow us on Twitter: MacOSG

  • How to I get high res thumbnail images?

    Just discovered once I've imported images into my library Aperture 3.2.2 (running under 10.7.3) doesn't render high res thumbnail images (when the Browser Thumbnail Resize slider is set to the far right/maximum), even though my "Previews" preference settings are as follows:
    "Use embedded JPEG from camera when possible" is unchecked
    "Don't Limit" for Photo Preview is selected
    Photo Preview quality set to 10
    Deleting and regenerating thumbnails doesn't solve the issue. However, if I delete the photo from the referenced library, then reimport the image, the browser thumbnail image renders sharp. The low res thumbnail is at left; high res thumbnail (after re-import) is at right. Both thumbnails images are sharp when the Browser Thumbnail Resize slider is positioned in the middle. Photos render sharp in the Viewer, regardless.
    Going back through my images, it seems Aperture stopped providing a sharp thumbnail image since around July 2010. Other than updating Aperture, my workflow or supported camera hasn't changed. Couldn't find a reference to this issue in the User Manual. Am I missing something a setting somewhere?
    Thanks,
    Eric

    Its unclear if the command Generate Thumbnails actually does anything if the thumbs already exist and as there isn;t a Delete Thumbnails command like there is a Delete preview command there are only two ways to force a new thumb to be generated.
    One is to import the image again and two is to delete the Thumbnail folder in the Aperture library. I don;t know for sure if this will fix you problem but as I said it is the only way to force the generation of the thumbs.
    If you try this make sure you have a good working backup of the library. Nothing here will normally cause data loss but it is always a good idea before messing with the library.
    Quit Aperture, Highlight the library in the Finder and right click, Select show package contents. One fo the folders you'll see is Thumbnails, delete it. Open Aperture.
    Also be aware that the regeneration of the thumbs will take some time. Depending on the size of the library it could be an all day affair. Aperture is usable while this is going on but it will be slower.

  • Is there a way to publish a high-res .ipa from Flash CS5.5 with AIR for iOS?

    Hello,
    I've developed an app for iOS in Flash specifically for iPad 3's. My client uses SOTI MobiControl as it's mobile device management solution. If I publish out of Flash using AIR SDK 3.1 or newer the app is created and looks high-res on the iPad3. When they try to add the app to SOTI for in-house distribution it errors with the error claiming that "CFBundleDisplayName" has been left blank.
    After having looked into it I've been able to find out that when publishing with versions of the AIR SDK older than 3.0, the info.plist file within the app package includes a CFBundleDisplayName. In versions newer than 3.0 there is no CFBundleDisplayName in the info.plist.
    Is there a way to publish for iOS from Flash utilizing an older version of the AIR SDK and having true high-res graphics that will look proper on an iPad3?
    Thanks in advance for any help.
    Phil

    It's not AIR that's lacking the key in the plist, it must be Flash Pro, although it's just running adt itself. I use AIR 3.4 and I compile via adt command line (because Flash Builder 4.6 still has not been updated to handle warnings from ANEs during compile, grr). I have CFBundleDisplayName in my plist file. Have you tried compiling on the command line?
    Here's an Adobe page with a bunch of examples compiling with ADT on the command line:
    http://help.adobe.com/en_US/air/build/WS901d38e593cd1bac1e63e3d128cdca935b-8000.html
    Being unaware of what in-house distribution system that actually is, I have noted that some people had previous issues submitting apps Flash compiles. Their solution was to rename the AppName.ipa to AppName.zip, extract the Payload folder, copy the AppName.app inside there out, then rename that AppName.app to AppName.ipa. Then it was accepted. Not sure if that old issue still exists.

  • Need Help-Unable to find an available port

    Hi,
    I am Working one BPEL Process where in need to invoke a WebService.
    I was able to deploy my BPEL Process with the Web Service Call but i am getting an error while invoking the Webservice from the Process.
    BPEL PM Version 10.1.2.0.2
    <bindingFault>
    <part name="summary" >
    <summary>Unable to find an available port</summary>
    </part>
    </bindingFault>
    Can you please let me know any work around is needed here.
    Thanks in Advance
    Edited by: user2574568 on Jun 24, 2009 8:28 AM
    Edited by: user2574568 on Jun 24, 2009 12:23 PM

    Include the following jar's in your classpath and re-compile ur code. It should work:
    - commons-discovery.jar
    - servlet-2_2.jar
    - axis.jar
    - saaj.jar
    - jaxrpc.jar

  • Could not find any available Global Catalog in forest when running RemoteMailbox cmdlet

    My current Exchange environment is a hybrid configuration of Office 365, Exchange 2013 hybrid, and Exchange 2007 on-premise.
    I have a script responsible for enabling remote mailboxes and assigning O365 licenses to a list of users; essentially provisioning users an O365 mailbox. This script runs every hour through a defined scheduled task in the Task Scheduler.
    The script is proven to work but will intermittently throw an error on some days: "Could not find any available Global Catalog in forest root.xyz.com"
    Here are the nuances of the error when it does occur:
    It will only throw the error when the script is run via scheduled task - the script will work fine if executed from the command line
    The error occurs when "Enable-RemoteMailbox" or "Get-RemoteMailbox" is called.
    The same error will occur with ANY script that calls "Enable-RemoteMailbox" or "Get-RemoteMailbox" and is ran via scheduled task - even when the RemoteMailbox cmdlet was the only line in the script
    Here is the output and error when Get-RemoteMailbox -verbose is ran:
    VERBOSE: [15:49:52.474 GMT] Get-RemoteMailbox : Active Directory session
    settings for 'Get-RemoteMailbox' are: View Entire Forest: 'True',
    VERBOSE: [15:49:52.489 GMT] 
    Get-RemoteMailbox : Runspace context: Executing
    user: , 
    Executing user organization: , 
    Current organization: , 
    RBAC-enabled:Disabled.
    VERBOSE: [15:49:52.489 GMT] Get-RemoteMailbox : Beginning processing
    VERBOSE: [15:49:52.521 GMT] Get-RemoteMailbox : Current ScopeSet is: {
    Recipient Read Scope: {{, }}, 
    Recipient Write Scopes: {{, }}, Configuration Read Scope: {{, }}, 
    Configuration Write Scope(s): {{, }, }, 
    Exclusive Recipient Scope(s): {}, 
    Exclusive Configuration Scope(s): {} }
    VERBOSE: [15:49:52.521 GMT] Get-RemoteMailbox : Resolved current organization: .
    VERBOSE: [15:49:52.521 GMT] Get-RemoteMailbox : Searching objects "abose" of type "ADUser" under the root "$null".
    VERBOSE: [15:49:52.536 GMT] Get-RemoteMailbox : Previous operation run on global catalog server 'evw-xyzdc-p02.ad.xyz.com'.
    Get-RemoteMailbox : Could not find any available Global Catalog in forest root.xyz.com.
    At C:\IDM_In\Scripts\MinimalTest.ps1:42 char:14
    + $abose = Get-RemoteMailbox 'abose' -verbose
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo : NotSpecified: (:) [Get-RemoteMailbox], ADTransientException
    + FullyQualifiedErrorId : E421EF0B,Microsoft.Exchange.Management.RecipientTasks.GetRemoteMailbox
    VERBOSE: [15:49:52.567 GMT] Get-RemoteMailbox : Ending processing
    What could be the cause of this intermittent error?
    Thanks for any help

    looks to me permission error as when you are running it via a schedule task is is not able to call exchange shell/ commands {confirm this} where as when you running this manually looks to me you open exchange shell, may be as admin also and then running
    the script.
    schedule task process is not able to get the permission..
    MARK AS USEFUL/ANSWER IF IT DID
    Thanks
    Happiness Always
    Jatin

  • Userform controls disappearing in Word 2013/Windows 8.1 with High-Res display - DLL error?

    I have a .dotm file with a large number of modules and userforms. Creating new documents from the template works fine on almost every computer I've tested it on (hundreds), but I've run into a setup that fails consistently.
    Two different Samsung ATIV 9's with a high res display and Windows 8 (64bit)/Office 2013 show the same problem:
    When opening a new document based on the template for the first time, it works fine. If I open the VB editor, everything looks normal, userforms are intact.
    On the second and all consecutive attempts, it throws a "Type Mismatch" error. Opening the VB Editor, I get a compile error on lines of code referencing components of the first userform (alphabetically). Opening that userform, it shows only a blank
    multi-page control, and all the other controls are missing - hence the new compile errors on controls that used to exist. If I remove that userform and save the file, the project compiles, but opening a new document from the template will result in "Word
    has stopped working..."
    I can actually reproduce this behavior starting from scratch - new blank document, save as a .dotm. Create a new userform and add a multipage control. Clicking any control in the toolbox to add it to the form will result in a "Type Mismatch" error,
    even though there's no VBA code. I can then successfully add the control to the form. But, once I save and reopen the template, the multi-page control is blank, and the other controls I put on it disappear.
    I at one point got an error from the VB Editor that it "could not open macro storage" and the included help suggested that might be due to an incorrect version of vbe7.dll.
    The only copy of vbe7.dll I could find was at:
    c:\Program Files\Microsoft Office 15\root\vfs\ProgramFilesCommonX86\Microsoft Shared\VBA\VBA7.1
    The dll version was 7.1.10.44
    I tried replacing that file with a vbe7.dll file from a working computer (version 7.0.15.89 from c:\Program Files (x86)\Common Files\microsoft shared\VBA\VBA7), but that just resulted in the VB editor not loading at all.
    I have tried both a 32bit Click-to-run version of Office 2013, and installing off a CD with 64bit Office 2013, both had exactly the same error.
    The reason I'm wondering if it's a high-DPI display related error is that googling about vbe7.dll errors, I came across this hotfix:
    http://support.microsoft.com/kb/2880496/en-us
    which claims it "Fixes various Visual Basic for Applications (VBA) issues with displays on high-DPI devices."
    Neither the 32bit or 64bit installer for that hotfix would run, they said there was no affected programs installed.
    My reasoning for suspecting a hardware/DLL incompatibility is this:
    1) It's not the template or the VBA code, since those work elsewhere and the same behavior happens with any file with a userform
    2) It's not the Office version, since both 32/64 bit, MSI and Click-to-run didn't work
    3) It's not Windows 8.1, since this same template works fine on other machines
    4) The first time I open the template on the affected machines, it works fine - but the template is shipped compacted and decompiled. After I open it once and then close, Word has compiled the code and corrupted it somehow, because whatever the first userform
    was in the list shows up as blank.
    5) It feels hardware-specific, since out of hundreds of machines, I've only seen this behavior on two of the same laptop model - seems like too much of a coincidence.
    Is there any chance the VBE in Office 2013 is somehow incompatible with this hardware? If that might be the case, does anyone have any idea how I'd go about testing and/or fixing it?
    Any thoughts are much appreciated.

    Hi Chris,
    Try the following.
    Download the IDT Audio installer on the link below and save it to your Downloads folder.
    http://ftp.hp.com/pub/softpaq/sp59501-60000/sp59861.exe
    When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers.  If you see an entry for IDT HD Audio ( or very similar IDT entry ), right click the device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.  If there was no IDT entry, just proceed below.
    When complete, shut down the notebook, unplug the AC Adapter and then remove the battery.  Hold down the Power button for 30 seconds.  Re-insert the battery and plug in the AC Adapter.
    Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu.  Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter.  Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
    Let Windows fully load - it will automatically load an audio driver, but just let this complete.  Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation.  When this has completed, right click the speaker icon in the Taskbar and select Playback Devices.  Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

Maybe you are looking for