Where we maintain the CST & VAT numbers for a plant which is not a register

Hi All,
Where we maintain the CST & VAT numbers for a plant which is not a registered for Excise?
we are printing it on the invoice output. on debugging it is known that it comes from the table AUSP, after checking the table CABN.
Any body knows about these two tables? let me know the purpose of these tables
thanks in advance,
Venkat

Mr Big Screams.....
I hope you have neigther read my reply completely nor understood correctly.
Let me tell you, maintaining record in J1ID in Plant address details doesnt declared that plant is registered under Excise act until unless you maintain ECC details. ( ECC -Excise Control Code number which will be alloted by the Central Excise dept).
You will find CST / VAT fields in J1ID which is actually given to maintain Plant address details for INDIA localization.
Hope its clear.
Regards,
Reazuddin MD

Similar Messages

During installation of Adobe Photoshop Lightroom 4 the program is searching for msvr100.dll which is not available in windows 7 files. What to do?

During installation from DVD of Adobe Photoshop Lightroom 4 the program is searching for msvr100.dll which is not available in my Windows 7 files. What to do?

This provides those files Error "Unable to start correctly - 0Xc00007b"

To enter two VAT numbers for one vendor in the same country

Hello All,
When we try to enter two VAT numbers for one vendor in the master record and belongs to the same country, the system is not allowing and gives the following message,
"VAT reg.no. already exists for country BE"
Message no. F2140
Kkindly let me know the way to proceed further.
Many thanks in advance.

Hello,
Go to OBA5 and switch off the message for online and batch entries.
If the message is already not there in OBA5,
Then go to OBMSG and switch off the same.
Application Area F2
Message No.140
Regards,
Ravi

Where we maintain the cost of characteristics values in variant conf.

Hello guys,
This thread i have posted many times in sdn , but never got the satisfactory answer.This time again i am trying my luck.
    Actually i am unable to understand how costing takes place in variant configuration.
    Suppose i have created one sales order for configurable material and there we select all the characteristics values which we want.
But we don't maintain the prices of these characteristics values anywhere.So when i create the sales order than how the sales people calculate the cost of that order.
    Take a example of computer.For making computer,i want cabinet, processor, Harddisk, Ram, which are available in many sizes.So What we do that we create one configurable material and inside it we maintain all this characteristics and its values.And then i create one sales order for that configurable material and select the suitable characteristics and its values as reqd my customer.
     Now my question is how they cost that sales order?As we don't maintain the Accounting and costing view in material master of configurable material.
   So where to maintain the prices of these characteristics values?
        Plz guide.

Hi
You can make the price of a variant dependent on the characteristic values assigned (Pricing).You can use
variant conditions to define surcharges and discounts for a variant
Variant u2013Pricing steps
Create condition record
create a procedure where you enter the reference from the characteristic
Assign the procedures to either the characteristic values
configure the material in the sales order
The net price for the material is displayed
If a value that triggers a variant condition is selected when configuring a material in a sales order, the price of the material displayed under Net value is automatically increased or reduced.
In addition, the Conditions pushbutton is displayed.
On pressing this pushbutton,
One can see which conditions have
influenced the price.
I tried to list you as much detail as possible. Hope that you will be able to resolve your issue
Thanks

SAP PP: In BOM how to where to maintain the details like Length, Width and Quantity

Dear All,
In SAP PP where to maintain the details like Length, Width, Quantity of the material for production information.
Eg:
Client will procure a material of 10milli meter Thickness Mild Steel material of fixed dimensions lets say 4meters x 4Meters
{so the material dimensions are 4000Milli Meter (Length) x 4000Milli Meter (Height) x 10milli meter (Breadth) Mild steel Sheet}
For production the above plate is to cut into desired sizes as per the drawings given by Design Department of "N" no qtys.
(let say in drg for the component the desired sizes are 1000Milli Meter (Length) x 1000Milli Meter (Height) x 10milli meter (Breadth) of 4Nos}
In BOM where all we can maintain the above details. The same details wants to send it to production for their quick reference.
Also how the system will calculate the weight automatically for procuring of raw material with the above details.
Note: Purchase department will procure the full length as i mentioned above but not the desired lengths to be produce for production.
Pls let me know if any further information required for the solution to suggest.
rgds,
VKUMAR A

Hi,
You can use two options...
1. Classification...create characteristics like length, height and breadth with CT04, assign these chars to class (CL01) and assign this class to your raw material in classification view in material master (MM02). When you receive the material from vendor during GR enter the values for characteristics. (activate Batch management).
Now when you create the Production Order, in the components for this raw material, assign the batch..
When this is issued against the Production order , production people can see the details of values in the batch...
2. Try to explore the option of variable size item concept during creation of BOM..
Thanks
Kumar

I have 3 i phones. Can I have multiple accounts on one computer where it keeps the contacta and calendar for each?

I have 3 i phones. Can I have multiple accounts on one computer where it keeps the contacta and calendar for each?

My daughter and I both have iphones. I created an account (not separate itunes) for her on my computer so she could sync her phone/itunes but not have it interfere with mine since we have WAY different taste in music. Creating a different computer profile should work if you have separate itunes accounts, too.
If you all use the same itunes account, you can turn on Home Sharing. That way you can all download the same content without having to pay for it again. Not sure how or if that works with separate itunes accounts.
Hope that helps!

FI:where to maintain the data of "Group account number"?

Hi.When I use the T-CODE FS00 to create G/L account,the sap require me to Make an entry in field "Group account number".But when I press F4 on the field "Group account number",the sap tell me there is no values.So I need to maintain the data of "Group account number".But I don't know where to maintain the data of "Group account number".So I need someone give me the T-CODE or some advice.Thanks so much.

Hi,
You have activated group account number. If you have any grp account number of your company please provide the group company account number.
Else if you dont want to give group account number
In T-code: OB13 remove group chart of accounts from your chart of accounts
Best Regards
Ashish Jain
Message was edited by:
Ashish Bohara

I need to update to the latest version of Snow Leapord-currently running v10.6. Because of where we live the slow download speed for such a large file has kept me from downloading the update. What can I do short of hooking up computer elsewhere?

I need to update to the latest version of Snow Leapord-currently running v10.6. Because of where we live the slow download speed for such a large file has kept me from downloading the update. What can I do short of hooking up computer elsewhere?

Do you ever visit a friend or realtive with a Mac who has faster internet? Maybe the local library has Macs on a fast line. If so, get a USB thumb drive and put this link on it from your computer:
http://support.apple.com/kb/DL1399
Then put this link on the drive:
http://support.apple.com/kb/DL1429
When you are at some place that has a Mac with a decent download speed. insert the thumb drive in that Mac and click on the first link ("DL1399") and direct the download to your thumb drive. Now do the same this with the second link.
The installer files will now be on the thumb drive and, when you get home, drag them from the thumb drive to your desktop. Install the Combo update first.

Where to update the ACH Company ID for the bank?

Electronic file that Payment Process creates has a ACH company Id that is invalid. We have to change this ID in the system so that the valid company id is reflected in the file.
Where to update the ACH Company ID for the bank?

Hi,
Normally, the Company ID should be that of the Tax Reporting ID - (M) Setup:Tax:Reporting Entities.
If using NACHA, the initial digit code can either be 1, 3 or 9 (depends i.e. for IRS EIN="1") + the first 9 digit of tax id.
(Depending on your setup) Tax ID can also be checked in the Alternate Account Holder field of the Bank Accounts window (Disbursement bank account).
regards,
Rownald

My wife and I got Iphone 4S same day 2 years ago. I used the same Apple ID for both. We do not use iCloud, but today after I updated my phone to IOS7 I keep getting her texts on my phone ans vice versa.

My wife and I got Iphone 4S same day 2 years ago. I used the same Apple ID for both. We do not use iCloud, but today after I updated my phone to IOS7 I keep getting her texts on my phone ans vice versa. I turned off imessage in message settings. Seems to have stopped now? Never did this before IOS7. Will I have more troubble when her phone updates to IOS7? Is icloud going to be forced on me then?

This is being caused by using the same Apple ID for iMessage on both phones. To separate your messages, go to Settings>Messages>Send & Receive and do one of the following:
Either uncheck the email address shown under "You can be reached by iMessage at" on both phones; or
If you want to continue to receive iMessages at this email address, on one of the two phones, tap the Apple ID at the top, sign out, then sign back in using a different Apple ID.

When I receive appointments by email and accept them they go into the enourage "on my mac" ical calendar which is not synced with mobileme. How do I change where appointments are put ?

When I receive appointments by email and accept them they go into the enourage "on my mac" ical calendar which is not synced with mobileme. How do I change where appointments are put ?
Or how can I choose where the appointment is put ?
I use the mobileme sync services so the ical calendars that are synced are those in the "[email protected]" group.
Please help !
Nick

Actually you can't drag the appointment to ano calendar - its says "You can’t make changes to this invitation., Only the organiser can change this event"
Also if you double click on the received appointment and open the window the only calendars shown that you can select are the 'on my mac" ones, and not the sync'd ones.
Any ideas welcome !!
Nick

I have a very old (by computer standards) MacBook Pro, and a newer one. I've been using the old one mostly for iTunes, into which I have only CD entries. For a long time, years, the old MacBook pro ceased entering the song titles. This is very time con

I have a very old (by computer standards) MacBook Pro, and a newer one. I've been using the old one mostly for iTunes, into which I have only CD entries. For a long time, years, the old MacBook pro ceased entering the song titles. This is very time consuming for me, so I finally investigated a bit further.
I discovered how to enter the track titles onto my newer MacBook Pro, and was so pleased! But when I tried to do the same with the other laptop, it failed.
What I did, basically, was what the Apple Help suggested--choose iTunes General Preferences, etc.etc. And yes, I did upgrade the old laptop to the newest iTunes version.
Am I just wasting my time here? Is there some reason why an older Mac Pro will not do what the newer one will, with regard to iTunes?
My older laptop is a 2.6 GHz Core Duo; it has 36 GB of "memory available." The newer one a 2.3 GHz Intel Core i7. It has 284 GB of memory available.
Both are using the same version of Snow Leopard--10.6.8.

I have a very old (by computer standards) MacBook Pro, and a newer one. I've been using the old one mostly for iTunes, into which I have only CD entries. For a long time, years, the old MacBook pro ceased entering the song titles. This is very time consuming for me, so I finally investigated a bit further.
I discovered how to enter the track titles onto my newer MacBook Pro, and was so pleased! But when I tried to do the same with the other laptop, it failed.
What I did, basically, was what the Apple Help suggested--choose iTunes General Preferences, etc.etc. And yes, I did upgrade the old laptop to the newest iTunes version.
Am I just wasting my time here? Is there some reason why an older Mac Pro will not do what the newer one will, with regard to iTunes?
My older laptop is a 2.6 GHz Core Duo; it has 36 GB of "memory available." The newer one a 2.3 GHz Intel Core i7. It has 284 GB of memory available.
Both are using the same version of Snow Leopard--10.6.8.

I purchased Photoshop Elements 13 for my Mac which does not have a cd drive. I have already installed Elements 6 many years ago. Can I still install my upgrade without using the cd's?

I purchased Photoshop Elements 13 for my Mac which does not have a cd drive. I have already installed Elements 6 many years ago. Can I still install the upgrade without using the cd?

PSE 10, 11, 12,13 - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html
You can also download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

After clearing cash on mac applications won't lunch any more..I tried to delete apps like VLC player with app cleaner and again download and instal new but it's the same..goes for all apps that are not originally part of Yosemite. Please advise me?!

After clearing cash on my mac ( Go to folder: ~/Library/Caches and clear all, than to Library/Cashes and clear all again) applications won't lunch any more..I tried to delete apps like VLC player, firefox.. with app cleaner and again download and install the new one but it's the same..goes for all apps that are not originally part of Yosemite. I have done this cash clean up very often on Maverick without any problems. This time I done it again because I could not open my web site, the server has blocked me and I was trying everything including deleting cash from mac. Please advise me what to do..?!? Thanks in advance.

It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
http://www.adwaremedic.com/kb/baddns.php
http://www.adwaremedic.com/kb/hackedrouter.php
If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

I just got InDesign CS6 and am running it on an iMac and I know the license is good for two computers which will come in very handy for me. How do I set it up to access it from my second iMac?

I just got InDesign CS6 and am running it on an iMac and I know the license is good for two computers which will come in very handy for me. How do I set it up to access it from my second iMac?

I just had an afterthought, Peter, if I could bother you further; if the downstairs iMac that I want to access it from is in my wife's name and not mine (even though I'll be the one using it on her computer) does that affect anything or can I simply load the software straight into her computer without any complications?

Where we maintain the CST & VAT numbers for a plant which is not a register

Similar Messages

Maybe you are looking for