Whether its possible for calculating Grand total the Top 20 records?how?plz

Hi Experts,
could you please let me know that whether the Grand total can be calculated by selecting the Top 20 records from the table.
please....its urgent......

I agree with Christian, we need additional clarification.
If you are looking for a report which shows only the Top 20 records and a Grand Total, here are the steps you follow:
1. From the Criteria tab in Answers, create a filter on the column you wish to show only the top 20 records.
2. Set Operator to - "Is in top"
3. Set Value to - "20"
From there - go to the results tab. Locate the data column you would like to "count" and select the "total by" button. (Looks like an E)
Hope this helps. If you are looking for something else, please provide us with a more detailed explanation.
Thanks.

Similar Messages

  • I have a mac pro 1,1. I would like to know if its possible for me to upgrade the parts to where i can install osx mountain lion, or osx mavericks?

    I have a mac pro 1,1. I would like to know if its possible for me to upgrade the parts to where i can install osx mountain lion, or osx mavericks? I am currently adding more ram so it will have 32gb of ram, i have 2 250gb HDD but adding a 250gb SSD , and have a ATI Radeon HD 4870 512mb that i will most likely upgrade to an ATi Radeon HD 5570 1gb.

    The SSD will boot fast, but the real change is launching 10 programs in 10 seconds and being able to use them. (20 seconds for a few big suites).
    I would not add or upgrade to 32GB RAM. You can get 8 x 2GB for $100 on Amazon.
    Those 250GB HDD are "old" and slow and overdue to be replaced, reformat and use t o backup the system.
    Samsung 250GB SSD is down to $150 or so on Amazon also.
    The 5770 is gone, hard to find, EOL and over charged for when you do find one.
    you could look into how to use a PC 6870 or others.
    Or, you could hold out and wait for a refresh of Mac-Mini which can be just as fast or faster and run Mavericks.

  • When Requested for a Grand Total the column values changes to zeroes

    Hi,
    I have a report with 2 dimensions and 4 facts. The report is showing the correct data when compared with EBS, but when we are applying grand total in Table View then for fact values are displaying zeroes. However the grand total is correct but for some dimensions the measures are displaying zeroes.
    At this point i have modified the Aggregation rule of 1 measure from Default to SUM and when i clicked results Wonder, i can see grand total and the zeroes were replaced with actual values. When i have compared logical queries before applying the aggregation and after, the measure is surrounded with function REPORT_AGGREGATE and REPORT_SUM respectively.
    Can anyone explain me why is this behavior occurred, i got the solution but i am not in stage to explain to client why it happened.
    Kindly help and i will make sure it is definitely marked.

    Re:  Bottom Line Grand Total
    Use the Subtotal function instead of the Sum function for all totals.
    The Subtotal function ignores other Subtotal functions in the column you are summing.
    Your three "Sum" functions would look something like...
    =SUBTOTAL(9,J3:J7)    '300
    =SUBTOTAL(9,J8:J14)  '900
    =SUBTOTAL(9,J3:J14)  '1200
    '--- Info
    1    AVERAGE
    2    COUNT
    3    COUNTA
    4    MAX
    5    MIN
    6    PRODUCT
    7    STDEV
    8    STDEVP
    9    SUM
    10    VAR
    11    VARP
    Jim Cone
    Portland, Oregon USA
    free and commercial excel programs at...
    https://jumpshare.com/b/O5FC6LaBQ6U3UPXjOmX2

  • I would like to know whether its possible to start running a vi automatically without user interaction after a system has booted up and launched labview?

    I would like to know whether its possible to start running a particular vi automatically without user interaction after a system has booted up and launched labview?

    > I would like to know whether its possible to start running a vi
    > automatically without user interaction after a system has booted up
    > and launched labview?
    >
    > I would like to know whether its possible to start running a
    > particular vi automatically without user interaction after a system
    > has booted up and launched labview?
    >
    LV doesn't have any sort of Startup folder as we are a little concerned
    about the security issues this brings about. You can specify VIs on the
    command line for LV to open. And VIs can be set to run when opened.
    Combining these features, you wind up using the system's Startup folder,
    placing either a batch file or a shortcut to LV with the command line
    options added to list out the VIs, and finally, set the VI properties
    so
    that the VIs run when opened.
    Greg McKaskle

  • Question regarding adding sums in 3 tables for a grand total

    Can someone please help me with this.  I have the coding in the tables to add table 6, 7, and 8 but each time I add or delete a row the coding gets messed up.  It is adding in some places but not on each row.  I don't know the coding to use to avoid this problem everytime you add or delete a row.  I just need all tables to add up for a grand total.

    If this is the resultyou are looking for the attached will help.
    Steve
    Please post LiveCycle Designer ES questions in that forum in the future.

  • I have an iPhone 4s that is no longer active on my account. I recently upgraded it after completing a 2-year contract. Is it still possible for me to have the iPhone 4s unlocked even though it is no longer active on my account?

    I have an iPhone 4s that is no longer active on my account. I recently upgraded it after completing a 2-year contract. Is it still possible for me to have the iPhone 4s unlocked even though it is no longer active on my account?

        Great question missmar23. You can contact our Global Support department at 1-800-711-8300 to discuss the details for your device.
    KinquanaH_VZW
    Follow us on Twitter @vzwsupport

  • My MacBook Pro keeps making copies of a document that I am trying to save. I don't want to duplicate the file. I only want to save it on both my hard drive and my external hard drive. I do not want to change its name for every save, which the computer see

    My MacBook Pro keeps making copies of a document that I am trying to save. I don't want to duplicate the file. I only want to save it on both my hard drive and my external hard drive. I do not want to change its name for every save, which the computer seems insistent on doing. Help!!

    11lizzyp wrote:
    can't be saved because the file is read-only.
    I did not create the file to be read-only. I created to be able to continue to add to it as I work on it.
    More on versions here:
    http://support.apple.com/kb/ht4753
    local snapshots:
    http://support.apple.com/kb/HT4878
    Sounds like a permissions problem ie read only.
    If running repair permissions from your DiskUtility.app does not sort it,
    Someone should jump in here with erudite and concise fix.

  • If I have an airport extreme and a time capsule is it possible for seamless switching between the 2 when a signal is weak or drops Main reason is as I move from my first floor to my attic office and would like to place one (airport extreme)downstairs and

    If I have an airport extreme and a time capsule is it possible for seamless switching between the 2 when a signal is weak or drops
    Main reason is as I move from my first floor to my attic office and would like to place one (airport extreme)downstairs and time capsule upstairs to get complete coverage

    In theory, yes. If you configure the two base station into either an extended or roaming network configuration, you should be able to walk a laptop between routers and the laptop should attempt to connect/reconnect to the base station providing the stronger signal ... but, in reality, this is not always 100% true.

  • Is possible for me to use the wireless connection from my Macbook Pro

    Hi All, I just got my iPad 16GB WIFI and I would like to know if it is possible for me to use the wireless connection from my Macbook Pro. Basically I will be travelling quite a bit and my Macbook Pro has a Wireless 3G dongle. Is it possble to use this via the 'internet share' option so that the iPad can connect to the 3G wireless via the Macbook Pro?

    Yes. Just use internet sharing on your MacBook Pro.

  • I own an iPod Touch 4g. Now i'm planning to buy iPod Touch 5g. Is it possible for me to register the new one with existing Apple ID so that i can transfer the apps from my existing account to my new Ipod 5g?

    I own an iPod Touch 4g. Now i'm planning to buy iPod Touch 5g. Is it possible for me to register the new iPod with existing Apple ID so that i can transfer the apps from my existing account to my new Ipod 5g?

    There should definitely be no issue. You can register more than one Apple device with the same Apple ID and get the same apps on both devices without having to pay for the apps again.
    Alternatively, if you want all your settings to say the same, do a backup of your old iPod Touch and then whe you receive the new iPod, restore the backup on it and it'll save you the trouble from having to redownload everything.
    Cheers.

  • I have an ipod touch 4 gen.Is it possible for me to use the internet with bluetooth?

    I have an apple ipod 4 gen.Is it possible for me to use the internet using bluetooth?helpp!!!

    Yes but only to tether to an iPhone.  The iPhone must have the optional tethering data plan.

  • Is it possible for me to get the apps my daughter purchased on my account to go onto her new account

    Is is possible for me to get the apps my daughter purchased on my itunes account for her ipod touch over to her new itunes account

    All content is tied to the account that purchased/downloaded it, and you can't copy or transfer them to other accounts - she should still be able use those apps if they are on the computer's iTunes that she syncs her iPod to.

  • Is it possible for me to transfer the purchases from my old itunes account to my new one? I would like to keep all of my music, movies, tv shows etc.

    I just created a new Apple ID that is different from my old one. Is it possible for me to transfer the purchases from my old account to my new one? I would like to keep all of my music, movies, tv shows etc.

    It doesn't matter what your AppleID is - you can just change the email address associated with it at http://appleid.apple.com/ as mentioned numerous times above.
    Okay, my former Apple ID = my former email address and the latter is dead because I moved out of the geographic area.
    If you just updated the email address associated with your AppleID you wouldn't have to sign in twice.
    I guess Apple Inc is wrong because that is EXACTLY what they stated when I called yesterday afternoon.  SIGN IN TWICE when I activate Apple TV and want to watch/listen to my legitimate purchases when my iMac is OFF.
    Your only problem is the fact you didn't safely store the password to your account and subsequently forgot it.
    Wrong ... my only PROBLEM, SIR, is that my bride, my wife of over 51 years died in my arms at 4:16 AM on December 27, 2012.  As a direct result, I decided to get the **** out of the city where my Nancy and I lived for **** near 20 years.
    On the outside chance it is of interest to you, she is buried at Arlington National Cemetery, Section 66, based on my faithful military service during 1961 -> 1981 ... including Vietnam during 1967.
    http://lovesongforever.com
    Part of this PROBLEM, SIR, is that Apple Inc refuses to merge my old purchases with my new one.
    SHAME ON YOU!!!

  • Is it possible for me to transfer the contacts fro...

    Is it possible for me to transfer the contacts from my C5-00 to any of the Lumia phones? And , please let me know the number of contacts and sms, which can b stored with Lumia phones. Is it Unliminted? Please reply.
    Moderator's Note: We have changed the title into a subject-related title. This is to keep the forum organized and let other forum users easily see and respond to this post.

    The amount of contacts/messages on the phone is restricted by available storage only.
    You can go through Nokia Suite and there's an app to get data from another phone to a Lumia Windows Phone here
    Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

  • Guys i have a problem, I used to download apps from one of my friends apple id, now i created my new account, but when i was about to update my apps its asks for my friends id and password. now how could i update my old apps from my new apple id?

    Guys i have a problem, I used to download apps from one of my friends apple id, now i created my new account, but when i was about to update my apps its asks for my friends id and password. now how could i update my old apps from my new apple id?

    The_Tonmoy wrote:
    I have no communication with my that friend :/ So it means i need to delete those apps? There's no other solution to update those apps?
    No.  purchases are forever tied to the apple ID used to buy them.  Delete them and buy your own copies.

Maybe you are looking for

  • MOVED: msi s270 series unable to use external HDD casing

    This topic has been moved to Other MSI products. https://forum-en.msi.com/index.php?topic=92843.0

  • Problems Import Preflight Profile

    Hi guys, A friend of mine who works at doing Pre-press adjustments sent me a Preflight Profile .kpf file. I uploaded the file at http://dl.dropbox.com/u/641112/dani%20perfil%20imprenta.kfp The profile was made with Acrobat Professional 9 for Windows.

  • SM 7.0 EHP1 SR1 - solman_setup initial configuration - No execute authority

    I am performing the initial configuration step of SOLMAN_SETUP, when I receive the error below. Error: E 002 No execute authority Step: Get ABAP System Info This occurs when I click the "Start J2EE Configuration" button on the J2ee Configuration scre

  • Duplicate song names appearing in error

    My library keeps renaming tracks with the wrong song name. Two tracks will appear to have the same name but if you look at the track length it's actually two different tracks sharing the same name.  When you click on it one track the other is removed

  • Since I purchased iphoto '11, I cannot use edit.

    I have a "09 MacBook.  After upgrading to osx Mountain lion and adding more memory, I upgraded to  iphoto '11.  Now I cannot use edit because it tries to download the photo again rather than edit mode.  Is this common and if so how do I fix it?