Whether Shopping cart will be updated when the PO quantity is changed

Hello SRM Guru,
I have one question.
When the PO quantity is changed after the shopping cart was approved Whether this changed quantity will update the Shopping cart ?
Technical Scenario : extended classic
system: SRM 7.0 SP6
Regards
Madhan

Hello,
If PO is created from shopping cart, this means that shopping cart is fully approved.
After shopping cart is fully approved, no changes are allowed. Therefore, if PO quantity is changed, this value will not be updated in shopping cart quantity.
Regards,
Ricardo

Similar Messages

Sharepoint 2013, MS Project 2013 - Task List not updating when the project file is changed

Hi
I have created a SharePoint task list and timeline from a MS Project 2013 file on my PC. I have then created a new Project file from that task list which then places the new project file in the site asset folder and provides me with a synced copy. I now
only use the SharePoint copy of the project file in my MS Project as any change I make to the project file should be reflected in the Task list and vice-versa
However if I add some tasks into the middle of the project with MS project, the SharePoint Task list is not updated to show these additional tasks. If I open the SharePoint task list with MS Project - from the task list toolbar - the project file shows the
added tasks.....so the MS Project file in the site asset folder is correct but the tasks in the SharePoint task list is not being updated
Anyone seen this before ?
Thanks
Geoff

Hi Esben,
According to your description, the error occurred when opening the task list with the content approval enabled in Project.
Per my knowledge, when we enable the content approval for the task list, the field named Approval Status which is required will be created in the list.
However, if a project plan doesn’t contain a field that is required in SharePoint, the plan won’t sync.
The error occurs because of the required field Approval Status when the content approval is enabled in the task list, so we need to add the required field as a custom field in Project.
More information:
Sync with a SharePoint tasks list:
http://office.microsoft.com/en-in/project-help/sync-with-a-sharepoint-tasks-list-HA102828524.aspx
Best regards.
Thanks
Victoria Xia
TechNet Community Support

VBU-FKSAA field not updated when the item category is changed

Hi,
The sales order is created with the item category ZZZZ which is not relevant for billing. So the VBUP-FKSAA value is blank which means not relevant for billing.
Now in the change mode, the item catg is changed to XXXX. this is relevant for billing. But even after changing the item catg the billing status is not changed. so the sales order can not be billed.
Please let me know if anyone has come across this problem and also the soution.

Thank You Vincent. It works for finish goods that currently have cost in the sap-bo (taking std or avg) . Do you what should I do when the item is receiving the first-transation and it is an inventory entry coming from DTW ? Because when I test this conditions, the field "price" is ignored and when I check the inventory entry sent using dtw the recorded cost is "cero".
Thank a lot
Salomon Ponce

I have the iPhone 5s. I synced it with my Mac and got all the old apps from my old phone. I was not able to update any of the apps on the old phone and they will not update on the new iPhone 5s either! What can I do?

I have the iPhone 5s. I synced it with my Mac and got all the old apps from my old phone. I was not able to update any of the apps on the old phone and they will not update on the new iPhone 5s either! What can I do?

Hey there rmflint,
It sounds like you are wanting to update the Apps that were synced over from your computer to your new iPhone 5s. If you are clicking Updates in the App Store in the bottom right corner, would you mind clarifying what happens when you are trying to update them?
App Store at a glance
http://help.apple.com/iphone/7/#/iph3dfd8c19
Thank you for using Apple Support Communities.
Take care,
Sterling

Iphoto 9.5 won't import photos from iPhoto 7.5. Library will not update using the iPhoto library upgraded application.

iphoto 9.5 won't import photos from iPhoto 7.5. Library will not update using the iPhoto library upgrader application. Repeatedly says it can't locate photos even when told to cancel. I think the photos in question are in Nikon RAW format.

iPhoto 9.5 immediately tries to "upgrade" my library using the upgrader.
iPhoto 9.5 asks you to run the upgrader to prepare the library for 9.5. It then will update the library to its format.
You need to do the following:
1 - go to your Applications/Utilities folder and double click on the iPhoto Library Upgrader 1.1 application.
2 - select Choose Library, navigate to your iPhoto library, select it and let the upgrader do its thing.
3 - launch iPhoto 9.5 to open and finish the conversion of the library.
OT

Change shopping cart status to reject when older than certain period

Hi Guru's,
I'm new to this environment.
Please help me with advice and sample code for the following.
I need to check if shopping cart is open for more than 20 days then change status to reject, daily background job.
Then need to inform user of new status via email.
Which is the correct FM, s to use.
Many thanks
Daniel

Hi
Here are the steps ->
1. Create a Customer Implementation of BBP_DOC_CHANGE_BADI for Object (filter) type - BUS2121 using SE18 Transaction.
In the coding, you can set you condition ( >= 20 days then change status to reject)
2. Using either of the standard Function modules, you can create a Z program to send emails.
Use the following Standard SAP Function modules ->
SO_OBJECT_PREPARE_FOR_SEND
SO_OBJECT_SEND
SO_DOCUMENT_SEND_API1
SO_NEW_DOCUMENT_ATT_SEND_API1
SO_NEW_DOCUMENT_SEND_API1
Other related links ->
Re: Email notifications
SO_NEW_DOCUMENT_SEND_API1 is working in foreground not in background..
Hope this will help.
Regards
- Atul

Shopping Cart Approval Preview Issue in the Portal

Hi Everbody
In My SRM Portal, when the approver changes any text or any date like that in the shopping cart it should come for the accept changes to the creator inbox, and when he sees the approval preview it is showing the creators name, but my functinal guy says that the approval person should be there but not the creator person in the preview and when the creator of the sc accepts the changes it is showing that it is approved by the creator name but he says that it should be approver name not the creator name.
so can boby please suggest me in this, thanks in advance.

Hi ,
Which WFL are you using, AC or PC? It is Badi approval WFL?
What is your system version ans Support Pack?
Thanks,
Melina

My Apple TV will not update to the latest software, dose anyone know what the problem is, I've reset, tried to do it wirelessly as well as while connected via Ethernet cable.. Both have resulted in the same message!!

My Apple TV will not update to the latest software, dose anyone know what the problem is, I've reset, tried to do it wirelessly as well as while connected via Ethernet cable.. Both have resulted in the same message!! Update unsuccessful, current software version is 5.1 (5201) . I've rented a movie recently and does not appear in my movie list, but I have been charged for this movie, can someone help me out with these issues.

If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Source list, and then click Restore.
If when you choose restore you get a message that the device cannot be found, download the file below
Apple TV Software Restore 5.1.1 (2nd generation)
Apple TV Software Restore 5.1.1 (3rd generation)
Then hold down the option key while choosing restore and select the downloaded file when prompted.

AME will not update to the new release

AME will not update to the new release. Tried from the help menu in both AME and Premiere. It Fails each time I try. Is this a known issue. I was not able to update AE or Premiere from the CC app manager. I had to update those both from the update item in the help menus of each program. What is going on?

There are two steps in patching via creative cloud or from within the application.
1. download the patch
2 apply the patch
Which stage failed for you?
I did run into download issue yesterday where CC tried to download patches for a few apps at the same time and it failed to download. I suspect the servers that patches reside on were busy. When I tried it a few hours later, it worked.
You can download the manual patchers from these locations:
http://www.adobe.com/support/downloads/product.jsp?product=160&platform=Macintosh
http://www.adobe.com/support/downloads/product.jsp?product=160&platform=Windows

My friend found an iPhone 5 ; he plugged it in the computer willing to restore when the restore was succesfulhe was ready to set it up on his way to do it , icloud ask him for a password from certain email he doesnt know, is there any way you could skip ?

my friend found an iPhone 5 ; he plugged it in the computer willing to restore when the restore was succesfull he was ready to set it up on his way to do it , icloud ask him for a password from certain email he doesnt know, is there any way you could skip this step or delete the accoun without putting a password down ?

9EriickxD wrote:
my friend did but they couldnt tell whose it was. now he/she just trying to restore it. But not knowing how to get rid off it
Turn it into the police.
Your friend should not keep someone elses iphone without making every attempt to fget it to the rightful owner.

I have bought OSX Lion 1 month back, and now new OS is getting released, there will any updates for the OSX with new features or I have again buy it paying $20, Please let me know??

I have bought OSX Lion 1 month back paying $29.99, and now new OS is getting released, there will any updates for the OSX Lion with new features or I have to again buy it paying $19.99, Please let me know??

http://www.apple.com/osx/uptodate/

Is it possible to make a shopping cart that only sends me the info

I'm trying to make a shopping cart that only sends me the info for my photography site I then deliver the photo to the client in person

Hi,
Please take look to this thread, might be helpful
shopping cart without payments.

I'm having trouble with the volume of my i phone 4s when using headphones, the sound will only appear when the volume is at its highest, any lower and all I hear is static. Can anyone help me with this problem? Much appreciated.

Hi, I'm using a white iPhone 4s with 16gb memory and having some problems. Whenever I use earphones the sound will be heated when the volume is at the highest if I turn it down any lower all I hear is static. Can anyone help me with this problem as I would appreciate it much.

Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
No data is lost due to a reset.

[svn:fx-trunk] 11541: Fix the textLayout build number that is set in the main build. xml to match what will be set when the build machine does NOT do the build

Revision: 11541
Author:   [email protected]
Date:     2009-11-06 14:29:41 -0800 (Fri, 06 Nov 2009)
Log Message:
Fix the textLayout build number that is set in the main build.xml to match what will be set when the build machine does NOT do the build
QE notes: no
Doc notes: no
Bugs: no
Reviewer:
Tests run: checkintests
Is noteworthy for integration: no
Modified Paths:
    flex/sdk/trunk/frameworks/air-config.xml
    flex/sdk/trunk/frameworks/flex-config.xml

Thats good news.

WRT54g v3 firmware update when the power was interrupted.

I have a WRT54G v3 modem. firmware update when the power was interrupted. now is access the router's web-based setup page not open and power led are flashing. DMZ led 5 seconds are flashing.
Help me please!

As the power light on the router is flashing,it means the firmware of the router is corrupted...Try this link and try to re-flash the firmware once again....Once done,reset the router for 30 seconds,power cycle the router and check..

Whether Shopping cart will be updated when the PO quantity is changed

Similar Messages

Maybe you are looking for