Which are the infotype we are using for payroll
Hello , everybody
which are the infotype we are using for payroll , time managemnt
Hi,
For payroll:
0008, 0009, 0011, 0014, 0015, 0045, 0057, 0167, 0169, 0207, 0208, 0267, 0416.
For time management:
0007, 2001, 2002, 2006, 2007, 2010, 2013.
For Indian payroll:
Additional infotypes are from 0580 to 0589.
Edited by: Velangini Showry Maria Kumar Bandanadham on May 14, 2008 5:39 PM
Similar Messages
-
What are the transaction codes we use for LSMW in MM, SD, PP & FI/CO gnrly
Hi all,
What are the transaction codes we use for LSMW in MM, SD, PP & FI/CO generally?
Help will be surely rewarded.
Thanks and Regards,
Creasy> What are the transaction codes we use for LSMW in MM, SD, PP & FI/CO generally?
General threads about LSMW in MM, SD, PP, FICO will be locked and deleted generally.
> Help will be surely rewarded.
&********************** Please read "the rules" if found usefull... ************************&
Cheers,
Julius -
I have the current generation of the AirPort Extreme and a handful of devices that utilize the new 5Ghz A/C frequency. My internet speeds were blazing fast when I had first set it up but lately it has been lagging terribly. I was told that changing my dhcp did help, which it did it seems like it might be back to its normal speeds but I just want to know what are the best settings to configure for the airport so that I can get the most out of my service on all my devices? I'm using a CAT 6 cable which does help, I have a guest wifi setup with a wifi password which I understand will slow it down a little. Can anyone just point me in the right direction or just give me a step by step guide on what settings to configure? Should I really consider turning off the guest network?
I am assuming that you are looking to configure your network to provide the highest level of bandwidth possible for your network clients. If that is the case, the following are a few things to consider:
The Internet modem should support Gigabit Ethernet. That is the Ethernet connection between the modem and your 802.11ac AirPort Extreme should be Gigabit Ethernet.
Use CAT-5e or CAT-6 Ethernet cables between all wired connections.
Only expect 802.11ac performance with 802.11ac clients in the same room as the base station.
Eliminate or significantly reduce any forms of Wi-Fi interference on both the 2.4 & 5 GHz bands.
When streaming, especially HD video on your local network, use wired connections between the host and player devices when possible.
Other than the above suggestions there are no "magic" settings that you can make on your AirPort. Note: The Guest network shares the same bandwidth as the "main" network. Unless you have a network goal to provide this type of network, it is best left disabled. -
What are the tables to be used for these reports
hello everybody,
i am a new user. it is only recently that i have started learning ABAP. i was given a rask by my faculty to develop the following reports. can anyone help me find out the tables that are used for them.
1. Report for Sales Orders due for delivery.
2. Revenue Reports based on Order Types.
3. Report for list of Pending Purchase Orders, Cancel Purchase orders.Hi,
This depends on which fields you are supposed to show in output.Ask the person about layout requirement. How they want output of the report and which fields.
Normally Functional person will give table name also.
Here are few tables which can be useful in your requirement.
Sales Header table : VBAK
Sales Item table : VBAP
Delivery Header : LIKP
Delivery Item : LIPS
Purchase order header : EKKO
Purchase order item : EKPO
Better to concern this with u r requester and u ll get definite answer.
*MARK if this helps -
[SOLVED] What are the sectors 2-33 used for?
In regard to BIOS Boot Patition for GRUB, GPT says:
Afterwards, create a new partition with gdisk and manually specify its position to be sectors 34 - 2047, and set the EF02 partition type.
Given that sector 1 is allotted for MBR, what are the remaining sectors 2-33 allotted for?
Last edited by DiamondbacK (2013-08-03 21:10:27)DiamondbacK wrote:I'm still confused that don't sector numbers start from 1 according to Wikipedia entry on LBA?
No; from the article you've referenced:
Wikipedia wrote:blocks are located by an integer index, with the first block being LBA 0
In this context, "block," "sector," and "LBA" are more-or-less synonymous. (There is a reference on that page to sectors in the CHS scheme ranging from 1-255, but that's in the CHS system, which is not used in GPT and is pretty much history even for MBR.)
If that's the fact, sectors 2 instead of sector 1 is allocated for Primary GPT Header, and sector 3-34 have to be allocated for Primary GPT Table which need 32 sectors. Then sector 34 can't be the beginning sector for BIOS Boot Partition.
This is all based on a false premise -- or at best, a non-standard numbering system.
Does that imply the sectors 34-2047 I quoted from Arch Wiki actually means LBAs 34-2047, which is equivalent to sectors 35-2048?
Again, false premise. Whether you call them blocks, sectors, or LBAs, these units are most commonly numbered starting from 0. Certainly that's true in both GPT fdisk (gdisk, cgdisk, and sgdisk) and parted, which are the two major classes of programs you're most likely to use for partitioning in Linux. -
What are the magsafe 2 adapaters used for
My mac book pro has mag safe 1. What is the mag safe 2 adapter used for? Macbook air maybe? Thank you
From the U.S. Apple Store --- here are some of the things that use it:
-
What are the proper settings to use for Quadro 2100M on WS60 workstation
Hello,
I have a WS60 Workstation. When going through the settings for physix and others I noticed that the Nvidia card has no ports assigned to it.
How do I ensure that the laptop is indeed using the quadro card?
ThanksFor the Optimus structure, NVIDIA graphics is doing the rendering but it's Intel Graphics which is showing the rendered graphics on the screen. This is why you didn't see NVIDIA Graphics is connecting with any displays.
You can check the power button light, it will light orange when the dedicated graphics is in used.
(White color shows it's using the integrated graphics) -
My Photo website host (SmugMug) converts uploaded video files at a specific Data Rate in Mbps before installing them. I would like to compress my slideshow video file to the same rate before I upload it to reduce file size and upload time. When I choose the "Custom" setting for an Export, I can choose 1 of the 5 Quality choices and see the estimated file size. But, I cannot know what the actual Data Rate is until after I wait a long time to export the slideshow (hours for a long slideshow) and then examine the resulting file in QuickTime Player's Inspector.
I ran a few tests using a short slideshow (16 images, 1:23 mins/secs) at 1,728 x 1,080 resolution to find out the bit rates for various quality level choices.
Export setting Quality Resulting bit rate File Size
HD 1080p default 20.68 Mbps 214.8 MBytes
Custom Best 20.49 212.8
Custom High 6.25 65.0
Custom Medium 3.97 41.3
However, I don't know if those bit rates will be the same for different length slideshows or for different output resolutions. My SmugMug host site uses an 8.0 Mbps rate for a 1728 x 1080 video file. If I choose Custom/Best, my file will be almost 3 times bigger and much higher quality than necessary, but if I choose Custom/High, my file will be smaller and lower quality than SmugMug's converted version.
I have installed MPEG StreamClip that will let me convert an exported Aperture slideshow video file, and StreamClip allows me to choose a specific bit rate in Mbps. But, I would prefer not having to do a 2 step process (Export from Aperture, then convert in StreamClip). -
can anyone help me
Hi,
It is depends on your requirement. compulsory info types are 1000 1001 1002 1003 1008 1018....
go to pp02 and click on F4 option in IT field and Subtype field.
Example:
1000
Object
1001
Relationships
1002
Description
1003
Department/Staff
1004
Character
1005
Planned Compensation
1006
Restrictions
1007
Vacancy
1008
Acct. Assignment Features
1009
Health Examinations
1010
Authorities/Resources
1011
Work Schedule
1013
Employee Group/Subgroup
1014
Obsolete
1015
Cost Planning
1016
Standard Profiles
1017
PD Profiles
1018
Cost Distribution -
I have 4 and 8 - but which is the BEST version to use for a big project?
I have a G4 Powerbook with iMovie 4.0 but have never been able to do a movie longer than about 35 minutes (the last step - burning it?). I also have access to a new Intel iMac that has iMovie 8.0 but I have heard this is a 'dumb' version. I have an important video project coming up - probably 60 minutes when all is said and done. Can I install 5.0 or 6.0 on the new iMac? Or should I get new software (Final Cut Express?). I don't know that I trust the Powerbook to pull this off but I do know the program. Any help advice, most welcome. Thank you! Lee
You can download iMovie 6 here (requires iLife '08)
http://www.apple.com/support/downloads/imovieHD6.html
iMovie 4 is capable of handling long projects. If you run out of hard drive space, that is a limitation. DV is 13GB per hour.
Or does your iMovie projects consist of an incredible amount of very short clips? iMovie 4 handles up to 999 clips or 999 still.
Why do you still run iMovie 4.0, when there is a free update to 4.0.1? (Or it was just a typo?) -
hi i have an iphone 4 which is from canada nd i have seen one sim inside it which is a canadian sim ,iam staying in india so can i use that phone in india and please tell me what are the steps ihave to take for using that canadian phone in india
Only the carrier to whom the device is locked can authorize it's unlocking. Contact the carrier to see if they offer unlocking and if you qualify.
-
Which are the highly recommended JMS brokers for live deployment?
Which are most widely deployed JMS messaging servers (brokers) in live applications?
Which are the most recommended JMS servers for a new deployment?
Any tips on these will be very helpful.function(){return A.apply(null,[this].concat($A(arguments)))}
I have my dev server - I leave this on 512MB and that's fine for
most of the stuff I do. We generally up this to a gig on our live
servers (which only run 3-4 small sites), and historically we've not
gone above this on our Shared servers (which host anywhere up to 400
sites) because of the 32-bit limit.
However, now we're running CF9 on 64-bit Server 2008, we've obviously got a lot more RAM available. The obvious choice is to ramp it up high, but I've also been heard that causes issues of its own - the Java GC then has far more work to do when it's called and as the memory fills it's harder to get a contiguous block of RAM, so performance can suffer.
Leave the memory setting at the default value, until testing requires you to do otherwise, or your sites unravel some unforeseen memory demand. It's a risk our SysAdmin colleagues are prepared to take. With the coming of 64-bit, they've been on the alert, and have always cattle-prodded us whenever we've been tempted to push the button to go higher.
Our defaults almost coincide with yours: 512 MB for 32-bit and just over 1GB for 64-bit. So what you yourself have just said is my own basic wisdom on the subject, too: if it aint broke, don't try to fix it.
[postscript: I work full-time at one company, part-time at another. By pure coincidence, both use the same JVM memory settings.] -
why are my movies not showing on my Mac Book, which is the computer that I used to purchase the movie, but showing on my IMAC at home...I am currently deployed so this ***** a bit. Also how do I keep this incedent from happending in the future?
No, this is not the case. I know where i purchased the movie and I also know movies cant be added to the cloud such as music, TV shows can. The instance happened during the dowload. I think that depending which computer is up and running and the bandwith allocated on either network, which ever computer that finishes first is the one that gets the movie. Just a thought. So next time I will ensure my IMAC is not running. I think that fixes it.
Thanks -
Which are the supported phone number formats for IPhone?
Can anybody tell me which are the supported phone number formats for IPhone? or any link which will help me as I want to know exactly which phone numner formats are supported by iPhones? Thanks in advance
Thanks for your quick reply. But I want to know like the below mentioned phone number formats, which other formats are supported by iPhone,
1. +36 1 889 6600
2. +421 33/591 79 11
3. +39 035 322048
4. +65 6336 3456
5. +61 7 3027 8400
6. +86 516-83265979
Can you give some idea regarding this? thanks in advance. -
I upgraded my iPod Touch 4th Gen yesterday. Now it won't play music, which is the main thing I use it for. Over 11,000 songs [it's a 64GB model] -- will I actually have to restore the device and re-add all that music?
[Music files are still there, and I can play them on my computer directly from the iPod [just one track at a time] but not in the usual way, through headphones.]
On the Summary page of iTunes for the iPod, it shows 50-plus gigabytes of "Other" content and no music, which was not previously the case. I assume this is related to the problem.
I can bring up individual tracks on the iPod and see cover art, but cannot play the music.iCloud is free, iTunes match is $25 a year.
I had the same problem and when I went to Settings I had 0 songs, even though they were obviously still there since I only had 15GB free on my 64GB device.
I decided to do a complete reset/restore of my 4th gen iPod Touch, Bad move! I've been messing with it for hours, and it simply won't restore--it keeps hanging on a black screen with an Apple logo and a progress bar at about 10%, sometimes it goes completely blank and tries again, with the same result. (I've posted my question/plea for help here: https://discussions.apple.com/message/19735862 )
I'm ready to bang my head against the wall! I can put the device in recovery mode, connect to iTunes on my computer, and get it back to the setup screen, but when I go through the process again and try to do an iCloud backup I get the same reset/restore loop.
I could start from scratch, but I really, really, really don't want to go through all of my hundreds of apps, reinstall them one by one, etc. etc. etc.
I thought that once I started using iCloud, I didn't need to sync with iTunes anymore--guess I was wrong.
Maybe you are looking for
-
Restricting issue of goods to cost center with respect to material type
Dear Users, I have a requirement like we want to restrict issue of goods to cost center with respect to material type i.e., we want to issue goods to cost center only through reservation and that too only for specific material types. Is there any sta
-
Acrobat 8 Pro - How do I flip pages and sound files?
I have made a PDF from a PowerPoint file and as expected the actions were lost from the PPT. I would like to make the PDF to start when opened and change to the next page every 10 sec. I have tried Advanced/Doc Processing/Page Transitions - set flip
-
Drag and drop doesn't work in Optimise Toolbars
when I try to add an icon to the taskbar, nothing happens. The moved icon is shown as being in an unusable place (black circle with diagonal bar). Also I cannot unlock the elements in the toolbars to rearrange them...
-
Display Blob content in HTML Region
Hello, I'm trying to display the contents of an .htm file in an html region. I can get it to display as a link but I can't get it to display as an image. I have a page item that is display as text (do not save state). For the source value I use a PL/
-
Is anyone else facing a similar problem? How can i fix it? Thanks