Which BW components must be upgraded at the same time as our BI 7?

Hello,
We have scheduled to upgrade our Javastack and BI 7 server to a more recent version (with the support pack preceding the last available one)
Could someone tell me which component must be upgraded at the same time  of our javastack and SAP BW system ?
Hereunder our current situation of BW Support package&javastack level:
SAP_BASIS (SAP Basis Component)                700 0014
SAP_ABA (Cross-Application Component)           700 0014
ST-PI (SAP Solution Tools Plug In)                2005_1_700 0006
PI_BASIS (PI_BASIS 2005_1_700)                2005_1_700 0014
SAP_BW (SAP Netweaver BI 7.0)               700 0016
FINBASIS (FINBASIS 600 : Add-On Supplement)          600 0011
SEM-BW (SEM-BW 600: Add-On Supplement)          600 0011     
ST-A/PI (Servicetools for the other App/Netweaver 04)     01J_BC0700 0000     
BI_CONT (Business     Intelligence Content)          703 0008
Javastack                         7.0 SP 14
Thanks in advance
Dominique

if your SAP_BW support package level is 16. then java level also should be level 16.
As you mentioned, you java stack level would be 14. so upgrade the level to level 16.
Before upgrading please take up this point in mind. Now the latest level of SAP_BW is level 19
so upgrade the BW system SAP_BW support package level to 19 and others SAP_BASIS and SAP_ABA would be 17.
then upgrade the java stack level to 19.
Hope this would help you.

Similar Messages

  • My Ipad mini does not see my printer. my wife's ipad2 does. We both use IOS8 and upgraded at the same time. How can I remedy this?

    My Ipad mini does not see my printer. my wife's ipad2 does. We both use IOS8 and upgraded at the same time. How can I remedy this?

    OK great info!
    I found 2 possible ethernet to USB adapters:
    By "Plugable":  USB 2.0 to ethernet LAN wired network adapter - seems this will work, but I'll contact Plugable.
    2. Apple USB Ethernet Adapter
    Easily connect your MacBook Air computer to an Ethernet network with the Apple USB Ethernet Adapter. Small and light, it connects to the USB 2.0 port of your MacBook Air and provides an RJ-45 connector that supports 10/100BASE-T performance.  BUT NOT SURE IF THIS WILL WORK ON ANYTHING BUT a MacBook Air…
    One person commented: 
    This little gem used to be the device of choice for adding a second Ethernet interface to a Mac Mini Server and I'd been using one that way for about a year. After doing a software update to 10.6.6 it stopped working. Forewarned is forearmed – it appears that Apple is finally enforcing the MacBook Air system requirement.
    Thanks for any additional comments.
    Best regards,
    Steve Schulte
    Sunday 6 January 2013

  • With my  Os X 10.7.5 , I updated outlook for mac, it took a while, kept wanting me to close microsoft database Daemon,finally managed to upgrade to outlook 14.3.2, after new start is EVERTYTHING in outlook Gone. At the same time updated our laptop, with n

    with my  Os X 10.7.5 , I updated outlook for mac, it took a while, kept wanting me to close microsoft database Daemon,finally managed to upgrade to outlook 14.3.2, after new start is EVERTYTHING in outlook Gone. At the same time updated our laptop, with n

    This forum is for troubleshooting Apple Software Update for Windows, a software package for Windows designed to update Apple products that run on Windows, and not related to Microsoft Office in any way. I suggest you post Office related questions on Microsoft's own forums for their Mac products.
    http://www.officeformac.com/productforums

  • How much does it cost to replace an iPhone 5 from water damage? and can yiu upgrade at the same time?

    I dropped my phone in the toilet, put it in rice for a week and it's still not working. I want to know a rough price of what it is to REPLACE my iPhone and possibly upgrade at the same time.

    US $269, at any Apple store. And no, you can't "upgrade". You'll get exactly what you now have.

  • BE6K migration and upgrade at the same time

    let's say a customer has 300 users on Unity 5 and CUCM 7 without UCSS. I want to get them to 300 CUWL STD in CUCM 10. I know I can order BE6K without upgrade without UCSS (BE6K-ENH-UPG + BE6K-VM-UPG), but that only gets me to ENH + CUC licensing. I know I also can use feature migration for UCL ENH+apps to CUWL STD with BE6K-UWL-CMAPPS2BE for the same 300 users. I can't order upgrade and migration together, so I'd need to order them under two separate R-CBE6K-K9. The problem is that both will require ESW+UCSS, but I only need one set of ESW+UCSS. What would you recommend I do in this situation?

    A device can be connected to only one network at a time.
    I will tell you what works for me.
    Connect your TC to your modem. All you need to do is set up a dedicated n network on 5ghz freq (i used wpa2 wireless security) with with your TC and use that with all of your other n capable stuff like ATV, macbook air etc. Then connect your old AEBS using an ethernet cable to the ethernet AEBS connection to the TC ethernet. Then using Airport Utility find your AEBS, and set up a b/g network 2.4ghz freq (i used wep 128bit). While setting up the AEBS, click on the internet tab on the top and then go the bottom, where you will see connection sharing and select off (bridge mode). This will allow your AEBS to use the TC as a bridge to your cable modem. Now you have two wireless networks using one modem using essentially 2 base stations, TC and AEBS. My old AXs, old b/g imacs and iphone join the b/g network, and I can stream music from my n capable computer and old b/g imacs to my ATV and AX hooked to different stereos around my home. And log in to different music libraries and control the music from my iphone. My computer are all networked wirelessly. The higher encryption you use on the b/g network the slower it will be. Do not combine b/g/n network as it will be slow, and more so using any wireless security. Keep in mind you can also use an old AX instead of and old AEBS for the b/g network as well in bridge mode. Give different names for each network. Any neighbor on the same frequency using the same channel will interfere and slow your network done. There are cool widgets you can download that tell you what channels your neighbors are using and can select a different channel from them. It's complicated and takes patience, good luck.

  • I have updated my iphone 4s to ios 6.1.3 and the batter drains completely in a few hours. The same is hapenning to my my daughters phone which I upgraded at the same time. Very disappointing Apple. This is a serious issue and there is no help.

    I have updated my iphone 4s as well as my daughters iphone 4 to ios 6.1.3. After the upgrade, both of our batteries drain very fast and in a few hours. Last nite, I slept with the phone at 90% charge at around 11:00 PM and this morning by 6 AM it is compltely drained.
    I tried various things including a restore but doesnt look like it works.
    This is very frustrating and waste of time and feel trapped as I cannot go back to my old iOS version which was working fine. And it is a shame on Apple to do this to customers like me who have so many Apple Devices at home. For an 800 dollar device, if I have to go through this kind of problems, this would be the last one I purchased.

    Thank you wjsten for your soon reply. Unfortunately on these days I'm in a country that Apple don't have any retail store here and for sake of time I prefer to fix it myself to DHL it to the nearest country to use its warranty. Do you have any idea how can I fix it? Do you think it's a software issue?

  • EHP7 Upgrade and BW Upgrade at the same time - possible?

    Hello everyone,
    we are currently planning to upgrade our ERP system from EHP 5 to 7 and BW from NetWeaver 7.3 EHP 1 to 7.4. NetWeaver and Kernel will also obtain an upgrade.
    Is it possible to do the ERP and BW upgrades in one business downtime or are there any best practices which are recommended?
    Regards,
    Tobias Prein

    Hi Tobias,
    Is it possible to do the ERP and BW upgrades in one business downtime
    Technically it is possible. You can have 2 different set of basis team working on each of these upgrades.
    AS per best practise
    Upgrade has to be done first on a copy of Production system ( to identify potential issues which may appear on Production). This will be followed by dev, QAS and finally production.
    Regards,
    Deepak Kori

  • Which components must be upgraded to get SP13 for ECC 6.0?

    Hello,
    Which software components must be upgraded in order to get the SP 13 for SAP ECC 6.0 system?
    Currently we have only SAP_ABA and SAP_BASIS level 13.
    Thanks,
    Ugis

    Hi Ugis
    Certainly  - here is the contents of ERP 6.0 stack 13 for ERP Central Component (ECC)
    EA-APPL 600 SAPKGPAD13  
    EA-DFPS 600 SAPKGPDD13  
    EA-FINSERV 600 SAPKGPFD13  
    EA-GLTRADE 600 SAPKGPGD13  
    EA-HR 600 SAPKGPHD29  
    EA-IPPE 400 SAPKGPID13  
    EA-PS 600 SAPKGPPD13  
    EA-RETAIL 600 SAPKGPRD13  
    ECC-DIMP 600 SAPK-60013INECCDIMP  
    ERECRUIT 600 SAPK-60013INERECRUIT  
    FI-CA 600 SAPK-60013INFICA  
    FI-CAX 600 SAPK-60013INFICAX  
    FINBASIS 600 SAPK-60013INFINBASIS  
    INSURANCE 600 SAPK-60013ININSURANC  
    IS-CWM 600 SAPK-60013INISCWM  
    IS-H 600 SAPK-60014INISH  
    IS-M 600 SAPK-60013INISM  
    IS-OIL 600 SAPK-60013INISOIL  
    IS-PS-CA 600 SAPK-60013INISPSCA  
    IS-UT 600 SAPK-60013INISUT  
    LSOFE 600 (FRONT END) SAPK-60013INLSOFE  
    PI_BASIS 2005_1_700 SAPKIPYJ7F  
    PI_BASIS 2006_1_700 SAPKIPYM05  
    SAP ABA 7.00 SAPKA70015  
    SAP AP 7.00 SAPKNA7012  
    SAP APPL 6.00 SAPKH60013  
    SAP BASIS 7.00 SAPKB70015  
    SAP BW 7.00 SAPKW70017  
    SAP HR 6.00 SAPKE60029  
    SAP IGS 7.00  SP011 SP005
    SAP KERNEL 7.00 32-BIT SP146  
    SAP KERNEL 7.00 32-BIT UNICODE SP146  
    SAP KERNEL 7.00 64-BIT SP146  
    SAP KERNEL 7.00 64-BIT UNICODE SP146  
    SEM-BW 600 SAPKGS6013  
    ST-PI 2005_1_700 SAPKITLQI6
    Best wishes
    Stuart

  • Is there any version of Indesign that allows to open multiple instance at the same time

    I am using Indesign CS3 to generate the bulk reports automatically(programmatically) using Adobe indesign library . One of the key limitation to this tool is it allows to open only one instance at a time unlike word where multiple instances can be opened at the same time. Is there any adobe indesign too version desktop/server which allows to open multiple instances at the same time. Any help on is appreciated. Thanks.

    @PeterG
    You said "You might want to examine the End User Licensing Agreement (EULA) for  any prohibition against using these two instances at the same time with  the same license; the license does permit two installs for the same user  that are not used simultaneously." I thought that meant you had read the EULA. It's pretty unambiguous on that point.
    For everyone's edification about multiple installations and server use with a standard license here's the relevant text:
    2. Software License.
    If you obtained the Software and any required serial number(s) from Adobe or one of its authorized
    licensees and as long as you comply with the terms of this agreement, Adobe grants you a non-exclusive
    license to install and use the Software in a manner consistent with its design and Documentation and as
    further set forth below. See Section 16 for specific provisions related to the use of certain products and
    components, for example font software, Acrobat, After Effects, Adobe Presenter, Contribute, Adobe
    Device Central, Flash Player, Flash Builder, and Adobe Runtimes.
    2.1 Limited Use. The Software, or portions of the Software, may allow installation and use without a serial
    number. If so, you may install but not use such non-serialized Software on any number of Computers as
    part of an organizational deployment plan. Further, you may install and use such non-serialized Software
    on any number of Computers for demonstration, evaluation and training purposes only and only if any
    Output Files or other materials produced through such use are used only for internal, non-commercial and
    non-production purposes. You may not use such non-serialized Software after any applicable time-out
    period has ended, unless you input a valid serial number under Section 2.2. ACCESS TO AND USE OF
    ANY OUTPUT FILES CREATED WITH SUCH NON-SERIALIZED SOFTWARE IS ENTIRELY AT
    YOUR OWN RISK.
    2.2 General Use. You may install and use one copy of the Software only on the Permitted Number of your
    compatible Computers into which you enter a valid serial number.
    2.3 Distribution from Server. You may copy an image of the Software onto Computer file server(s) within
    your Internal Network for the purpose of downloading and installing the Software onto Computers within
    the same Internal Network for use as permitted by Section 2.1 and 2.2.
    2.4 Server Use. You may install the Software on Computer file server(s) within your Internal Network only
    for use of the Software initiated by an individual from a Computer within the same Internal Network only
    as permitted by Section 2.2. The total number of users (not the concurrent number of users) able to use the
    Software on such Computer file server(s) may not exceed the Permitted Number.
    By way of example, the foregoing does not permit you to install or access (either directly or through
    commands, data or instructions) the Software: (a) from or to a Computer not part of your Internal Network,
    (b) for enabling Web hosted workgroups or services available to the public, (c) by any individual or entity
    to use, download, copy or otherwise benefit from the functionality of the Software unless licensed to do so
    by Adobe, (d) as a component of a system, workflow or service accessible by more than the Permitted
    Number of users, or (e) for operations not initiated by an individual user (e.g., automated server
    processing).
    2.5 Portable or Home Computer Use. Subject to the important restrictions set forth in Section 2.6, the
    primary user of the Computer on which the Software is installed under Section 2.2 (“Primary User”) may
    install a second copy of the Software for his or her exclusive use on either a portable Computer or a
    Computer located at his or her home, provided that the Software on the portable or home Computer is not
    used at the same time as the Software on the primary Computer.
    2.6 Restrictions on Secondary Use by Volume Licensees. If the Software was obtained under an Adobe
    volume license program (currently known as Adobe Open Options) by any licensee other than an
    educational volume licensee, the second copy of the Software made under Section 2.5 must be used solely
    for the benefit and business of that volume licensee. For more information about secondary use by volume
    licensees, please visit our Web Site at http://www.adobe.com/go/open_options.
    There is also language stating that if you have a dual boot or other system capable of running more than one OS you will need a separate license for each platform if you want to run the software on more than one.

  • Can ADF keep multiple pages open at the same time?

    My company is currently developing an application to upgrade a client's FORMS system to one based on ADF. One of our client's biggest complaints with the new technology is that he can't work on many tasks at the same time, because our application can't work with "tabs" or "different windows", like Forms can with the "open form ()" function.
    Currently, we use a page called "main.jspx" with the main menu and a region under it, where we load all the "jsff" pages, which do all the different tasks in their systems (like autorizeBuyOrder.jsff, createNewOrder.jsff, etc...).
    Right now, I can only have one "jsff" page loaded on the region at once, and I wanted to make my application able to load and keep track of as many as the user wants. I was thinking on something like a tabs system, or multiple windows system. Does ADF provide any elegant way to do this? Any material you can recommend me?
    Much appreciated,
    Daniel

    Daniel Kaiser wrote:
    Hm, yes, this looks like it could be a possible solution for my problem. I'm gonna try to apply this to my app and get back to you. Thanks for the helpful answer!If you will have any questions on the application of the UI Shell template, then it is better to ask they here
    ADF UI Patterns & Best Practices

  • Need to dial 5 extensions at the same time in case of emergency

    Hi, our company uses Communications Manager 8.6.2 and has a requirement which I haven't been able to fill using normal methods.
    We need to call 5 mobile numbers at the same time when an emergency exists at our location.  Only one of the 5 called numbers has to respond to the call for help in our 3 km long, 2 kilometer wide company site.
    Thought 1 line number with remote destinations would work but this doesn't seem to handle multiple mobile numbers well. Strangely, it doesn't ring all lines at the same time. It will ring max 2 mobile phones at the same time in our test. There were enough free lines on the PMX to dial out to all phones during the test period.
    Doesn anyone have this situation and how did you handle it?
    Thanks,
    Randy

    Hi,  Thanks for the quick responce,  unfortunately we dont have contact center installed. Actually we would like one DN number for these 5 people, because these people are continually moving around their respective areas, there is no physical local endpoint.
    When the number is dialed it should ring out to the 5 mobile numbers, when one answers the others should stop ringing.
    We could in theory install the uccx solution but this will cost some time to get up and running and at present we do not have any additional need for uccx.
    Randy

  • Can't play MIDI the same time as any other sound.

    Hello there.
    I am a bass player and therefore I use GTick from [extra] as a metronome and TuxGuitar from [community] as GuitarPro tablature reader. I have a problem with (at least) this two programs: when I try to start the metronome or to play a tablature, I get error messages if any sound is playing, no matter if it is Amarok playing music, or TuxGuitar playing a tablature.
    For non-musicians, a GuitarPro tablature is a transcription of a song which can be played through MIDI at the same time as you can see the partiture, or the notes played on an image of a guitar neck or a keyboard.
    This happens every time I want to play some MIDI from this two apps: if I have a tablature open with TuxGuitar I can't play another tablature on another instance of TuxGuitar, or even start GTick to play alone with the metronome. I have to close TuxGuitar and start GTick, or open the other tablature in the same instance of TuxGuitar, which is annoying when, for example, trying to compare two tablatures of the same song.
    This makes me think that my system can't play any MIDI when some other sound is playing, but I don't know any other MIDI apps to try. Any ideas on how to setup multiple MIDI playing? I've read on the Wiki [1] that it was necessary to enable dmix some time ago to allow multiple programs play sound at once, but this is not necessary since ALSA 1.0.9rc2, and I have alsa-lib 1.0.17a-1.
    Thank you in advance.
    Bye!
    [1] http://wiki.archlinux.org/index.php/All … ing_system.

    Surgat_ wrote:What does "rewrite ALSA so it software-mixes OSS" mean?
    It means, "do some horrendously geeky stuff which only a very small proportion of the population have the knowledge, competence, ability and free time to do for no pay."
    You're looking for an easy solution. There is no easy solution.
    It's the app that says "ALSA-compatible", and it's the app that I'm criticizing for that statement. Not you.
    Welcome to the ridiculous world of Linux audio - see jungle and my recommendation. This is what free software produces - an unholy mess of conflicting, contradicting and overlapping standards.
    Last edited by brebs (2008-10-01 21:04:34)

  • Can I surf and talk at the same time on a verizon iphone?

    I've heard that Verizon iPhones don't allow users to talk and surf at the same time. Is that true? I'm not keen on going to AT&T. If it's true, will it ever change?

    Yes. It is true because Verizon runs on CDMA which doesn't allow for surf and talk at the same time. AT&T runs on GSM which allows for surf and talk at the same time.

  • How to clone 40 mac mini at the same time using network clone (like Ghost)

    how to clone 40 mac mini at the same time using network clone (like Ghost)
    Any Ideas ?
    Thanks

    Rather than a 100% identical clone to 40 Macs, I suspect you want the same basic image to be loaded on to those 40 Macs but will require some individualisation so that for example each has a unique computer name.
    NetRestore and System Imaging Utility can do this but a lot of people including myself prefer to use DeployStudio which has more capabilities. See http://www.deploystudio.com
    DeployStudio can be used to like NetRestore to restore an image to multiple Macs at the same time which is like multiple people downloading at the same time, but it can unlike the standard NetRestore also be configured to use multicast traffic which is more like a TV broadcast whereby multiple people receive the same transmission at the same time. This can be more efficient for imaging larger numbers of computers at the same time. For example 1Gbps shared between 40 computers is only 25.6Mbps each, but if you multicast a single transmission of 100Mbps to 40 computers then all 40 can listen to it at the same time and still be receiving 100Mbps even on the same network connection.

  • Display two rows at the same time

    Hi,
    How can I show on page two rows (same iterator) at the same time.
    I can create on page input attributes and than in backing bean create two rows for iterator when I inserting data.
    (or when showing data get two rows from iterator in backing bean and set value for input attributes)
    Is there another way?
    Andreja

    Both. To show and create.
    I'm using ADF Web Services and I call method with array parametar.
    User have to create two record using form (not table) and records must be visible at the same time.
    I'm calling method that return array with two records, too.
    I can show both record in table but I have to display them using form.
    Andreja

Maybe you are looking for