Which data sources Can i use for Vendor line items

Dear Experts,
I want to load the Vendor Line Items Data.In Rsa5 I found
0fi_ap_3: Vendors: Line Items
0fi_ap_4: Vendors: Line Items with Delta Extrcation
0fi_ap_30: Vendor Line Items
What is the differences of the 3 Datasources.
Which Datasource  can i use.In my R/3 side they used EHP3.
Could you please guide me what is the use of EHP3. What Cude and Dso can I use.
Thanks in Advance.
Regards,
Srinivasan.

Dear Kulakarni,
I found few of my fields in 0FI_AP_4.I did n't find few fields can i enhance the Datasourse.
What is the respective Cube for that  Datasourse.
I check  0AP_30,but in Business Content that cube is not available.
Could you please give me guidance.
Thanks in Advance,
Srinivasan.

Similar Messages

  • Which data source to be used to bring sales data for customers???

    Hi Gurus,
    I am using 0FI_AR_4 data source for one of report for DSO calculation.
    To complete the DSO( Daily Sales outstanding) calculation in BW I need sales data also for each customer.
    And this should be for all the past 12 months. Based on past 12 months sales data for each customer DSO calculation will be done.
    As this sales data is not available in the the 0FI_AR_4 data source so which other datasource can I use for the same purpose to bbring the sales data for the customer. I am thinking of COPA datasoure..... will it be right choice????
    Or I can go with some other option???
    Thanks in advance......
    Uday Shankar.

    Uday,
    You can use datasource: [2LIS_13_VDITM - Billing Document-Item Data |http://help.sap.com/saphelp_sm32/helpdata/EN/73/0bf23839caf878e10000000a114084/frameset.htm]
    datasource provides billing data item level.
    Srini

  • Can we make use of Transaction code FKMT  for vendor line items

    Hi
    Please advise me whether we can make use of Transaction code FKMT (Account assignment model) for vendor line items as follows:
    For Example:
    Expenditure Account      Dr.       Rs.1000
             To Vendor A                                      Rs.100
             To Vendor B                                      Rs.100
             To Vendor C                                      Rs.100
              To Vendor D                                      Rs.700
    Also please advise me what to give parameters
    Thanks and Best Regards
    Shekhar
    Edited by: Shekhar Yecham on Sep 19, 2008 7:05 AM
    Edited by: Shekhar Yecham on Sep 19, 2008 7:10 AM

    Dear Kulakarni,
    I found few of my fields in 0FI_AP_4.I did n't find few fields can i enhance the Datasourse.
    What is the respective Cube for that  Datasourse.
    I check  0AP_30,but in Business Content that cube is not available.
    Could you please give me guidance.
    Thanks in Advance,
    Srinivasan.

  • Can it not possible that i can retrive it for all line items in a single qu

    I have to make report for my application in which I am facing a following problem:
    In the application there are multiple suppliers and each supplier having multiple line items and each item having multipale events. each evant having three status GREEN,RED and BLUE.
    When a user select 'all suppliers' to show the the status time span for a supplier (i.e. for a supplier how many parts and upto how much time parts are in blue, red and green status)
    to show the cumulative status time span I have to find out a event for each line item which is having nearest lower entry time from the lower part of the given time span.for this i have write following query
    SELECT * FROM parts_events
    WHERE vendorid = ? AND partid = ?
    AND visible = 'visible' AND active = 1
    AND entrytime = (SELECT MAX(entrytime) as
    entrytime from parts_events
    WHERE vendorid = ?
    AND partid = ?
    AND entrytime < ?
    AND visible = 'visible'
    AND active = 1)
    the problem is that i have to fire this query for each line item, can it not possible that i can retrive it for all line items in a single query?

    maybe if you can post some sample data and output will help us analyze more youre requirement.

  • Automatic Business Area Derivation Rule for Vendor Line Item in MIRO

    Hello Experts,
    We trying to use Business Area concept for our client.
    I have completed all configuration setting for the business are derivation like
    1. Creation of Business Area
    2. Assign Business area to Plant / Division (OMJ7)
    3. Business area determination from sales area (TVTA)
    4. Business Area by Sales Area
    5. Checked Field Status Group for Customer and Vendor Reconciliation Account
    It is working for for compelete sales process and in Procurement cylce it is picking business for MIGO transaction both the line items.
    But
    In MIRO (Purchase invoice posting) it is automatically taking Business area to the GR/IR line item and it not taking Business area for the vendor line item (automatically)
    I comes know that there is a business area derivation rule for this to happen automatically.
    Can you please propose the soulution for the automatic derivation of business in MIRO for vendor line item.
    Regards,
    Chalapathi

    Hi,
    I do mot think there is a BA derivation rule for MIRO.
    The best you can do is:
    1.  Use a user exit or enhancement point for deriving the BA from the GR/IR line and populate that in the vendor line
    or
    2.  You make BA as a mandatory field in the field status group for the vendor reconciliation account.  This will then force the user update the BA.  We use this option.  This is so because at times, the vendor item may need a different business area than the GR/IR line.
    Cheers.

  • SAP QUERY report for vendor line items

    Hi
    I have created a SAP QUERY report for vendor line items with fields vendor no.,vendor name,amount,company code and period.But there is one line item i donot know from wher system is getting it picked with is not in that vedor account,when i compare with fbl1n.I checked the document number too...the same doc number is twice in my query report.One with correct amount and another with wrong one.How do i chk.Where did i go wrong in creating query.I used logical database KDF.
    Please advise.

    i chked...how do we get the amount displayed in query...it just displays amount no debit credit symbol... i have selected BSEG-DMBTR field but no -/+ sign,how is it done in query,please suggest.

  • T.code required for Vendor line item display and Customer line item display

    Hi Gurus,
    Pl provide me transaction code for "Vendor line item display and " Customer line item display apart from FBL1n for vendor and FBL5n for customers.
    Kindly advise.
    Regards,
    Samar

    Hi,
    You could use these, for example:
    S_ALR_87012103 - List of Vendor Line Items
    S_ALR_87012197 - List of Customer Line Items
    Just curious: what's wrong with FBL1(5)N?
    Regards,
    Eli

  • Which Data-Types can be used as Widget Parameters?

    Hi,
    I have been playing about with widgets (specifically widget parameters) for a while now.
    I've got to wondering, exactly which data-types can Captivate turn into widget parameters?
    So far I know that you can use:
    Numbers,
    Strings,
    Arrays,
    Objects
    and Booleans,
    as parameters.
    Which ones am I missing?
    I know some don't work, because I tried storing a MovieClip as a parameter and that didn't work.

    Hi Eccles,
    You can set all basic data types supported in flash viz.,
    1)Numbers
    2)Strings
    3)Arrays
    4)Objects
    Since in Action script , an Object can be anything (array , array of objects , array of objects which by themselves are array of objects and so on ) , you can virtualy send anything as widget params
    But there are two caveats to this
    1)Object References
    -Object References do not have any meaning once the swf is closed.But the widget params have to be stored across sessions.So If you send a reference as part of widget params it is not going to work.
    This is why sending a Movie Clip (which is actually a reference to an Object ) does not work
    If you want to send such things you will have to 'serialize' the object.
    2)Size of the Object that you send
    The size of the object that you send can have an impact on performance.And since any object that you send has to be converted into XML , objects like bitmaps can turn out to be huge and difficult to handle.
    This brings us down to this - you can send any object across as widget param as long as it is small and serialized.

  • Full data load for vendor line items 0FI_GL_4

    Hi Experts,
    i need to delete the data from the vendor line items cube and load all the historic data from r/3 production, so how do i proceed, i am assuming that there is no setup table concept for this since its FI, so how do i do this and what are the steps that needs to be done on r/3 side as well as BW?
    Thanks,
    shetty.

    Its pretty simple in FI. There are no setup tables like LO extraction.
    1. Double click ont he cube in BW and delete all the requests. make sure all of them are deleted. (or) you can right click on the cube and say "delete data".
    2. As youa re working on production make sure ur requests and data are completely deleted. Check twice
    3. Activate your master data.
    4. replicate datasources and activate transfer structure in BW
    5. Load data from BW
                  I would think twice to delete data from a cube particularly in production. I don't know your situation but if I were u, I would create another cube copying the cube and then load all the R/3 data into the new one.
    Good luck.

  • Recurring Entry for Vendor Line Items

    Hi,
    We are using SAP ECC 5.0.
    There are recurring entries to be processed, which run into 90+ line items. These line items include GLs as well as Vendor items.
    Fast Entry and Account Assignment Model cannot be used as they accept only GL line items. Recurring entry also cannot be used as the amounts keep changing. Is there any other time saving way to make this entry? making the entry using F-02 is very time consuming and tedious.

    Hi,
    One option is to develop a BDC and calling up the FB01 or F-02 posting. An excel template needs to be designed and can be used for upload of line items. Make changes in the amounts in the excel sheet and use the upload program to post.
    Rgds.

  • To Insert Header Field for  Vendor Line Item Display FBL1N

    Hai All,
    I got a requirement that i have to add a Header item in the standard Tcode FBL1N. The client requirement is to add the Balance Carry Forward Amount Field in the Header level of the Output display.
    I have inserted the Header Text in the output display by going through Settings =>Layout => Current Header Rows but iam not able to pass a variable to that pertaining output text.
    Pls provide me the solution regarding ....

    Please note that most vendor line items wont have a PC assigned to them.
    I am not sure if you are refering to classic view or new GL data.
    Anyway you can use the sum button, and sub total for your levels.
    If you want to get the information sub totalled by PC, then I guess you are using the new GL and document splitting.
    If that is the case you cannot use FBL1N for this.
    There is however a set of reports in Accounts Payable, called new Gl reports and they will provide you the general ledger view and not the entry level view, and you can use the sum and sub total option.
    Please award points if this is useful.
    Come back if you need further help.

  • Business Area for Vendor Line Items during Payroll Posting

    Dear All
    We are in ECC 6 version of SAP. We are using Business Area for Internal Financial Statement. We are facing a problem with regard to Business area in Payroll posting. Business area does not appear in vendor line items when we make posting of payroll for multiple business area. We have setting technical accounts for HR. We read SAP note 203276 and it seems that it is possible. Can someone tell us what is the reason that business area not coming in vendor line item while payroll posting.

    Hi
    That part we have already done. The problem only come when we run payroll and there are vendors belonging to several business area in that case system keep the business area field blank. In case if we set field status required system give error. That is why we run payroll by each business area we also have maintained technical account for 1001.
    Regards

  • Advance ajdustment for Vendor line items through F110

    Hello
    We have to make advance ajustment through F110 for the Vendor line items .  Advance is posted with special indicators through F-48 and invoice booked through FB60 and MIRO.
    I have checked the configuration in FBZP "All Company Codes" where special indicators is assigned.  Still advance is not getting adjusted.
    Please help me to resolve this issue.
    Regards,

    Hello Prashant,
    Check F110 Addtional log tab > Due date check box  & also check F110 > Parameter > Next payment date it should be more that what you expecting due date selection
    Rgds
    Suma

  • Report in R/3 for vendor line item details

    Dear friends,
    Please provide direction on how we can run a report (SAP R3 or BW) that provides the vendor name/and number for all A/P transactions (both via purchase orders and direct pay) by G/L account?.
    Is it possible in SAP R/3 or do we need to develop a new report in BW?
    Please respond asap.
    Thanks in Advance....
    Rgds,
    Kunal Vichare.

    Hi
    With T code  F.41- List of vendor line items you can get with Vendor No. and Vendor Name  , with  small layout changes.
    If it is not sufficient according to your requirement go for BI it will come very nice dash board report.
    Rgds
    Vani

  • Profir Center Update for Vendor Line Item

    Hi,
    While entering an inter company document, cost center is required field for the expense line item. The system is picking up the profit center based on the cost center. However, while saving the document I  am getting a error message that you can not post to profit center XX in company code 2. The profit center is only assigned to company code 1 (KE52) and it is not to be assigned to company code 2. Ideally the vendor line item should be assigned to dummy profit center maintained in config but system is picking the profit center assigned to expense line item. The following entery is being passed and the document type is AB. Document Splitting is active.
    Expenses A/c. Dr - company code 1 - PC - XX
    To Vendor            - company code 2
    can anyone help me with the same?

    Hi,
    Validations are in 3 steps (Mostly Inter-company transaction fetch this validation in sequence)
    1) Derivation Rule
    2) Default   
    3) Dummy
    Option 1:
    T-code: 3KEI
    setup default profit centre by company code and GL Account
    if above does not resolve your issue then also setup option 2
    Option 2:
    Create substitution rule on document completion level
    If G/L account is (B/S) XXXXXX u2013 XXXXXX and company code is 2
       then PC = 2
    End if
    try first in test system
    regards,
    Prashant Rane

Maybe you are looking for