Which document types get a thumbnail and preview in Sharepoint-2013

I read in the old blogs that preview thumbnails are not supported for excel files, Is this still the same in Sharepiont 2013 ?
Right now I am using sharepoint 2013 and I am not getting preview thumbnails in the search results for excel file types. What changes do I need to make for getting the thumbnails for excel ? Can someone please help me ?
Thanks

The same question posted here - go through the thread
http://social.technet.microsoft.com/Forums/sharepoint/en-US/38794517-2eeb-46df-b781-77e634c69b1b/third-party-tool-for-document-preview-in-sharepoint-2013?forum=sharepointadmin#a0310766-399b-4f66-a762-e6394b1770e0
Regards,
Pratik Vyas | SharePoint Consultant |
http://sharepointpratik.blogspot.com
Posting is provided AS IS with no warranties, and confers no rights
Please remember to click Mark As Answer if a post solves your problem or
Vote As Helpful if it was useful.

Similar Messages

Need to create a Store Business document type for material master and store a sharepoint link

Hello,
I need to create a Store business document type for material master and store a URL link . How do I do that?( or is there any functionality to upload a document for a store business document that it will automatically saves to sharepoint?)
Thanks,
Ran.

>
dhayes12 wrote:
> A) When I do the (Material Backflush) MFBF for the 04 type, the Inspection Lot gets created OK. I then can go into QA32 and assign the correct Inspection Plat by clicking the Inspection Lot button.
>
> B) When I do the MIGO via the Purchase Order (type Z01), it will not create the Lot if I have the Multiple Specs selected in the QM Material Master MM02. If, I turn off the Multiple Specs in the QM Material Master and create a new PO and MIGO, it will create the Lot, however, it automatically assigns the lot to the wrong Inspection Plan (2nd Plan see above) I need to be able to select the plan like I can with the 04 type.
>
> Is their some setting that can be changed in Config or somewhere that acts the same way as example A above?
For case A, create insp plan with usage "1- production" If you have one IP with this usage for given material then system will assign Plan to lot automatically. In your case for second plan update usage as 1.
For case B, system should assign 1st plan make sure for both plan udage is correct. for 1st plan usage should be 5 while 2nd plan usage should be 1. Now if your 1st have status 4 and key date before lot date then system will assign plan auto.
Thanks!!!

I am having problems with the Preview application. When I try to use it to open a pdf document it gets hung-up and I have to select force quit to close it. Any ideas on how to resolve this problem? Thanks for any help

I am having problems with the Preview application. When I try to use it to open a pdf document it gets hung-up and I have to select force quit to close it. Any ideas on how to resolve this problem? Thanks for any help

Can you open the Preview program without loading a file, like by itself?
If it doesn't load then I suspect a corrupt Preview preference file.
Deleting the System Preference or other .plist file
Can you open other files with Preview, like jpg's and images?
How about other PDFs? or is it just that one you have downloaded?
Run through this list of fixes
Step by Step to fix your Mac

[Bridge CC] Is there a way to see thumbnails and preview of WMF and EMF files?

I have a big archive full of technical illustrations, designed by me in the past, saved as EMF or WMF files, very good and lightweight to import in Word documents.
In the past, Adobe Bridge (CS3 at least) was able to show thumbnails and preview of such a file type.
Now it is impossible, for me, to search and retrieve, fast enough, old files.
Is there a way to let Bridge returns to show this files?

Hi Ram,
You can see the objects included in a transport request by going to se09 and opening your transport request and drill down to the task and below the task you would have all the objects that are included in the tranport. You can also use se03 to get the details by drilling down the tansport request.
The problem with importing the function module might be because either the function module or the function group may not be active which may cause the tranport to fail. please check if both are active or not.

Resizing RAW thumbnail and preview

No one in Adobe technical support seems to be able to help me.
I've updated CS2 to CS5, and in Bridge, am unable to increase the thumbnail and preview size of .CR2 images. JPEGS, PDF, PSDs... they all resize fine. And before you ask... yes I know about the slider at the bottom. And yes I have tried all the 'cache' options.
I have also tried to create a new login with administrator rights (at the request of tech support) and it still has the same issue.
I have also reinstalled CS5 once as well.
Any suggestions? Pretty please?

Thanks for reporting back, still some questions.
Did you search for hidden cache files other than the before named cache
files?
Here or some of my thoughts about your attempts:
>> Purged the cache Bridge CS5
Have you already tried to delete the complete cache folder manually from the
user library cache/adobe/adobe Bridge CS5 location? After restart Bridge
creates a fresh, new but completely empty cache file and you need to recache
your thumbs and previews.
>> Deleted the Bridge preferences.
By this you mean the plist file from user library and combined with
restarting Bridge holding down option key and choose reset preferences?
>> Re-created the SwitchBoard preferences files.
Could you explain how? To my knowledge Switchboard resides at root level on
your system and serves Adobe Air that is also used by Bridge as part of the
CS suite. But I'm not aware of an option to recreate the preferences?
>> Updated all software including Camera Raw Plug-in and Bridge and Photoshop
That should do but for security check if you have only one version active
(in PS Menu Photoshop about plug ins - Camera Raw, it should say 6.3.0.79)
>> Created new user
Most efficient to rule out user specific problems, which brings me to the
question if you have the default application folder as place for installed
CS applications?
>> Reset all work space
It was a wild guess...
>> Deleted and reinstalled CS5 twice now
That is time spoiled if you did not use the Adobe Clean tool also to get rid
of all preferences. See this article also with the download of the clean
tool itself.
http://www.adobe.com/support/contact/cs5clean.html
I just can't understand why it is only RAW images. All other formats are fine.
It is odd.
Might narrow it down on the raw converter?
Any other suggestions?
Personally I would start from Scratch. First read about the Clean Tool and
be sure to back up all your customized settings, actions tools etc in all
CS5 applications. Use the save option as much as possible for these settings
you want to keep and give the files a proper name and new folder so you can
import them again in an easy way.
Deactivate the software and use the uninstaller that can be found in the
separate Suite applications in the application folder. Then use the clean
tool and then use a search like spotlight (but preferable the free or almost
free Easy Find that also finds hidden files) to check on all other Adobe
files that reside on your system and decide if you trash them or place them
in a separate folder outside the library.
Don't forget to delete the hidden cache files for Bridge. You will need some
time to recache the lot but if it works it is all worth it.
If it does not work I help you crying if that is of some comfort for you

Aperture constantly rebuilds same thumbnails and preview images.

What is behind Aperture 2's pathological obsession with constantly rebuilding the same thumbnails and preview images, and is there any way to stop it? I can't link this performance killing problem to any specific action on my part; I see it in many different circumstances. For example:
(1) Putting the system to sleep while Aperture is open then resuming later
(2) Hiding the Aperture app, working on other memory consuming apps for a while (e.g. Photoshop), then returning to Aperture
(3) Switching from one project to another via the "Projects" tab.
(4) Quitting Aperture then restarting it.
I can say with 100% certainty that this is not the result of some previous thumbnailing/preview generation operation that was interrupted. The # of images in the project doesn't seem to have a bearing. Nor does the type of camera or image type I've imported from the camera.
I can be happily working in Aperture, working with a project created months ago, when all of a sudden the "generating thumbnails" message and the dreaded Wait Cursor appear and my speedy, well-apportioned iMac grinds to a total halt while Aperture does the same ** thing it's already completed before.
The only hit I get when searching Apple's support site mentions a known bug for those who upgraded from Aperture 1 to version 2 but definitely does not apply to me here.

Thank you for the reply Tony. I've followed your suggestion but Aperture continues to (apparently) randomly decide to regenerate thumbnails and previews.
The problem has become bad enough that I've had to stop using Aperture completely.
Doesn't anybody from Apple read these forums? I can't possibly be the only Aperture user in the world to experience this problem...

Which document type for special PO

Hi,
Which document type should be used if I want to select all receipts on the purchase order placed by an external vendor?
/Marc

Hi,
If your question is correct and if I understand it correctly, you are asking about a document type of PO, used by a Vendor to create for you...and receipts of such POs generated....To find receipts of such document, you wanted document type....if this is correct, it could be one of the follwoing:
1) Either you have a work around solution if you are using standard SAP R/3 or ECC
So, in your project there may be a document type created to let the vendor create POs for you ....for which there must be a document type created...that you only can track it...to track it, there are many ways...you may find those out from first EKKO using user ID provided to external vendors to create POs for you.....Then run those PO#s from the result in ME2N or ME2k etc...by selecting appropriate selection parameters...(for example WE101)
2) If you are using SCM solution of SAP, it may be supplier collaboration hub
3) SUS - Supplier Self Service of SRM.....
In all the above cases, you can still find the result as explained in STEP#1 above
Regards

Which file type should I use and how I use it?

Hello!
I need to create a file with some data that has been inserted manually.
In this file, for example, there are:
ProjectName1: string1, string7… string10, date1
ProjectName2: string11, string15… string20, date2
ProjectNamek: string 100, string 116 … string 140, date1
I know only one thing: one of the strings.
What I need to find in the file:
I need to find the string at one of these rows and get its ProjectName and date.
For example: if I have string15,
I should find string15 in the file, and get its ProjectName and date:
ProjectName2, date2
Which file type should I use and how I use it? What is the best solution?
Thanks!

800512 wrote:
I need to create a file with some data that has been inserted manually.
In this file, for example, there are:
ProjectName1: string1, string7… string10, date1In addition to Pandiya's advice, if the string is always in exactly the above format
(ie:
1. ProjectName always starts the line and ends with a ':'.
2. The rest of the strings on the line are separated by ", " and will never contain ", "
you might also want to have a look at String.split().
Winston

Bridge "stops working" and displays split thumbnails and previews.

When working with Windows XP, my Photoshop/Bridge CS3 was working fine. On my new computer with Vista, Bridge acts up in strange ways. It sometimes shuts down spontaneously, causing a Windows "Bridge has stopped working" message to appear.
At other times, Bridge displays thumbnails that are split or only half there, with the preview image also split in half with the sides reversed. If I wait a few minutes, the proper thumbnails and preview finally appear, but this is a nuisance. BTW, the same copy of Bridge works just fine on my laptop with XP. When I contacted Adobe, they blamed it on Windows. When I contacted Windows, they blamed it on Adobe. Anyone with similar problems and suggested fix?
Thanks!

Hi Gerry,
as it is nearly two months since your initial post, you may have already solved your problem. In which case I'll continue with this reply for the benefit of anyone else who suffers the same affliction:
My problem was Bridge CS3 running on a 32-bit Vista Home Premium SP1, Intel Core 2 CPU T5300 @ 1.73GHz and 2GB of RAM (if that makes any difference). Like Curt, I'm no computer expert either but I was experiencing a very similar problem to your's in CS3 Bridge.
The error message contained something about the "nvlddmkm.sys" not working. The 'nvlddmkm.sys' refers to the driver for my graphics card, a 'NVIDIA GeForce Go 7300', whose driver I had recently updated (to solve a separate conflict between an updated BIOS - it never stops!).
After some fiddling, I discovered that changing the 3D Graphics setting on the Nvidia Control Panel made Bridge once again behave.
Open the Nvidia Control Panel (right click on the 'desktop' to access it).
Under the '3D Settings' task, select 'Adjust Image Settings with Preview'. This should reveal a window with an image of a slowly spinning, three-dimensional Nvidia logo. (I understand that the Nvidia Control Panel is common to all its cards.)
Under the spinning logo image there are three options for 3D settings. On my computer, while my Bridge was broken, the "Use my preference emphasizing: Balanced" option was selected. I changed the option to, "Let the 3D application decide" and crikey! - when I restarted Bridge the previews were once again working. (It may be my imagination, but Bridge appears to now be going better than ever.)
I switched the Nividia preferences a couple of times just to make sure. The change appeared to have done the job.
NB: I noticed another discussion in the forums entitled "Suddenly No Images in Bridge" which appears to be a similar problem. They resolved it this way;
"Depress and hold Ctrl-Alt-Shift when you start PS or Bridge. A menu comes up with three options. Check them all."
I didn't see that fix until I had sorted mine so I haven't tried it... but now that 'it ain't broke', I 'ain't gonna fix it'!
Hope this helps you or someone else.

Raw file thumbnail and preview problem in Bridge

When downloading raw files from my new Nikon D3, Bridge generates thumbnails that are a fixed size and the preview panel only shows a thumbnail as opposed to enlarging the image to fit the preview panel. Thumbnails and Preview still work fine with jpegs. My versions of CS3, Bridge and Version Cue are up to date, I believe.
Thanks...

Three things:
• You need to make sure you have updated to Photoshop 10.0.1, Bridge 2.1.1.9 and Camera Raw (ACR) 4.6.
• You need to purge the cache for the offending folders through the Tools menu in Bridge.
• You need the Bridge forum:
http://forums.adobe.com/community/bridge/bridge_macintosh?view=discussions&start=0#
Please post there if you need further Bridge help.
Raw files from the D300 are not supported by the old, obsolete version of ACR that gets installed by default by CS3. What you're seeing now is the embedded JPEG preview only, not the converted raw. That's why you have to upgrade to ACR 4.6

Is it possible to exclude thumbnails and previews from a vault?

I think in Aperture 1.5, vaults did not include any preview or thumbnail files, but only the files containing metadata, adjustments etc. (and the masters, unless referenced only)
Somewhere along the way to 3.0 this changed so now previews and thumbnails are backed up each time you update your vault.
This has two BIG drawbacks:
- the vault becomes much larger than necessary (I always generate large previews)
- the update process takes much longer as more files need to be copied.
On the other hand, I do not see any tangible benefit of including the extra files - provided I back up both masters and the adjustments, I should be able to regenerate thumbnails and previews after a restore following, say, a fatal hard drive error.
(If I chose to delete all previews and thumbnails prior to creating a vault, I assume that the vault would be significantly smaller, without losing any information that cannot be recreated by 'generate thumbnail/preview')
Is my understanding correct?
If so, is there a way around it?
If not, can we please have this option in Aperture 3.5 or 4.0?
Thank you!

Hi Matt. You raise an interesting point. What you say makes sense to me.
My general response is: external drives are cheap. Buy what you need and don't spend any time trying to "save" disk space. IME, the administrative overhead is far more costly than the upfront equipment costs.
Here are some specific answers (as I understand how Apeture uses Vaults).
There is no way to exclude Previews from Vaults. Each Vault includes all extant Previews.
Each Vault is a differential back-up. Updating the Vault should update only those files that have been added, changed, or deleted. Unchanged files -- including Previews -- are not backed up anew each time you update a Vault. The amount of time it takes to update a Vault will vary based on the number of changes made, and should have nothing to do with the size of the Library or the number of files in it.
You can test your hypothesis. Delete all your Previews, and create a new Vault. Let us know what you find out.
Suggestions for enhancements should be made directly to Apple via "Aperture→Provide Aperture Feedback". The forum is -- officially -- strictly for user-to-user interaction.

Missing thumbnails and previews Bridge CC x64. Help!

Week ago have missing thumbnails and previews in Bridge CC x64.
Where are no thumbnails cannot preview and open in photoshop.
What can i do? Please help!
Thanks!

Thanks, station_two!
I have surprised there all pictures from OneDrive on Windows 8.1.
When i copy those out of OneDrive thumbnails generated
Then copy all folder with images back and all works good!
Very strange. But good!

Thumbnails and Previews have a green tinge

The thumbnails and previews in my library have suddenly developed a green tinge.
I have tried Update Previews, Generate Thumbnails, and Generate Previews with no success. I have also used Repair database and Rebuild database, again with no positive result.
I am at a loss to know what to do next.
Jerry

I have a similar issue, but it doesn't seem to affect all thumbnails.
Thumbnails have thos unprocessed raw look (bluish, greenish tint):
But they look fine once you open the real pictiure:
What could possibly cause this problem? I have re-generated prebviews and thumbnails but can't seem to solve the problem.

Alpha channels really have messed up thumbnails and Previews

In AP2 I use to have to put a blank (all white) layer above any alpha channels so the thumbnails would build properly. Now in Ap3 The thumbnails and Previews are screwed up so they are totaly unrecognizable or not showing up at all even after deleting and re generating them. I've placed a bug report with apple but I need a solution or a work around fast.
Thanks to all who help.

When you look at the songs in your Music library in iTunes, does the artist name have any punctuation in the artist column?
I know with some MP3's I ripped from CD before iTunes was available, I had put both title and artist in the title field, and until I corrected them they didn't show up correctly on my iPod.

Thumbnail and preview transparency

thumbnail and preview transparency. i mean, this is essential.

Yes, absolutely.
I am an adamant supporter of Photoshop and Bridge for their usability - so I am shocked to see Bridge can not show the transparency of my .tga images, while a 25$ codec pack for Windows 7 can.
Am I seriously expected to open every single image in Photoshop to check on the alpha channel???
Any hint on where to enable this feature would be greatly appreciated - just in case this fundamental option is simply well-hidden.

Which document types get a thumbnail and preview in Sharepoint-2013

Similar Messages

Maybe you are looking for