Which hp printers use wpa2-psk
My new Netgear R6300 only wants to use wpa2-psk (aes). My old HP printer can not do this security code. Need to get a new HP printer, which one has this level of encription?
Hello, and Welcome to the HP Support Community!
wpa-psk (either AES or TKIP) is pretty standard these days. Looking at my year-old OfficeJet 8600 Pro, it easily supports this method and is the way I have it connected to my home network.
We just installed a newer 8610 at the office, and it had no problems with the wpa/wpa2 encryption scheme either!
I believe you will be safe with any present-day HP printer that offers wireless connectivity.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!
Similar Messages
-
Which hp printers uses wpa2-psk(aes)
Need to update my HP printer. New router wants to use the newer wpa-psk(aes), want to buy HP that has same. Do not see this info on any of the descriptions of the newer printers. Help.
This question was solved.
View Solution.Hello, and Welcome to the HP Support Community!
wpa-psk (either AES or TKIP) is pretty standard these days. Looking at my year-old OfficeJet 8600 Pro, it easily supports this method and is the way I have it connected to my home network.
We just installed a newer 8610 at the office, and it had no problems with the wpa/wpa2 encryption scheme either!
I believe you will be safe with any present-day HP printer that offers wireless connectivity.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked! -
Unable to connect to Wi-Fi connection using WPA2 PSK authentication and encryption type TKIP
I was referred to here from this thread at the Windows Insider Program: http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_web/unable-to-connect-to-wi-fi-connection-using-wpa2/07bae1ed-c7fb-4f85-9d26-5549cc23e57a?msgId=2eb70420-fe35-494b-a13d-dcacd4d55eb9&rtAction=1426697691002
My issue is copy/pasted below:
Original Title: TKIP selection in WiFi network settings
I have a workplace WiFi connection using WPA2 PSK authentication and encryption type TKIP.
On the machine I used to test Windows 10, I had a previous installation of Windows 7 professional which connected to my workplace WiFi using the above settings. After installing Windows 10, my workplace wifi settings were imported and worked fine.
Windows 10 had a system crash, and since I had deleted my previous windows installation, I performed a complete reinstall of Windows 7. However, when I went to install Windows 10 again, I had not taken the time to set up my workplace Wifi on Windows
7 before installing Windows 10. As a result, I had to set up my workplace wifi as a new connection in Windows 10.
When going to set up the wifi connection, the encryption type was grayed out, but appeared to default to AES. Searching the internet suggested that Windows 8.1 did not need a encryption type selected, because Windows could automatically determine
if it was TKIP or AES, hence why the option to select encryption type was grayed out. However, after completing the setup of my workplace wifi, Windows 10 could not connect to my workplace wifi. After restoring Windows 7 with a factory reset, and setting up
the workplace wifi (the encryption type selection was not grayed out and I manually selected TKIP encryption), my workplace wifi was working again.I was referred to here from this thread at the Windows Insider Program: http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_web/unable-to-connect-to-wi-fi-connection-using-wpa2/07bae1ed-c7fb-4f85-9d26-5549cc23e57a?msgId=2eb70420-fe35-494b-a13d-dcacd4d55eb9&rtAction=1426697691002
My issue is copy/pasted below:
Original Title: TKIP selection in WiFi network settings
I have a workplace WiFi connection using WPA2 PSK authentication and encryption type TKIP.
On the machine I used to test Windows 10, I had a previous installation of Windows 7 professional which connected to my workplace WiFi using the above settings. After installing Windows 10, my workplace wifi settings were imported and worked fine.
Windows 10 had a system crash, and since I had deleted my previous windows installation, I performed a complete reinstall of Windows 7. However, when I went to install Windows 10 again, I had not taken the time to set up my workplace Wifi on Windows
7 before installing Windows 10. As a result, I had to set up my workplace wifi as a new connection in Windows 10.
When going to set up the wifi connection, the encryption type was grayed out, but appeared to default to AES. Searching the internet suggested that Windows 8.1 did not need a encryption type selected, because Windows could automatically determine
if it was TKIP or AES, hence why the option to select encryption type was grayed out. However, after completing the setup of my workplace wifi, Windows 10 could not connect to my workplace wifi. After restoring Windows 7 with a factory reset, and setting up
the workplace wifi (the encryption type selection was not grayed out and I manually selected TKIP encryption), my workplace wifi was working again. -
Unable to connect to home network (WPA2-PSK, works on Windows)
Hello!
I am having problems with connecting to my home network (on a FRITZ!Box Fon WLAN 7360 SL) which uses WPA2-PSK encryption.
Windows works normally so I don't think that it is a router issue.
In addition, I managed to connect to my Universities WPA2 network and another unsecured network without problems.
I tried netcfg+wpa_supplicant, wpa_supplicant on its own and wicd (on a sidenote, wicd didn't even manage to connect to the router when using a cable). None worked.
This is the wpa_supplicant conf file that I am using:
## wpa_aachen.conf
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=wheel
ap_scan=1
fast_reauth=1
network={
ssid="myssid"
psk=hexcode
proto=WPA RSN
key_mgmt=WPA-PSK
pairwise=CCMP TKIP
I am getting an "authentication timeout" error everytime I try. Yes, I double and triple checked the passphrase. I also tried it via hexcode and plaintext passphrase.
Does anybody have any suggestions?
Last edited by lorizean (2012-10-14 20:59:49)Ive been trying the same thing for several hours googling it etc. wicd doesnt work always ends up with bad password error no matter what..
so.. this worked for me:
get into term as root and type:
NetworkManager start
then it will pop up in the notification area click network settings / wireless /connect to hidden network and type name, pass and it connect just fine..
really simple and it works -
AP541N & SA520W Support Wireless WPA2-PSK Bridging?
just wanted to know if the SA520W can wirelessly bridge (Workgroup bridge, WDS, etc -don't care which) to either an AP541N or AP1252... using WPA2-PSK
the 2 seperate examples would be
Internet --->SA520W --(Wireless 30 feet) --->AP541N -->ESW-540-24P-K9
internet --->Sa520W --(Wireless 30 feet)----> AP1252 -->ESW-540-24P-K9
internet --->AP1252 ---(Wireless 30 feet) ---->SA520W-->ESW-540-24P-K9
in other words do you just go into the config of the SA520W ... enter in an existing SSID name and the WPA2-PSK password and it joins that wireless network.
lastly does the SA520W support POE to the switch above or only the AP541N
thanks again
Kevin[bump]
Same question. I would like to bridge the SA520W to an AP541N via a wired connection, since WDS doesn't seems to be an option.
Anyone ? -
Does Compaq Presario R3000 (AMD) Notebook PC support WPA2-PSK?
Hello all,
I know this is an old laptop(Compaq Presario R3000 (AMD) Notebook PC).
Recently, I upgraded my network system and start to use WPA2-PSK.
I have installed the patch from MS http://www.microsoft.com/en-us/download/details.aspx?id=1974
However, the droplist of my network wireless setting still doesn't show the option
for wpa2 but wpa.
Can someone tell me the reason? Is it beause that my network adapter doesn't support
the new standard wpa2?
Thank you
This question was solved.
View Solution.I believe this driver will take care of the issue...
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=3688870&sp...
Again, in addition to the above driver you also must be running XP SP3 in order to get WPA2 support if that microsoft SP2 WPA2 patch doesn't work. -
Greetings -
I currently have a Cisco AIR-AP1231G-A-K9 that is running IOS version 12.3(8)JEA1. I am trying to setup WPA2 "Personal" (WPA2-PSK) with a client running Windows XP SP2. The WLAN Nic is a Cisco a/b/g PCMCIA, driver version 2.5.0.22. I have configured the PSK on both the AP and the client and verified that I did not make a typing mistake. I have installed the Microsoft WPA2 hotfix to see if that was causing the problem but it is not. The actual problem is that the client says it's "Authenticated" but will not allow any traffic to pass through. Whenever I created an SSID NOT using WPA2-PSK, the client can ge an IP address and things function normally. Here is the current AP configuration:
sh run
Building configuration...
Current configuration : 4170 bytes
version 12.3
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname AP1
enable secret ****
ip subnet-zero
no aaa new-model
dot11 vlan-name Joes-VLANofFUN vlan 237
dot11 vlan-name Joes-VLANofFUN-PartII vlan 238
dot11 ssid -=b0Gg$=-
vlan 237
authentication open
--More-- authentication key-management wpa
wpa-psk ascii ****
username Cisco password ****
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
encryption vlan 237 mode ciphers aes-ccm
ssid -=b0Gg$=-
--More-- speed basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
no power client local
power client 50
power local cck 50
power local ofdm 30
station-role root
bridge-group 1
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface Dot11Radio0.237
encapsulation dot1Q 237
no ip redirects
no ip unreachables
no ip proxy-arp
no ip route-cache
no cdp enable
bridge-group 237
bridge-group 237 subscriber-loop-control
bridge-group 237 block-unknown-source
--More-- no bridge-group 237 source-learning
no bridge-group 237 unicast-flooding
bridge-group 237 spanning-disabled
interface FastEthernet0
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
no ip route-cache
speed 100
full-duplex
hold-queue 160 in
interface FastEthernet0.237
encapsulation dot1Q 237
no ip redirects
no ip unreachables
no ip proxy-arp
no ip route-cache
no cdp enable
bridge-group 237
--More-- bridge-group 237 subscriber-loop-control
bridge-group 237 block-unknown-source
no bridge-group 237 source-learning
no bridge-group 237 unicast-flooding
bridge-group 237 spanning-disabled
interface FastEthernet0.238
encapsulation dot1Q 238 native
no ip redirects
no ip unreachables
no ip proxy-arp
no ip route-cache
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
interface BVI1
ip address 10.238.1.100 255.255.0.0
no ip redirects
no ip unreachables
no ip proxy-arp
no ip route-cache
--More-- ip default-gateway 10.238.1.10
no ip http server
ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
control-plane
bridge 1 route ip
line con 0
privilege level 15
logging synchronous
line vty 0 4
login local
end
I have tried upgrading the WLAN NIC drivers to the latest version (3.5 I believe) but it does not help. If I run the troubleshooting task of the Aironet Desktop Utility is sasys that the Authentication tests failed, even though the status shows me as "Authenticated". Perhaps there is something in the above config that I am missing.
Any help would be greatly appreciated.
JoeCheck the hardware version of your AP radio(S).
Earlier versions (ending in "20") do not support AES (used for WPA2 / 802.11i).
You should have at least a "Radio AIR-MP31G " for your 802.11G and "Radio AIR-RM21A" for your 802.11a radio.
THe (probably) easiest way to check this is the Web GUI ... go to INterfaces, select each band, then the "Detailed Status" tab.
If your radios are older than this, the CLI and GUI will accept your configuration for WPA2/802.11i, but will not operate in that mode (and usually fail).
Either radio is independently upgradeable for ~US$100.00 through someplace like www.cdw.com.
Good Luck
Scott -
WPA2 PSK Protected Management Frames Support
Hi I have been trying to connect the above printer using WPA2 PSK security mode with my router. This failed every time until I disable Protect Management Frames within the router. All my other devices connect fine some I have confirmed support PMF. As PMF is now mandatory as of July 2014 does HP fully support PMF with there drivers?
Few things I would just change:
Load Balancing................................... Enabled <---Disable this!!!!
Band Select...................................... Enabled <--- Disable this since you have 802.1b/g only defined in the WLAN
CCX - AironetIe Support.......................... Enabled <---Disable this too for now
Thanks,
Scott
*****Help out other by using the rating system and marking answered questions as "Answered"***** -
Hi to all,
I have a T61 and i'm trying to connect to the Internet with WiFi.
I have an access point by Zyxel and i'm able to connect well with my other two laptops (by dell). I use WPA2-psk and dhcp.
I've red that in order to connect in wpa2 with the T61 I have to update the os (win xp sp2) to sp3.
I'm going to update to sp3 and I would also like to update the ThinkVantage Access Connections following this link:
http://www-307.ibm.com/pc/support/site.wss/tvsu-update.html
But i'd like to know: Will the update keeps the locations that i've configured (5) or will delete every configuration i made before?
Thankyou in advance, torcHHi again.
My T61 is a: 7664-r6g.
I've done every update (win xp sp 3, thinkvantage, intel wireles drivers).
But in -think vantage- , when i try to set a new loceation configuration, i never get WPA2 in the "securitiy setting".
Can you help me? Thnaks -
1st gen MBP won't connect to WiFi when WPA2-PSK [AES] security is enabled
Hi all,
I've got a pretty vexing problem involving my old MacBook Pro and my WiFi, and I'm hoping to find an explanation or solution to it. Recently, my husband purchased a brand-spanking new (PC) laptop with n wireless capabilities, and I've been trying to reconfigure my home network so that the router is broadcasting in 2.4 gHz b/g/n mode. When I set the router (a Netgear N600 dual band) to broadcast in "up to 300Mbps" mode, it tells me that "WPA-PSK [TKIP] may only operate at "Up to 54Mbps" (legacy G) rate, not N rate. NETGEAR recommends that you use WPA2-PSK [AES] to get full N rate support."
So, naturally I go and set the security to WPA2, and my 1st gen MacBook Pro (it only has a CoreDuo, and hence, a b/g card) promptly proceeds to spazz out. Sometimes it sees the network, sometimes it doesn't. When it does see the network, the connection times out, and I can never successfully establish a connection. Right now, I've got the Wifi broadcasting up to 300Mbps, but the security is set to mixed WPA-PSK [TKIP] + WPA2-PSK [AES], so I'm not even sure if my husband is getting Wireless-N functionality on his end of things.
Has anyone else had a problem like this, and is there any solution for it? Should I upgrade my wireless card (Can I even upgrade my wireless card???), is it a software issue, etc. I'm aware that there have been a number of issues with wireless connectivity in Mac laptops over the past few years, and I really hope this isn't one of them.
Thanks in advance for your help!I believe the issue is the fact that the Netgear router supports wide-channel operation in the 2.4 GHz band. This is how they are able to advertize that you can get up to 300 Mbps. Apple computers/routers only support narrow-channels on this band.
What I would suggest is that if the Netgear has an option to both use narrow-channels and WPA2/AES security, to use this combination. Your Mac should be able to connect and his PC should get at least 120-130 Mbps. Note: Although not broadcasting at 300 Mbps, the Netgear will still be operating in the 802.11n radio mode. -
Is it possible to use HP Laserjet P1005 with OS X Mavericks? If not which HP printers can I use?
Is it possible to use HP Laserjet P1005 with OS X Mavericks? If not which HP printers can I use now?
https://discussions.apple.com/message/23481997#23481997
You can also check the HP web site for drivers.
HP Support
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4159&lc=en&cc=us&dlc=en&s w_lang=&product=3435676 -
Wga54g connecting to sony blu ray using WPA-PSK (TKIP) or WPA2-PSK (AES)
My Wga54g is to be the interenet source to my sony blu ray player. I have a wireless broadband router modem setup that uses WPA-PSK (TKIP) and WPA2-PSK (AES). How do I configure everything to work? Since the WGA54G only does WEP is there a way to configure it or the Sony Blu ray to get a internet signal to it? The sony seems to have a automatic IP or manual IP configuration setting option. I suppose I can step down to WEP on the router settings but I'd rather not. I tried that and couldn't get it to work regardless. Please help!
To connect the Wireless-G Game adapter to a wireless network, please determine your SSID, Wireless Security and/or Network Key. Second you need to lower down the security mode to WEP, since WGA54G do not have any other security mode. Here is the link for connecting the Wireless Network using a WGA54G: http://www6.nohold.net/Cisco2/ukp.aspx?pid=93&login=1&vw=1&app=search&articleid=4558&userrole=Linksy...
-
No connection to Aironet 1602i Autonomous while using WPA2 Mandatory PSK with AES encryption
Hello,
I got a Cisco Aironet 1602i with Firmware 15.2.4-JB5. I have configured it to Broadcast a single SSID with Mandatory WPA2 PSK. The Encryption is set to AES CCMP. If I connect to the Network with three different Windows 8.1 Notebooks they will connect and authenticate, but the connection does not work. In fact, the notebook doesn't even receive an IP adress from my DHCP Server. Strange thing is, that the DHCP knows the notebook is there and assigns an IP, but the notebook doesn't receive it. If I assign static IP Adresses to the notebooks network cards, there is still no traffic going through. My mobile phone & my ebook reader work fine. They are listed as "unknown" clients in the Associations tab" but the network works on these devices. If I set the encryption to AES CCMP + TKIP the notebooks will connect (using TKIP) and everything works fine. I have used the Accesspoint with the same configuration for about one year. It suddenly stopped working three days ago. I have already reset the configuration (using write default-config) and reinstalled the firmware. I have set the configuration manually afterwards (doesn't matte if using webinterface or CLI) but the problem remains unsolved.
Help please :DHello again,
the Problem is not that the Intel utility takes too much time, but that the notebooks seem to Connect but dont communicate at all if using the Windows integrated connection manager.
I would prefer not to use the Intel utility at all, but to install the driver alone and use the Windows connection manager. I'm using a cheap access point of another brand at the moment and the problem does not exist there. With the same security settings.
I would like to use the Cisco AP again because range and data throughput are better.
Did I understand correctly that noone else has reported a similar Problem ? -
i have printers at home and work. i need help programing my macbook print utility so computer knows which printer to use depending on where i am. thanks
Look for cloud solutions such as DropBox, OneDrive, SugarSync or others. They are all cloud based services that sync documents between computers via the cloud. Of course another solution is simply a flash drive formatted in exFat so that Macs and Windows computers can read it.
-
WLAN User Idle Timeout and WPA2-PSK authentication
Hi,
There is a WLAN for Guest users with Session Timeout of 65535 sec and User Idle Timeout of 28800 sec. The WLAN uses PSK as Layer-2 authentication and Web Auth as Layer-3 authentication. Authentication source is locally created users on the controllers (LocalEAP) - can be RADIUS through ISE as well.
(Cisco Controller) show>sysinfo
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 7.6.130.0
RTOS Version..................................... 7.6.130.0
Bootloader Version............................... 7.6.130.0
Emergency Image Version.......................... 7.6.130.0
Build Type....................................... DATA + WPS
System Name...................................... vwlc-1
System Location.................................. Matrix
System Contact................................... IT HelpDesk Matrix
System ObjectID.................................. 1.3.6.1.4.1.9.1.1631
IP Address....................................... 10.10.10.50
System Up Time................................... 6 days 17 hrs 30 mins 26 secs
System Timezone Location......................... (GMT+10:00) Sydney, Melbourne, Canberra
System Stats Realtime Interval................... 5
System Stats Normal Interval..................... 180
Configured Country............................... AU - Australia
--More-- or (q)uit
State of 802.11b Network......................... Enabled
State of 802.11a Network......................... Enabled
Number of WLANs.................................. 2
Number of Active Clients......................... 0
Burned-in MAC Address............................ 00:0C:29:74:15:2F
Maximum number of APs supported.................. 200
(Cisco Controller) show> wlan 2
WLAN Identifier.................................. 2
Profile Name..................................... Matrix-LocalEAP
Network Name (SSID).............................. Matrix-LocalEAP
Status........................................... Enabled
MAC Filtering.................................... Disabled
Broadcast SSID................................... Enabled
AAA Policy Override.............................. Disabled
Network Admission Control
Client Profiling Status
Radius Profiling ............................ Disabled
DHCP ....................................... Disabled
HTTP ....................................... Disabled
Local Profiling ............................. Disabled
DHCP ....................................... Disabled
HTTP ....................................... Disabled
Radius-NAC State............................... Disabled
SNMP-NAC State................................. Disabled
Quarantine VLAN................................ 0
Maximum number of Associated Clients............. 0
Maximum number of Clients per AP Radio........... 200
Number of Active Clients......................... 0
Exclusionlist Timeout............................ 60 seconds
Session Timeout.................................. 65535 seconds
User Idle Timeout................................ 28800 seconds
Sleep Client..................................... disable
Sleep Client Timeout............................. 12 hours
User Idle Threshold.............................. 0 Bytes
NAS-identifier................................... vwlc-1
CHD per WLAN..................................... Enabled
Webauth DHCP exclusion........................... Disabled
Interface........................................ management
Multicast Interface.............................. Not Configured
WLAN IPv4 ACL.................................... unconfigured
WLAN IPv6 ACL.................................... unconfigured
WLAN Layer2 ACL.................................. unconfigured
mDNS Status...................................... Disabled
mDNS Profile Name................................ unconfigured
DHCP Server...................................... Default
DHCP Address Assignment Required................. Enabled
Static IP client tunneling....................... Disabled
Quality of Service............................... Silver
Per-SSID Rate Limits............................. Upstream Downstream
Average Data Rate................................ 0 0
Average Realtime Data Rate....................... 0 0
Burst Data Rate.................................. 0 0
Burst Realtime Data Rate......................... 0 0
Per-Client Rate Limits........................... Upstream Downstream
Average Data Rate................................ 0 0
Average Realtime Data Rate....................... 0 0
Burst Data Rate.................................. 0 0
Burst Realtime Data Rate......................... 0 0
Scan Defer Priority.............................. 4,5,6
Scan Defer Time.................................. 100 milliseconds
WMM.............................................. Allowed
WMM UAPSD Compliant Client Support............... Disabled
Media Stream Multicast-direct.................... Disabled
CCX - AironetIe Support.......................... Enabled
CCX - Gratuitous ProbeResponse (GPR)............. Disabled
CCX - Diagnostics Channel Capability............. Disabled
Dot11-Phone Mode (7920).......................... Disabled
Wired Protocol................................... 802.1P (Tag=2)
Passive Client Feature........................... Disabled
Peer-to-Peer Blocking Action..................... Disabled
Radio Policy..................................... All
DTIM period for 802.11a radio.................... 1
DTIM period for 802.11b radio.................... 1
Radius Servers
Authentication................................ 10.10.10.70 1812
Accounting.................................... 10.10.10.70 1813
Interim Update............................. Disabled
Framed IPv6 Acct AVP ...................... Prefix
Dynamic Interface............................. Disabled
Dynamic Interface Priority.................... wlan
Local EAP Authentication......................... Enabled (Profile 'local-eap-matrix')
Security
802.11 Authentication:........................ Open System
FT Support.................................... Disabled
Static WEP Keys............................... Disabled
802.1X........................................ Disabled
Wi-Fi Protected Access (WPA/WPA2)............. Enabled
WPA (SSN IE)............................... Disabled
WPA2 (RSN IE).............................. Enabled
TKIP Cipher............................. Disabled
AES Cipher.............................. Enabled
Auth Key Management
802.1x.................................. Disabled
PSK..................................... Enabled
CCKM.................................... Disabled
FT-1X(802.11r).......................... Disabled
FT-PSK(802.11r)......................... Disabled
PMF-1X(802.11w)......................... Disabled
PMF-PSK(802.11w)........................ Disabled
FT Reassociation Timeout................... 20
FT Over-The-DS mode........................ Disabled
GTK Randomization.......................... Disabled
SKC Cache Support.......................... Disabled
CCKM TSF Tolerance......................... 1000
WAPI.......................................... Disabled
Wi-Fi Direct policy configured................ Disabled
EAP-Passthrough............................... Disabled
CKIP ......................................... Disabled
Web Based Authentication...................... Enabled
IPv4 ACL........................................ Unconfigured
IPv6 ACL........................................ Unconfigured
Web-Auth Flex ACL............................... Unconfigured
Web Authentication server precedence:
1............................................... local
2............................................... radius
3............................................... ldap
Web-Passthrough............................... Disabled
Conditional Web Redirect...................... Disabled
Splash-Page Web Redirect...................... Disabled
Auto Anchor................................... Disabled
FlexConnect Local Switching................... Enabled
flexconnect Central Dhcp Flag................. Disabled
flexconnect nat-pat Flag...................... Disabled
flexconnect Dns Override Flag................. Disabled
flexconnect PPPoE pass-through................ Disabled
flexconnect local-switching IP-source-guar.... Disabled
FlexConnect Vlan based Central Switching ..... Disabled
FlexConnect Local Authentication.............. Disabled
FlexConnect Learn IP Address.................. Enabled
Client MFP.................................... Optional
PMF........................................... Disabled
PMF Association Comeback Time................. 1
PMF SA Query RetryTimeout..................... 200
Tkip MIC Countermeasure Hold-down Timer....... 60
Eap-params.................................... Disabled
AVC Visibilty.................................... Disabled
AVC Profile Name................................. None
Flow Monitor Name................................ None
Split Tunnel (Printers).......................... Disabled
Call Snooping.................................... Disabled
Roamed Call Re-Anchor Policy..................... Disabled
SIP CAC Fail Send-486-Busy Policy................ Enabled
SIP CAC Fail Send Dis-Association Policy......... Disabled
KTS based CAC Policy............................. Disabled
Assisted Roaming Prediction Optimization......... Disabled
802.11k Neighbor List............................ Disabled
802.11k Neighbor List Dual Band.................. Disabled
Band Select...................................... Disabled
Load Balancing................................... Disabled
Multicast Buffer................................. Disabled
Mobility Anchor List
WLAN ID IP Address Status
802.11u........................................ Disabled
MSAP Services.................................. Disabled
Local Policy
Priority Policy Name
The wireless user on joining the WLAN enters the PSK and than gets redirected to WLC Web Auth portal for authentication. On successful login, the user is granted access. The issue is that despite Idle Timeout being 28800 sec (8 hours), the WLC removes the client entry before 8 hours if the device goes to sleep - mostly within the first hour. Tested this on Windows 7 notebook multiple times. When the PC is put to sleep, the WLC loses its record after some time. When PC wakes up, it has to undergo Web Auth again. Debugging the client MAC generates these logs - from initial association to final clearing.
(Cisco Controller) >*apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 Association received from mobile on BSSID 00:26:cb:4c:89:d1
*apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 Global 200 Clients are allowed to AP radio
*apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 Max Client Trap Threshold: 0 cur: 1
*apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 Rf profile 600 Clients are allowed to AP wlan
*apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 override for default ap group, marking intgrp NULL
*apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 Applying Interface policy on Mobile, role Local. Ms NAC State 2 Quarantine Vlan 0 Access Vlan 10
*apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 Re-applying interface policy for client
*apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 10.10.1.130 WEBAUTH_REQD (8) Changing IPv4 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:2219)
*apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 10.10.1.130 WEBAUTH_REQD (8) Changing IPv6 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:2240)
*apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 apfApplyWlanPolicy: Apply WLAN Policy over PMIPv6 Client Mobility Type
*apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 In processSsidIE:4850 setting Central switched to FALSE
*apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 Applying site-specific Local Bridging override for station 3c:a9:f4:0b:91:70 - vapId 2, site 'default-group', interface 'management'
*apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 Applying Local Bridging Interface Policy for station 3c:a9:f4:0b:91:70 - vlan 10, interface id 0, interface 'management'
*apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 processSsidIE statusCode is 0 and status is 0
*apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 processSsidIE ssid_done_flag is 0 finish_flag is 0
*apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 STA - rates (6): 152 36 176 72 96 108 0 0 0 0 0 0 0 0 0 0
*apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 suppRates statusCode is 0 and gotSuppRatesElement is 1
*apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 Processing RSN IE type 48, length 22 for mobile 3c:a9:f4:0b:91:70
*apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 AID 1 in Assoc Req from flex AP 00:26:cb:4c:89:d0 is same as in mscb 3c:a9:f4:0b:91:70
*apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 apfMs1xStateDec
*apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 10.10.1.130 WEBAUTH_REQD (8) Change state to START (0) last state WEBAUTH_REQD (8)
*apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 pemApfAddMobileStation2: APF_MS_PEM_WAIT_L2_AUTH_COMPLETE = 0.
*apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 10.10.1.130 START (0) Initializing policy
*apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 10.10.1.130 START (0) Change state to AUTHCHECK (2) last state START (0)
*apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 10.10.1.130 AUTHCHECK (2) Change state to 8021X_REQD (3) last state AUTHCHECK (2)
*apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 Encryption policy is set to 0x80000001
*apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 Central switch is FALSE
*apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 Sending Local Switch flag = 1
*apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 10.10.1.130 8021X_REQD (3) DHCP Not required on AP 00:26:cb:4c:89:d0 vapId 2 apVapId 2for this client
*apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 Not Using WMM Compliance code qosCap 00
*apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 10.10.1.130 8021X_REQD (3) Plumbed mobile LWAPP rule on AP 00:26:cb:4c:89:d0 vapId 2 apVapId 2 flex-acl-name:
*apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 apfPemAddUser2 (apf_policy.c:333) Changing state for mobile 3c:a9:f4:0b:91:70 on AP 00:26:cb:4c:89:d0 from Associated to Associated
*apfMsConnTask_0: Feb 04 07:48:10.563: 3c:a9:f4:0b:91:70 apfPemAddUser2:session timeout forstation 3c:a9:f4:0b:91:70 - Session Tout 65535, apfMsTimeOut '65535' and sessionTimerRunning flag is 0
*apfMsConnTask_0: Feb 04 07:48:10.563: 3c:a9:f4:0b:91:70 Scheduling deletion of Mobile Station: (callerId: 49) in 65535 seconds
*apfMsConnTask_0: Feb 04 07:48:10.563: 3c:a9:f4:0b:91:70 Func: apfPemAddUser2, Ms Timeout = 65535, Session Timeout = 65535
*apfMsConnTask_0: Feb 04 07:48:10.563: 3c:a9:f4:0b:91:70 Sending Assoc Response to station on BSSID 00:26:cb:4c:89:d1 (status 0) ApVapId 2 Slot 0
*apfMsConnTask_0: Feb 04 07:48:10.563: 3c:a9:f4:0b:91:70 apfProcessAssocReq (apf_80211.c:8294) Changing state for mobile 3c:a9:f4:0b:91:70 on AP 00:26:cb:4c:89:d0 from Associated to Associated
*pemReceiveTask: Feb 04 07:48:10.563: 3c:a9:f4:0b:91:70 10.10.1.130 Removed NPU entry.
*spamApTask7: Feb 04 07:48:10.566: 3c:a9:f4:0b:91:70 Sent 1x initiate message to multi thread task for mobile 3c:a9:f4:0b:91:70
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: 3c:a9:f4:0b:91:70 Creating a PKC PMKID Cache entry for station 3c:a9:f4:0b:91:70 (RSN 2)
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: 3c:a9:f4:0b:91:70 Resetting MSCB PMK Cache Entry 0 for station 3c:a9:f4:0b:91:70
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: 3c:a9:f4:0b:91:70 Removing BSSID 00:26:cb:4c:89:d1 from PMKID cache of station 3c:a9:f4:0b:91:70
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: 3c:a9:f4:0b:91:70 Setting active key cache index 0 ---> 8
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: 3c:a9:f4:0b:91:70 Setting active key cache index 8 ---> 0
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: 3c:a9:f4:0b:91:70 Adding BSSID 00:26:cb:4c:89:d1 to PMKID cache at index 0 for station 3c:a9:f4:0b:91:70
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: New PMKID: (16)
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: [0000] 67 67 8f 7d 2a 8d 78 f9 6d 29 c7 74 d2 fd 6a 25
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: 3c:a9:f4:0b:91:70 Initiating RSN PSK to mobile 3c:a9:f4:0b:91:70
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: 3c:a9:f4:0b:91:70 EAP-PARAM Debug - eap-params for Wlan-Id :2 is disabled - applying Global eap timers and retries
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: 3c:a9:f4:0b:91:70 dot1x - moving mobile 3c:a9:f4:0b:91:70 into Force Auth state
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: 3c:a9:f4:0b:91:70 Skipping EAP-Success to mobile 3c:a9:f4:0b:91:70
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: 3c:a9:f4:0b:91:70 EAPOL Header:
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: 00000000: 02 03 5f 00 .._.
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: 3c:a9:f4:0b:91:70 Found an cache entry for BSSID 00:26:cb:4c:89:d1 in PMKID cache at index 0 of station 3c:a9:f4:0b:91:70
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: 3c:a9:f4:0b:91:70 Found an cache entry for BSSID 00:26:cb:4c:89:d1 in PMKID cache at index 0 of station 3c:a9:f4:0b:91:70
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: Including PMKID in M1 (16)
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: [0000] 67 67 8f 7d 2a 8d 78 f9 6d 29 c7 74 d2 fd 6a 25
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: 3c:a9:f4:0b:91:70 Starting key exchange to mobile 3c:a9:f4:0b:91:70, data packets will be dropped
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: 3c:a9:f4:0b:91:70 Sending EAPOL-Key Message to mobile 3c:a9:f4:0b:91:70
state INITPMK (message 1), replay counter 00.00.00.00.00.00.00.00
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: 3c:a9:f4:0b:91:70 Sending EAPOL-Key Message to mobile 3c:a9:f4:0b:91:70
state INITPMK (message 1), replay counter 00.00.00.00.00.00.00.00
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: 3c:a9:f4:0b:91:70 Allocating EAP Pkt for retransmission to mobile 3c:a9:f4:0b:91:70
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: 3c:a9:f4:0b:91:70 mscb->apfMsLwappLradNhMac = 00:0c:29:e4:e9:6a mscb->apfMsLradSlotId = 0 mscb->apfMsLradJumbo = 0 mscb->apfMsintIfNum = 1
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: 3c:a9:f4:0b:91:70 mscb->apfMsBssid = 00:26:cb:4c:89:d0 mscb->apfMsAddress = 3c:a9:f4:0b:91:70 mscb->apfMsApVapId = 2
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: 3c:a9:f4:0b:91:70 dot1xcb->snapOrg = 00 00 00 dot1xcb->eapolWepBit = 0 mscb->apfMsLwappLradVlanId = 10 mscb->apfMsLwappMwarInet.ipv4.addr = 168430130
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: 3c:a9:f4:0b:91:70 mscb->apfMsLwappMwarPort = 5246 mscb->apfMsLwappLradInet.ipv4.addr = 168427904 mscb->apfMsLwappLradPort = 41879
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.567: 3c:a9:f4:0b:91:70 Received EAPOL-Key from mobile 3c:a9:f4:0b:91:70
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.568: 3c:a9:f4:0b:91:70 Ignoring invalid EAPOL version (1) in EAPOL-key message from mobile 3c:a9:f4:0b:91:70
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.568: 3c:a9:f4:0b:91:70 Received EAPOL-key in PTK_START state (message 2) from mobile 3c:a9:f4:0b:91:70
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.568: 3c:a9:f4:0b:91:70 Stopping retransmission timer for mobile 3c:a9:f4:0b:91:70
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.568: 3c:a9:f4:0b:91:70 EAPOL Header:
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.568: 00000000: 02 03 5f 00 .._.
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.568: 3c:a9:f4:0b:91:70 Sending EAPOL-Key Message to mobile 3c:a9:f4:0b:91:70
state PTKINITNEGOTIATING (message 3), replay counter 00.00.00.00.00.00.00.01
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.568: 3c:a9:f4:0b:91:70 Sending EAPOL-Key Message to mobile 3c:a9:f4:0b:91:70
state PTKINITNEGOTIATING (message 3), replay counter 00.00.00.00.00.00.00.01
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.568: 3c:a9:f4:0b:91:70 Reusing allocated memory for EAP Pkt for retransmission to mobile 3c:a9:f4:0b:91:70
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.568: 3c:a9:f4:0b:91:70 mscb->apfMsLwappLradNhMac = 00:0c:29:e4:e9:6a mscb->apfMsLradSlotId = 0 mscb->apfMsLradJumbo = 0 mscb->apfMsintIfNum = 1
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.568: 3c:a9:f4:0b:91:70 mscb->apfMsBssid = 00:26:cb:4c:89:d0 mscb->apfMsAddress = 3c:a9:f4:0b:91:70 mscb->apfMsApVapId = 2
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.568: 3c:a9:f4:0b:91:70 dot1xcb->snapOrg = 00 00 00 dot1xcb->eapolWepBit = 0 mscb->apfMsLwappLradVlanId = 10 mscb->apfMsLwappMwarInet.ipv4.addr = 168430130
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.568: 3c:a9:f4:0b:91:70 mscb->apfMsLwappMwarPort = 5246 mscb->apfMsLwappLradInet.ipv4.addr = 168427904 mscb->apfMsLwappLradPort = 41879
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.569: 3c:a9:f4:0b:91:70 Received EAPOL-Key from mobile 3c:a9:f4:0b:91:70
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.569: 3c:a9:f4:0b:91:70 Ignoring invalid EAPOL version (1) in EAPOL-key message from mobile 3c:a9:f4:0b:91:70
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.569: 3c:a9:f4:0b:91:70 Received EAPOL-key in PTKINITNEGOTIATING state (message 4) from mobile 3c:a9:f4:0b:91:70
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.569: 3c:a9:f4:0b:91:70 Stopping retransmission timer for mobile 3c:a9:f4:0b:91:70
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.569: 3c:a9:f4:0b:91:70 Freeing EAP Retransmit Bufer for mobile 3c:a9:f4:0b:91:70
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.569: 3c:a9:f4:0b:91:70 apfMs1xStateInc
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.569: 3c:a9:f4:0b:91:70 10.10.1.130 8021X_REQD (3) Change state to L2AUTHCOMPLETE (4) last state 8021X_REQD (3)
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.569: 3c:a9:f4:0b:91:70 Central switch is FALSE
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.569: 3c:a9:f4:0b:91:70 Sending the Central Auth Info
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.569: 3c:a9:f4:0b:91:70 Central Auth Info Allocated PMKLen = 32
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.569: EapolReplayCounter: 00 00 00 00 00 00 00 01
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.569: EapolReplayCounter: 00 00 00 00 00 00 00 01
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.569: 3c:a9:f4:0b:91:70 PMK: pmkActiveIndex = 0
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.569: 3c:a9:f4:0b:91:70 EapolReplayCounter: 00 00 00 00 00 00 00 01
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.569: 3c:a9:f4:0b:91:70 msAssocTypeFlagsMsb = 0 msAssocTypeFlagsLsb = 2
apfMsEntryType = 0 apfMsEapType = 0
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.569: 3c:a9:f4:0b:91:70 Sending Local Switch flag = 1
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.569: 3c:a9:f4:0b:91:70 10.10.1.130 L2AUTHCOMPLETE (4) DHCP Not required on AP 00:26:cb:4c:89:d0 vapId 2 apVapId 2for this client
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.569: 3c:a9:f4:0b:91:70 Not Using WMM Compliance code qosCap 00
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.569: 3c:a9:f4:0b:91:70 10.10.1.130 L2AUTHCOMPLETE (4) Plumbed mobile LWAPP rule on AP 00:26:cb:4c:89:d0 vapId 2 apVapId 2 flex-acl-name:
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.569: 3c:a9:f4:0b:91:70 10.10.1.130 L2AUTHCOMPLETE (4) Change state to WEBAUTH_REQD (8) last state L2AUTHCOMPLETE (4)
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.569: 3c:a9:f4:0b:91:70 10.10.1.130 WEBAUTH_REQD (8) pemAdvanceState2 6236, Adding TMP rule
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.569: 3c:a9:f4:0b:91:70 10.10.1.130 WEBAUTH_REQD (8) Adding Fast Path rule
type = Airespace AP Client - ACL passthru
on AP 00:26:cb:4c:89:d0, slot 0, interface = 1, QOS = 0
IPv4 ACL ID
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.569: 3c:a9:f4:0b:91:70 10.10.1.130 WEBAUTH_REQD (8) Fast Path rule (contd...) 802.1P = 2, DSCP = 0, TokenID = 64206 Local Bridging Vlan = 10, Local Bridging intf id = 0
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.569: 3c:a9:f4:0b:91:70 10.10.1.130 WEBAUTH_REQD (8) Successfully plumbed mobile rule (IPv4 ACL ID 255, IPv6 ACL ID 255, L2 ACL ID 255)
*spamApTask7: Feb 04 07:48:10.569: 3c:a9:f4:0b:91:70 spamEncodeCentralAuthInoMsPayload: msAssocTypeFlagsMsb = 0 msAssocTypeFlagsLsb = 2
apfMsEntryType = 0 pmkLen = 32
*pemReceiveTask: Feb 04 07:48:10.570: 3c:a9:f4:0b:91:70 10.10.1.130 Added NPU entry of type 2, dtlFlags 0x0
*pemReceiveTask: Feb 04 07:48:10.570: 3c:a9:f4:0b:91:70 Pushing IPv6: fe80:0000:0000:0000:c915:4a8e:6d1a:e20d , and MAC: 3C:A9:F4:0B:91:70 , Binding to Data Plane. SUCCESS !!
*DHCP Socket Task: Feb 04 07:48:10.589: 3c:a9:f4:0b:91:70 DHCP received op BOOTREPLY (2) (len 308,vlan 10, port 1, encap 0xec03)
*DHCP Socket Task: Feb 04 07:48:10.589: 3c:a9:f4:0b:91:70 DHCP processing DHCP ACK (5)
*DHCP Socket Task: Feb 04 07:48:10.589: 3c:a9:f4:0b:91:70 DHCP op: BOOTREPLY, htype: Ethernet, hlen: 6, hops: 0
*DHCP Socket Task: Feb 04 07:48:10.589: 3c:a9:f4:0b:91:70 DHCP xid: 0xcce207f6 (3437365238), secs: 0, flags: 0
*DHCP Socket Task: Feb 04 07:48:10.589: 3c:a9:f4:0b:91:70 DHCP chaddr: 3c:a9:f4:0b:91:70
*DHCP Socket Task: Feb 04 07:48:10.589: 3c:a9:f4:0b:91:70 DHCP ciaddr: 0.0.0.0, yiaddr: 10.10.1.130
*DHCP Socket Task: Feb 04 07:48:10.589: 3c:a9:f4:0b:91:70 DHCP siaddr: 0.0.0.0, giaddr: 0.0.0.0
*DHCP Socket Task: Feb 04 07:48:10.589: 3c:a9:f4:0b:91:70 DHCP server id: 10.10.1.20 rcvd server id: 10.10.1.20
*SNMPTask: Feb 04 07:48:16.594: 3c:a9:f4:0b:91:70 Central Switch = FALSE
*SNMPTask: Feb 04 07:48:16.594: 3c:a9:f4:0b:91:70 Central Switch = FALSE
*SNMPTask: Feb 04 07:48:16.595: 3c:a9:f4:0b:91:70 Central Switch = FALSE
*SNMPTask: Feb 04 07:48:16.595: 3c:a9:f4:0b:91:70 Central Switch = FALSE
*ewmwebWebauth1: Feb 04 07:48:31.129: 3c:a9:f4:0b:91:70 Username entry (local1) created for mobile, length = 6
*ewmwebWebauth1: Feb 04 07:48:31.130: 3c:a9:f4:0b:91:70 Username entry (local1) created in mscb for mobile, length = 6
*ewmwebWebauth1: Feb 04 07:48:31.130: 3c:a9:f4:0b:91:70 10.10.1.130 WEBAUTH_REQD (8) Change state to WEBAUTH_NOL3SEC (14) last state WEBAUTH_REQD (8)
*ewmwebWebauth1: Feb 04 07:48:31.130: 3c:a9:f4:0b:91:70 apfMsRunStateInc
*ewmwebWebauth1: Feb 04 07:48:31.130: 3c:a9:f4:0b:91:70 10.10.1.130 WEBAUTH_NOL3SEC (14) Change state to RUN (20) last state WEBAUTH_NOL3SEC (14)
*ewmwebWebauth1: Feb 04 07:48:31.130: 3c:a9:f4:0b:91:70 Session Timeout is 65535 - starting session timer for the mobile
*ewmwebWebauth1: Feb 04 07:48:31.130: 3c:a9:f4:0b:91:70 10.10.1.130 RUN (20) Reached PLUMBFASTPATH: from line 6571
*ewmwebWebauth1: Feb 04 07:48:31.131: 3c:a9:f4:0b:91:70 10.10.1.130 RUN (20) Replacing Fast Path rule
type = Airespace AP Client
on AP 00:26:cb:4c:89:d0, slot 0, interface = 1, QOS = 0
IPv4 ACL ID = 255, IPv6 ACL ID =
*ewmwebWebauth1: Feb 04 07:48:31.131: 3c:a9:f4:0b:91:70 10.10.1.130 RUN (20) Fast Path rule (contd...) 802.1P = 2, DSCP = 0, TokenID = 64206 Local Bridging Vlan = 10, Local Bridging intf id = 0
*ewmwebWebauth1: Feb 04 07:48:31.131: 3c:a9:f4:0b:91:70 10.10.1.130 RUN (20) Successfully plumbed mobile rule (IPv4 ACL ID 255, IPv6 ACL ID 255, L2 ACL ID 255)
*pemReceiveTask: Feb 04 07:48:31.132: 3c:a9:f4:0b:91:70 10.10.1.130 Added NPU entry of type 1, dtlFlags 0x0
(Cisco Controller) >
(Cisco Controller) >
(Cisco Controller) >
(Cisco Controller) >
(Cisco Controller) >
(Cisco Controller) >
(Cisco Controller) >
(Cisco Controller) >
(Cisco Controller) >*pemReceiveTask: Feb 04 07:48:31.132: 3c:a9:f4:0b:91:70 Pushing IPv6: fe80:0000:0000:0000:c915:4a8e:6d1a:e20d , and MAC: 3C:A9:F4:0B:91:70 , Binding to Data Plane. SUCCESS !!
*emWeb: Feb 04 07:49:14.120: 3c:a9:f4:0b:91:70 Central Switch = FALSE
*emWeb: Feb 04 07:49:14.120: 3c:a9:f4:0b:91:70 Central Switch = FALSE
*emWeb: Feb 04 07:49:14.120: 3c:a9:f4:0b:91:70 Central Switch = FALSE
*SNMPTask: Feb 04 07:51:19.646: 3c:a9:f4:0b:91:70 Central Switch = FALSE
*SNMPTask: Feb 04 07:51:19.646: 3c:a9:f4:0b:91:70 Central Switch = FALSE
*SNMPTask: Feb 04 07:51:19.662: 3c:a9:f4:0b:91:70 Central Switch = FALSE
*SNMPTask: Feb 04 07:51:19.662: 3c:a9:f4:0b:91:70 Central Switch = FALSE
*SNMPTask: Feb 04 07:51:19.663: 3c:a9:f4:0b:91:70 Central Switch = FALSE
*SNMPTask: Feb 04 07:51:19.663: 3c:a9:f4:0b:91:70 Central Switch = FALSE
*IPv6_Msg_Task: Feb 04 07:53:35.661: 3c:a9:f4:0b:91:70 Link Local address fe80::c915:4a8e:6d1a:e20d updated to mscb. Not Advancing pem state.Current state: mscb in apfMsMmInitial mobility state and client state APF_MS_STATE_A
*dot1xMsgTask: Feb 04 07:54:26.664: GTK Rotation Kicked in for AP: 00:26:cb:4c:89:d0 SlotId = 1 - (0x47440ef0)
*dot1xMsgTask: Feb 04 07:54:26.665: Generated a new group key for AP 00:26:cb:4c:89:d0(1) - vap 1
*dot1xMsgTask: Feb 04 07:54:26.665: Sending of M5 for 00:26:cb:4c:89:d0 is Skipped, rc = 1
*dot1xMsgTask: Feb 04 07:54:26.665: Generated a new group key for AP 00:26:cb:4c:89:d0(1) - vap 2
*dot1xMsgTask: Feb 04 07:54:26.665: Sending of M5 for 00:26:cb:4c:89:d0 is Skipped, rc = 1
*SNMPTask: Feb 04 07:56:19.689: 3c:a9:f4:0b:91:70 Central Switch = FALSE
*SNMPTask: Feb 04 07:56:19.689: 3c:a9:f4:0b:91:70 Central Switch = FALSE
*SNMPTask: Feb 04 08:01:19.730: 3c:a9:f4:0b:91:70 Central Switch = FALSE
*SNMPTask: Feb 04 08:01:19.730: 3c:a9:f4:0b:91:70 Central Switch = FALSE
*dot1xMsgTask: Feb 04 08:01:23.904: GTK Rotation Kicked in for AP: 00:26:cb:4c:89:d0 SlotId = 0 - (0x47440ef0)
*dot1xMsgTask: Feb 04 08:01:23.904: Generated a new group key for AP 00:26:cb:4c:89:d0(0) - vap 1
*dot1xMsgTask: Feb 04 08:01:23.905: Sending of M5 for 00:26:cb:4c:89:d0 is Skipped, rc = 1
*dot1xMsgTask: Feb 04 08:01:23.905: Generated a new group key for AP 00:26:cb:4c:89:d0(0) - vap 2
*dot1xMsgTask: Feb 04 08:01:23.905: GTK rotation for 3c:a9:f4:0b:91:70
*dot1xMsgTask: Feb 04 08:01:23.905: 3c:a9:f4:0b:91:70 EAPOL Header:
*dot1xMsgTask: Feb 04 08:01:23.905: 00000000: 02 03 5f 00 .._.
*dot1xMsgTask: Feb 04 08:01:23.905: 3c:a9:f4:0b:91:70 Key exchange done, data packets from mobile 3c:a9:f4:0b:91:70 should be forwarded shortly
*dot1xMsgTask: Feb 04 08:01:23.905: 3c:a9:f4:0b:91:70 Key exchange done, data packets from mobile 3c:a9:f4:0b:91:70 should be forwarded shortly
*dot1xMsgTask: Feb 04 08:01:23.906: Confirmation Key: (16)
*dot1xMsgTask: Feb 04 08:01:23.906: [0000] fa a3 68 28 46 1f 49 18 a0 60 7a 92 c4 f5 64 3d
*dot1xMsgTask: Feb 04 08:01:23.906: 3c:a9:f4:0b:91:70 Sending EAPOL-Key Message to mobile 3c:a9:f4:0b:91:70
state PTKINITDONE (message 5 - group), replay counter 00.00.00.00.00.00.00.02
*dot1xMsgTask: Feb 04 08:01:23.906: 3c:a9:f4:0b:91:70 Sending EAPOL-Key Message to mobile 3c:a9:f4:0b:91:70
state PTKINITDONE (message 5 - group), replay counter 00.00.00.00.00.00.00.02
*dot1xMsgTask: Feb 04 08:01:23.906: 3c:a9:f4:0b:91:70 Allocating EAP Pkt for retransmission to mobile 3c:a9:f4:0b:91:70
*dot1xMsgTask: Feb 04 08:01:23.906: 3c:a9:f4:0b:91:70 mscb->apfMsLwappLradNhMac = 00:0c:29:e4:e9:6a mscb->apfMsLradSlotId = 0 mscb->apfMsLradJumbo = 0 mscb->apfMsintIfNum = 1
*dot1xMsgTask: Feb 04 08:01:23.906: 3c:a9:f4:0b:91:70 mscb->apfMsBssid = 00:26:cb:4c:89:d0 mscb->apfMsAddress = 3c:a9:f4:0b:91:70 mscb->apfMsApVapId = 2
*dot1xMsgTask: Feb 04 08:01:23.907: 3c:a9:f4:0b:91:70 dot1xcb->snapOrg = 00 00 00 dot1xcb->eapolWepBit = 1 mscb->apfMsLwappLradVlanId = 10 mscb->apfMsLwappMwarInet.ipv4.addr = 168430130
*dot1xMsgTask: Feb 04 08:01:23.907: 3c:a9:f4:0b:91:70 mscb->apfMsLwappMwarPort = 5246 mscb->apfMsLwappLradInet.ipv4.addr = 168427904 mscb->apfMsLwappLradPort = 41879
*dot1xMsgTask: Feb 04 08:01:23.907: 3c:a9:f4:0b:91:70 Updated broadcast key sent to mobile 3C:A9:F4:0B:91:70
*dot1xMsgTask: Feb 04 08:01:23.907: 3c:a9:f4:0b:91:70 Updated broadcast key sent to mobile 3C:A9:F4:0B:91:70
*dot1xMsgTask: Feb 04 08:01:23.907: Sending of M5 for 00:26:cb:4c:89:d0 is Skipped, rc = 1
*osapiBsnTimer: Feb 04 08:01:25.104: 3c:a9:f4:0b:91:70 802.1x 'timeoutEvt' Timer expired for station 3c:a9:f4:0b:91:70 and for message = M5
*dot1xMsgTask: Feb 04 08:01:25.104: 3c:a9:f4:0b:91:70 Retransmit 1 of EAPOL-Key M5 (length 131) for mobile 3c:a9:f4:0b:91:70
*dot1xMsgTask: Feb 04 08:01:25.104: 3c:a9:f4:0b:91:70 mscb->apfMsLwappLradNhMac = 00:0c:29:e4:e9:6a mscb->apfMsLradSlotId = 0 mscb->apfMsLradJumbo = 0 mscb->apfMsintIfNum = 1
*dot1xMsgTask: Feb 04 08:01:25.104: 3c:a9:f4:0b:91:70 mscb->apfMsBssid = 00:26:cb:4c:89:d0 mscb->apfMsAddress = 3c:a9:f4:0b:91:70 mscb->apfMsApVapId = 2
*dot1xMsgTask: Feb 04 08:01:25.104: 3c:a9:f4:0b:91:70 dot1xcb->snapOrg = 00 00 00 dot1xcb->eapolWepBit = 1 mscb->apfMsLwappLradVlanId = 10 mscb->apfMsLwappMwarInet.ipv4.addr = 168430130
*dot1xMsgTask: Feb 04 08:01:25.104: 3c:a9:f4:0b:91:70 mscb->apfMsLwappMwarPort = 5246 mscb->apfMsLwappLradInet.ipv4.addr = 168427904 mscb->apfMsLwappLradPort = 41879
*osapiBsnTimer: Feb 04 08:01:26.104: 3c:a9:f4:0b:91:70 802.1x 'timeoutEvt' Timer expired for station 3c:a9:f4:0b:91:70 and for message = M5
*dot1xMsgTask: Feb 04 08:01:26.104: 3c:a9:f4:0b:91:70 Retransmit 2 of EAPOL-Key M5 (length 131) for mobile 3c:a9:f4:0b:91:70
*dot1xMsgTask: Feb 04 08:01:26.104: 3c:a9:f4:0b:91:70 mscb->apfMsLwappLradNhMac = 00:0c:29:e4:e9:6a mscb->apfMsLradSlotId = 0 mscb->apfMsLradJumbo = 0 mscb->apfMsintIfNum = 1
*dot1xMsgTask: Feb 04 08:01:26.104: 3c:a9:f4:0b:91:70 mscb->apfMsBssid = 00:26:cb:4c:89:d0 mscb->apfMsAddress = 3c:a9:f4:0b:91:70 mscb->apfMsApVapId = 2
*dot1xMsgTask: Feb 04 08:01:26.104: 3c:a9:f4:0b:91:70 dot1xcb->snapOrg = 00 00 00 dot1xcb->eapolWepBit = 1 mscb->apfMsLwappLradVlanId = 10 mscb->apfMsLwappMwarInet.ipv4.addr = 168430130
*dot1xMsgTask: Feb 04 08:01:26.104: 3c:a9:f4:0b:91:70 mscb->apfMsLwappMwarPort = 5246 mscb->apfMsLwappLradInet.ipv4.addr = 168427904 mscb->apfMsLwappLradPort = 41879
*osapiBsnTimer: Feb 04 08:01:27.104: 3c:a9:f4:0b:91:70 802.1x 'timeoutEvt' Timer expired for station 3c:a9:f4:0b:91:70 and for message = M5
*dot1xMsgTask: Feb 04 08:01:27.104: 3c:a9:f4:0b:91:70 Retransmit failure for EAPOL-Key M5 to mobile 3c:a9:f4:0b:91:70, retransmit count 3, mscb deauth count 0
*dot1xMsgTask: Feb 04 08:01:27.104: 3c:a9:f4:0b:91:70 Resetting MSCB PMK Cache Entry 0 for station 3c:a9:f4:0b:91:70
*dot1xMsgTask: Feb 04 08:01:27.105: 3c:a9:f4:0b:91:70 Removing BSSID 00:26:cb:4c:89:d1 from PMKID cache of station 3c:a9:f4:0b:91:70
*dot1xMsgTask: Feb 04 08:01:27.105: 3c:a9:f4:0b:91:70 Setting active key cache index 0 ---> 8
*dot1xMsgTask: Feb 04 08:01:27.105: 3c:a9:f4:0b:91:70 Sent Deauthenticate to mobile on BSSID 00:26:cb:4c:89:d0 slot 0(caller 1x_ptsm.c:598)
*dot1xMsgTask: Feb 04 08:01:27.105: 3c:a9:f4:0b:91:70 Setting active key cache index 8 ---> 8
*dot1xMsgTask: Feb 04 08:01:27.105: 3c:a9:f4:0b:91:70 Deleting the PMK cache when de-authenticating the client.
*dot1xMsgTask: Feb 04 08:01:27.105: 3c:a9:f4:0b:91:70 Global PMK Cache deletion failed.
*dot1xMsgTask: Feb 04 08:01:27.106: 3c:a9:f4:0b:91:70 Scheduling deletion of Mobile Station: (callerId: 57) in 10 seconds
*dot1xMsgTask: Feb 04 08:01:27.106: 3c:a9:f4:0b:91:70 Freeing EAP Retransmit Bufer for mobile 3c:a9:f4:0b:91:70
*osapiBsnTimer: Feb 04 08:01:37.105: 3c:a9:f4:0b:91:70 apfMsExpireCallback (apf_ms.c:626) Expiring Mobile!
*apfReceiveTask: Feb 04 08:01:37.105: 3c:a9:f4:0b:91:70 apfMsExpireMobileStation (apf_ms.c:6655) Changing state for mobile 3c:a9:f4:0b:91:70 on AP 00:26:cb:4c:89:d0 from Associated to Disassociated
*apfReceiveTask: Feb 04 08:01:37.105: 3c:a9:f4:0b:91:70 Scheduling deletion of Mobile Station: (callerId: 45) in 10 seconds
*osapiBsnTimer: Feb 04 08:01:47.105: 3c:a9:f4:0b:91:70 apfMsExpireCallback (apf_ms.c:626) Expiring Mobile!
*apfReceiveTask: Feb 04 08:01:47.106: 3c:a9:f4:0b:91:70 Sent Deauthenticate to mobile on BSSID 00:26:cb:4c:89:d0 slot 0(caller apf_ms.c:6749)
*apfReceiveTask: Feb 04 08:01:47.106: 3c:a9:f4:0b:91:70 Setting active key cache index 8 ---> 8
*apfReceiveTask: Feb 04 08:01:47.106: 3c:a9:f4:0b:91:70 Deleting the PMK cache when de-authenticating the client.
*apfReceiveTask: Feb 04 08:01:47.106: 3c:a9:f4:0b:91:70 Global PMK Cache deletion failed.
*apfReceiveTask: Feb 04 08:01:47.106: 3c:a9:f4:0b:91:70 apfMsAssoStateDec
*apfReceiveTask: Feb 04 08:01:47.106: 3c:a9:f4:0b:91:70 apfMsExpireMobileStation (apf_ms.c:6787) Changing state for mobile 3c:a9:f4:0b:91:70 on AP 00:26:cb:4c:89:d0 from Disassociated to Idle
*apfReceiveTask: Feb 04 08:01:47.106: 3c:a9:f4:0b:91:70 Scheduling deletion of Mobile Station: (callerId: 47) in 10 seconds
*osapiBsnTimer: Feb 04 08:01:57.106: 3c:a9:f4:0b:91:70 apfMsExpireCallback (apf_ms.c:626) Expiring Mobile!
*apfReceiveTask: Feb 04 08:01:57.106: 3c:a9:f4:0b:91:70 pemApfDeleteMobileStation2: APF_MS_PEM_WAIT_L2_AUTH_COMPLETE = 0.
*apfReceiveTask: Feb 04 08:01:57.106: 3c:a9:f4:0b:91:70 10.10.1.130 START (0) Deleted mobile LWAPP rule on AP [00:26:cb:4c:89:d0]
*apfReceiveTask: Feb 04 08:01:57.106: 3c:a9:f4:0b:91:70 Username entry deleted for mobile
*apfReceiveTask: Feb 04 08:01:57.106: 3c:a9:f4:0b:91:70 Deleting mobile on AP 00:26:cb:4c:89:d0(0)
If Layer-2 Auth (PSK) is set to "none" and only Layer-3 Web Auth is kept, then there are no issues. PC can wake up before 8 hours and not prompted for Web Auth again. As a test, I setup the WLAN with Layer-2 PSK auth only with Layer-3 auth set to none. The WLC removed the client entry after 25 minutes. Not an issue for PSK based auth only as PC on wake up seamlessly gets associated to WLAN.
Is User Idle Timeout setting not valid when WPA2-PSK is used as the auth method ?
Thanks,
Rick.Thanks Scott, The code version is 7.6.130.0 which supports Sleeping Client feature. However, as per the docu "http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-6/configuration-guide/b_cg76/b_cg76_chapter_010111.html#reference_7008E6F7D7094BA7AD39491D7361622D"
The authentication of sleeping clients feature is not supported with Layer 2 security and web authentication enabled.
and as you mentioned as well
...Sleeping client like George mentioned is a better way than adjusting the idle timer but strictly for layer 3 only...
Sleeping Client wasn't an option in my case. That is why I was hoping that Idle Timeout may do the trick here. This is an actual case where a client with an existing wireless network just wanted to enable sleeping client feature so that their guests don't need to re-auth if their device sleeps or they go out (break) and come back after some time. Layer-3 Web Auth alone should be enough I think. Keeping L2-PSK is probably their security team's decision, as they also use the same SSID for BYOD devices and don't want nearby people/buildings to see that there is an Open Wifi available and on joining would see the Web Auth portal and company disclaimer.
George, I agree with Dot1X method. It can be used for the BYOD devices (separate SSID) while we can keep the Guest WLAN as L3-WebAuth only on controller (or do CWA through ISE if available).
Thanks for all your help.
Rick.
Maybe you are looking for
-
Tables / Procedures not shown in SQL Developer.
Hi, I recently downloaded SQL developer 1.5 and installed it. The created few connections to the various environments I use. Though this version does not work with 8i it works with 10g The problem I' facing is that, under connections- the tables, pro
-
HT1420 i cant get downloaded songs i puechased to go to my ipod
i cant get songs i purchased to go to my ipod
-
Regarding user exit for me32l - Scheduling agreement
hi, i am using the exit ZXM06U44 for both purchase order and scheduling agreement, but the thing is for purchase order the function module EXIT_SAPMM06E_006 is been triggerin for exproting and importing of the memory if of transaction type, know i
-
Trackpad seems to 'twitch' or stop working when I'm on youtube...
I have a Macbook 2009 unibody that I got in 2009. Whenever I go on a video site like youtube, or my fave thatguywiththeglasses.com, the trackpad either starts twitching or stop working all together, just randomly closing or making windows bigger. I u
-
Multiple Listeners - Multiple Event Handlers
According to the tutorial, event handling code executes in a single event dispatching thread to ensure that each event handler finishes execution before the next executes. I'm also aware that I can add multiple action listeners to a single component,