Which idoc type allows to send plant/sloc info to external system?LOISM001?

Dear EDI Experts,
we are looking for a solution for the following issue:
An external system (Mobile solution) shall get plant/stock info from SAP ERP.
Process:
1.Plant/Slocation is NOT empty, e.g. Material 1100 -> 100 PC
2. Stock is posted to Pant/Sloc, e.g. Material 1110 -> 50 PC + Mat. 1200 -> 80 PC
For the stock movement idocs can be generated BUT we need ALL stock of Plant/Sloc in idoc
-> 100 PC of 1100
->  50 PC of 1110
-> 80 PC of 1200
As far as I know NO standard IDOC type exists which offers to transfer such info.
I came across the LOISM001 (to be triggered via transaction POIT) idoc which may meet the requirments. BUT it creates an idoc per material.
Questions:
1. LOISM001: Is there any chance to combine all materials of a plant/storage location to ONE idoc?
2. Any other idoc type suitable and how to trigger automatically?
Many thanks
Regards
JW
Edited by: Jens Wolf  on Jul 1, 2008 3:34 PM

Hi !
You may check out the PROACT01.
It's designed to transmit stock data.
Hope that helped a bit.
Rainer

Similar Messages

  • Which Idoc type for Quality release process and Inventory reconciliation/adj. with 3PL

    Dear experts,
    could you please provide your suggestion on which Idoc type to use for following two scenarios between Client and 3PL vendor (Logistic provider):
    1st scenario:
    - Products are released in QM in clients SAP. As a result of this action stock status is changed. This information should be sent to 3PL vendor. 3PL vendor receives the information, changes the inventory status in its system and sends confirmation back to the client. Is there any Idoc type that can be used?
    2nd scenario:
    - 3PL vendor sends stock reconciliation static report to the client. Client receives the report and compares it with own report. Exceptions are reviewed and adjusted upon agreement between Client and 3PL. Once 3PL adjusts the stock, this information is received in Client system and processed subsequently. Any suggestions for an Idoc with Stock reconciliation report and also for stock adjustments?
    Many thanks for each idea to everyone in advance.

    Hi Ramesh,
    thank you for this idea. Unfortunately it seems not be applicable for our system as it is ECC 5.0 and INVRPT Idoc type I can only find in ECC 6.0.
    Do you have any other idea or we have to build a new custom Idoc type?

  • Which IDoc Type and Message Type to use for Credit Memo?

    Could you guys please tell me which IDoc type and Message Type to use for Credit Memo? Also if possible tell me the process code/ function module.
    Will certainly give points for right answer. Thank you for reading.

    Hi,
    You can use IDoc type FIDCCP02 with message type FIDCC1/FIDCC2 for Credit Memo.
    Also you can use this FM FI_IDOC_CREATE_FIDCC1/
    FI_IDOC_CREATE_FIDCC2 to generate the IDoc.
    Regards,
    Ferry Lianto

  • For Inventory Adjustment : Which Idoc type to be used and why?

    Hi Gurus,
    For Goods Movement in one of the MM-Purch Implementation I used the Idoc type : MBGMCR03
    at that time inventaory was not playing a big role.
    But for now for doing inventory adjustment (Inventory has importance now) which Idoc type to be followed:
    Can I use same Idoc type : MBGMCR03
    Or Shd I go for Idoc type  : WMMBID02
    In some threads I read if MM you shd. go for MBGMCR03 and for IM : WMMBID02.
    But why I dont know the answer...
    Please give me your views on this.
    Thanks
    Amresh

    MBGMCR03  is basically the BDBG idoc type and uses BAPI_GOODSMVT_CREATE to post the goods movement... You can check the documentation for the FM /BAPI  to determine what kind of goods movement is possible. You can look at T158G table to find the t-codes supported. If you can post your inventory adjustment using the BAPI, you can use MBGMCR03, as long as middle ware can support that format...
    As far as the WMMBID02, It uses the IDOC FM (which in turn also uses the MB_CREATE_GOODS_MOVEMENT)..

  • Which IDOC-type to manipulate the status of other IDOC?

    Hi everybody,
    which IDOC-type should be used to modify the status of another IDOC?
    Thanks, regards
    mario

    STATUS message type in SYSTAT01 idoc type.
    TABNAM     EDI_DS40
    MANDT     010
    DOCNUM     0000000026606468
    LOGDAT     20070530
    LOGTIM     015642
    STATUS     24
    UNAME     EDIUSER
    REPID     GENTRAN
    STACOD     24     Status code
    STATXT     Trading Partner Found     Text for status code
    STATYP     I  : Information     Type of system error message (A, W, E, S, I)

  • Send HU structure to an external system through an idoc

    Hi,
    I need to send the description of an HU (Sub HUs and materials to an external system).
    Do you know if there is any standard idoc type allowing to do that.
    I tried to use idoc HU_CREATE or HU_PROCESSOUTPUTDIRECT but I think none of them will allow me to do that because there is no function module in outbound mode that I can use with them/
    Any ideas?
    Thanks in advance.
    Regards

    Hi,
    In order to send data to external system and if you have an middleware used in your landscape then
    create logical system for that system and associate the port with RFC destination (based on middleware used type 3 ot type t) can be used and idoc can be sent to middleware and middleware can take care of sending the data to the external system by converting it into required  format..
    These are normal scenarios for which Middlewares are used for integration..
    HTH
    Rajesh

  • Incorrect IDoc type ZSBB010 in the ALE defintion of the source system.

    Hi,
    We have done client copy of BW production system into BW test system.
    I am getting following error while checking Test R/3 system in BW Administrator workbench.
    Diagnosis
    Incorrect IDoc type ZSBB010 in the ALE defintion of the source system.
    System response
    Error when sending data to BW.
    Procedure
    Enter IDoc type ZSBB017 .
    Ring any bell.. Thank you for Ur time..
    Cheers
    Senthil

    Hello Senthil,
    Please check WE20 transaction and look for idoc type there.Most likely you need to make some corrections in there.  Also check BD64.
    Regards.
    Ruchit.

  • Incorrect Idoc type ZSPA065 in the ALE definition of the source system RSAR

    Hi Experts,
    Incorrect Idoc type ZSPA065 in the ALE definition of the source system RSAR 373 error is coming .
    Some one suggested note no 886102  but i went inside i did not find correction or code for implementing please any body suggeste for rectifying this error.
    Please tell correct aproach for solving the issue.

    Hi,
    there is some problem with your RFC connection
    just go to WE20 T code and expand partner type LS
    here search your r/3 system and click on that here you can find the details of idoc
    if you are not able to correct yourself you can contact basis team for that.
    just go to RSA1--> using the conxt menu doa check of Source system you will get the error message
    just send the screen shot of the same to Basis team they will take care of the same.
    Br
    santosh

  • Incorrect IDoc type ZSWA003 in the ALE defintion of the source system.

    Hi !
    When I triggering the load from BW it is giving me an error Incorrect IDoc type ZSWA003 in the ALE defintion of the source system.
    When I am checking the connection in source system with R3 system , it is giving me this error and asked me to Enter IDoc type ZSWA011 .
    Please tell me how to do this.

    Hi,
    I assume that the source system has been copied fom production onto quality-system (or somothin likely).
    To solve that, plase refer to the oss-note 886102.
    https://websmp130.sap-ag.de/sap(bD1kZSZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=886102
    https://service.sap.com/sap/support/notes/886102
    Hope that helps.
    cheers
    Sven
    Edited by: Sven Muntermann on Mar 26, 2009 6:21 PM

  • Incorrect IDoc type ZSBC052 in the ALE definition of the source system

    hi guyz,
    i am getting the following error while checking the source system in bi.
    Incorrect IDoc type ZSBC052 in the ALE definition of the source system     RSAR     373     
    please guide through your expertise.
    regards,
    raps.

    Hi,
    Check the below given thread,
    [Source System Check Problem;
    [Incorrect Idoc type ZSPA065 in the ALE definition of the source system RSAR;
    Regards,
    Durgesh.

  • RFC Error:The BW IDoc type ZSBA011 is not the same as the source system

    Hi Experts,
    RSA1Source System (Context Menu) Check
    I am getting the below error
    <b>‘The BW IDoc type ZSBA011 is not the same as the source system  IDoc type ZSBD012 ‘              </b>                              
    What might happened wrong.When i checked with my Basis Consultant who is new to job,Replied every this is ok with regeards to RFC.
    Where should i check to correct the error
    Thanks

    Hi,
    Did you do a system copy for BW ?
    Try a restore (rightclick on your source system) in most cases this will solve the problem.
    If not check the notes below:
    184322  Procedure after DB copy of BW source systems 
    886102      System Landscape Copy for SAP BW 2.X, 3.X and NW2004s BI
    325470      Activities after client copy in BW source systems
    325525      Copying and renaming systems in a BW environment
    184754      Procedure after BW database copy
    184447      Building a BW-system landscape
    184971      Notes on BW source system connections
    140276      Error in source system assignment
    524554      Storing destinations in the BW environment
    538052  Maintenance of Myself destination in BW
    Regards, Patrick Rieken
    Message was edited by:
            Patrick Rieken - BI-Formance B.V.

  • Send R/3 data to external system

    Hi Guru's,
    how to send R/3 data to external system (Oracle databse).
    thanks in advance.
    Ramu.

    Refer to this link
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0cc5049-5837-2b10-8ca5-f0e948762522
    it is a very good document on IDOCs
    or you may search for this in
    sapbrain.com or
    thespot4sap
    or even within SDN you may search for IDOCs you will get lots of info
    Regards,
    Anil

  • Which iDOC Type for Credit/Debit notes generated from SD Module ?

    Hi,
    We are implementing an EDI Solution for SD Invoices which would involve sending EDIFACT Messages generated out of mapping the SAP iDOC TYPE INVOIC02 to the EDIFACT fields.
    We also have to send Credit and Debit Notes generated from SAP in the SD Module in the same path. We are currently planning on using INVOIC02 for doing this.
    My Question: Is this the proper approach ? We don't want to use the Credit / Debit advises in FI-GL to post to Credits to Customer Account.
    Is there any other iDOC Type or message type that we should be using for SD Credit/Debit Notes ?

    Hi Mahesh,
    Thank you for your help.
    In my client location data is posted non-sap to sap through SAP XI/PI.
    so i need to tell the xi guy to which IDOC is used for this interface and technical names.
    Can you help me.

  • Which IDoc type is related to material stock data?

    I didn't find any IDoc type existing which is related to stock overview (MMBE), just find message type LOISTD.
    Anyone can help please?

    Hi
    LOISTD01 -  Master requirements/stock list
    This is the IDoc Type

  • Send production order changes to external system IDOC

    Hi,
    I need to send production order changes to an an external system. I understand that I can trigger idocs using t-code POIT.
    but my requirement is when a order is changed, i want to trigger an IDOC to external system with the new PO data...how can I achieve this

    Hi Swathi,
    A very high level idea.
    You can use the user exit..."LXCO1U06" and call the transaction POIT in back goround and submit the idoc. This exit is used @ save of TA code CO02. Moreover as the production order can be changed through several transactions like COHV, CO40, COOIS etc....you have to check whether this exit would be applicable for all transaction.
    Regards,
    Chinna

Maybe you are looking for