Which is better? why?

Hi, which macbook is better and why?
Both are brand new and has the price of around $85 diffrence. (i seldom burn cds, would test vista, xp, mac osX, and linux on the machine)
MA700LL/A (more expensive one)
MB061LL/A (cheaper by $85)
thanks

I'm not really sure what your point is?
The MA700LL/A is no longer sold through apple. You would have to find a re-selller that had some and then the price should be discounted because it is the "older" model.
The MB061LL/A is what is for sale at Apple right now.
It has a combo drive.
MA700LL/A (more expensive one)
It was more expensive when sold , no longer sold at apple so price is irrelevant. Has superdrive.
MB061LL/A (cheaper by $85)
Cheaper and has combo drive.
Mort

Similar Messages

In session and call tansaction methods, which is better . why?

hi
in session and call tansaction methods, which is better . why?

see the link:
<a href="http://www.itcserver.com/blog/2006/06/30/batch-input-vs-call-transaction/">batch inpunt VS call transaction</a>
"The most important aspects of the session interface are:
<b>Asynchronous processing</b>
Transfer data for multiple transactions
Synchronous database update. During processing, no transaction is started until the previous transaction has been written to the database.
A batch input processing log is generated for each session
Sessions cannot be generated in parallel. The batch input program must not open a session until it has closed the preceding session.
The most important features of CALL TRANSACTION USING are:
<b>Synchronous processing</b>
Transfer of data from an individual transaction each time the statement CALL TRANSACTION USING is called
You can update the database both synchronously and asynchronously. The program specifies the update type.
Separate LUW (Logical Units of Work) for the transaction. The system executes a database commit immediately before and after the CALL TRANSACTION USING statement.
No batch input processing log"
I hope I have been able to help you.
cordial greetings.

Which is better and why: Safari or Firefox?

Which is better and why: Safari or Firefox?

Thx, I've been using FF on my MacBook, as I did with PowerMacs before that. I used to work in the industry and stay up on current trends; but, I'm just a regular user with a new MacAir now and hate to bother my SF/SJ peeps with trivial questions.
As I start to load up the Air, I'm just a bit overwhelmed with the volume of bookmarks I've collected and organzied in FF on my MB.

Why assertion instead of if statement ? Which is better to use ?

Why assertion instead of if statement ? Which is better to use ?

Never assertion instead of if statement. The two have fundamentally different intents. Using assert to control program flow is a bad idea

Which is better and why a = new String("AA") or a = "AA"

Hi,
Which is better and why
String a = new String("AA") or
String a = "AA"
Does invoking a construtor waste memory? Please explain in detail.
Thanks in advance
Deepak

> So in case "AA" not there in string pool,
That is not correct.
does new creates "AA" on string pool as well as heap memory?Yes. The literal "AA" points to a pooled String object. The new operator creates a new String object with the same character sequence ("AA"). You can verify this with a little code...
String s = new String("AA");
assert s != "AA";
assert s.equals("AA");
assert s.intern() == "AA";~

In and EXISTS??which is better and why

hi...
Performance wise which is better IN or EXISTS and why..

user8469486 wrote:
hi...
Performance wise which is better IN or EXISTS and why..DomBrooks pointed out that it may not matter due to query optimization rewrites.
In theory it depends on circumstances.
Correlated EXISTS subqueries tend to be efficient if the lookup is properly indexed. If the list of values is very small (especially if you only get one value) an IN subquery might be more efficient.

Hi friends , in mapping program ,which is better one.why? explain me.

1)In mapping program ,which is better one.why? explain me.

Actually the sequence is
Graphical
Java
XSLT
ABAP
graphical mapping can prove to be the simplest of all mappings and easy to so also as u have a mapping editor and standard functions available.
when this becomes too complex v generally opt for java / xslt mappings.
when u are much comfortable with abap u may also opt for abap mapping.
still the choice depends on scenario. performance wise graphical and java mappings have
good results (also depends on ur code in java mapping).
refer this:
Comparing performance of mapping programs:
/people/udo.martens/blog/2006/08/23/comparing-performance-of-mapping-programs

Which is better sockets/socketchannel why

which is better java.io.Socket / java.nio.channel.SocketChannel

Better for what? They both work. Sockets are simple but only support blocking operations. SocketChannels are about ten times as complex to use but they support non-blocking and multiplexed I/O and also various types of direct and mapped buffering so they can also imply less data movement.

Which is better? Photoshop CS6 or Elements? And why?

Wife is an avid photographer and likes to be able to fix photos, make collages. Confused on which is better, Photoshop CS6 (and what is Extended?) or Elements? What are the pros and cons of each? Thank you for your time.

The Photoshop & Elements users hang out in those software forums. You should post there. This area is for MBP technical problems.

Which is better for gaming and why?

Hi,
I was researching budget gaming laptops(around $1000, INR 55000) and came up with two choices.....
1)HP Pavilion g6z-1d00 Notebook PC
http://shopping2.hp.com/en_US/home-office/-/products/Laptops/HP-Pavilion/A2B39AV?HP-Pavilion-g6z-1d0...
2)HP Envy 14-2130nr Notebook PC
http://shopping2.hp.com/en_US/home-office/-/products/Laptops/HP-ENVY/QE295UA?HP-ENVY-14-2130nr-Noteb...
Could anybody please tell me which is better for gaming (main purpose and best performance)?
The HP Envy looks great but I don't know much about AMD Quad Core.....
Also, is it possible to upgrade the graphics card on the HP Envy ( AMD Radeon 6630 to a better one) via a HP centre?
It seems to run most games quite well, but I need it to be able to play new games for at least 4 years more (college), while not factoring in the costs for any possible graphics card upgrade....
Please help!!

Thanks Huffer _ very useful.
I wasn't aware that there was a heat problem with the i7 processors, my dv8 runs at around 42 to 52 degrees, mind you I don't really put it under much load. I use it to play Blu-ray ISO files on my projector and for photo editing (Adobe CS4), it's an 820QM.
I have also changed the thermal compound to ICDiamond and drilled holes in the speaker cover to improve air flow, that made a difference too.
@ abhishekmaha
Don't take my comment to seriously, although I think it has some truth to it, it was meant to poke a bit of fun at you.
Heat has always been one of the biggest factors when it comes to any computer, designers try to make them thinner, lighter and cheaper and those types don't work for gaming very well. They're OK for the occasional one, but not on a regular basis. I believe that if you game on any machine that was not meant for it, you will not get 4 years out of it _ 2 years.
I wish I could tell you different, but I am not going to lie to you.
Heat basically affects 3 things on a laptop, the solder that holds the components on the motherboard, any mechanical moving parts, eg the hard drive, fan _ and the battery. You can remove the battery to prolong its life when gaming.
Heat breaks down the solder over time and the mother board simply stops working as far as the hard drive, it stops spinning because the tiny bearing(s) in there dry out and seize up.
If you don't want to use a cooling mat then prop up the back of the laptop, hanging it over the edge of the table will expose the fan intake, but will block off other vents.
60 degrees is a bit warm too, 50 is better or rather, the cooler the better. What ever machine you get, make a note of what the temps are when you first boot up and when it's hot. The idea is to get an average so you can judge when it is dangerously getting hot.
P.S. Be sure and give Huffer a kudos too.

Which is better??????

which is better?Dam really confused which speaker to buy??
i currently have a creative m2600.but am not getting enough performance or that feel while watching movies like avatar,step up 3 etc......so am planning to buy a 5.1.......not planning but i have decided to buy a 5.1....so..
which is better? the 6160 or 6060 or 6100.
which of these will provide me relly great exprience while playing games and most importantly while whatching hd movies and while listening to music.......
and other than this what i have to ask is...what is this "db" in speakers. i mean while looking at a speaker specs we can see it..like 65db,85db,75db..etc........
and when i compared specs of the three speakers i mentioned above i saw that the 6160 has low "db"........why is that?

The specs is just a guide, you won't be able to tell the slight difference in db using just your ears. Besides, it is just a comparison between the level of a music to the level of background noise, it does not necessary mean which speaker sounds better. If possible, please make a trip to your local electronics store and try out the speakers system yourself.

Which is better software for brochures and PDF forms ? Photoshop or InDesign ?

Which is better software for brochures and PDF forms ? Photoshop or InDesign ? and why ?

If you are going to be making a lot of brochures, with photos, you probably want both. Photoshop to edit the photos, and InDesign to assemble and layout images with text.

Which is Better Mac or Windows?

Which is Better Mac or Windows?
I got told that Windows is better than Mac.
I need to know:
1. How long an iMac lasts and how long a Windows computer last till they die and not work. (Prediction will do)
2. Why lots of people hate Mac and say that Mac's are crap.
3. Is a iMac worth the cost?
4. Is an iMac harder to use than a Windows computer?
Thank You
From Apple is The Best!!!!!!!

The case of Apple v. Windows is a subjective argument. Both systems have their merits, both have some aspects that some users don't like. Much depends on what you actually want to use them for.
Here is some reading material for you!
A Customer Experience Index report from Forrester Research came to the conclusion after studying almost 4,600 computer users' experiences from 2008 and asking them to score the ease of use of their computers, how enjoyable the experience is and whether or not the systems fulfill their owners' needs.
http://www.appleinsider.com/articles/09/04/17/apple_trumps_windows_pc_makers_in_ customer_experience_study.html
PC World (December 2010) has also found Apple products and after-sales service the most reliable:
http://www.pcworld.com/article/211074/the_tech_brands_you_can_trust.html
Switching from Windows to Mac:
http://support.apple.com/kb/HT2514?viewlocale=en_US
and
http://support.apple.com/kb/HT2518?viewlocale=en_US

Which is better at 3G

Which is better 3g? at&t or verison

"which is better, if, at school, 3G is non existant, and GPS is not an issue as all my cars have navigation?"
Why not pay a consultant to answer your question then rather than relying on a 'free-bee' <g> or 'freebie' from good folk who sometimes and for some people really can't be bothered to help people when they can't put in the effort to help themselves (being polite and British and all, otherwise I might be prompted to say "I don't give a flying f* for your inability to sort things out for yourself").
FYI, all apps work on 2.1 that worked on 1.0....
Good luck (you might need it through life)!

Spectral methods: Welch vs. Blackman Turkey, Which is better?

Hello,
i have a question.
LabView uses to estimate the frequency response in SI-Toolkit a
correologram method (Blackman-Turkey).
Matlab uses with tfestimate() a periodogramm method (Welch)to
estimate the Frequency response.
Which is better? In some books i read that Welch method is even a little bit
better and faster.So why doesn´t LabView use the Welch method as well?
Does somebody know where I can find the entire ecuation for the
Welch method?
Thx for help
Regards,
Rapha

Hi RRapha,
I only found out, that you can use the Welch.vi in Labview, too.
Take a look at the attached screenshot.
Best regards
Dippi
Attachments:
Welch.jpg ‏272 KB

Coding Preference ..Which is better for memory?

Hey all,
Javas garbage collection is sweet. However, I was reading somewhere that setting some objects to null after I'm done with them will actually help.
(help what .. I'm not sure.. my guess is memory used by the JVM)
Thus I have two ways to do the same thing and I'd like to hear peoples comments on which is "better" ... or will yield faster performance.
Task: I have a Vector of Strings (called paths) that hold absolute file paths. (Don't ask why I didn't use a String[]) I'd like to check and see if they exist, and if not, create them... I'll use the createNewFile() method for that.
Method A -- Here I'll reuse that File object
public void myMethod()throws Exception{
File file = null;
for(int i = 0; i < paths.size(); i++){
file = new File(paths.get(i).toString());
boolean made = file.createNewFile();
if(made){doSomething();}
file = null;
}Method B -- Here I'll use um... "dynamically made" ones that I won't eventually be set back to null
public void myMethod()throws Exception{
for(int i = 0; i < paths.size(); i++){
boolean made = (new File(paths.get(i).toString())).createNewFile();
if(made){doSomething();}
}So when the code eventually exists myMethod, the object "file" will be out of scope and trashed.... correct? If thats the case, then would there be any other differences between the two implementations?
Thanks

There's no real difference between the two. Choose the style you prefer,
although in the first one I'd lose the "file = null" statement since that
variable is about to disappear, and I'm move the definition into the loop
-- always give variables as small a scope as possible, mainly to
keep the logic simple:
public void myMethod()throws Exception{
    for(int i = 0; i < paths.size(); i++){
        File file= new File(paths.get(i).toString());
        boolean made = file.createNewFile();
         if(made){doSomething();}
}

Which is better? why?

Similar Messages

Maybe you are looking for