Which is the software needed for an installation on a production server
Hi,
which is the software needed for an installation on a production server (windows 2008) of Forms/Reports 11g ?
I mean the old 10g stand alone forms and report service but un 11g release ..
Regards
For application deployments (production), you will need the following software. The same is true for a design-time environment.
1. Weblogic Server 10.3.2
2. Fusion Middleware 11.1.1.2
See my update in the following:
Re: Some FORMS quesion...
All products are contained within the Fusion Middleware (Forms, Reports, Portal, Discoverer) distribution. This includes Builders, Runtime components, HTTP Server, Web Cache, etc. During the installation process, you choose which you want to install.
Similar Messages
-
Will my MacBook Pro '11 support the software needed for my new AirPort Time Capsule?
I've got a MacBook Pro '11, OS X 10.6.8 and am trying to back up my photo library to a new AirPort Time Capsule 2TB.
When trying to set it up in AirPort Utility, I am getting the warning "This version of AirPort Utility doesn't support this AirPort wireless device and might improperly configure the device if you continue to use it. Check www.apple.com/support/airport for the latest version of AirPort Utility."
1. Where do I go to get the latest version of AirPort Utility?
2. Will the latest version work with OS X 10.6.8?
Thanks for any help you can offer.Yes. The latest version will be installed when you upgrade to Yosemite.
Upgrading to Yosemite
You can upgrade to Yosemite from Lion or directly from Snow Leopard. Yosemite can be downloaded from the Mac App Store for FREE.
Upgrading to Yosemite
To upgrade to Yosemite you must have Snow Leopard 10.6.8 or Lion installed. Download Yosemite from the App Store. Sign in using your Apple ID. Yosemite is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mavericks/Yosemite - System Requirements
Macs that can be upgraded to OS X Yosemite
1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table - RoaringApps. -
Not a comforting message to see...
Here are the errors just before the above message is emitted and the install ends.
Jul 26 05:33:33 localhost OSInstaller[344]: PackageKit: Extracting file://localhost/Volumes/Mac%20OS%20X%20Install%20DVD/Packages/Essentials.pkg (destination=/Volumes/i7Mac/.OSInstallSandbox-tmp/Root, uid=0)
Jul 26 05:34:51 localhost OSInstaller[344]: PackageKit: Got copier error 2 extracting to path ./usr/lib/zsh/4.3.11/zsh/zselect.so: Read-only file system
Jul 26 05:34:51 localhost Unknown[329]: /SourceCache/AppleFSCompression/AppleFSCompression-37/Common/DataPool.c:135: Error: finished pool without filling it
Jul 26 05:34:51 localhost Unknown[329]: /SourceCache/AppleFSCompression/AppleFSCompression-37/Common/commonUtils.c:360: Error: fh_pread -1
Jul 26 05:34:51 localhost Unknown[329]: /SourceCache/AppleFSCompression/AppleFSCompression-37/Common/StreamCompressor.c :294: Error: pread failed for /Volumes/i7Mac/.OSInstallSandbox-tmp/Root//usr/lib/zsh/4.3.11/zsh/zselect.so: Undefined error: 0
Jul 26 05:34:51 localhost Unknown[329]: /SourceCache/AppleFSCompression/AppleFSCompression-37/Common/StreamCompressor.c :928: Error: returning errno 22 from FinishStreamCompressorQueue
Jul 26 05:35:33 localhost OSInstaller[344]: PackageKit: Install Failed: Error Domain=PKInstallErrorDomain Code=110 "An error occurred while extracting files from the package “Essentials.pkg”." UserInfo=0x7f83610395f0 {NSLocalizedDescription=An error occurred while extracting files from the package “Essentials.pkg”., NSFilePath=/Volumes/i7Mac/.OSInstallSandbox-tmp/Root, NSURL=Essentials.pkg -- file://localhost/Volumes/Mac%20OS%20X%20Install%20DVD/Packages/OSInstall.mpkg, PKInstallPackageIdentifier=com.apple.pkg.Essentials, NSUnderlyingError=0x7f8360d42420 "The operation couldn’t be completed. FinishStreamCompressorQueue error"} {
NSFilePath = "/Volumes/i7Mac/.OSInstallSandbox-tmp/Root";
NSLocalizedDescription = "An error occurred while extracting files from the package \U201cEssentials.pkg\U201d.";
NSURL = "Essentials.pkg -- file://localhost/Volumes/Mac%20OS%20X%20Install%20DVD/Packages/OSInstall.mpkg";
NSUnderlyingError = "Error Domain=BOMCopierFatalError Code=1 \"The operation couldn\U2019t be completed. FinishStreamCompressorQueue error\" UserInfo=0x7f8360d47220 {NSLocalizedFailureReason=FinishStreamCompressorQueue error, offset=2847022, type=BOMCopierFatalError, sourcePath=/Volumes/Mac OS X Install DVD/Packages/Essentials.pkg, destinationPath=/Volumes/i7Mac/.OSInstallSandbox-tmp/Root}";
PKInstallPackageIdentifier = "com.apple.pkg.Essentials";
Jul 26 05:35:33 localhost OSInstaller[344]: install:didFailWithError:Error Domain=PKInstallErrorDomain Code=110 "An error occurred while extracting files from the package “Essentials.pkg”." UserInfo=0x7f83610395f0 {NSLocalizedDescription=An error occurred while extracting files from the package “Essentials.pkg”., NSFilePath=/Volumes/i7Mac/.OSInstallSandbox-tmp/Root, NSURL=Essentials.pkg -- file://localhost/Volumes/Mac%20OS%20X%20Install%20DVD/Packages/OSInstall.mpkg, PKInstallPackageIdentifier=com.apple.pkg.Essentials, NSUnderlyingError=0x7f8360d42420 "The operation couldn’t be completed. FinishStreamCompressorQueue error"}
Jul 26 05:35:34 localhost OSInstaller[344]: Install failed: The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.
If I boot to the "Recovery HD" I get a message "Installation Failed, Try re-intalling" Which would be a fine idea, but I can't because if I re-start installation from the hard drive I get the above errors.
I've burned the "InstallESD.img" to a DVD, but it also doesn't seem to work. Comes up as though I'm in the RecoJen,
Here's what I did to get Lion installed:
Burn the installer to a DVD and install from there. It worked for me. Here's what you need to do:
First you need another computer running at least 10.6.8.
1. On the other computer go to 'App Store' (make sure you're logged in to the App Store with the AppleID you used on the troubled computer)
2. Click on 'Purchased' in the 'App Store' window's toolbar
3. If you are on 10.6.8, and haven't downloaded Lion on that computer just click "Install" to download the installation application.
3. a, if the other computer is already running Lion, you'll need to re-download the installer.
3. b. Hold down 'Option' when selecting 'Purchased' then you click "Install"
4. When the Lion Installer starts up, just quit it. You want to work with the Installer application.
5. Find the "Install Lion OS X" application in the 'Applications' folder.
6. Hold down 'Control' and click on the application and select 'Show Package Contents'
7. Find 'InstallESD.dmg' which is in the "Shared Support" folder and copy it to your desktop.
8. Burn 'InstallESD.dmg' to a DVD ('Disk Utility' is simplest to do this).
9. Put the new install DVD into the computer that has Lion partially installed and reboot holding down the "C" key.
10. run the installer as normal, selecting your harddrive as the target.
In my case, when it rebooted to the harddisk the Lion installer started AGAIN. If this happens, let it run. Then you should be done.
Hope this helps. -
Hi! I can't upgrade my iTunes 10.3.1.55 on my Windows XP 2002 SP3 to the latest version of iTunes. Got the message: "A problem has occured with the Windows Installer-package. A program needed for this installation could not be run." What to do?
Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time? -
Software needed for the USB device, "USB Interface Controller TEST2.0"
My mother recently acquired a digital camera. She acquired it from a second-hand store, which did not include an interface cable or software. The manual (and the USB port on the camera) indicates that a male-male USB cable is necessary for photos to be copied to the hard drive.
I was not successful in locating such a cable at any local electronics store (I assume such a cable is now out-of-date). I purchased one from a seller on eBay. The brand is "e circuit electronics".
Upon powering up the camera with the cable connected to it and the computer, the following message appeared:
"Software needed for the USB device "USB Interface Controller TEST2.0" is not available. Would you like to look for the software on the Internet?"
I clicked "Yes". After an approximate two-minute wait, another message appeared stating:
"Software Update is not able to connect to the Internet. Please check your configuration and try again."
I deleted, "Software Update Preferences" in the Preferences folder inside the System Folder, without solving the problem. How do I solve the issue of allowing Software Update to connect to the Internet?Thank you for your continued assistance, BDAqua. Unfortunately, the driver you linked to does not seem to be compatible with the camera. It is a driver for the V20 model, whereas my model would correspond to be a V2755, as referenced from a list of other Vivicam models when during a search at the Open Drivers web site.
From the system requirement about the card reader you gave me, it will not work, as this system is running 9.1. I am hesistant to upgrade this computer to 9.2, as I have experienced system unstability with that version, with even the 9.2.2 update applied.
In the mean time, I have e-mailed Vivitar regarding this issue, but have as of yet received a reply.
I am not certain as to other specifics to give you, in order to solve the Software Update problem. Please elaborate.
Yes eww, the computer in question is able to fully connect to the Internet for all that I need. I am fully aware of the difference between a computer connecting to the Internet, and a computer connecting to a digital camera. I have 15 years of Macintosh experience. -
While trying to re-install Mac OS X, appears the following screen:
Install failed
Mac OS X could not be installed on your computer
The installer encountered an error that caused the installation to fail.
Contact the software manufacture for assistance.
Click Restart to restart your computer and try installing again.You should be able to install Mac OS X 10.7 or later on your 2011 MacBook Pro without issue, if it came with 10.6.3 as your signature suggests. Mind you, any 2011 MacBook Pro must use the original 10.6 installer disc labelled MacBook Pro if it desires to have 10.6 installed on it. The retail installer disc will not work on that model, nor will one from another age MacBook Pro, or other model labelled installer. Also
10.7 came both on USB Flash drive and Mac App Store installer versions. Both required either 10.6.6 minimum be pre-installed, or no Mac OS X operating system on the drive or partition it was to be installed on.
10.7.1 through 10.7.5 combo could be installed only once 10.7 had been installed. A combo update is available for installing on top of any version of 10.7. Otherwise only the preceding version could be updated to the next.
10.8 came only on Mac App Store installer. It is available only to 10.6.8 and later users.
10.8.1 to 10.8.5 combo could be installed only once 10.8 had been installed. A combo update is available for installing on top of any version of 10.8. Otherwise only the preceding version could be updated to the next.
10.9 came only on Mac App Store installer. It is available only to 10.6.8 and later users.
Both 10.9 and 10.9.1 had a serious security vulnerability, which only 10.9.2 addressed.
10.9.2 combo could be installed only once 10.9 had been installed.
For all three Mac App Store releases, the partition to be installed on had to be GUID partition formatted according to Apple Disk Utility. -
"Installer could not install some files in "/". Contact the software manufacturer for assistance."
What does THAT mean!!! Appears when trying to download the new Itunes!!!
Any ideas??
"Installer could not install some files in "/". Contact the software manufacturer for assistance." ?????????????????????can someone please help!!! I can't install anything on my mac!!! And my iphone isnt even showing up in itunes when i plug it in!
-
On Mac OS X 10.9.5
After downloading CC from http://www.tss.qld.edu.au/itdepartment/AdobeCreativeCloud.aspx
The .zip download is fine.
The installer runs but stops half way through (during "running scripts") and gives the error message in the pic below
The installation failed - The installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance
ANY HELP HUGELY APPRECIATED. I have know idea what to do
Thanks
SteveSince you did not download from Adobe, I don't think Adobe can help
When I clicked the link you provided, it LOOKS like your school has created custom install packages... so check there -
i want to update my macbook pro, but it's showes always the installation failed and i should contact the software manufacturer for assistance. i want to update my OS X 10.8.4
Not normal. Shutdown and restart.
-
The software required for iPhone is not installed. Run the iTunes installer
I install and reinstall itunes many times following the "Support instructions" but nothing solve my problem.
At the end of each re-instalation, when i start itunes i get this message "The software required for iPhone is not installed. Run the iTunes installer to remove iTunes, and then install iTunes again".
The driver USBAAPL.SYS, and the Apple Mobile Device Support is never installed.
Please HELP!
Thanks.jaffy,
iTunes is not supported on 64-bit versions of Microsoft Windows Vista or XP. As is stated in this kbase article:
http://docs.info.apple.com/article.html?artnum=301301
To quote the article:
"iTunes is currently not supported in Windows XP Professional x64 Edition or any 64-bit edition of Windows Vista. Features may or may not work correctly."
Nathan C. -
Just purchased a MacBook Pro but had to reinstall OS X but now when I try to install anything I get the following message - The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Select "/var/log/install.log" from the file list. Post the messages from the last installation attempt, starting from the time when you launched the Installer or Software Update. Post the log text, please, not a screenshot.
If there are runs of runs of repeated messages, please post only one example of each. Don’t post many repetitions of the same message. -
Any application I install on my MacBook Pro gives the message "The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance" What can I do?
Well that's one. Try the Microsoft help forums: http://www.microsoft.com/mac/support It's their application.
Name another. -
When I tried installing this software, I get this error: "The installer encountered an error that caused the installation to fail. contact the software manufacturer for assistance." Any idea why? My computer is Mac OS X Version 10.7.5
What software are you trying to install?
-
Which Image should we need for the below model router 2951 to support 4 Byte ASN number ?
Hi All,
Which Image should we need for the below model router 2951 to support 4 Byte ASN number ?
CISCO2951/K9
Cisco 2951 w/3 GE 4 EHWIC 3 DSP 2 SM 256MB CF 512MB DRAM IPB
PWR-2921-51-AC
Cisco 2921/2951 AC Power Supply
CAB-ACSA
AC Power Cord (South Africa) C13 BS 546 1.8m
HWIC-BLANK
Blank faceplate for HWIC slot on Cisco ISR
ISR-CCP-EXP
Cisco Config Pro Express on Router Flash
MEM-2951-512MB-DEF
512MB DRAM (1 512MB DIMM) for Cisco 2951 ISR (Default)
MEM-CF-256MB
256MB Compact Flash for Cisco 1900 2900 3900 ISR
SM-S-BLANK
Removable faceplate for SM slot on Cisco 290039004400 ISR
SL-29-IPB-K9
IP Base License for Cisco 2901-2951
S2951UK9-15501T
Cisco 2951 IOS UNIVERSAL
EHWIC-1GE-SFP-CU
EHWIC 1 port dual mode SFP(100M/1G) or GE(10M/100M/1G)> Can someone suggest ?
a forum is no realtime-communication ... ;-)
For the ISR G1, it was supported from 12.4(24)T, so I would assume that your ISR G2 has this feature if you are running 15.x.
EDIT: The Feature-navigator says that it's supported starting with 15.1(2)T. -
"The software required for communicating with the iPod is not installed..."
I realize my explanation of my problem is long-winded, so if you want a shortened version, here it is:
I've followed all the instructions trying nearly everything, and no matter what I do, iTunes gives me the error saying: "The software required for communicating with the iPod is not installed correctly. Please reinstall iTunes to install the iPod's software." My G5 iPod (60GB) works on two other computers (both without any music on them), so I assume there something wrong with my computer and not the iPod itself.
Now for the long-winded story of the last eight hours of my life...
I just got the Generation-5 iPod Video (60GB) a today and I'm having problems already. I followed the instructions and installed the iPod software and then plugged in my iPod (iTunes has been on my computer for a while now). I was expecting iTunes to open after plugging in the iPod, but my device manager only detected and installed "a new device". I manually opened iTunes and got an error saying: "The software required for communicating with the iPod is not installed correctly. Please reinstall iTunes to install the iPod's software."
After re-installing the iPod software and iTunes, and restarting my computer countless times, I came looking for help here. I found this page, which seemed to outline my problem exactly. My computer recognizes the iPod as a drive, but iTunes won't have anything to do with it. I have all the symptoms outlined in the heading, so I hoped to solve my problem there. I followed the instructions step-by-step, and after the final restart, I open iTunes to get the same exact error message.
I decided to determine whether there was a problem with my iPod or if it was my computer. I plugged my iPod into my uncles's powerbook, and got to the point where I can name and configure my iPod. I expected it to work flawlessly on a Mac (which it did) but there is no way for me to continue using a Mac (after tomorrow) for my iPod. This formatted the iPod for a Mac, so I went to another (different from the original) Windows computer, clean of any iTunes and iPod software, and followed the instructions exactly as they're supposed to be followed. After the installations, I plugged in my iPod, and although iTunes didn't open, I was able to format back to Windows and name my iPod (a step in the right direction). I should note that my (anti-iPod) computer is a Windows XP Pro, and the working one is Windows XP Home Edition. This was all well and good, until I remembered there was no music on this computer. So my iPod is completely working there, but there isn't anything I can do with it.
Next, I came back here and browsed around the discussion boards, hoping to find somebody with a similar problem to mine. There seems to be alot of errors concerning iTunes not recognizing the iPod, but none of the solutions I tried worked for me, including changing the drive letter. I get the "iPod Service Error" while trying to restore to factory settings through iPod updater.
Of course, I could transfer all 32GB of music from one computer to another, but the second (working) computer isn't mine and I won't have access to it in a couple months. It would be most convenient if I could get my iPod working on my own computer. Any help would be appreciated, especially from somebody who has solved this problem or know how to solve this problem.
P.S.
Here are some other minor details that my be important, but I didn't feel they were worth including.
- My brother has his iPod mini set up on my computer, under a different user login. He gets the same error once in a while, but re-installing iTunes always solves the problem for him. I had him try solving my problem his way, but nothing worked for him either.
- My computer is an AMD Athlon 64 Processor 3200+, 512MB RAM with Windows XP Pro SP2 installed. My internal hard drive is partitioned, using the letters C, D and H (C being my system files, D used for recovery files and H for my applications and games). My E drive is used as a DVD/CD-ROM Drive, and drives F and G are reserved for virtual drives (none have been running during this entire ordeal). My external hard drive uses the letter I, and I manually set my iPod to use the letter J (I've never used 'J' for anything else before).
- Yes, I have downloaded and installed the latest versions of iTunes and the iPod software.
- I'm assuming there is a problem with my computer and not my iPod, since it worked on both other computers I tried. I'm hoping it's as simple as changing a registry file or cleaning out (yet another) temp directory.Solution to "Software required for communicating with the iPod is not installed"!
I battled this same problem for about 5 hours. Going through re-installations, the "5 R's", all these discussion boards. Nothing worked.
The problem is that iPodService was repeatedly crashing after minute or so. You can verify this by hitting Ctrl-Alt-Delete and noting that iPodService is missing from the process list (sort by image name), or by right-clicking on My Computer and selecting "Manage", then going to Services and checking out the IPodService service - if it gives you the option to "Start", then it's not running.
Here is what worked.
1. De-install iTunes and iPod (if you have the updater installed) completely by going to Start --> Control Panel --> Add/Remove Programs. Also delete the C:\Program Files\iTunes and c:\Progam Files\iPod\bin directories. (Don't worry, this doesn't affect your saved music files.)
2. Log in as an Administrator
3. Go into the registry (note this is dangerous - you should be careful) and remove the iPod entries that the uninstaller misses.
3.1 Go to Start menu --> Run.
3.2 Type in "regedit".
3.3 Go to HKEYCLASSESROOT --> IPodService.iPodManager.
There are two keys here, iPodManager and iPodManager.1. In my case, I did not have permission to view either of these. I think this is the root cause of the problem. I think the installer can't properly update these because it doesn't have permission. So you need to change the permissions:
3.4 Right-click on IPodService.IPodManager
3.4.1 Select "Permissions..." A warning will appear saying you don't have permission, but that you can change permissions.
3.4.2 On the window that launches, click on "Advanced..."
3.4.3 Click on the "Owner" tab.
3.4.4 Select a valid account (the one you're logged in under) under "Change Owner To".
3.4.5 Hit "OK".
3.4.6 Back on the main Permissions window, hit Add and add the same account as a valid user.
3.4.6.1 Where it says "Enter the object names to select", type in the account name, e.g. "Smith".
3.4.7 Click on the "Allow" checkboxes for "Full Control" and "Read".
3.4.8 Hit "OK".
3.5 Repeat procedure for the "iPodManager.1" key.
3.6 Now right-click and delete both of these keys.
I think that's all that's required, but I also searched through the registry and deleted the following keys.
4. Other keys I deleted:
4.1 HKEYCLASSESROOT --> IPodManager.IPodManagerUI.1
4.2 HKEYLOCALMACHINE --> SOFTWARE --> Apple Computer Inc. --> iPod
I think that's all I deleted, but I'm not positive. I seached for instances of "ipod" using the Find... and Find Next functions under the Edit menu.
5. Exit out of the registry editor.
6. Re-install iTunes. I re-installed iTunes and reconnected the iPod, and everything worked.
I want to repeat that editing the registry can completely mess up your computer if you modify the wrong things, so only do this if you're comfortable, and be extremely careful.
Hopefully this helps!
Apple support people: assuming this works, please add it to your solutions page, and feel free to reimburse me for spending half of Christmas figuring this out.
Mark
Maybe you are looking for
-
External library DC vs J2EE Server Component - Library DC
Hi all, I have been developing where I used jars through the public part of an external library DC and it worked fine, but I'm wondering: What is actually the difference between a external library DC and a J2EE Server Component - Library DC ? When d
-
I need to buy some apps but I need them in spanish and at the store they are only in english, what can i do?
-
Installing CFMX 7.0.2 on Mac Intel
Hi, Need help urgently! I've installed the new CFMX 7.0.2 on my Intel Mac. When installation in complete, it says: "You have successfully completed the first step in installing Macromedia ColdFusion MX 7. However, the coldfusion service does not appe
-
How to read selected item value from DropDownList?
Hi, The DropDownList component has a selectedItem property that is supposed to return a ListBase. But what I want is just the "String" that is supposed to be the selected Item in the DropDownList. How can I read this value? thanks -Malena
-
I cannot get my iphone 4s to master reset..
I couldn't recharge my phone and the battery went too low. I shut it off and now it wont do ANYTHING, i tried to master reset it but it remains unresponsive. Itunes isnt recognizing the device either. Is there something else other than this i can try