Which L&F to use?

Hello,
I wanted to know which Look and Feel is good in any platform. I am currently using this L&F ( System L&F). I dont find it much effective in Windows.
               UIManager.setLookAndFeel(UIManager.getSystemLookAndFeelClassName());
Can any one suggest me which L&F is good in any platform(Linux/ Solaris/ Windows/ etc..)?
Thanks
James

The Metal L&F was developed to be cross-platform. Some people hate it but I'm a big fan.

Similar Messages

  • In Adobe Acrobat 9 which I have been using for a long time (Widows 7) says, You cannot use this prod

    In Adobe Acrobat 9 (Wndows 7) which I have been using for a long time now it says I cannot use it withoutv repairing.  It instructs me to uninstall & reinstall...

    I have not run into this yet with my AA9 and Win7, but have been seeing posts about it. I would try a repair before I would do an uninstall and reinstall. You might also turn off javascript for a bit in case there has been some javascript that has caused problems (ok, making wild guesses). If you do decide to uninstall, be sure to deactivate first, uninstall, run http://labs.adobe.com/downloads/acrobatcleaner.html, and remove any left over parts of the Acrobat folder. Then proceed to the reinstall and updates.
    There is a question about whether being able to use it is correct, or you are just getting some message that is a spam that somehow got into your system (again, a possible javascript issue). Besides turning off javascript, you could also try isolating the javascripts to moving them to a temporary directory and seeing if one is causing the problem.

  • XSLT mapping - Which transformation engine is used in PI 7.0

    Hi,
    In my favorite xslt tool I can choose which transformation engine I want to use while executing the xsl.
    Which Transformation engine is used in PI 7.0 ?
    (Nice to test with the same as PI have....)
    Br, Martin

    Hi ,
    as per my knowledge PI 7.0 uses XALAN parcer to execute XSLT Mapping programs,its available in in PI server it slelf.
    Regards,
    Raj

  • Be grateful for your help with Photoshop Elements which I have been using for several years.

    Be grateful for your help with Photoshop Elements which I have been using for several years.  Does Elements need to have access to ‘My Pictures’ on Windows as when I remove Photos from ‘My Pictures’, Elements later, when backing up, gives a message that it is unable to ‘reconnect’ to the same picture on elements.  On other occasions when removing a photo from Elements catalogue I also get a similar message when backing up saying ‘unable to reconnect’.  1. Is there a relationship between Elements and My Pictures and is Elements dependant on    the Windows ‘My Pictures’? 2. Why does some photos in Elements in some cases cause them to multiply e.g. double; triple; quadruple; and on occasions even more?  Is there something I need to do to stop this or an easy way I can remove the multiples without spending hours doing it manually one by one?  Am I doing something wrong? My O/S is Windows XP SP2 and windows Vista on my Laptop.  I have been using Elements 5 and have just purchased Photoshop Elements 8.0. (Upgrade) and about to install it. Be grateful for any advice as I do enjoy using the program if only I can resolve this issue.  I am not a PC wiz and mainly use Elements to catalogue photos from which I compile collections and from them slide shows with music.  Any advice appreciated Sonny.t PS Have tried to post this previously but without success so hoping to see message appear and a +response

    The organizer doesn't care where you send your photos when you download them via the downloader or where they happen to be when you first bring them in if you use the Get Photos command, but once your pics are in the Organizer, you *must* move them from within organizer or it can't find them. You don't have to use My Pictures at all if you don't want to, but regardless of the folder where you put your photos, if you want them someplace else, you use organizer to do it.

  • How to set up set which NIC card to use for multicast?..

              I just downloaded Rolling Patch 1 for WLS6.0SP2.
              While reading the README file it says
              " ISSUE 42518: Provided a way to set which NIC card to use for multicast traffic
              Can anyone tell me how to set this?. on my WebApplication server it has two NIC
              cards and I want to use the NICcard which is being used to talk to internal network
              for multicast messages.
              One more thing,
              Can anyone one tell how to search for bugs (ISSUES) in weblogic. I am looking
              place where I enter ISSUE number and should get the detailed description of bug/issue
              etc..
              Thanks for helping,
              Nilesh
              

              Thanks Kumar, I'll try this.
              Does this -Dweblogic.interfaceAddress used only for multicast. Or this is also
              used to talk to AdminServer?.
              The other problem I am facing is when I restart the AdminServer in recovery mode
              it's not finding my WebApp servers, because my webapp servers are on public network
              and my admin (management) server is on private network.
              please look at http://newsgroups.bea.com/cgi-bin/dnewsweb?cmd=article&group=weblogic.developer.interest.management&item=1217&utag=
              , for more details about my problem.
              Thanks,
              Nilesh
              Kumar Allamraju <[email protected]> wrote:
              ><!doctype html public "-//w3c//dtd html 4.0 transitional//en">
              ><html>
              >You should be able to do it via console in 6.1
              ><br>Not sure if it was added in 6.0
              ><p>For 6.0 you can set this via command line
              ><br>java -Dweblogic.interfaceAddress=<addr>
              ><p>You need 6.0 SP2 RP1
              ><p>--
              ><br>Kumar
              ><p>Nilesh Shah wrote:
              ><blockquote TYPE=CITE>I just downloaded Rolling Patch 1 for WLS6.0SP2.
              ><br>While reading the README file it says
              ><br>" ISSUE 42518: Provided a way to set which NIC card to use for multicast
              >traffic
              ><br>"..
              ><p>Can anyone tell me how to set this?. on my WebApplication server it
              >has two NIC
              ><br>cards and I want to use the NICcard which is being used to talk to
              >internal network
              ><br>for multicast messages.
              ><p>One more thing,
              ><p>Can anyone one tell how to search for bugs (ISSUES) in weblogic. I
              >am
              >looking
              ><br>place where I enter ISSUE number and should get the detailed description
              >of bug/issue
              ><br>etc..
              ><p>Thanks for helping,
              ><p>Nilesh</blockquote>
              ></html>
              >
              

  • I am confused about something.  How do I read a book on my MacBook Pro?  I can't find the iBook app anywhere, which is what I use on my iPad.  The book I want to read is in my iTunes but I can't click on it.  My iBook library does not show up in iTunes.

    I am confused about something.  How do I read a book on my MacBook Pro?  I can't find the iBook app anywhere, which is what I use on my iPad.  The book I want to read is in my iTunes but I can't click on it.  Some of my iBooks show up in my iTunes but they are "grayed" out.  The only books that respond in iTunes are audiobooks and that's not what I'm looking for.  Is this a stupid question?

    Nevermind - I answered my own question, which is I CAN"T READ ANY BOOKS I purchased in iBooks on my MacBook Pro.  If I want to read on my mac I have to use Kindle or Nook.  Which means any book I've already purchased through iBooks has to be read on my iPad.  Kind of a drag because there are times when it's more convenient for me to read while I'm sitting with my Mac.

  • I accidentally set up two accounts.  One account with my old e-mail address which I've been using for years and has all of my purchases on it.  Now I have a new account with my current e-mail address. How do I disable this new account?

    I accidentally set up two accounts.  One account with my old e-mail address which I've been using for years and has all of my purchases on it.  Now I have a new account with my current e-mail address. How do I disable this new account?  I need to disable the new e-mail address account so that I can add it as an additional e-mail to my old account.  THEN, how do I make this new e-mail address my primary e-mail for this old account?

    Did yoo go to Settings>iTunes and App Stores and sign out and sign back in?
    Next see:
    Frequently Asked Questions About Apple ID

  • HT1311 I changed my apple id and have a gift card credit on the old account which I no longer use.  How do I transfer the gift card $ to my new apple id?

    I changed my apple id and have a gift card credit on the old account which I no longer use.  How do I transfer the gift card $ to my new apple id?

    Click here and request assistance.
    (75296)

  • In which country should I use my Apple ID?

    Hello!
    I have bought an used iPhone almost 2 weeks ago and I try to know my device better,
    so I would like to ask some questions
    Questions are about country and location associated with my Apple ID, App Store, iTunes and apps overall.
    To let you begin solve my problem, first I need to say something:
    1. I have created Apple ID without credit card information (using iTunes, 'none' in the credit cards information)
    2. I am from Poland and I have created my Apple ID in Poland (also I've written that I am from Poland while I was creating my Apple ID)
    3. I don't know which country I should associate my Apple ID with
    3. I have recently downloaded many, many apps for my iPhone 4s (using Apple ID associated with Poland country)
    4. I have done many photos, video recordings, messages etc.
    5. I am (currently) using Polish App Store and Polish iTunes Store.
    Here's my problem to solve and my questions to answer:
    1. What disadvantages I have, if I am using Polish iTunes & App Store? (and not for example USA?)
    2. I discovered iTunes Radio is only available in USA (so I have changed Apple ID's country information to United States )
         Why it isn't in any other country?
    3. Once I have downloaded many apps on my iPhone (with Apple ID's country information - Poland) and updated some apps,
         after changing country of Apple ID I have noticed, that there aren't any apps in 'Purchased' section, nor in 'Not on this phone' section.
         There were only apps which I have downloaded using USA Apple ID information.
         The same thing goes with iTunes and downloaded songs in 'Songs' section. (not in Music. in iTunes Store)
         Why it looks like that?
    4. Does Wish List on iTunes Store/App Store changes, when I change country of my Apple ID?
    5. Are sections in the App Store such as 'Editors' Choice', 'App of the Week', 'Top Charts' 'Single of the Week', 'Going to the Cinema'
        are different in every country's App/iTunes Store?
    6. Which apps are only available in United States and not in other countries/Poland?
         I have found, that there aren't Netflix, Paper - stories from Facebook, Facebook Camera, Google Music and many other apps in the Polish App Store.
    7. Are there any songs, albums, movies not available in Polish App Store & iTunes Store?
    And the last question! The most important one!
    Should I stick with poor Polish App Store and Polish iTunes Store or change my Apple ID country to United States? There are definitely more apps in the USA and not available in Poland, the same goes with iTunes Store. The prices are lower than in the Polish App/iTunes Store, where you have to pay in Euro, not even in złoty. If I change my Apple ID to USA I would buy USA gift cards and buy games, songs etc. I will be able to have iTunes Radio, free single of the week etc. Should I change my Apple ID country information? If so, will I have to delete all my apps from iPhone and download them again, being in the United States App Store (to find all my apps in 'Purchased' and 'Not on this iPhone' sections? They really annoy me, iwhen they are not there!)
    Will all my games datas be destroyed? Will I be able to play with my friends on the Game Center? What if someday I will have to change my Apple ID country, because I have moved to another? (maybe from Poland)? Will there be any other disadvantages of using USA iTunes/App Store being in Poland?
    Should I change my Apple ID country information to United States?
    Thank you very much for answering and reading my loooooooooong problem and a lot of questions! I really appreciate your help!

    I have another problem.
    I have deleted all apps from my iPhone 4s and then I have changed my
    Apple ID's country information from Poland to United States.
    After that, I have downloaded all deleted apps.
    But only few are in 'Purchased' section on iPhone!
    I guess only these, I have downloaded using USA App Store, not Polish.
    I am getting frustrated, because I have got too many problems with iOS
    and it doesn't look it will get better... Please help me ASAP! Thanks!

  • I have iTunes on my laptop but it is registered to an apple id for an ipod which I have not used/owned for years.  How do I add my new apple id which I use on my iPhone to my iTunes on my laptop?

    I recently purchased two songs which refuse to download on my iPhone 4s.  Other songs from the same albums downloaded just fine.  In an attempt to recover these songs I opened iTunes on my laptop which I have not used since I sold my ipod years ago.  The iTunes on my computer is associated with an old Apple ID that was connected to my iPod.  How do I get my new Apple ID synced with the iTunes on my laptop?

    Hello Leanna,
    Thank you for the details of the issue you are experiencing.  You can sign into iTunes with your Apple ID using these steps:
    Use your Apple ID with the iTunes Store
    Open the latest version of iTunes.
    Choose Store > Sign In.
    Enter your Apple ID and password and click Sign In.
    Click Review when asked to review your information.
    Enter your billing information.
    Click Continue after you enter your credit card and billing information. You can remove or edit your credit card information at any time. Learn more about updating your iTunes Store account information.
    Using an existing Apple ID with the iTunes Store, Mac App Store, and iBooks Store
    http://support.apple.com/kb/HT2589
    You will also need to authorize your computer to play purchases with this Apple ID:
    Open iTunes
    From the Store menu, choose Authorize This Computer. (In earlier versions of iTunes, access this option from the Advanced menu).
    When prompted, enter your Apple ID and password, then click Authorize.
    iTunes Store: About authorization and deauthorization
    http://support.apple.com/kb/HT1420
    With the latest version of iTunes on Windows, the menu bars are hidden, so you may need to enable them to get to the Store menu.  You can follow these steps to enable the menu bars:
    To keep the iTunes menus active, change the setting by selecting the Menu icon in the upper-left, and then selecting Show Menu Bar. Alternatively, you can press Control-B.
    iTunes: Turning on iTunes menus in Windows 8 and 7
    http://support.apple.com/kb/HT5610
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Two graphics card on macbook pro which one do I use?

    I have two graphics cards on my macbook pro. ADM random 6490m (256mb vram) and Intel HD graphics 3000 (512mb vram). My question is which one should I use? I don't do any hardcore gaming or photoshop. I guess that I am just looking for the best display and least buffering if that even has anything to do with the graphics card. I just want to get the most out of my macbook. I appreciate any advice. Thank you.

    Your MBP more or less chooses which graphics card to use automatically.  In System Preferences>Energy Saver, check Automatic graphics switching.  When it's checked on, it will use the higher power and higher quality dedicated AMD 6490 when you're plugged into the wall, and uses the Intel 3000HD when on battery.
    I have downloaded gfxCardStatus to give me more control over which graphics card to use.  There are times I might want the AMD while on battery, even though it runs hotter and uses more battery life. 
    Either card will do well with HD movies, though I notice a lot more artifacts with the Intel 3000 when the movie has a lot of action or explosions or sounds.  If you want to do hardcore gaming, you need the AMD of course.  Photoshop is more dependent on the central processor rather than the graphics card, so I'm not sure you'd have much issue using either one.

  • My apple tv 2 says I can't stream music from my iTunes library on my iMac without settng up iTunes Match. I don't want to set up iTunes match. How can I get back to the pre-Match system which let me just use home sharing to stream music from computer to A

    When I click on the Music tab on my Apple TV 2, a message tells me I have to set up iTunes Match to stream music from my iTunes library on my iMac. I don't want to set up and pay for iTunes Match. How can I get back to the pre-Match system which let me just use home sharing to stream music from computer to Aple TV

    Ditto.
    You need to look for your itunes library under Computers and select it, then music.
    Music column is for web based content not local content, just to confuse everyone.
    AC

  • How can I sync my iPhone on a different computer without erasing my applications? My iPhone was earlier synced with a PC which I don't use anymore. Please help with proper steps, if any.

    How can I sync my iPhone on a different computer without erasing my applications? My iPhone was earlier synced with a PC which I don't use anymore.
    On the new computer, I am getting a message that my all purchases would be deleted if I sync it with new iTunes library.
    Please help with proper steps, if any.

    Also see... these 2 Links...
    Recovering your iTunes library from your iPod or iOS device
    https://discussions.apple.com/docs/DOC-3991
    Syncing to a New Computer...
    https://discussions.apple.com/docs/DOC-3141

  • How do I get AVG to scan my Yahoo.mail? AVG currently scans "Outlook" (which I don't use) but can't figure out how to switch that to AVG. Thanks

    Running Firefox 3.5 using AVG Free and Yahoo mail - need to know how to get AVG to scan Yahoo mail and not Outlook (which I do not use).

    Try asking at the AVG forum, that isn't a Firefox support issue.
    http://forums.avg.com/ww-en/avg-free-forum

  • Our family has multiple apple ids and we are setting up a new apple tv. Does it matter which apple id we use if we have home sharing enabled?

    I have an apple id from my mobile me account; I also have the apple id from my itunes account (with which I purchase content for my powerbook); and my husband has an apple id for itunes which he purchases content for his itunes library on his PC.
    Does it matter which apple id we use to set up our new apple tv?
    what issues are caused by my multiple apple ids?

    You cannot merge apple ids, but you can sign out of the apple id and sign in under the other one either on your phone or your mac. On your phone, go to settings, itunes and appstore, tap your apple id, tap sign out, then go back to home screen, then back into itunes an appstore and sign in with the apple id you want to use.

  • How can I tell which clips are currently used in a sequence

    In the Project window there is a list of clips I have loaded, but often I lose track of which clips are currently used in the sequence.  In Premiere Elements there was a green check next to clips you have used in the timeline, but I don't see any indication of which clips are currently used in the sequence/timeline I am editing.
    Is there some way to sort the loaded clips so that the ones in use all appear first followed by those clips not currently being used in the timeline/sequence.  Is there some indication I am missing showing me whether or not a clip I have loaded is currently being used or not?
    -Roger Uzun

    This isn't really a sorting mechanism, but you can see how many times a clip is used, where it's used, and then navigate to it using the following non-descript button:
    You need to have a clip selected in the Project Panel to see this information, of course. Once you click the disclosure triangle, you'll see the list of sequences and the times where the clip is used; if you select one of those references, the sequence will come to the front in the Timeline panel, and the CTI will park at its in point.
    Again, not a sorting means, but it might be helpful in some instances.

Maybe you are looking for