Which of the two monitors do you recommend for Adobe Photoshop Lightroom 5: EIZO CG 277 Coloredge o

HI,
Which of the two monitors do you recommend for Adobe Photoshop Lightroom 5:
EIZO CG 277 Coloredge or NEC PA-272W.
Thanks in advance for your reply.

It depends on where you are. Things are very different in Europe (Italy?) compared to the US situation.
The price difference between comparable NEC/Eizo models in Europe actually goes in Eizo's favor. The regular NEC PA272 in Europe cannot be hardware calibrated (it has a firmware lock) and the comparable offering would be either the NEC Spectraview 272 or the Spectraview Reference 272. These are more expensive than the Eizo CG277.
Note that the European PA272 can be hardware calibrated with the US Spectraview II software - but that software cannot be bought in Europe and has to be imported from the US.
All these displays are top reference quality. As for calibration software, which is a very important part in the equation, my vote goes to Eizo's ColorNavigator (I have a CG246). It is a superb piece of well thought-out software. The US Spectraview II - which I also happen to have - is a very, very close second, but the European Spectraview Profiler software that you get with the EU NEC units isn't all that impressive.
Photoshop supports a 10 bit display pipeline, with either display, as long as you have a video card that also supports it. Lightroom doesn't support it.

Similar Messages

Which 24" monitor do you recommend for my new mac pro?

I just purchased the new macpro. I need to buy two 24" monitors. My budget for each monitor is between $500 and $750. I narrowed down my research to these 3 monitors:
Dell U2413 (Revision A02-manufactured after may 2013)
Nec P242W-BK
Asus PA249Q
Any thoughts or suggestions?
I use Adobe Premiere and After Effects for corporate videos.
Thanks!
Daniel

Hi Daniel
I do exactly the same job and was facing the same issues.
I ended up buying an Asus PA279Q 27 inch Widescreen. Couldn't be happier colour performance is outstanding and the monitor is very well designed also has an anti-glare coating.
Happy hunting
Nick

Which data center you recommended for hosting a websites that targeting the region of Iraq?

I am wondering, Which data center you recommended for hosting a websites that targeting the region of Iraq?
Here is a list of current Azure's data centers:
-US East
-US West
-US North Central
-US South Central
-Europe North
-Europe West
-Asia Pacific East
-Japan East
-Japan West
-Brazil South
Thanks

Hi,
As far as I know, this is determine by your use group, choose the data center that was closest to your use group, you could also use
http://azurespeedtest.azurewebsites.net/ to test the speed.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Which free app for the editing photo do you recommend?

Goodmorning!
I'm new in this community... I have a macbook pro... Which free app for the editing photo do you recommend?

The Gimp - http://www.gimp.org/

Acrobat 9 or Designer 8.2 Which of the two is best program to design a form in.

I have some questions that I would like explained to me (by you long time users)
I have acrobat 9 and designder 8.2.1
1. Which of the two is best program to design a form in.
2. What is the differance between the two in designing a form.(advantages / disadvantages)
3. If I have a word .doc form that I want to make into a pdf, which program is best to open it in to work on, Adobe 9 or designer.
4. If I create a form in Adobe 9 or designer can I open it in either after saving it to continue working on.
TIA
Tony

I think this is a matter of opinion. The drawback of using Designer is that you can no longer edit in Acrobat at all. Those of us that learned in Acrobat, often favor the Acrobat route. In Designer you can import WORD forms and that might be useful at times; however, you can not edit it in Acrobat. Indeed, you can still open the form made in either using Reader or Acrobat. If you want backward compatibility, you need to be careful about saving it as such and not adding capabilities that are new with AA9. Those capabilities will be lost with earlier versions.
The best way is to try it both ways and see what you think. When you buy Acrobat, Designer is part of the package. Thus you have the choice and can try both. Make a sample PDF for creating a form and then make 2 copies. You might even start out with a WORD form. Discover the pros and cons yourself. I have never felt the need to go to Designer and it seems that a lot of folks go there only because that is where the forms menu sends them, not realizing they could have used the TOOLS in Acrobat.

Which of the two models is better to use photo editing and 3D softwares?

Hello,
I intend to buy a Mac, but I'm in doubt between two models. Besides the basic usage I use the computer to edit photos (Lightroom, Photoshop and Illustrator) and construction of 3D objects in software like Solid Works and Rhinoceros.
I am in doubt if I buy one of the models below:
New MacBook Air
1.7GHz Dual-Core Intel Core i7, Turbo Boost up to 3.3GHz
8GB Memory
256GB Flash Storage
Intel HD Graphics 5000
MacBook Pro with Retina Display
2.6GHz Dual-core Intel Core i5 processor, Turbo Boost up to 3.2GHz
8GB Memory
256GB Flash Storage
Intel HD Graphics 4000
What do you recommend for what I do?
Thank you,
Gustavo

If you edit photos and do contractions of 3D objects majority of time, rMBP wil probably better for you.
The main difference between the two is that rMBP performs slightly better and has much more pixels, more ports.
If you don't feel like you need to take advantage of such things, MBA will do a really good job.
However if Display, ports is needed rMBP will be better for you.
From experience, rMBP is way too expensive for the performance so I'm buying the MBA soon.

Which email service do you recommend for macbook pro?

which email service do you recommend for macbook pro? we have an HP desktop with Windows Mail that is sync'd to laptop Mail currently.

Vista is an operating system, Windows Mail is a mail client and Windows Live is an e-mail provider, 3 entirely different things, try this, what does your e-mail address consist of after the @sign?

Which jre & tomcat version do you recommend for this hardware setup?

I have to install a SINGLE JSP application onto an Intel pentium3 windows XP box with 128Mb of RAM clocked at 733Mhz
1. Is this setup sufficient for running tomcat?
2. Which version of tomcat and which JRE do you recommend for this setup?
3. Would I get better performance running Jetty, and if so which version?

The issue of changing native folder hierarchy and/or naming conventions has little to do with solid state media and everything to do with the container and header data that links the audio/video streams with the metadata and thus allows the content or "media essence" to be properly decoded and played. This is the very reason to use a tool like Prelude or Premiere's Media Browser or even Bridge or Lightroom or a third party logging tool like metafuze or shotputpro, or dedicated camera format software such as sony xdcam clipbrowser or panasonic p2 browser, redcine x, ect, as these tools all are designed to parse the captured A/V data and make properly syntaxed edits to the metadata either embedded directly into the media container or in Prelude and Premiere's case can also be written back to a sidecar or associated XMP file, which is a flavor of XML that contains all the original captured metadata plus any changes and/or additions made via these tools.
The dangers come into play when changes to the native file naming convention or folder hierarchy are done directly to the media content via finder on mac or explorer on windows, as changing at that level can break the relationship between the metadata stream and the media essence since the changes are not being written to the metadata or content headers or being handled in a manner referred to as transmuxing..
Prelude & Premiere's Media Browser both allow for looking into the native files non-destructively and safely modifying either the metadata linked to the native media or also allows for a transcode to be done which will then copy or recreate a new media file in whatever format selected along with a new metadata stream.
Prelude is a nice utility and Premiere's Media Browser an amazing tool for organizing, modifying and selectively ingesting media and or making quick selects and assemblies.

SQL*Loader options - which of the two is faster?

Hi, I am loading data into a staging table, using sqlldr. There are no indexes, and the table can be truncated.
the number of rows is known prior to the call, so i can set rows=...
it is a fixed size CHAR/INTEGER record of around 100 bytes.
Oracle is 10g.
Now I am getting following sqlldr warning:
SQL*Loader-281: Warning: ROWS parameter ignored in parallel mode.
Cause: Specifying save points using the ROWS parameter is
not supported for parallel loads.
Action: Remove the ROWS parameter from the command-line
arguments or specify a non-parallel direct load to have save
points performed.
Hence my question is, which of the two is faster?
I could either:
- trigger a direct load with TRUNCATE in the control file, and rows=<total number of rows>
or
- truncate table before loading, trigger a parallel load, APPEND, and give sqlldr potentially separate files in the correct parallellism that it can handle (so, e.g., 16 small files)
thanks
Arne

Hi,
1. Go to WAD.
2. Open any web template ( Search for * analysis )
3. Select one template .
4. Save as ..new name
5. In the data provider change the data provider name and change the report name.
6. test it .
5. If you want to chane the layout and all , go to DHTML code and change as per your requirement .
6. You can directly publish it from Query also ..it is fast .This will directly attach to your portAL.
Regards
Nilesh

Which of the two stores data permanently

pls could someone tell me
which of the two stores data permanently in a stand alone application
Collections or use of JDBC

The JDBC is better, you can have persistent Collections e.g. Berkerley DB but using a Database is more flexible and manageable.
BTW: The berkerley DB has higher performance.

What is the best set up you recommend ?

Hi guys, I had a quick question, I want to know the best set up you recommend. I attend a small church and they have four wireless mic and one mic that is not wireless, majority of the time they just use the one mic that has a cord. They want me to help them upgrade their audio system, they currently have a 6 channel amp and some great sounding speakers. I was going to suggest they get a imac and we run garage band and either use their current amp or get a new inexpensive mixing board, with their current amp or the mixing board I know we will need some type of 3.5mm adapter to plug it into the computer. We would like to record the church sermons as well as load all the church music that are on CD's into the mac and make play list and play those from i-tunes. What do you guys suggest ? I am very familiar with mac and I do a lot of video with FCP and motion, but not much with Audio, I do know soundtrack pro, would that be better to use ? I would like a setup where we can do as much as possible from the computer like open and close mics and adjust mic levels, if not then I can do that from the amp or mixing board with no problem, thanks

What you appear to be describing is sending a stereo track to GB on a Mac using the Mac's built-in input.
There are three issues I see with your system.
One you are limiting it to a stereo track. Using the Mac's built-in input with a 3.5mm plug. And have no way to control individual mic levels from the Mac.
However, you could have the possibility of recording multiple tracks, individual level control and ability to mix those tracks inside of GB or another DAW and a much better sounding recording by adding an audio interface to your setup. Which I believe is the missing ingredient to reach you goals.
Something like a Presonus interface with 8 mic pre's should work fine.
So you would run all church mic's into the interface and record inside of GB and run the analog output from the interface into the amp. Amp to speakers.
However, although I wouldn't have a problem with that setup...you are relying on hard drives and software and a human running it...so there is a dependability factor to consider comparatively.
You may be fine just getting a 2 track digital recorder hooked up to the output of the mic preamp you already have. And transporting that to the Mac later....?
Dunno what you needs are exactly so I can't say....

I have a macbookpro with a second monitor connected using an Apple connector. The two screens show different parts of the desktop. My cat walked across the keyboard, and now the two monitors are showing the same thing. How do I undo what the cat did?

I have a macbookpro with a second monitor connected using an Apple connector. The two screens show different parts of the desktop. My cat walked across the keyboard touching various keys, and now the two monitors are showing the same thing. How do I undo what the cat did?

Have you tried HELP in FINDER? If you open HELP and enter 'displays' in the field in the upper right hand corner you will get a list of topics on setting up monitors. Specifically read 'Setting up multiple displays to show the same image' and 'Setting up multiple displays as an extended desktop'.
Ciao.

I have a MB Pro that is running Lion; I also have two external DVI monitors and a DVI splitter in hopes that I could run the two monitors with my MB Pro. This actually works fine, but I am unable to "extend" the desktop. Any insights?

I have a MB Pro that is running Lion; I also have two external DVI monitors and a DVI splitter in hopes that I could run the two monitors with my MB Pro. This actually works fine, but I am unable to "extend" the desktop. Any insights?

You cannot have a extended desktop using a splitter. All that does is mirror the pair attached to the splitter.
You can do this however using a Matrox DualHead2Go.
Other solution would be to attach one monitor to your video out as you do the splitter and attach the other via USB (assuming the adapter supports the monitor's resolution).
Newer Technology USB to DVI / HDMI / VGA HD Video Display Adapter

HT3910 I face problems with the Nvidia 8800 GS on my iMac 24'' 3.06Ghz intel core duo. OS 10.06.08. What can I do to solve the problem and if you recommend upgrade to mountain Lion

I face problems with the Nvidia 8800 GS on my iMac 24'' 3.06Ghz intel core duo. OS 10.06.08. What can I do to solve the problem and if you recommend upgrade to mountain Lion

If you want to sync it to the iPad from that Mac, you need to upgrade it to at least 10.5.8.
If you want to copy the music to another Mac, you don't. Move the iTunes folder of the item in the Finder's sidebar over as you would any other folder. If you put it somewhere other than the Music folder, launch iTunes with the Option key held down and point it to that location.
(61713)

Which among the two outbound queues has the highest priority?

Hi guys, pardon me for the following questinos, im just a newbie in XI/PI.
1. Which among the two outbound queues has the highest priority, XBTA or XBTM?
2. Can someone elaborate more the difference between the Large outbound queue (XBTM) against the normal (XBTO) and the low (XBTZ) priority queues.
3. If i have alloted an outbound queue for large messages (XBTM), will the messages going out of this queue affect the other queues (high, normal and low)?
4. If messages do get stuck in either the inbound (XBTL) or the outbound (XBTM) queue, will this affect the other queues as well?
Thanks.

Hi Guys,
Can anyone help me to solve this issue.
Regards
Srinivas.

Which of the two monitors do you recommend for Adobe Photoshop Lightroom 5: EIZO CG 277 Coloredge o

Similar Messages

Maybe you are looking for