Which part of the machine is related to the keyboard flex problem ?

Mine is T420s
And I got a keyboard flex problem.
Actually which part is related to this problem ?
Isn't it inclusive to fix this problem in the warranty ?
thx

Mine doesn't exhibit any keyboard flex and I don't think it's a common issue with T420s; anyway:
http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T420s-Keyboard-Flex/td-p/454851/highlight/t...
http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/t420s-keyboard-flex/m-p/755255/highlight/tr...
T420s i5-2520M HD3000 480GB Crucial M500 SSD 8GB RAM Ericsson F5521gw
T430 i5-3210M HD4000/NVIDIA 5400M 512GB Crucial MX100 SSD 12GB RAM Ericsson H5321gw

Similar Messages

When I go on a song on my music on my iPod touch 4th gen I can no longer get the bar across the top of the screen which allows you to change which part of the song you are up to, how do I get it back?

when I go on a song on my music on my iPod touch 4th gen I can no longer get the bar across the top of the screen which allows you to change which part of the song you are up to, how do I get it back?

hello, please install the search reset addon - it will revert the most common customizations those adware programs do in firefox back to the default: https://addons.mozilla.org/firefox/addon/searchreset/

Which parts of the wirless fregment are encrypted by WEP?

which parts of the wirless fregment are encrypted by WEP?
a. payload of data
b. trailer
c. header
d. IV
which two of options are right?

The only portion of the ethernet frame that is encrypted with WEP is the payload. When the frame leaves the ethernet port of the AP, it is no longer encrypted at all. The header of the ethernet frame contains the source and destination MAC addresses, as well as an ethertype/length field.

T60 Fan Replacement - Which part is the right one?

How do I know which fan model number to use? I have a 2613-CTO but on the parts info listing, 2613-CTO matches with 4 different model numbers:
41V9931 (integrated)
41W6406 (integrated)
41V9932 (discrete)
41W6407 (discrete)
How do I know which part is the correct one for my laptop?
Any assistance would be much appreciated, thanks!!!

Any "discrete graphics" fan will do just fine, since that's what you have in that T60.
Hope this helps.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Mba sound: just bought my first mba and I have been using it in my house no problem...took it to my empty office today and I can hear a small vibration/sound coming from the upper left part of the keyboard...constant and rhythmical...ideas?

mba sound: just bought my first mba and I have been using it in my house no problem...took it to my empty office today and I can hear a small vibration/sound coming from the upper left part of the keyboard...constant and rhythmical...ideas?

Hi
It's likely your fan, It always runs on a MBA. Mine is very quiet, others report some noise - here is one link. There are lots of others.
Hope this helps
Cheers
https://discussions.apple.com/thread/4381367?start=0&tstart=0

In which part of the page i can write java script

Hi
I'm new with ADF and web development
I have a java script function that show a tooltip.
This is the function:
*function positionTip(evt) {*
*     if (!tipFollowMouse) {*
*          standardbody=(document.compatMode=="CSS1Compat")? document.documentElement : document.body*
*          mouseX = (ns5)? evt.pageX: window.event.clientX + standardbody.scrollLeft;*
*          mouseY = (ns5)? evt.pageY: window.event.clientY + standardbody.scrollTop;*
*     // tooltip width and height*
*     var tpWd = (ie4||ie5)? tooltip.clientWidth: tooltip.offsetWidth;*
*     var tpHt = (ie4||ie5)? tooltip.clientHeight: tooltip.offsetHeight;*
*     // document area in view (subtract scrollbar width for ns)*
*     var winWd = (ns5)? window.innerWidth-20+window.pageXOffset: standardbody.clientWidth+standardbody.scrollLeft;*
*     var winHt = (ns5)? window.innerHeight-20+window.pageYOffset: standardbody.clientHeight+standardbody.scrollTop;*
*     // check mouse position against tip and window dimensions*
*     // and position the tooltip*
*     if ((mouseX+offX+tpWd)>winWd)*
*          tipcss.left = mouseX-(tpWd+offX)+"px";*
*     else tipcss.left = mouseX+offX+"px";*
*     if ((mouseY+offY+tpHt)>winHt)*
*          tipcss.top = winHt-(tpHt+offY)+"px";*
*     else tipcss.top = mouseY+offY+"px";*
*     if (!tipFollowMouse) t1=setTimeout("tipcss.visibility='visible'",100);*
My ADF page source code is
*<?xml version = '1.0' encoding = 'windows-1252'?>*
*<page xmlns="http://xmlns.oracle.com/uix/controller"*
xmlns:ui="http://xmlns.oracle.com/uix/ui"
xmlns:data="http://xmlns.oracle.com/uix/ui"
xmlns:ctrl="http://xmlns.oracle.com/uix/controller"
xmlns:html="http://www.w3.org/TR/REC-html40" expressionLanguage="el"
xmlns:myTemplate="selfservice">
*<templates xmlns="http://xmlns.oracle.com/uix/ui">*
*<templateImport source="mainTemplate.uit"/>*
*</templates>*
*<content>*
*<dataScope xmlns="http://xmlns.oracle.com/uix/ui">*
*<provider>*
**
*</provider>*
*<contents>*
*<document>*
*<metaContainer>*
**
*<head title="General Manager"/>*
*</metaContainer>*
*<contents>*
*<body>*
*<contents>*
*<form name="form0">*
*<contents>*
*<myTemplate:SelfService title="General Manager">*
*<contents/>*
*<tabs/>*
*<pageButtons/>*
*<globalButtons/>*
*<pageHeader/>*
*<start/>*
*<end/>*
*<about/>*
*<copyright/>*
*<privacy/>*
*<corporateBranding/>*
*<productBranding/>*
*</myTemplate:SelfService>*
*<formValue name="${bindings.statetokenid}" value="${bindings.statetoken}" id="_uixState"/>*
*<table model="${bindings.HrsVEmpPhonesView1}" id="HrsVEmpPhonesView13" partialRenderMode="multiple" partialTargets="_uixState" showAll="yes" width="900">*
*<contents>*
*<column>*
*<columnHeader>*
*<sortableHeader model="${ctrl:createSortableHeaderModel(bindings.HrsVEmpPhonesView1,'EmpNameAr')}"/>*
*</columnHeader>*
*<contents>*
*<textInput model="${uix.current.EmpNameAr}" columns="10" readOnly="true" onMouseOver=""showTooltip(event,'This is a tooltip with a transparent shadow effect. Can you see the letters underneath the shadow?');return false""/>*
*</contents>*
*</column>*
*<column>*
*<columnHeader>*
*<sortableHeader model="${ctrl:createSortableHeaderModel(bindings.HrsVEmpPhonesView1,'JobDescr')}"/>*
*</columnHeader>*
*<contents>*
*<textInput model="${uix.current.JobDescr}" columns="10" readOnly="true"/>*
*</contents>*
*</column>*
*<column>*
*<columnHeader>*
*<sortableHeader model="${ctrl:createSortableHeaderModel(bindings.HrsVEmpPhonesView1,'PhoneExt')}"/>*
*</columnHeader>*
*<contents>*
*<textInput model="${uix.current.PhoneExt}" columns="10" readOnly="true"/>*
*</contents>*
*</column>*
*<column>*
*<columnHeader>*
*<sortableHeader model="${ctrl:createSortableHeaderModel(bindings.HrsVEmpPhonesView1,'CntCellPhone')}"/>*
*</columnHeader>*
*<contents>*
*<textInput model="${uix.current.CntCellPhone}" columns="10" readOnly="true"/>*
*</contents>*
*</column>*
*<column>*
*<columnHeader>*
*<sortableHeader model="${ctrl:createSortableHeaderModel(bindings.HrsVEmpPhonesView1,'CntHomePhone')}"/>*
*</columnHeader>*
*<contents>*
*<textInput model="${uix.current.CntHomePhone}" columns="10" readOnly="true"/>*
*</contents>*
*</column>*
*<column>*
*<columnHeader>*
*<sortableHeader model="${ctrl:createSortableHeaderModel(bindings.HrsVEmpPhonesView1,'IaigcEmail')}"/>*
*</columnHeader>*
*<contents>*
*<textInput model= "${uix.current.IaigcEmail}" columns="10" readOnly="true"/>*
*</contents>*
*</column>*
*</contents>*
*<tableSelection/>*
*</table>*
*</contents>*
*</form>*
*</contents>*
*</body>*
*</contents>*
*</document>*
*</contents>*
*</dataScope>*
*</content>*
*<handlers>*
**
*<event name="goto sort" source="HrsVEmpPhonesView13">*
*<invoke method="handleTableUiEvent" javaType="oracle.cabo.adf.rt.AdfUtils">*
*<parameters>*
*<parameter javaType="oracle.adf.model.binding.DCIteratorBinding" value="${bindings.HrsVEmpPhonesView1Iterator}"/>*
*<parameter javaType="oracle.cabo.servlet.expl.ControllerImplicitObject" value="${uix}"/>*
*</parameters>*
*</invoke>*
*</event>*
*<event name="select" source="HrsVEmpPhonesView13">*
*<set target="${bindings.HrsVEmpPhonesView1Iterator}" property="currentRowIndexInRange" value="${ui:tableSelectedIndex(uix, 'HrsVEmpPhonesView13')}"/>*
*</event>*
*</handlers>*
*</page>*
I want to add this function to my page
In which part exactly i can write this function
thanks in advance

To add to this, if you prefer you can separate your JavaScript from your JSF pages.
Add a folder (I named mine 'js') to your application's ViewController project's public_html folder.
Via JDeveloper, create a new JavaScript file inside your newly created folder and place your JavaScript functions inside it.
You can then 'load' the .js file using the method Shantala described, with the addition of an added 'source' property to the af:reference tag.
(This can also be a URI reference to a JavaScript file hosted on a web server)
<f:facet name="metaContainer">
<af:resource source="/js/myJsFile.js" type="javascript"/>
</f:facet>The benefits of this 'split' are cleaner JSF page source and also code-highlighting and formatting within the .js file making finding and fixing bugs in your JavaScript much easier.
It appears however, that when using <af:resource> to load scripts, once the page has been submitted even once, the JavaScript is no longer available to the page. Which isn't very useful.
A solution is to use <trh:script>.
Add xmlns:trh="http://myfaces.apache.org/trinidad/html" to your <jsp:root> tag and install the library.
then in place of the above code use:
<f:facet name="metaContainer">
<trh:script id="script1" source="/js/myJsFile.js"/>
</f:facet>Now after a page submit the JavaScript still functions.
Edited by: Matthew Carrigy on 12/08/2009 10:39

RegEx: How to find out which part of the pattern failed?

Hi there,
I was wondering: is there any way to find out where the pattern matching failed?
Say I got the string "John Paul Yoko Ringo", and I want to match it against the pattern /John Paul George Ringo/.
I would like to know something like "pattern failed at index 11", or if I had groups something like "matching group 3 failed".
Is there any way to do this? Thanks in advance!
Best regards,
- Torben

jschell wrote:
I would like to know something like "pattern failed at index 11", or if I had groups something like "matching group 3 failed".
Is there any way to do this? Thanks in advance!
I wonder if that is reasonable. It means that the parse tree for the regex would need to keep mapping information.
At a minimum it is going to require an array, not a single result, because a regex can 'fail' in many ways.
Consider the following regex with the following input
/(a|b)d/
abababababx
Where does it 'fail'?Right. If you just want the character position at which it failed, those tools might tell you that as part of a bigger picture. But by itself, without any context, that number's not necessarily meaingful. A given character can be examined many times due to backtracking. Part of the expression could succeed for part of the input, then the expression might fail for the rest, so we backtrack, and may get several more failures, then more partial successes, all at different points, then ultimately it may fail anywhere within the input.
So just knowing where isn't enough. You need to know what steps were taken to get there. I do think these tools provide that, though I haven't looked closely.

Replace T410 motherboard, but which part is the right one?

Greetings
I have a T410 2516-ADU and need to replace the blown motherboard, hopefully from eBay. I'm looking at the "parts" section of the relevant lenovo support page, where it lists 2 different boards: 75Y4066 and 60Y5713
Can I use either one? Is one better than the other? How do I know?
Any guidance will be very welcome
Thankyou
ThinkPad T410 (2516-ADU)

Thanks for the reassuring info. When I turn on the computer I get a few green flashes of an LED light on the keyboard and that is it - nothing further. Digging around on the forums and elsewhere it apears that this is likely caused by a motherboard failure? I am on assignment in West Africa at the moment, and am hoping to get the laptop (which I left in the States), shipped out to me with a replacement board so I can attempt the fix. Unfortunately that means I can't take the board out and send it to you for a swap-out, but thanks for the offer

Hello, how much did you pay when some parts of the keyboard keys are not working properly due to accidental spilt of tea?

I accidentally spilt a tea on the keyboard of my Macbook Air 11'. I managed to wipe the keyboard and saved my laptop. However, I noticed that the Spacebar, Shift and Command keys are not working as it should be. It's like something's stuck inside that makes these keys hard to press as usual. I refered this problem to Amsys, Berwick St London, as the reservations in Apple Stores are full. Do you have any idea how much is the cost for diagnosis and repair if ever?
Please help.

if you spilled a good bit of tea, its a serious problem, yes.
it got inside, and will corode, and bad things will begin to happen.
Liquid spills, why your MacBook chassis is a one-way valve for spills
After a substantial spill many people will turn their notebook upside down and shake it, not only does this not work, but it spreads liquid havoc throughout your machine and makes things often as bad as possible.
The keyboard itself acts like a one way valve in the case of a substantial liquid spill. While liquid pours into the bottom chassis easy, it does not come out easily at all, and in the case of any spill, most of it will not come out by turning it upside down. Disconnect all power and contact Apple for diagnostics and repair.
Do not attempt to, after a spill, ‘dry out your MacBook’ and test it
After a spill most people invariably try to “dry out” their notebook by various methods, including hair dryers and otherwise. This both does not work, and after a substantial spill of any magnitude, even if the liquid was water, residue is left behind.
There are additionally many very tight places inside your notebook where liquids will linger for a very long time, and cause corrosion or worse.
Immediately unplug your notebook and contact Apple for in shop diagnostics and parts replacement.
In the case of very minor spills people will “dry out” their notebook and feel success that their notebook is working ok, however invariably in nearly all instances after 4-14 days an error / fault pops up and is usually followed by more.
In case of a spill, damage estimates are impossible,.....anything can be fixed, without question.......the question is cost.
contact Apple for in shop diagnostics and cost estimation ....possible parts replacement.

I recieved my brand new mac today, im on the start up bit but my keyboard refuses to connect with the mac?The mouse is fine, but i cant get past the 'create your comuper account' part as the keyboard just wont connect? ugh what do i do

?

Did you turn on the keyboard by pressing the round side button (right side, I think) such that the green light starts to blink? Then open Blue Tooth preferences in order to pair the keyboard to the computer.

Do new MBPs still have the keyboard "delay" problem?

Since the MBP software update does not seem to have resolved the issue of the keyboard "skipping" or "delaying" letters as I write, I wonder if this problem has somehow been fixed in the newest MBPs. And if so, whether it's been determined that it is a logic board issue, in which case I may bring my MBP back for replacement.
Thank you for your help!

good question... searching these threads and on google will tell you all sorts of stories...
a lot of people are convinced it is a hardware problem, which it could be, but I do not experience delays or intermittent issues and/or missing first letters all the time, particularly not in Windows Vista (which is unfortunately not a good sample enough to quantify, I rarely use Vista on my Mac).
I have noticed no issues via my wireless bluetooth keyboard, mind you (perhaps a hint at the improper hardware under the laptop keyboard?).
As some users have reported, having the keyboard replaced might changed the results, but it is a wild guess, since some still have the problem...
Basically, this issue is far from resolved, is absolutely irritating, and has been known for a while. Another problem is that visiting an Apple Store may induce the humiliating experience of not being able to replicate the issue... I have brought mine in and some super nice Genius dude wrote about two paragraphs in TextEdit non-stop without even one single mishap... How embarrassing.
He did believe me though, whilst he also claimed he had never heard about the issue. He offered to replace the keyboard in the laptop and the USB controller managing inputs and feedback from it, thinking like me that it could be anything between USB, keyboard, or the connections between them that might be faulty (an hypothesis raised many times over these discussion boards).
I'm still unconvinced, and have not made a move. Mind you, I have a 3-years Apple Care coverage, and I could wait until three years from now if I wanted to, the way it works... This Mac I have is almost 3 months old, and I'm very sad I installed Leopard too, by the way. It is waaaaay slower than Tiger...
Anyhow, I still wait on the software hypothesis, and hope for a patch... (one that works, that is, some other keyboard issues are "supposed" to have been fixed).
Patience is a virtue, and I can't really lose my computer for any number of days, I need it every day for work and studies, and no, using another computer in the meantime is impossible (I have some hardware-locked data and programs that are more expensive than all the Macs I have owned together... And they are, hmm, involved in a sensitive sector of information...)
Cordially,
Dr Sly

Is the Keyboard My Problem?

I just RMA'd my board because it randomly shut down in windows and refused to power back on. I mean absolutely no power would go into the system. I tested the PSU, video card, and ram. Could it have been my keyboard? I just read the thread on it...do incompatible keyboards cause the computer to not post or to actually not turn on at all. I have an Antec keyboard that came with my old Alienware. It's pretty generic looking.

This is a serious issue and should be made sticky I agree!
I am having the same problems with the keyboard causing non boot, or the keyboard not functioning (it is a generic PS2 keyboard).
The IO plate is not fowling anything as far as I can tell, there are no shorts that I can see (im still to try the card outside of the box but its a big hassle to get it out of course)
It seems to get stuck in some mode (either all LEDs on or off), and then sometimes boot.
I tried a USB keyboard once, but that didn't seem to help (couldnt get into the BIOS with the DEL key).
The strange thing is on my K8N NEO2 Platinum, the PS2 keyboard works intermittantly.. at first it didnt work, then it suddenly started to work, and now it doesnt work at all!
I will try another type of keyboard tonight and hopefully that might shead some light on the problems.
I also seem to get a power down suddenly for no reason.
It's not sounding so hopefull is it.
Darel

How do I use cookies to control which part of the timeline to play from?

Hi there,
I have created an animation with Adobe Edge. My site uses Concrete5 and I am pulling in the Edge content into an IFRAME on my home page (there my be a better way to do this and I'm open to suggestions). I want the animation to play from the start when someone first visits the site, but if during their browser session they navigate back to the home page, I want the animation to only play a shorter segment of frames near the end.
My question is, how do I use cookies to acheive this? I'm new to javascript/jquery.
I've included the following code on compositionReady, (found in another post on this forum) but don't have a clue how to continue...
// insert code to be run when the composition is fully loaded here yepnope( { nope:[ '/js/jquery.cookie.js' ], complete: init } ); function init() { //create your cookie's initial values here }
My temp site is here - http://79.170.40.43/nutcrackerdesign.co.uk/
On revisting the homepage, I only want to play from when the green 'How can we help?' button drops in.
Many thanks!
Russ

Hi, Russ-
I found this article, which seemed really helpful in describing how cookies work in JavaScript:
http://www.quirksmode.org/js/cookies.html
Remember that JS works just fine within Animate, so on your compositionReady, you can read your cookie and then set the play based on that. You should probably uncheck the autoplay for your Stage and control the play of your Stage from the compositionReady.
Good luck!
-Elaine

Is the new mac pro 2014 upgradable? if so which parts?

I am a Video editor and graphic designer. i want to know how far can i expand the new mac pro 2014.. which parts on the machine are upgradable.

It is actually "Late 2013" in Apple parlance. Most use "nMP" for New Mac Pro" or you could call it a 6,1
There is no sign or confirmation that the Dxxx can be upgraded unless from another nMP, doubt there will be upgrades while SSD etc are and Apple shows how on product support page how to remove and install memory and the SSD device.

Which one is the reliable drive?

I saw 2 external hard drives on close out and was wondering which one is considered more reliable? One is the G-drive desktop and the seagate backup for Mac which looks like the go flex except it has a 800 FireWire. I'm leaning towards the G-drive because of the on off switch and 2 FireWire while the seagate has one FireWire and no switch. From the review I read both have complains on reliability although much more on the G-drive which is sold at apple store and supposedly recommended by their employees. I want to make the right decision and would appreciate anybody on this board who had any experiences with these drives please share them here. Thanks.

Tee Jay wrote:
Den.thed, are you indicating that the Mercury although slightly more expensive than G-drive is the better quality among the three?
No I can not recommend that one is better quality than the other.
I can however say that I prefer having two or more smaller backup drives verses having 1 large backup drive because nobodies hardware is 100% free from failure.
Likewise it really depends on having a good backup strategy and how important your data is to you. For example if you had only a 2T for Time Machine and it failed then your backups are gone. Plus you can not boot and run from Time Machine if your internal fails. Whereas if you had for example a 500GB or 1T for Time Machine and a 500GB for cloning, you have two backups and can boot and run from the clone if your internal fails.
Have a look at > My backup plan: Dan Frakes | Macworld and then decide if you still want one 2T drive or perhaps if maybe a couple of 500GB drives or a 500GB and a 1T might be the better choice.

Which part of the machine is related to the keyboard flex problem ?

Similar Messages

Maybe you are looking for