Which parts of iCloud will use up data if not connected to wifi?

Just started really actively using it today and was just wondering..

You cannot access two different Wireless points at the same time.. so you simply cannot do this without spending some money.
You can get a wireless usb stick for the Mac.. so you have two wireless clients.. setup the secondary wireless which will use the TC with a static address.
Or you can join the TC to the neighbours network.. so everybody can use use it.. maybe not the best idea.. also incredibly slow.
You can buy a wireless bridge device and stick that in front of the TC.. eg you can use an Express.. as bridge with ethernet connection to the TC.. and then the TC can act as both wifi and storagae for your network.. you may have double NAT issues or again anyone can access the TC that is using the neighbours network..!!
That is all I can think of.. you can build variations around it.. ie you can buy a different wireless bridge device and hopefully the neighbour does know you are bumming his wireless.. and would setup wds on his router.. or maybe not.
Having two wireless clients ie a wireless usb stick in the laptop is the easiest.

Similar Messages

  • Have upgraded to IOS 7 now my phone will not switch to cellular data when not connected to WiFi.

    phone will not switch to cellular data since upgrading to IOS 7. Have checked setting and everything is set to use data.

    Hello berkshireds,
    I would be concerned too if my iPhone only connecting to the Internet when connected to Wi-Fi. I recommend following the steps in the following article to assist with your cellular data connection:
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/ts3780
    Thank you for posting in the Apple Supprot Communities.
    Best,
    Sheila M.

  • HT1212 Hi, one of my daughters friends tried to access her ipod causing it to become disabled; i do not want her to lose all her photos, she accesses my itunes account which is on ICLOUD, will she lose all her data - can this be fixed?

    Hi, one of my daughters friends tried to access her ipod causing it to become disabled; i do not want her to lose all her photos, she accesses my itunes account which is on ICLOUD, will she lose all her data - can this be fixed? I do not think it has been synced with a computer before.

    Disabled
    If you previously synced to the computer then you may be able to recover use of the iPod without erasing the iPod by following the instructions here:
    Disabled Recovery-must use syncing computer.
    Otherwise y will have to restore and thus erase the iPod
    You can restore from backup
    If not in backup then:
    - If you used PhotoStream then try getting them from your PhotoStream. See that topic of:
    iOS: Importing personal photos and videos from iOS devices to your computer
    - Maybe from the restored iPod via How to perform iPad recovery for photos, videos
    Wondershare Dr.Fone for iOS: iPhone Data Recovery - Wondershare Official     
    http://www.amacsoft.com/ipod-data-recovery.html
    -iPod touch Deleted Photo Recovery Tips You Should Know
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
    If you previously synced to the computer then you may be able to recover use of the iPod without erasing the iPod by following the instructions here:
    Disabled Recovery-must use syncing computer.

  • I am travelling overseas and want to transfer photos from my iPhone to the iPad using iCloud. will this incur data roaming costs?

    i am travelling overseas and want to transfer photos from my iPhone to the iPad using iCloud. will this incur data roaming costs?

    Yes, unless you are connected to free Wi-Fi.

  • Which parts of iWeb will not work on third-party servers?

    Hello,
    I'm migrating my site so some new parts
    I would like to know exactly which parts of iWeb will not work on third-party servers.

    Features Unavailable When Publishing to a Non-Mac Server:
    ◼ Password protection
    ◼ Blog and photo comments
    ◼ Blog search
    ◼ Hit counter
    From iWeb 3's Help
    In addition, unless iWeb is modified by Apple or yourself the forward, back, pause and play buttons of the iWeb slideshows will not display once the MMe servers are taken off line: 
    However, if you follow the directions in this tutorial you can work around that: #26 - How to Modify iWeb So Popup Slideshows Will Work After MobileMe is Discontinued.
    OT

  • If I'm overseas, and I use iMessage not connected to wifi, and I'm messaging someone who has an iPhone as well with ios 7, will get charged SMS/mms fees?

    if I'm overseas, and I use iMessage not connected to wifi, and I'm messaging someone who has an iPhone as well with ios 7, will get charged SMS/mms fees?

    No, but cellular data will be used at whatever international roaming rate you carrier charges for data in whatever country.
    Exchanging iMessages requires the same thing as email - an available internet connection. SMS/MMS is completely separate from iMessage.

  • HT1695 If I am using my iPhone whilst not connected to my home wifi, will it cost me to use the internet?

    If I am using my iPhone whist not connected to my home wifi, will it cost me to connect to the internet?

    That depends on the Cellular Plan / package you have for the phone.  Some Plans include a certain ammount of data transfer in the cost of the phone package. If you have one of those then you have the specified ammount of data transfer to use the internet. If you go over you get charged extra.
    If your plan is a Phone only plan with no Data package, then yes Internet will cost extra to whatever you already pay for the phone service.
    Your best bet is to talk to your cellular carrier to make sure what type of Cellular package you have.

  • Mac OS X will not connect to wifi, airport is broken, will connect to internet with ethernet cord. Is there an accessory I can buy to replace airport so I don't have to use ethernet cord? Please help!!

    Mac OS X will not connect to wifi, airport is broken, will connect to internet with ethernet cord. Is there an accessory I can buy to replace airport so I don't have to use ethernet cord? Please help!!

    Since the MacBook Pro currently works, you should put it next to the iMac and compare the network settings for AirPort in System Preferences Network pane Advanced. Also, if you want to start off with the default network settings, you can use Location drop down menu and select +Edit Locations+. Then click the plus sign to create a new location. Set up that new location.
    On System Preferences Network pane, AirPort should appear at the top of the list (in the sidebar). To change the service order, click on the gear icon and select +Set Service Order+.
    Some additional tests you can try, on top of seeing if it works with (1) WEP security disabled and (2) a direct wired connection to the router.
    If you get it to work with either (1) or (2), be sure to run Software Update at least two times to apply any recent updates from Apple. See if that makes any difference to using AirPort with WEP back on.
    (3) Start up in Safe Mode
    http://support.apple.com/kb/HT1455
    I don't know if any third-party software has been installed on the iMac at this point, but Safe Mode will start up with only the essential Apple extensions and processes running. See if it works any better in Safe Mode.
    (4) Create a new admin user account in System Preferences Accounts pane
    http://docs.info.apple.com/article.html?path=Mac/10.6/en/8235.html
    Log out and log in to the new account. Try connecting with AirPort in the new account.
    (5) Connect the MacBook Pro to the router with a wired Ethernet connection. Make sure its Internet access works. On System Preferences Sharing pane, set it up for +Internet Sharing+ so that it is set to +Share your connection from Ethernet - To computers using AirPort+. On the iMac, try to connect to that wireless network and access the Internet.
    That last one (5) may be a good one to try first. It would at least show that the iMac's AirPort is working - you can even set it up to use WEP. If you have any questions about using the +Internal Sharing+ feature, please ask.

  • I will using of firefox but not working shortcut key of website.

    I will using of firefox but not working shortcut key of website.
    It's working in chrome and I.E.

    Check the connection settings.
    *Tools > Options > Advanced : Network : Connection > Settings
    *https://support.mozilla.org/kb/Options+window+-+Advanced+panel
    If you do not need to use a proxy to connect to internet then select "No Proxy" if the default "Use the system proxy settings" setting doesn't work.
    See "Firefox connection settings":
    *https://support.mozilla.org/kb/Firefox+cannot+load+websites+but+other+programs+can

  • I'm travelling and trying to back up my new iPhone to iCloud. I have sufficient storage, am connected to wifi and it's plugged into a power source and yet it doesn't seem to work. Can anyone suggest what I'm doing wrong?

    I'm travelling and trying to back up my new iPhone to iCloud. I have sufficient storage, am connected to wifi and it's plugged into a power source and yet it doesn't seem to work at all. I'm currently in India. Could that be the cause or can anyone suggest any reason why this wouldn't work?

    "gets stuck" - are there any error messages?
    If you get the error "Backup not successful" and you've tried deleting the last backup and trying to back up manually without luck, try the following test:   Go to...
    Settings>iCloud>Storage & Backup>manage Storage, tap your device name in the Backups section, then look under Backup options.  Turn off all apps from backup and then do a manual backup.  If that doesn't work, then this post will not help.  If the backup works, then go back to the app list and turn some on and try another backup.  If successful, keep repeating these steps.  If it fails at some point, then try to zero in on the one app that seems to make the backup fail.  (I had this problem and found one app failing, probably due to a corrupt data file.)
    This process will take time, but if a backup works with no app data being used but clearly fails with the original settings, then somewhere in the mix of apps is a "bad" one.

  • Macbook will not connect to wifi, an environmental issue with wifi?

    Macbook running OSX 10.85 will not connect to wifi, Apple support thinks it could be an environmental issue.  Am connected to wifi right now in recovery mode.  Has this happened to anyone else?  What did you do to correct the issue?  Also, 2 iPhones and an iPad connect without issues.

    Back up all data before making any changes.
    Step 1
    Take all the applicable steps in this support article. If you're running OS X 10.8.4 or later, run Wireless Diagnostics and take the remedial steps suggested in the summary that appears, if any. The program also generates a large file of information about your system, which would be used by Apple Engineering in case of a support incident. Don't post the contents here.
    Step 2
    Run Software Update and install all available updates for OS X or your computer's firmware.
    Step 3
    If you're not using a wireless keyboard or trackpad, disable Bluetooth by selecting Turn Bluetooth Off from the menu with the Bluetooth icon. If you don't have that menu, open the Bluetooth preference pane in System Preferences and check the box marked Show Bluetooth in menu bar. Test. Continue if you find that Wi-Fi is faster with Bluetooth disabled.
    From that same menu, select Open Bluetooth Preferences. If the box labeled Discoverable is checked, uncheck it. Click the Advanced button, and in the sheet that opens, uncheck the top three boxes, if any are checked. Click OK. Enable Bluetooth and test again.
    If the application called "Bluetooth Setup Assistant" is running, quit it. Note: this is not applicable to OS X 10.9 or later.
    Step 4
    This step will erase all your settings in the Network preference pane. Make a note of them before you begin, and recreate them afterwards. It may be helpful to take screenshots of the preference pane.
    Triple-click the line below on this page to select it:
    /Library/Preferences/SystemConfiguration
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu.* A folder should open with an item named "SystemConfiguration" selected. Move the selected item to the Trash. You may be prompted for your administrator password.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
    Step 5
    Reset the System Management Controller.
    Step 6
    Make a "Genius" appointment at an Apple Store, or go to another authorized service center.
    Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional — ask if you need guidance.
    If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present. 
    Keeping your confidential data secure during hardware repair
    *An SSD doesn't need to be zeroed.

  • My imac will not connect to wifi what so ever. i have tried 3 different routers and all my other apple devices work fine. when i take it to the genius bar it seems to work with apples instore wifi. thus leading the "geniuses" to say nothing is wrong.

    my imac will not connect to wifi what so ever. i have tried 3 different routers and all my other apple devices work fine. when i take it to the genius bar it seems to work with apples instore wifi. thus leading the "geniuses" to say nothing is wrong.

    Back up all data before making any changes.
    Step 1
    Take all the applicable steps in this support article.  
    Step 2
    If you're running OS X 10.8.4 or later, run Wireless Diagnostics and take the remedial steps suggested in the summary that appears, if any. The program also generates a large file of information about your system, which would be used by Apple Engineering in case of a support incident. Don't post the contents here.
    Step 3
    If you're not using a wireless keyboard or trackpad, disable Bluetooth by selecting Turn Bluetooth Off from the menu with the Bluetooth icon. If you don't have that menu, open the Bluetooth preference pane in System Preferences and check the box marked Show Bluetooth in menu bar. Test. Continue if you find that Wi-Fi is faster with Bluetooth disabled.
    From that same menu, select Open Bluetooth Preferences. If the box labeled Discoverable is checked, uncheck it. Click the Advanced button, and in the sheet that opens, uncheck the top three boxes, if any are checked. Click OK. Enable Bluetooth and test again.
    If the application called "Bluetooth Setup Assistant" is running, quit it.
    Step 4
    This step will erase all your settings in the Network preference pane. Make a note of them before you begin, and recreate them afterwards. It may be helpful to take screenshots of the preference pane.
    Triple-click the line below on this page to select it:
    /Library/Preferences/SystemConfiguration
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu.* A folder should open with an item named "SystemConfiguration" selected. Move the selected item to the Trash. You may be prompted for your administrator password.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
    Step 5
    Reset the System Management Controller.
    Step 6
    Make a "Genius" appointment at an Apple Store, or go to another authorized service center.
    Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional — ask if you need guidance.
    If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present. 
    Keeping your confidential data secure during hardware repair
    *An SSD doesn't need to be zeroed.

  • Using FaceTime and iMessage when connected to wifi - am I correct this is free and not charged by mobile supplier?

    Using FaceTime and iMessage when connected to wifi - am I correct this is free and not charged by mobile supplier?

    FAcetime and imessage uses internet connection. If you are turning it on only when you are connected to wifi then it is free. However if you leave it on and you are already away from the network then it will be using your data which is provided by your carrier. It will be costly then

  • My 6 day old touch will not connect to wifi .

    My 5 day old touch will not connect to wifi. I have reset everything. Tried different networks.  I am willing to do a full restore but because I have no internet I can't turn "find my ipod off"
    It worked when I first opened it then it kept disconnecting. I reset "all network setting" and rebooted my router and it would connect.  Now it will not connect at all
    On my ipod it finds the network and when I try to put in password it say "incorrect password"

    Then restore the iPod using the following
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Forgot passcode or device disabled
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:                                                             
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:                         
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • Since updating my airport utility app to iOS 8, it can no longer see my base station and will not connect to wifi.

    Since updating my airport utility app to iOS 8, it can no longer see my base station and will not connect to wifi. My son's 4s with an older version of the app sees it and connects fine, so I know it's working. The internet works fine for everyone else in the house but my

    Please take a look at this Apple support document to see if it help solve your issue:
    iOS: Troubleshooting Wi-Fi networks and connections
    If this does not help, we would recommend that you post in the iPhone community support area, since you have an iPhone / iOS issue. The link is just below.
    Using iPhone

Maybe you are looking for

  • How to create a blank field parameter for lenth 400 char

    hi, in my coading i want selection-screen skip 1. selection-screen begin of line. parameters:select1 like dd02l-tabname ,             a(400) . selection-screen end of line. but in selection screen the lenth of a coming only up to 45 char. i want at l

  • High CPU usage with Coherence 3.5.0 cluster node

    We're noticing sustained high CPU usage on one of our Coherence nodes - this happens after running a job that pretty intensively interacts with the cache. The jobs complete, however we still see the Coherence process using approximately the equivalen

  • Printing an iframe with pdf using javascript is not working in IE8 and above

    I have a problem with printing and Iframe with PDF in IE 8 and above Following is my javascript: var urlValue="";//Path of the file to be printed var div = document.getElementById("printerDiv"); div.innerHTML = '<iframe src="' + urlValue + '" id="fra

  • JMS Dequeue issue -- OSB

    Hi, We have created a JMS Queue in WLS 10.3.0 and OSB (10.3.1) process is using proxy service - JMS transport to dequeue messages. WLS JMS Queue -->OSB Proxy --> Business Service (JCA Db adapter) to insert data into a table IF error in db --> Invoke

  • IPhoto vs Picasa - Referenced vs Managed

    I want to use one of these 2 sw tools for managing our iPhone photos. My jpg folder container has 6 GB of photos. When I import these photos in iPhoto as a managed library - resulting library weighs in at around 13.31 - so twice as much as original r