Which processes are happened during App server starting?

Hi..
I think that the S1AS 7.0 starts more slowly than the early version. So I want to know which processes are happened during App server instance and Administrative server starting.
Please let me know the detail description about that.
Thank you.

Hi..
I think that the S1AS 7.0 starts more slowly than the early version. So I want to know which processes are happened during App server instance and Administrative server starting.
Please let me know the detail description about that.
Thank you.

Similar Messages

  • N97 gone berzerk! Which processes are running?

    Weirdest thing. My 5-month-old N97 had pretty much settled into my routine and the battery was lasting most of the week. Leave charging on Sunday night and would last the week if I didn't get too eager with the GPS or camera.
    Last Moday we finally got the Maps 3.4 update available OTA and Nimbuzz was offering an update as well, so I backed up with PC Suite and upgraded. By Wednesday morning, the battery was down to 2 bars, so I recharged. By Thursday, the battery was dead again! Something is running on the phone and draining it!!
    So, besides holding down the silver selector button to see the apps that are running, is there any way to determine which processes are being executed? Even if it entails having to install some utility or something. I am explicitly quitting all listed applications, yet something is killing the battery.

    "is there any way to determine which processes are being executed?"
    JbTaskman, Handy taskman,
    Previous Phones: 6600, 7610, 6230, 6230i, 1100, 1112, N70, N73, N95, N95 8GB, 5800XM, 5230, C5, iPhone 3GS, SE Xperia X10, N900, N8, SE Xperia Arc
    Current Phones: Nokia N9, iPhone 4

  • How to determine which processes are using a module?

    I want to find out which processes are using a kernel module.
    However this info is shown neither with ``lsmod'' nor in
    /sys/modules/<mod_name>/.
    It's needed to reload certain modules which are acting buggy,
    in a bash script. Right now I just keep a list of processes which
    use the module and try to kill'em all, not exactly a beautiful
    solution.
    To work around it I compiled a kernel with
    ``CONFIG_MODULE_FORCE_UNLOAD=y'', however actually
    trying to unload anything with this results in an unstable system.
    Suggestions?

    After successfully syncing the configuration database I ran the configuration compliance job once more, however with the same (misleading) results. Cross-checking the configuration reveals that none of the devices marked as compliant are actually having the "ip helper-address" configured.
    Maybe it is something wrong with the input data I specified for the compliance template (ref step 1-6 in my first post)?
    Or maybe the Compliance Jobs arent the best ways to determine whether or not my devices are having the "ip helper-address" configuration defined?

  • How to determine from PL/SQL which processes are running

    Hi,
    I would like to find out which processes are runing. Is there any way how to determine this directly from PL/SQL? I know I can run external C libraries, but if there is another way, that would be great.
    Thanks for help, Dan

    Rahul India wrote:
    YOu might want to check these
    http://www.dba-oracle.com/plsql/t_plsql_v$.htm
    http://www.dba-oracle.com/t_plsql_monitoring.htm
    Please DO NOT post links to commercial websites. It is a breach of the Terms of Use of the forums.
    Such websites tend to provide snippits or excerpts of information in order to try and get people to purchase their products (books or whatever) or services.
    There are plenty of good resources out there, including the Oracle documentation, other threads on these forums with similar questions and solutions, or expert's blogs or websites that are not trying to sell something.

  • Work processes are dying during startup

    I am trying to connect to my SAP system and it gives the following error
    I am trying to access my newly installed system after i have performed a client copy and it gives the following error
    partner not reached (host 192.167.1.3, service sapdp03)
    WSAECONNREFUSED: Connection refused
    here is the detailed error log
    Time: Tue Apr 17 12:19:48 2007
    Component: NI (network interface)
    Release 640
    version 37
    Module nixxi_r.cpp
    Line NiPConnect2
    Return Code -10
    System Call SiPeekPendConn
    Error No 10061
    Error Text WSAECONNREFUSED: Connection refused
    Counter 1
    i went further and checked dev_disp and it indicates that the work process are dying,
    here is a copy of dev_disp
    trc file: "dev_disp", trc level: 1, release: "700"
    sysno      03
    sid        DEV
    systemid   560 (PC with Windows NT)
    relno      7000
    patchlevel 0
    patchno    52
    intno      20050900
    make:      multithreaded, Unicode, optimized
    pid        4652
    Thu Apr 19 08:38:36 2007
    kernel runs with dp version 210000(ext=109000) (@(#) DPLIB-INT-VERSION-210000-UC)
    length of sys_adm_ext is 572 bytes
    SWITCH TRC-HIDE on ***
    ***LOG Q00=> DpSapEnvInit, DPStart (03 4652) [dpxxdisp.c   1231]
         shared lib "dw_xml.dll" version 52 successfully loaded
         shared lib "dw_xtc.dll" version 52 successfully loaded
         shared lib "dw_stl.dll" version 52 successfully loaded
         shared lib "dw_gui.dll" version 52 successfully loaded
    rdisp/softcancel_sequence :  -> 0,5,-1
    use internal message server connection to port 3903
    Thu Apr 19 08:38:41 2007
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
    ***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  5233]
    MtxInit: 30000 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
    DpIPCInit2: start server >sapserver_DEV_03                        <
    DpShMCreate: sizeof(wp_adm)          12672     (1408)
    DpShMCreate: sizeof(tm_adm)          3954072     (19672)
    DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
    DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
    DpShMCreate: sizeof(comm_adm)          528064     (1048)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm)          0     (72)
    DpShMCreate: sizeof(vmc_adm)          0     (1452)
    DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
    DpShMCreate: sizeof(gw_adm)     48
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 06510040, size: 4607512)
    DpShMCreate: allocated sys_adm at 06510040
    DpShMCreate: allocated wp_adm at 06511E28
    DpShMCreate: allocated tm_adm_list at 06514FA8
    DpShMCreate: allocated tm_adm at 06514FD8
    DpShMCreate: allocated wp_ca_adm at 068DA570
    DpShMCreate: allocated appc_ca_adm at 068E0330
    DpShMCreate: allocated comm_adm at 068E2270
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 06963130
    DpShMCreate: allocated gw_adm at 06963170
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 069631A0
    DpShMCreate: allocated wall_adm at 069631A8
    MBUF state OFF
    EmInit: MmSetImplementation( 2 ).
    MM diagnostic options set: 0
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 1024 kByte.
    Using implementation flat
    <EsNT> Memory Reset disabled as NT default
    <ES> 511 blocks reserved for free list.
    ES initialized.
    Thu Apr 19 08:38:42 2007
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1617]
    ***LOG Q0K=> DpMsAttach, mscon ( sapserver) [dpxxdisp.c   11414]
    DpStartStopMsg: send start message (myname is >sapserver_DEV_03                        <)
    DpStartStopMsg: start msg sent
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
    Thu Apr 19 08:38:43 2007
    CCMS: start to initalize 3.X shared alert area (first segment).
    DpMsgAdmin: Set release to 7000, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
    DpMsgAdmin: Set patchno for this platform to 52
    Release check o.K.
    Thu Apr 19 08:39:22 2007
    ERROR => W0 (pid 4860) died [dpxxdisp.c   14021]
    ERROR => W1 (pid 4868) died [dpxxdisp.c   14021]
    ERROR => W2 (pid 4876) died [dpxxdisp.c   14021]
    ERROR => W3 (pid 4884) died [dpxxdisp.c   14021]
    my types changed after wp death/restart 0xbf --> 0xbe
    ERROR => W4 (pid 4892) died [dpxxdisp.c   14021]
    my types changed after wp death/restart 0xbe --> 0xbc
    ERROR => W5 (pid 4900) died [dpxxdisp.c   14021]
    my types changed after wp death/restart 0xbc --> 0xb8
    ERROR => W6 (pid 4908) died [dpxxdisp.c   14021]
    my types changed after wp death/restart 0xb8 --> 0xb0
    ERROR => W7 (pid 4916) died [dpxxdisp.c   14021]
    my types changed after wp death/restart 0xb0 --> 0xa0
    ERROR => W8 (pid 4932) died [dpxxdisp.c   14021]
    my types changed after wp death/restart 0xa0 --> 0x80
    DP_FATAL_ERROR => DpWPCheck: no more work processes
    DISPATCHER EMERGENCY SHUTDOWN ***
    increase tracelevel of WPs
    NiWait: sleep (10000ms) ...
    NiISelect: timeout 10000ms
    NiISelect: maximum fd=1597
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Apr 19 08:39:32 2007
    NiISelect: TIMEOUT occured (10000ms)
    dump system status
    Workprocess Table (long)               Thu Apr 19 06:39:32 2007
    ========================
    No Ty. Pid      Status  Cause Start Err Sem CPU    Time  Program  Cl  User         Action                    Table
    0 DIA     4860 Ended         no      1   0             0                                                             
    1 DIA     4868 Ended         no      1   0             0                                                             
    2 DIA     4876 Ended         no      1   0             0                                                             
    3 DIA     4884 Ended         no      1   0             0                                                             
    4 UPD     4892 Ended         no      1   0             0                                                             
    5 ENQ     4900 Ended         no      1   0             0                                                             
    6 BTC     4908 Ended         no      1   0             0                                                             
    7 SPO     4916 Ended         no      1   0             0                                                             
    8 UP2     4932 Ended         no      1   0             0                                                             
    Dispatcher Queue Statistics               Thu Apr 19 06:39:32 2007
    ===========================
    --------++++--
    +
    Typ
    now
    high
    max
    writes
    reads
    --------++++--
    +
    NOWP
    0
    2
    2000
    6
    6
    --------++++--
    +
    DIA
    5
    5
    2000
    5
    0
    --------++++--
    +
    UPD
    0
    0
    2000
    0
    0
    --------++++--
    +
    ENQ
    0
    0
    2000
    0
    0
    --------++++--
    +
    BTC
    0
    0
    2000
    0
    0
    --------++++--
    +
    SPO
    0
    0
    2000
    0
    0
    --------++++--
    +
    UP2
    0
    0
    2000
    0
    0
    --------++++--
    +
    max_rq_id          12
    wake_evt_udp_now     0
    wake events           total     8,  udp     7 ( 87%),  shm     1 ( 12%)
    since last update     total     8,  udp     7 ( 87%),  shm     1 ( 12%)
    Dump of tm_adm structure:               Thu Apr 19 06:39:32 2007
    =========================
    Term    uid  man user    term   lastop  mod wp  ta   a/i (modes)
    Workprocess Comm. Area Blocks               Thu Apr 19 06:39:32 2007
    =============================
    Slots: 300, Used: 1, Max: 0
    --------++--
    +
    id
    owner
    pid
    eyecatcher
    --------++--
    +
    0
    DISPATCHER
    -1
    WPCAAD000
    NiWait: sleep (5000ms) ...
    NiISelect: timeout 5000ms
    NiISelect: maximum fd=1597
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Apr 19 08:39:37 2007
    NiISelect: TIMEOUT occured (5000ms)
    DpHalt: shutdown server >sapserver_DEV_03                        < (normal)
    DpJ2eeDisableRestart
    DpModState: buffer in state MBUF_PREPARED
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
    MsINiWrite: sent 110 bytes
    MsIModState: change state to SHUTDOWN
    DpModState: change server state from STARTING to SHUTDOWN
    Switch off Shared memory profiling
    ShmProtect( 57, 3 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RW
    ShmProtect( 57, 1 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RD
    DpWakeUpWps: wake up all wp's
    Stop work processes
    Stop gateway
    killing process (4840) (SOFT_KILL)
    Stop icman
    killing process (4852) (SOFT_KILL)
    Terminate gui connections
    wait for end of work processes
    wait for end of gateway
    [DpProcDied] Process lives  (PID:4840  HANDLE:1568)
    waiting for termination of gateway ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1597
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Apr 19 08:39:38 2007
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process died  (PID:4840  HANDLE:1568)
    wait for end of icman
    [DpProcDied] Process lives  (PID:4852  HANDLE:1576)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1597
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Apr 19 08:39:39 2007
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:4852  HANDLE:1576)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1597
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Apr 19 08:39:40 2007
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:4852  HANDLE:1576)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1597
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Apr 19 08:39:41 2007
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:4852  HANDLE:1576)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1597
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Apr 19 08:39:42 2007
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:4852  HANDLE:1576)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1597
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Apr 19 08:39:43 2007
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:4852  HANDLE:1576)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1597
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Apr 19 08:39:44 2007
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:4852  HANDLE:1576)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1597
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Apr 19 08:39:45 2007
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:4852  HANDLE:1576)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1597
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Apr 19 08:39:46 2007
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:4852  HANDLE:1576)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1597
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Apr 19 08:39:47 2007
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:4852  HANDLE:1576)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1597
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Apr 19 08:39:48 2007
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:4852  HANDLE:1576)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1597
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Apr 19 08:39:49 2007
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process died  (PID:4852  HANDLE:1576)
    DpStartStopMsg: send stop message (myname is >sapserver_DEV_03                        <)
    NiIMyHostName: hostname = 'sapserver'
    AdGetSelfIdentRecord: >                                                                           <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
    DpConvertRequest: net size = 189 bytes
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
    MsINiWrite: sent 562 bytes
    send msg (len 110+452) to name                    -, type 4, key -
    DpStartStopMsg: stop msg sent
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 recv would block (errno=EAGAIN)
    NiIRead: read for hdl 2 timed out (0ms)
    DpHalt: no more messages from the message server
    DpHalt: send keepalive to synchronize with the message server
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
    MsINiWrite: sent 114 bytes
    send msg (len 110+4) to name           MSG_SERVER, type 0, key -
    MsSndName: MS_NOOP ok
    Send 4 bytes to MSG_SERVER
    NiIRead: hdl 2 recv would block (errno=EAGAIN)
    NiIPeek: peek successful for hdl 2 (r)
    NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=114
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 114 bytes
    MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
    Received 4 bytes from MSG_SERVER                             
    Received opcode MS_NOOP from msg_server, reply MSOP_OK
    MsOpReceive: ok
    MsSendKeepalive : keepalive sent to message server
    NiIRead: hdl 2 recv would block (errno=EAGAIN)
    Thu Apr 19 08:39:50 2007
    NiIPeek: peek for hdl 2 timed out (r; 1000ms)
    NiIRead: read for hdl 2 timed out (1000ms)
    DpHalt: no more messages from the message server
    DpHalt: sync with message server o.k.
    detach from message server
    ***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   11698]
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
    MsINiWrite: sent 110 bytes
    MsIDetach: send logout to msg_server
    MsIDetach: call exit function
    DpMsShutdownHook called
    NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
    SiSelNSet: set events of sock 1524 to: ---
    NiBufISelRemove: remove hdl 2 from set0
    SiSelNRemove: removed sock 1524 (pos=2)
    SiSelNRemove: removed sock 1524
    NiSelIRemove: removed hdl 2
    MBUF state OFF
    AdGetSelfIdentRecord: >                                                                           <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/9
    LOCK WP ca_blk 1
    make DISP owner of wp_ca_blk 1
    DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
    MBUF component DOWN
    NiICloseHandle: shutdown and close hdl 2 / sock 1524
    NiBufIClose: clear extension for hdl 2
    MsIDetach: detach MS-system
    cleanup EM
    EsCleanup ....
    EmCleanup() -> 0
    Es2Cleanup: Cleanup ES2
    ***LOG Q05=> DpHalt, DPStop ( 4652) [dpxxdisp.c   10087]
    Good Bye .....

    Hi
    I am having a similar situation with my SAP NW04 server ..all the process reach the run status and then they get into..ENDED status..I would really appreciate if some one would pls help with this problem.
    Developer log.
    trc file: "dev_disp", trc level: 1, release: "640"
    Thu Oct 04 11:20:48 2007
    kernel runs with dp version 128000(ext=102000) (@(#) DPLIB-INT-VERSION-128000-UC)
    length of sys_adm_ext is 524 bytes
    systemid   560 (PC with Windows NT)
    relno      6400
    patchlevel 0
    patchno    43
    intno      20020600
    make:      multithreaded, Unicode
    pid        3812
    ***LOG Q00=> DpSapEnvInit, DPStart (00 3812) [dpxxdisp.c   1100]
         shared lib "dw_xml.dll" version 43 successfully loaded
         shared lib "dw_xtc.dll" version 43 successfully loaded
         shared lib "dw_stl.dll" version 43 successfully loaded
         shared lib "dw_gui.dll" version 43 successfully loaded
    Thu Oct 04 11:20:53 2007
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
    ***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  3886]
    MtxInit: -2 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: JAVA is not active
    DpShMCreate: sizeof(wp_adm)          10528     (1316)
    DpShMCreate: sizeof(tm_adm)          2780232     (13832)
    DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
    DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
    DpShMCreate: sizeof(comm_adm)          290000     (580)
    DpShMCreate: sizeof(vmc_adm)          0     (372)
    DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 04560040, size: 3192688)
    DpShMCreate: allocated sys_adm at 04560040
    DpShMCreate: allocated wp_adm at 04561B58
    DpShMCreate: allocated tm_adm_list at 04564478
    DpShMCreate: allocated tm_adm at 045644A0
    DpShMCreate: allocated wp_ca_adm at 0480B0E8
    DpShMCreate: allocated appc_ca_adm at 04810EA8
    DpShMCreate: allocated comm_adm_list at 04812DE8
    DpShMCreate: allocated comm_adm at 04812E00
    DpShMCreate: allocated vmc_adm_list at 04859AD0
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 04859AF8
    DpShMCreate: allocated wall_adm at 04859B00
    MBUF state OFF
    EmInit: MmSetImplementation( 2 ).
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 1024 kByte.
    Using implementation flat
    <EsNT> Memory Reset disabled as NT default
    <ES> 915 blocks reserved for free list.
    ES initialized.
    J2EE server info
      start = TRUE
      state = STARTED
      pid = 3880
      argv[0] = E:\usr\sap\SR1\DVEBMGS00/j2ee/os_libs/jcontrol.exe
      argv[1] = E:\usr\sap\SR1\DVEBMGS00/j2ee/os_libs/jcontrol.exe
      argv[2] = pf=E:\usr\sap\SR1\SYS\profile\SR1_DVEBMGS00_myserver
      argv[3] = -DSAPSTART=1
      argv[4] = -DCONNECT_PORT=1234
      argv[5] = -DLISTEN_PORT=1235
      argv[6] = -DSAPSYSTEM=00
      argv[7] = -DSAPSYSTEMNAME=SR1
      argv[8] = -DSAPMYNAME=myserver_SR1_00
      argv[9] = -DSAPPROFILE=E:\usr\sap\SR1\SYS\profile\SR1_DVEBMGS00_myserver
      argv[10] = -DFRFC_FALLBACK=ON
      argv[11] = -DFRFC_FALLBACK_HOST=localhost
      start_lazy = 0
      start_control = SAP J2EE startup framework
    DpJ2eeStart: j2ee state = STARTED
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG CPS=> DpLoopInit, ICU ( 2.6.1 2.6 4.0) [dpxxdisp.c   1462]
    ***LOG Q0K=> DpMsAttach, mscon ( myserver) [dpxxdisp.c   9736]
    CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
    CCMS: start to initalize 3.X shared alert area (first segment).
    DpMsgAdmin: Set release to 6400, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1025]
    DpMsgAdmin: Set patchno for this platform to 43
    Release check o.K.
    Thu Oct 04 11:21:33 2007
    ERROR => W0 (pid 3888) died [dpxxdisp.c   12187]
    ERROR => W1 (pid 3896) died [dpxxdisp.c   12187]
    my types changed after wp death/restart 0xbf --> 0xbe
    ERROR => W2 (pid 3904) died [dpxxdisp.c   12187]
    my types changed after wp death/restart 0xbe --> 0xbc
    ERROR => W3 (pid 3912) died [dpxxdisp.c   12187]
    my types changed after wp death/restart 0xbc --> 0xb8
    ERROR => W4 (pid 3920) died [dpxxdisp.c   12187]
    ERROR => W5 (pid 3928) died [dpxxdisp.c   12187]
    my types changed after wp death/restart 0xb8 --> 0xb0
    ERROR => W6 (pid 3936) died [dpxxdisp.c   12187]
    my types changed after wp death/restart 0xb0 --> 0xa0
    ERROR => W7 (pid 3944) died [dpxxdisp.c   12187]
    my types changed after wp death/restart 0xa0 --> 0x80
    DP_FATAL_ERROR => DpWPCheck: no more work processes
    DISPATCHER EMERGENCY SHUTDOWN ***
    increase tracelevel of WPs
    killing W0-3888 (SIGUSR2)
    ERROR => DpWpKill(3888, SIGUSR2) failed [dpxxtool.c   2468]
    killing W1-3896 (SIGUSR2)
    ERROR => DpWpKill(3896, SIGUSR2) failed [dpxxtool.c   2468]
    killing W2-3904 (SIGUSR2)
    ERROR => DpWpKill(3904, SIGUSR2) failed [dpxxtool.c   2468]
    killing W3-3912 (SIGUSR2)
    ERROR => DpWpKill(3912, SIGUSR2) failed [dpxxtool.c   2468]
    killing W4-3920 (SIGUSR2)
    ERROR => DpWpKill(3920, SIGUSR2) failed [dpxxtool.c   2468]
    killing W5-3928 (SIGUSR2)
    ERROR => DpWpKill(3928, SIGUSR2) failed [dpxxtool.c   2468]
    killing W6-3936 (SIGUSR2)
    ERROR => DpWpKill(3936, SIGUSR2) failed [dpxxtool.c   2468]
    killing W7-3944 (SIGUSR2)
    ERROR => DpWpKill(3944, SIGUSR2) failed [dpxxtool.c   2468]
    NiWait: sleep (10000 msecs) ...
    NiISelect: timeout 10000 ms
    NiISelect: maximum fd=1653
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Oct 04 11:21:43 2007
    NiISelect: TIMEOUT occured (10000 ms)
    dump system status
    Workprocess Table (long)               Thu Oct 04 15:21:43 2007
    ========================
    No Ty. Pid      Status  Cause Start Err Sem CPU    Time  Program  Cl  User         Action                    Table
    0 DIA     3888 Ended         no      1   0             0                                                             
    1 DIA     3896 Ended         no      1   0             0                                                             
    2 UPD     3904 Ended         no      1   0             0                                                             
    3 ENQ     3912 Ended         no      1   0             0                                                             
    4 BTC     3920 Ended         no      1   0             0                                                             
    5 BTC     3928 Ended         no      1   0             0                                                             
    6 SPO     3936 Ended         no      1   0             0                                                             
    7 UP2     3944 Ended         no      1   0             0                                                             
    Dispatcher Queue Statistics               Thu Oct 04 15:21:43 2007
    ===========================
    --------++++--
    +
    Typ
    now
    high
    max
    writes
    reads
    --------++++--
    +
    NOWP
    0
    3
    2000
    9
    9
    --------++++--
    +
    DIA
    5
    5
    2000
    5
    0
    --------++++--
    +
    UPD
    0
    0
    2000
    0
    0
    --------++++--
    +
    ENQ
    0
    0
    2000
    0
    0
    --------++++--
    +
    BTC
    0
    0
    2000
    0
    0
    --------++++--
    +
    SPO
    0
    0
    2000
    0
    0
    --------++++--
    +
    UP2
    0
    0
    2000
    0
    0
    --------++++--
    +
    max_rq_id          12
    wake_evt_udp_now     0
    wake events           total     8,  udp     7 ( 87%),  shm     1 ( 12%)
    since last update     total     8,  udp     7 ( 87%),  shm     1 ( 12%)
    Dump of tm_adm structure:               Thu Oct 04 15:21:43 2007
    =========================
    Term    uid  man user    term   lastop  mod wp  ta   a/i (modes)
    Workprocess Comm. Area Blocks               Thu Oct 04 15:21:43 2007
    =============================
    Slots: 300, Used: 1, Max: 0
    --------++--
    +
    id
    owner
    pid
    eyecatcher
    --------++--
    +
    0
    DISPATCHER
    -1
    WPCAAD000
    NiWait: sleep (5000 msecs) ...
    NiISelect: timeout 5000 ms
    NiISelect: maximum fd=1653
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Oct 04 11:21:48 2007
    NiISelect: TIMEOUT occured (5000 ms)
    Shutdown server ...
    DpJ2eeDisableRestart
    DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=3880)
    killing process (3880) (SOFT_KILL)
    ERROR => DpProcKill: kill failed [dpntdisp.c   433]
    DpIJ2eeShutdown: j2ee state = SHUTDOWN
    NiSelClear: removed hdl 3 from selectset
    DpDelSocketInfo: del info for socket 3 (type=7)
    NiBufClose: clear extensions for hdl 3
    NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
    NiICloseHandle: shutdown and close hdl 3 / socket 1632
    NiSelClear: removed hdl 4 from selectset
    DpDelSocketInfo: del info for socket 4 (type=9)
    NiBufClose: clear extensions for hdl 4
    NiBufSetStat: bufstat of hdl 4 changed from OK to OFF
    NiICloseHandle: shutdown and close hdl 4 / socket 1608
    DpModState: buffer in state MBUF_PREPARED
    NiBufSend starting
    NiIWrite: write 110, 1 packs, MESG_IO, hdl 5, data complete
    MsINiWrite: sent 110 bytes
    MsIModState: change state to SHUTDOWN
    DpModState: change server state from STARTING to SHUTDOWN
    Switch off Shared memory profiling
    ShmProtect( 57, 3 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RW
    ShmProtect( 57, 1 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RD
    DpWakeUpWps: wake up all wp's
    Stop work processes...
    Stop gateway
    killing process (3864) (SOFT_KILL)
    ERROR => DpProcKill: kill failed [dpntdisp.c   433]
    Stop icman
    killing process (3872) (SOFT_KILL)
    Terminate gui connections
    [DpProcDied] Process died  (PID:3864  HANDLE:1624)
    [DpProcDied] Process lives  (PID:3872  HANDLE:1616)
    waiting for termination of icman
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=1653
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Oct 04 11:21:49 2007
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process died  (PID:3872  HANDLE:1616)
    DpHalt: cancel all lcom connections
    MPI CancelAll 2 -> 0
    MPI DeleteAll 2 -> 0
    [DpProcDied] Process died  (PID:3880  HANDLE:1592)
    NiIMyHostName: hostname = 'myserver'
    AdGetSelfIdentRecord: >                                                                           <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
    DpConvertRequest: net size = 163 bytes
    NiBufSend starting
    NiIWrite: write 562, 1 packs, MESG_IO, hdl 5, data complete
    MsINiWrite: sent 562 bytes
    send msg (len 110+452) to name          -, type 4, key -
    detach from message server
    ***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   9962]
    NiBufSend starting
    NiIWrite: write 110, 1 packs, MESG_IO, hdl 5, data complete
    MsINiWrite: sent 110 bytes
    MsIDetach: send logout to msg_server
    MsIDetach: call exit function
    DpMsShutdownHook called
    NiSelClear: removed hdl 5 from selectset
    MBUF state OFF
    AdGetSelfIdentRecord: >                                                                           <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/8
    LOCK WP ca_blk 1
    make DISP owner of wp_ca_blk 1
    DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 18)
    MBUF component DOWN
    NiBufClose: clear extensions for hdl 5
    NiBufSetStat: bufstat of hdl 5 changed from OK to OFF
    NiICloseHandle: shutdown and close hdl 5 / socket 1596
    MsIDetach: detach MS-system
    EsCleanup ....
    ***LOG Q05=> DpHalt, DPStop ( 3812) [dpxxdisp.c   8495]
    Good Bye .....

  • MacBook Pro running slow and lagging during app switches/start

    I mean, it's really getting bad. I have to force quit repeatedly and then by some miracle - something takes and the program opens. Most of the time this happens with Photoshop and Firefox (which is what I use most often). PS does not have a bunch of add-ons running or installed. It's pretty much CS3 factory.
    I ran Disk Utility yesterday - during the verify disc, it told me to boot from the install disc to fix the 2 errors it found. I backed everything up and I did. Ran all the verifies and repairs from the start disc.
    Still running slow and by this I mean when I open an application it takes a ridiculously long time to open the double-clicked document or just the program itself to get to a new doc. I noticed it again this morning with Excel (which is something I don't usually leave open and running).
    What else I have done, which helped but just a smidgen ... was to remove all the extra fonts (and I did have thousands) in Font Book. I also removed Font Book entirely because it was another program that was locking up and needing force quit all the time ... and I just plain don't like it. So I installed Suitcase Fusion and only have the bare minimum needed in there (which kind of bothers me since I am used to have thousands on hand that just need to be turned on or off - yes I know, I keep them all off unless they are absolutely needed). But I only have one set in the Suitcase (42 font family).
    I got my laptop in Feb ... so this painfully slow and lagging stuff shouldn't be happening. It used to work great. I could have all the apps open, flipping between them, really getting things done.
    Here's my comp info:
    Version 10.6.4
    Processor: 3.06 GHz Intel Core 2 Duo
    Memory: 4 GB 1067 MHz DDR3
    HD: 500gb but I have 345gb free
    Any obvious things I am overlooking? Any suggestions on how to get this fairly new thing back up to speed?
    Thanks!

    HI,
    I also removed Font Book entirely because it was another program that was locking up and needing force quit all the time.
    Go here for help with fonts.
    Font Problems and Management in Mac OS X

  • JDK6 And ClassNotFound Exception during RMI server start

    Hello,
    I have been write a simple Hello World RMI, but I'm unable to start the server always get this exeception:
    Server exception: java.rmi.ServerException: RemoteException occurred in server thread; nested exception is:
         java.rmi.UnmarshalException: error unmarshalling arguments; nested exception is:
         java.lang.ClassNotFoundException: rmi.Hello
    java.rmi.ServerException: RemoteException occurred in server thread; nested exception is:
         java.rmi.UnmarshalException: error unmarshalling arguments; nested exception is:
         java.lang.ClassNotFoundException: rmi.Hello
         at sun.rmi.server.UnicastServerRef.oldDispatch(UnicastServerRef.java:396)
         at sun.rmi.server.UnicastServerRef.dispatch(UnicastServerRef.java:250)
         at sun.rmi.transport.Transport$1.run(Transport.java:159)
         at java.security.AccessController.doPrivileged(Native Method)
         at sun.rmi.transport.Transport.serviceCall(Transport.java:155)
         at sun.rmi.transport.tcp.TCPTransport.handleMessages(TCPTransport.java:535)
         at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run0(TCPTransport.java:790)
         at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(TCPTransport.java:649)
         at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:885)
         at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:907)
         at java.lang.Thread.run(Thread.java:619)
         at sun.rmi.transport.StreamRemoteCall.exceptionReceivedFromServer(StreamRemoteCall.java:255)
         at sun.rmi.transport.StreamRemoteCall.executeCall(StreamRemoteCall.java:233)
         at sun.rmi.server.UnicastRef.invoke(UnicastRef.java:359)
         at sun.rmi.registry.RegistryImpl_Stub.bind(Unknown Source)
         at rmi.HelloMain.main(HelloMain.java:21)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at com.intellij.rt.execution.application.AppMain.main(AppMain.java:90)The sources are these:
    package rmi;
    import java.rmi.Remote;
    import java.rmi.RemoteException;
    public interface Hello extends Remote {
        public void sayHello() throws RemoteException;
    package rmi;
    import java.rmi.RemoteException;
    public class HelloServer implements Hello{
        public HelloServer() {
            super();
        public void sayHello() throws RemoteException {
            System.out.println("Ciau!");
    package rmi;
    import java.rmi.registry.LocateRegistry;
    import java.rmi.registry.Registry;
    import java.rmi.server.UnicastRemoteObject;
    public class HelloMain {
        public static void main(String[] args) {
         try {
             Hello obj = new HelloServer();
             Hello stub = (Hello) UnicastRemoteObject.exportObject(obj, 0);
            // Bind the remote object's stub in the registry
            Registry registry = LocateRegistry.getRegistry();
            registry.bind("Hello", stub);
            System.err.println("Server ready");
        } catch (Exception e) {
            System.err.println("Server exception: " + e.toString());
            e.printStackTrace();
    }May be I'm wrong with start command, but I tried differents syntax without result.
    Can you help me?
    Thanks to all.
    PS:Sorry for my spaghetti-english :D

    I had similar issue and i got rid of it by doing the following:
    i. Start rmiregistry from the server code (so that the JVM remains the same) like this
    // Server.java
    Process pro = Runtime.getRuntime().exec("rmiregistry 1099 &");
    // ... ii. Use java.rmi.server.codebase property while starting the server
    D:\rmiEx\bin>java -Djava.rmi.server.codebase=file:/D:\rmiEx\bin example.hello.Server

  • Which keys are used in Client/Server Authentication?

    Hi.
    I am trying to understand how SunX509 algorithm works in a TLS context. When Server or Client authentication is done, which keys of the keystore are used?
    I mean, when you set up your KeyStore instance, it is loaded a whole KeyStore from the filesystem, which has a lot of keys to be used. Are they all tried in order to find the key that authenticates the Client/Server, and when a key that works is found means that Client/Server is authenticated? Or a concrete key with a specific alias is used?
    Do you know a doc or something similar where i can see this explanation? I haven't found this matter in JSSE API User's Guide nor in JSSE Javadocs.
    Thanks!

    The alias that is chosen is arbitrary and depends upon the order in which the aliases are returned via a hashtable enumeration. If you want to make sure you're using a particular aliasn you must write your own key manager, take a look at the X509KeyManager interface with methods such chooseClientAlias(), chooseServerAlias(), ...

  • EDI processing with file at app server

    Hi,
    In the scenario I am handling file is present at specific file path at application server in the file format required which is required by message type (It holds both control and data record required for message type ).
    Could you please let me know how I trigger process for creation of inbound IDOC ?
    I have create file type port defination and partner profile.
    Could I use FM EDI_DATA_INCOMING ?
    Regards,
    Amit

    better to develop unix script for creation of file in appropriate format and created inbound IDOCs.

  • J2EE on Windows App server wont start after JSPM patching

    Hi,
    I've patched an ECC6 system on DB2 V5R4 to SP16 level on ABAP side, and Enhancement pack 3, and then did an update to JSPM and installed new SP16 levels of the Java components.
    Now my Windows App server starts only the ABAP Work processes, not the J2EE side. I get a yellow light and the message
    J2EE Status info unavailable.
    On the Windows work directory for Dialog instance D00, I see that the dev_server0 has only messages about the last shutdown 2 days ago.
    The dev_jcontrol has errors in it abot Unknown property and
    JStartupICheckFrameworkPackage: can't find framework package U:\usr\sap\WFD\D00\exe\jvmx.jar
    see below.
    Any ideas?
    regards
    Michael.
    trc file: "U:\usr\sap\WFD\D00\work\dev_jcontrol", trc level: 1, release: "700"
    node name   : jcontrol
    pid         : 2308
    system name : WFD
    system nr.  : 00
    started at  : Thu Sep 25 15:46:00 2008
    arguments       :
           arg[00] : U:\usr\sap\WFD\D00\exe\jcontrol.EXE
           arg[01] : pf=
    sapdev\sapmnt\WFD\SYS\profile\WFD_D00_dfbhl6
           arg[02] : -DSAPSTART=1
           arg[03] : -DCONNECT_PORT=64990
           arg[04] : -DSAPSYSTEM=00
           arg[05] : -DSAPSYSTEMNAME=WFD
           arg[06] : -DSAPMYNAME=dfbhl6_WFD_00
           arg[07] : -DSAPPROFILE=
    sapdev\sapmnt\WFD\SYS\profile\WFD_D00_dfbhl6
           arg[08] : -DFRFC_FALLBACK=ON
           arg[09] : -DFRFC_FALLBACK_HOST=localhost
    [Thr 2040] Thu Sep 25 15:46:00 2008
    [Thr 2040] *** WARNING => INFO: Unknown property [instance.box.number=WFDD00dfbhl6] [jstartxx.c   841]
    [Thr 2040] *** WARNING => INFO: Unknown property [instance.en.host=sapdev] [jstartxx.c   841]
    [Thr 2040] *** WARNING => INFO: Unknown property [instance.en.port=3241] [jstartxx.c   841]
    [Thr 2040] *** WARNING => INFO: Unknown property [instance.system.id=0] [jstartxx.c   841]
    JStartupReadInstanceProperties: read instance properties [U:\usr\sap\WFD\D00\j2ee\cluster\instance.properties]
    -> ms host    : sapdev
    -> ms port    : 3941
    -> OS libs    : U:\usr\sap\WFD\D00\j2ee\os_libs
    -> Admin URL  :
    -> run mode   : safe
    -> run action : UPGRADE
    -> enabled    : no
    Used property files
    -> files [00] : U:\usr\sap\WFD\D00\j2ee\cluster\instance.properties
    Instance properties
    -> ms host    : sapdev
    -> ms port    : 3941
    -> os libs    : U:\usr\sap\WFD\D00\j2ee\os_libs
    -> admin URL  :
    -> run mode   : safe
    -> run action : UPGRADE
    -> enabled    : no
    Bootstrap nodes
    -> [00] bootstrap            : U:\usr\sap\WFD\D00\j2ee\cluster\instance.properties
    -> [01] bootstrap_ID2623900  : U:\usr\sap\WFD\D00\j2ee\cluster\instance.properties
    -> [02] bootstrap_ID2623950  : U:\usr\sap\WFD\D00\j2ee\cluster\instance.properties
    Worker nodes
    -> [00] ID2623900            : U:\usr\sap\WFD\D00\j2ee\cluster\instance.properties
    -> [01] ID2623950            : U:\usr\sap\WFD\D00\j2ee\cluster\instance.properties
    [Thr 2040] JControlExecuteBootstrap: execute bootstrap process [bootstrap]
    [Thr 3504] JControlDPMessageProxy: Thread 3504 started as handler thread for R/3 dispatcher messages.
    [Thr 2040] [Node: bootstrap] java home is set by profile parameter
         Java Home: C:\j2sdk1.4.2_13
    [Thr 2040] JStartupICheckFrameworkPackage: can't find framework package U:\usr\sap\WFD\D00\exe\jvmx.jar
    JStartupIReadSection: read node properties [bootstrap]
    -> node name          : bootstrap
    -> node type          : bootstrap
    -> node execute       : yes
    -> java path          : C:\j2sdk1.4.2_13
    -> java parameters    : -Djco.jarm=1 -verbose:gc -Djava.compiler=jitc -Dos400.run.mode=jitc -Dos400.disable.explicit.gc -Dos400.define.class.cache.file=/usr/sap/WFD/SYS/j2ee/cache/QDefineClassCache.jar -Dos400.define.class.cache.hours=9999 -Dos400.define.class.cache.maxpgms=40000 -Djava.ext.dirs=/usr/sap/WFD/SYS/j2ee/ext
    -> java vm version    : 1.4.2_13-b06
    -> java vm vendor     : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
    -> java vm type       : server
    -> java vm cpu        : x86
    -> heap size          : 512M
    -> root path          : U:\usr\sap\WFD\D00\j2ee\cluster
    -> class path         : .\bootstrap\launcher.jar
    -> OS libs path       : U:\usr\sap\WFD\D00\j2ee\os_libs
    -> main class         : com.sap.engine.offline.OfflineToolStart
    -> framework class    : com.sap.bc.proj.jstartup.JStartupFramework
    -> registr. class     : com.sap.bc.proj.jstartup.JStartupNatives
    -> framework path     : U:\usr\sap\WFD\D00\exe\jstartup.jar;U:\usr\sap\WFD\D00\exe\jvmx.jar
    -> parameters         : com.sap.engine.bootstrap.Bootstrap ./bootstrap ID0026239
    -> debuggable         : yes
    -> debug mode         : no
    -> debug port         : 60000
    -> shutdown timeout   : 120000
    JControlStartJLaunch: program = U:\usr\sap\WFD\D00\exe\jlaunch.exe
    -> arg[00] = U:\usr\sap\WFD\D00\exe\jlaunch.exe
    -> arg[01] = pf=
    sapdev\sapmnt\WFD\SYS\profile\WFD_D00_dfbhl6
    -> arg[02] = -DSAPINFO=WFD_00_bootstrap
    -> arg[03] = -nodeId=-1
    -> arg[04] = -file=U:\usr\sap\WFD\D00\j2ee\cluster\instance.properties
    -> arg[05] = -syncSem=JSTARTUP_WAIT_ON_2308
    -> arg[06] = -nodeName=bootstrap
    -> arg[07] = -jvmOutFile=U:\usr\sap\WFD\D00\work\jvm_bootstrap.out
    -> arg[08] = -stdOutFile=U:\usr\sap\WFD\D00\work\std_bootstrap.out
    -> arg[09] = -locOutFile=U:\usr\sap\WFD\D00\work\dev_bootstrap
    -> arg[10] = -mode=BOOTSTRAP
    -> arg[11] = pf=
    sapdev\sapmnt\WFD\SYS\profile\WFD_D00_dfbhl6
    -> arg[12] = -DSAPSTART=1
    -> arg[13] = -DCONNECT_PORT=4556
    -> arg[14] = -DSAPSYSTEM=00
    -> arg[15] = -DSAPSYSTEMNAME=WFD
    -> arg[16] = -DSAPMYNAME=dfbhl6_WFD_00
    -> arg[17] = -DSAPPROFILE=
    sapdev\sapmnt\WFD\SYS\profile\WFD_D00_dfbhl6
    -> arg[18] = -DFRFC_FALLBACK=ON
    -> arg[19] = -DFRFC_FALLBACK_HOST=localhost
    -> lib path = PATH=C:\j2sdk1.4.2_13\jre\bin\server;C:\j2sdk1.4.2_13\jre\bin;U:\usr\sap\APD\D31\exe;
    sapdev\SAPMNT\APD\exe\run_nt;U:\sapdb\programs\bin;U:\sapdb\programs\pgm;C:\WINNT\system32;C:\WINNT;C:\WINNT\System32\Wbem;C:\WINNT\AS400WSV\Admin;C:\WINNT\AS400WSV\Service;C:\WINNT\AS400WSV\Drivers;C:\PROGRA1\IBM\CLIENT1;C:\PROGRA1\IBM\CLIENT1\Shared;C:\PROGRA1\IBM\CLIENT1\Emulator;C:\Program Files\Symantec\pcAnywhere\;;
    sapdev\sapmnt\WFD\SYS\exe\uc\NTI386;U:\usr\sap\WFD\D00\exe
    -> exe path = PATH=C:\j2sdk1.4.2_13\bin;U:\usr\sap\WFD\D00\j2ee\os_libs;U:\usr\sap\APD\D31\exe;
    sapdev\SAPMNT\APD\exe\run_nt;U:\sapdb\programs\bin;U:\sapdb\programs\pgm;C:\WINNT\system32;C:\WINNT;C:\WINNT\System32\Wbem;C:\WINNT\AS400WSV\Admin;C:\WINNT\AS400WSV\Service;C:\WINNT\AS400WSV\Drivers;C:\PROGRA1\IBM\CLIENT1;C:\PROGRA1\IBM\CLIENT1\Shared;C:\PROGRA1\IBM\CLIENT1\Emulator;C:\Program Files\Symantec\pcAnywhere\;;
    sapdev\sapmnt\WFD\SYS\exe\uc\NTI386;U:\usr\sap\WFD\D00\exe
    [Thr 2040] Thu Sep 25 15:46:26 2008
    [Thr 2040] JControlExecuteBootstrap: read instance values after global bootstrap
    [Thr 2040] *** WARNING => INFO: Unknown property [instance.box.number=WFDD00dfbhl6] [jstartxx.c   841]
    [Thr 2040] *** WARNING => INFO: Unknown property [instance.en.host=sapdev] [jstartxx.c   841]
    [Thr 2040] *** WARNING => INFO: Unknown property [instance.en.port=3241] [jstartxx.c   841]
    [Thr 2040] *** WARNING => INFO: Unknown property [instance.system.id=0] [jstartxx.c   841]
    JStartupReadInstanceProperties: read instance properties [U:\usr\sap\WFD\D00\j2ee\cluster\instance.properties]
    -> ms host    : sapdev
    -> ms port    : 3941
    -> OS libs    : U:\usr\sap\WFD\D00\j2ee\os_libs
    -> Admin URL  :
    -> run mode   : safe
    -> run action : UPGRADE
    -> enabled    : no
    [Thr 2040] JControlExecuteBootstrap: enumerate the nodes after global bootstrap
    Used property files
    -> files [00] : U:\usr\sap\WFD\D00\j2ee\cluster\instance.properties
    Instance properties
    -> ms host    : sapdev
    -> ms port    : 3941
    -> os libs    : U:\usr\sap\WFD\D00\j2ee\os_libs
    -> admin URL  :
    -> run mode   : safe
    -> run action : UPGRADE
    -> enabled    : no
    Bootstrap nodes
    -> [00] bootstrap            : U:\usr\sap\WFD\D00\j2ee\cluster\instance.properties
    -> [01] bootstrap_ID2623900  : U:\usr\sap\WFD\D00\j2ee\cluster\instance.properties
    -> [02] bootstrap_ID2623950  : U:\usr\sap\WFD\D00\j2ee\cluster\instance.properties
    Worker nodes
    -> [00] ID2623900            : U:\usr\sap\WFD\D00\j2ee\cluster\instance.properties
    -> [01] ID2623950            : U:\usr\sap\WFD\D00\j2ee\cluster\instance.properties
    [Thr 2040] JControlCheckRunMode: run mode of the instance = safe
    [Thr 2040] Instance is disabled -> terminate.
    [Thr 2040] JControlCloseProgram: started (exitcode = -11113)
    [Thr 2040] JControlCloseProgram: good bye... (exitcode = -11113)

    Thanks Kaushal,
    I hadn't done any changes to UME, but I have got a JSPM support package (EP-PSERV SP16) in status of ERROR that seems to be at the bottom of the problem.
    Apparently, JSPM is not able to cope with any flavour of IBM DB2 (Windows, AIX, or i) at a point in this support package.  There is a note 1156313 and it matches the error which is in the  sdm log file:
    Sep 25, 2008 4:51:32 PM  Info: 16:51:31 2008-09-25 dbs-Info:  WCR_USERSTAT modify column LOGONID to   type : VARCHAR,len : 255,dec : 0,not null : true,default :
    Sep 25, 2008 4:51:32 PM  Info: 16:51:31 2008-09-25 dbs-Info:  WCR_USERSTAT modify column LOGONID to   type : VARCHAR,len : 255,dec : 0,not null : true,default :
    Sep 25, 2008 4:51:32 PM  Info: 16:51:31 2008-09-25 db4-Info:  existsData() returns true.
    Sep 25, 2008 4:51:32 PM  Info: 16:51:31 2008-09-25 dbs-Info:  Action: CONVERT
    Sep 25, 2008 4:51:32 PM  Info: 16:51:31 2008-09-25 dbs-Info:  Action: CONVERT
    Sep 25, 2008 4:51:32 PM  Info: 16:51:31 2008-09-25 dbs-Info:  Table has to be converted
    Sep 25, 2008 4:51:32 PM  Info: 16:51:31 2008-09-25 dbs-Info:  Table has to be converted
    Sep 25, 2008 4:51:32 PM  Info:
    Sep 25, 2008 4:51:32 PM  Info: E R R O R ******* (DbModificationManager)
    Sep 25, 2008 4:51:32 PM  Info: 16:51:31 2008-09-25 dbs-Error:  Table WCR_USERSTAT: Conversion currently not possible
    Sep 25, 2008 4:51:32 PM  Info:
    Sep 25, 2008 4:51:32 PM  Info: E R R O R ******* (DbModificationManager)
    Sep 25, 2008 4:51:32 PM  Info: 16:51:31 2008-09-25 dbs-Error:  Table WCR_USERSTAT: Conversion currently not possible
    Meanwhile, the commands in the note don't work as the DB   (Owner )  *ALL
    PUBLIC    *EXCLUDE
    regards
    Michael

  • [EJB:015001]Unable to link class while server start up.

    I am getting the below exception during weblogic server start up.
    In the server under autodeploy folder there exist a class - AccountCacheLoaderMDB. I clue less, what is the cause for this exception. Can anyone help me out in solving this issue please,its urgent
    <Jun 2, 2011 10:23:01 AM EDT> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'gts' due to error weblogic.application.ModuleException: Exception preparing module: EJBModule(autodeploy)
    [EJB:011023]An error occurred while reading the deployment descriptor. The error was:
    Error processing annotations: ..
    weblogic.application.ModuleException: Exception preparing module: EJBModule(autodeploy)
    [EJB:011023]An error occurred while reading the deployment descriptor. The error was:
    Error processing annotations: .
         at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:454)
         at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
         at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:387)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
         at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:58)
         Truncated. see log file for complete stacktrace
    weblogic.utils.ErrorCollectionException:
    There are 1 nested errors:
    weblogic.j2ee.dd.xml.AnnotationProcessException: [EJB:015001]Unable to link class sepact.sepact-app.com.citi.gts.alto.accountservice.service.AccountCacheLoaderMDB in Jar C:\Oracle\user_projects\domains\base_domain\autodeploy : java.lang.NoClassDefFoundError: sepact/sepact-app/com/citi/gts/alto/accountservice/service/AccountCacheLoaderMDB (wrong name: com/citi/gts/alto/accountservice/service/AccountCacheLoaderMDB)
         at weblogic.j2ee.dd.xml.BaseJ2eeAnnotationProcessor.addProcessingError(BaseJ2eeAnnotationProcessor.java:1272)
         at weblogic.j2ee.dd.xml.BaseJ2eeAnnotationProcessor.addFatalProcessingError(BaseJ2eeAnnotationProcessor.java:1277)
         at weblogic.ejb.container.dd.xml.EjbAnnotationProcessor.processAnnotations(EjbAnnotationProcessor.java:168)
         at weblogic.ejb.container.dd.xml.EjbDescriptorReaderImpl.processStandardAnnotations(EjbDescriptorReaderImpl.java:332)
         at weblogic.ejb.container.dd.xml.EjbDescriptorReaderImpl.createReadOnlyDescriptorFromJarFile(EjbDescriptorReaderImpl.java:192)
         at weblogic.ejb.spi.EjbDescriptorFactory.createReadOnlyDescriptorFromJarFile(EjbDescriptorFactory.java:93)
         at weblogic.ejb.container.deployer.EJBModule.loadEJBDescriptor(EJBModule.java:1210)
         at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:382)
         at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
         at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:387)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
         at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:58)
         at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:42)
         at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:609)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
         at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:185)
         at weblogic.application.internal.SingleModuleDeployment.prepare(SingleModuleDeployment.java:40)
         at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
         at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
         at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:141)
         at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:39)
         at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:187)
         at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:21)
         at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
         at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:165)
         at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
         at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
         at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
         at weblogic.j2ee.dd.xml.BaseJ2eeAnnotationProcessor.addProcessingError(BaseJ2eeAnnotationProcessor.java:1271)
         at weblogic.j2ee.dd.xml.BaseJ2eeAnnotationProcessor.addFatalProcessingError(BaseJ2eeAnnotationProcessor.java:1277)
         at weblogic.ejb.container.dd.xml.EjbAnnotationProcessor.processAnnotations(EjbAnnotationProcessor.java:168)
         at weblogic.ejb.container.dd.xml.EjbDescriptorReaderImpl.processStandardAnnotations(EjbDescriptorReaderImpl.java:332)
         at weblogic.ejb.container.dd.xml.EjbDescriptorReaderImpl.createReadOnlyDescriptorFromJarFile(EjbDescriptorReaderImpl.java:192)
         Truncated. see log file for complete stacktrace
    >
    ===============================================================
    Here is the message driven bean.
    package com.xxx.gts.alto.accountservice.service;
    import com.xxx.gts.alto.accountservice.adapter.AccountAdapter;
    import com.xxx.gts.alto.accountservice.util.AccBeanUtil;
    import com.xxx.gts.alto.accountservice.util.AccountConstants;
    import com.xxx.gts.alto.accountservice.util.AccountLoader;
    import org.apache.log4j.Logger;
    import org.springframework.beans.factory.BeanFactory;
    import javax.ejb.ActivationConfigProperty;
    import javax.ejb.EJB;
    import javax.ejb.MessageDriven;
    import javax.ejb.TransactionAttribute;
    import javax.ejb.TransactionAttributeType;
    import javax.ejb.TransactionManagement;
    import javax.ejb.TransactionManagementType;
    import javax.jms.Message;
    import javax.jms.MessageListener;
    import javax.jms.TextMessage;
    * MDB for the Account Cache Loader.
    @MessageDriven(mappedName = "AccountCacheLoaderQueue", activationConfig = {@ActivationConfigProperty(propertyName = "destinationType", propertyValue = "javax.jms.Queue"),@ActivationConfigProperty(propertyName = "destinationName", propertyValue = "AccountCacheLoaderQueue")})
    @TransactionManagement(value = TransactionManagementType.CONTAINER)
    @TransactionAttribute(value = TransactionAttributeType.NOT_SUPPORTED)
    public class AccountCacheLoaderMDB implements MessageListener {
    private static Logger logger = Logger.getLogger(AccountCacheLoaderMDB.class.getName());
    private static final String LOCAL_ADAPATER = AccBeanUtil.getProperty(AccountConstants.ADAPTER_ID);
    private static final String TOKEN_SEPARATOR = ","; // \\s
    @EJB
    private BeanFactory beanFactory;
    public void onMessage(Message message) {
    logger.debug("Entering onMessage of AccountCacheLoaderMDB");
    try {
    if (message instanceof TextMessage) {
    TextMessage tmsg = (TextMessage) message;
    String[] msgArr = tmsg.getText().split(TOKEN_SEPARATOR);
    logger.debug("Trying to get AccountAdapter");
    AccountAdapter acctAdapter = (AccountAdapter) beanFactory.getBean(LOCAL_ADAPATER);
    if (acctAdapter == null) {
    throw new RuntimeException("Account Adapter cannot be determined.");
    for (String msg : msgArr) {
    if (msg.equalsIgnoreCase(AccountConstants.ACC_RELOAD)) {
    logger.debug("Calling AccountLoader.load");
    AccountLoader.load(acctAdapter);
    } else if (msg.equalsIgnoreCase(AccountConstants.BIC_RELOAD)) {
    logger.debug("Calling AccountLoader.loadBicData");
    AccountLoader.loadBicData(acctAdapter);
    } catch (Exception e) {
    logger.error("Error while loading Account.", e);
    throw new RuntimeException(e);
    logger.debug("Exiting onMessage of AccountCacheLoaderMDB");
    can any one throw some light please...its urgent

    Your class seems to be in the wrong folder structure.
    instead of sepact/sepact-app/com/citi/gts/alto/accountservice/service/ it needs to be in com/citi/gts/alto/accountservice/service/ which matches the folder structure.

  • How to add an object in JNDI when a server starts?

    I have an integration app. The app contains EJB project. The project contains EJB which reads data from LDAP.
    My first version of EJB contains the following code:
    Hashtable env = new Hashtable();
    env.put(Context.INITIAL_CONTEXT_FACTORY,"com.sun.jndi.ldap.LdapCtxFactory");
    env.put(Context.PROVIDER_URL, strProvider);
    env.put(Context.SECURITY_AUTHENTICATION, strAuth); env.put(Context.SECURITY_PRINCIPAL,strPrincipal); env.put(Context.SECURITY_CREDENTIALS,strCredentials);
    DirContext dirCtx = new InitialDirContext(env); // exception
    All connection properties are hardcoded and it is not a good practice.
    Also I can put those properties into deployment descriptor. But I am going to have some EJBs and each EJB has to have those properties into descriptors. It is not useful.
    My idea: I would like to have whatever object which is called automatically when a server starts; this object creates InitialDirContext and put the context into JNDI. All EJBs lookup the context by a name. But I don't know how to do that.
    And another question: how to change connection properties dynamically? My idea is putting the properties in XML Cache. And my object (which creates InitialDirContext) reads the properties from XML Cache. Can I handle a message that my properties in XML Cache have been changed and in this cases my object reads new properties and calls rebind() to update InitialDirContext?
    Thanks,
    Ivan

    To bind an object into the JNDI tree check the documentation here:
    http://e-docs.bea.com/wls/docs81/jndi/jndi.html#475702
    If this is to be used by all your applications that you deploy on the server check out the startup/shutdown class documentation here:
    http://edocs.bea.com/wls/docs81/ConsoleHelp/startup_shutdown.html
    Cheers
    IV

  • SQL Exceptions, transport-level errors on SharePoint 2010 App Server

    SharePoint 2010 becomes inaccessible 2-3 times per day. It happens at approximately the same times: 8 PM, 1 AM and 1 PM. It is inaccessible for about 3-4 minutes and then comes back on its own.
    During the time it is down, we see the following errors in the event viewer on the application server:
    EventID: 5586 Task Category: Database -
    Unknown SQL Exception 64 occurred. Additional error information from SQL Server is included below.A transport-level error has occurred when receiving results from the server.
    (provider: TCP Provider, error: 0 - The specified network name is no longer available.)
    EventID: 3 Task Category: None -
    .Net SqlClient Data Provider: System.Data.SqlClient.SqlException: A transport-level error has occurred when receiving results from the server. (provider: TCP Provider, error:
    0 - The specified network name is no longer available.)
    EventID: 6398 Task Category: Timer -
    The Execute method of job definition Microsoft.Office.Server.Search.Monitoring.HealthStatUpdateJobDefinition (ID f9db48f1-f115-47ab-99b6-552460cbb782) threw an exception. More
    information is included below. A transport-level error has occurred when receiving results from the server. (provider: TCP Provider, error: 0 - The specified network name is no longer available.)
    EventID: 8086 Task Category: Business Data -
    The BDC Service application failed due to a SQL Exception: SQLServer host ums1spd1v. The error returned was: 'A transport-level error has occurred when sending the request to
    the server. (provider: TCP Provider, error: 0 - An existing connection was forcibly closed by the remote host.)'
    The SharePoint logs have errors during the same time period saying the same kinds of things: Sql exception raw message: A transport-level error has occurred when receiving results from the server,
    The specified network name is no longer available, etc.
    Our network administrator has looked at the issue and cannot find any network problems. 
    He setup a continuous ping from the app server to the database server. 
    Even during the times these errors are occurring, the app server is still able to reach the database server. 
    However, you cannot ping the app server itself during this time.
    Our database administer cannot find any SQL Server issues. 
    There are no errors in the event viewer or the SQL logs on the database server.
    In Central Admin, we can see that one or two jobs fail with SQL errors during the times these errors take place.
     It is almost always the “User Profile Service Application – User Profile Language Synchronization Job” and often the “Health Statistics Updating” or “Crawl Log Report for Search Application Search Service Application”. 
    These jobs run successfully at many other times during the day.
    Is there a good way to tell if the database, network or SharePoint itself is the root of these problems? 
    The database and network guys say there are no problems in their areas, but all I can find in the SharePoint logs is that it can’t reach the database server.
    Thank you for any suggestions you may have!

    Since these seem to happen at very specific times, I would run a NetMon trace at that window to capture what is going back and forth (or perhaps the timer service is just unable to reach the SQL server).
    Trevor Seward, MCC
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • What happens during sql startup ?

    Hi All,
    What happens during SQL Server service startup ?
    Basically, i am looking at step by step process of how sql server brings up the instance with all sp_configure settings,startup parameters etc..
    Thanks in Advance.

    You don’t have to restart SQL Server unless you have changed service properties or already set startup traces and you want that to take effect immediately. Restarting the server
    is probably one of the most damaging things for performance as it throw away statistics collected in the operational stats DMVs (i.e. SQL Server resets the counters to 0 each time
    the SQL Server service is restarted) and so on.
    Anyways to answer the question always when you start up SQL Server it goes via different recovery phases so for detail reading check out this link, I hope this
    might help you in finding out your answer 
    https://community.emc.com/docs/DOC-13849
    Please remember to click “Mark as Answer” on the post that has answered your question as it it very relevant to other community members having the same problem.

  • Cant able to create new instance on app.server ?

    The configuration files for this Oracle Application Server instance are inconsistent with the
    configuration stored in the repository. In order to protect the repository,
    Hi ,
    we are having oracle-app.server version :10.1.2.0.2
    since this evening when we are trying to create the instance it throws the below error.
    i tried dcmctl update confg also but there also this same error. need ur help.
    no further configuration or deployment operations are allowed until the problem with the configuration on the filesystem is resolved. This condition arises when a prior operation was unsuccessful. The exception associated with this failed operation is:
    {0}
    . Please also check the logs located at
    ORACLE_HOME/dcm/logs to determine why DCM was unsuccessful in updating
    the configuration files on disk. Some possible causes are:
    * permissions on files
    * file contention issues on Windows NT
    * internal Oracle error
    After resolving the problem that prevented DCM from updating the configuration
    files, you may use the dcmctl resyncInstance command to resolve the problem.
    Alternatively, you can stop and then restart the active dcmctl or EMD
    process and resyncInstance will automatically be performed.
    Thanks..

    Go to
    http://download.cnet.com/EaseUS-Partition-Master-Free-Edition/3000-2248_4-10863346.html and download the Partition Magic utility.
    This problem is caused by Windows not recognizing the Ubuntu partitions.  Windows is not designed to work with foreign partitions so this problem is caused by Ubuntu.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Maybe you are looking for

  • Period close in MM problem in PGI SD

    Hi, I have problem at the time of PGI! I have close all the period  by mmpv from 01/2006 to 01/2010 but in actually I have to post entry in 01/2010. To post entry in 01/2010 I have open period by the process of deleting the company and plant assignme

  • Camera settings for making youtube videos

    I have a Canon 60D and CS4 master collection with Premiere Pro and Encore.  What settings should I shoot video at in order to get the best youtube output?    My choices are 1920x1080-30; 1920x1080-24; 1280x720-60; 640x480-60; crop-640-60

  • Renaming NEF file no longer changes JPG file automatically (NOT BATCH RENAMING)

    For the last year I have been able to select a file in Bridge under the 'Content' tab and in renaming an individual NEF file, Bridge would automatically change the corresponding JPG for me. Suddenly it no longer works and I have to change each file i

  • CS6 installation failure on OsX 10.6

    On OsX 10.6.8 I keep getting a "Some items for the following product(s) could not be installed successfully. And the error logs read as: Exit Code: 6 Please see specific errors and warnings below for troubleshooting. For example,  ERROR: DF024, DW063

  • Will Java Plug-in suffice if Windows comes w/o Java?

    Just wonder if the new version of Windows comes w/o Java as it is being declared, will Java Plug-in be enough for an average user to be able to use Java applets in one's browser? Thanks for any feedback, Reshat.