Which remote works with macbook a1181 (early 2008)?, Which remote works with macbook a1181 (early 2008)?

Will the new aluminum apple remote work with my macbook a1181 or should I buy an older white model?

This is the only remote I see on Apple's site:
Apple Remote - Apple Store (U.S.)

Similar Messages

Will a Macbook pro early 2011 installation disc work on a 2007 or 2008 Macbook pro 15

My collegue's 2007 or 2008 Macbook pro 15 inch keeps getting stuck on the apple load up screen everytime he hits the power button. He doesnt know what version it is and I forgot to write down the model number of it(Ill update May 16 at 10am PST). I tried safe mode, it worked but after the loading bar gets close to 1/2 it freezes up. He can not find his installation disc that came with the computer. I have mine but its for Model # A1278 I think its snow leopard. Will the installation disc and application disc run successfully on my collegue's 2007 or 2008 Macbook pro?
I apologize if there's a similar thread out there, I couldnt find one. -

Will a MacBook Pro Early 2011 installation disc work on a 2007 or 2008 MacBook Pro 15?
No it will not.
Machine specific gray/back disks are for one model of Mac only as they only contain hardware drivers for that model, not previous ones.
The 10.6.3 white Snow Leopard retail disk will work and it's available from Apple online for a small charge.
My collegue's 2007 or 2008 Macbook pro 15 inch keeps getting stuck on the apple load up screen everytime he hits the power button.
I tried safe mode, it worked but after the loading bar gets close to 1/2 it freezes up.
This is indicative of a problem with the boot drive and the file structure retaining data on the drive.
The progress bar progressing and stopping means the fsck drive repair is failing, likley the drive incurred head shock damage at that point.
The boot drive itself is likely fine and the problem can be resolved but the disks are going to be required if it's running Snow Leopard.
First get the disks, then attempt Disk Utility > Repair Disk and check the SMART status if the drive is still good.
If there is no backup of data, get that off the machine using a external boot drive.
To fix that problem of a bad sectors, unfortutly the entire drive will need to be Zero Erased (security option > zero all data) using Disk Uility while c or option/alt key booted from the 10.6 disks (using a wired or built in keyboard), it's the only way.
This means all programs, files (remaining) and OS X will be removed in the process. You could replace the drive also.
Step by Step to fix your Mac
Create a data recovery/undelete external boot drive
How to erase and install Snow Leopard 10.6
Install/upgrade RAM or storage drive in Mac's
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents#/?p er_page=50

On my 2008 MacBook I am running 10.6.8 with Microsoft Office 10.1. Will this version of Office work if I upgrade to Mountain Lion?

On my 2008 MacBook I am running 10.6.8 with Microsoft Office 10.1. Will this version of Office work if I upgrade to Mountain Lion?

No! Even Office 2004 will not run under Lion and newer. You can check out http://www.libreoffice.org/ and iWorks applications to replace Office.
Check your applications for Mavericks compatibility here: http://roaringapps.com/
Note: a new version of Office for Mac is expected later this year or early next year. Buying Office 2011 now is buying old software. There will be no credits for older versions. The next version of Office will be subscription. This is the best option I know currently for subscription. This includes a free update to the new version when it's released.
Office 365 Home Premium 1yr Subscription
Regular List Price: $99.99 Price: $71.49 (price varies)
Licensed for one user to install on up to five devices (Mac or PC)
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

MacBook Pro late 2008 no longer working with Airport Express

Hi,
since a few days I have big problems with my MacBook Pro (late 2008) and my Airport Express. The MacBook can't find the airport express anymore, even not with the airport utility...
The Airport Express is correctly configured as my Ipod, Blackberry and Dell pc are connecting to it and do have internet access...
I can only manage the Airport Express when I'm directly connected to it with an ethernet cable.
My brother has an airport expreme, I tested it with my MacBook Pro and there it just works fine...
Can anyone help me? Has it something to do with an update for Mac OS X or the firmware from the Airport Express?
Many thanks in advance!

Thanks for the response,
1. I live in Atlanta, close enough to an Apple store. But I just know that going there will probably mean I'll have to get the logic board replaced.
2. The only thing I noticed before the first USB port started acting funny was that my battery status changed to "Service Battery". I plan on replacing it this week too.
3. Nope only difference is that my battery drains kind of fast. After about 3-4 hours of my normal usuage with it (Internet, music, videos, and sometimes using Logic) it will be time to hook up the charger.
Would replacing the battery do anything? I'm not thinking it would but figure it'd be worth a shot since I've got to replace it anyway.
And to goofyziggy,
I too noticed that most people who had this problem had some version of OSX 10.8.x

My macbook from 2008 which I bought used worked fine for 3 weeks and then suddenly it started restarting and now it restarts, goes to grey apple screen and a code saying something about a kernel panic appears and it restarts again and again. Help?

My macbook from 2008 which I bought used worked fine for 3 weeks and then suddenly it started restarting and now it restarts, goes to grey apple screen and a code saying something about a kernel panic appears and it restarts again and again. Help?

Restart the computer and immediately hold the Option key down.
Select the Recovery partition and continue.
On the next pane, select Disk Utility and continue.
When DU opens, select your hard drive in the left column, click the First Aid tab, the click Repair Disk.
When that is done, quit DU and restart in the usual way.

Problem with Macbook Pro early 2011, webcam not working in any apps and windows 7 or 8 on bootcamp, keyboard backlight not working?

Hi Guys
I recently bought a second hand early 2011 Macbook Pro 15 inch and are having 2 problems. The first is that none of the apps detects my webcam at all, the second is, i have Windows 8 installed on bootcamp but are unable to get the keyboard backlight to work in 7 or 8. The backlight works perfect in os x 10.8.5 though. I need a little bit of help guys.....

Go to Apple Menu / About This Mac. Click on More Info ... next on System Report. In the left hand column, under Hardware, select USB. The right side will show the USB Device Tree. Look through that and check for "Built-in iSight". That is your camera. If it is not listed the camera is not working.
For backlighting, try this: go to System Preferences / Keyboard. Uncheck "Adjust keyboard lighting in low light".

Macbook pro (early 2008): Trackpad not working under Windows XP

My Trackpad worked regularly under Windows (Bootcamp) and Mac OSx until some months ago my Motherboard had to be exchanged because of a fault function of the graphics card. When I started Macintosh after the Macbook pro was repaired the Trackpad worked regularly, but under windows the mouse didn't react to moving the finger or clicking. I reinstalled the drivers, but this didn't fix the problem.
What shall i do now? Thank you for any advices.

since my mac is year and two months old (funny, two months and you are screwed).
Not if you had of purchased Apple Care. You would have been covered for 3 years.
What I would like to say to the Apple:
This is not the place as Apple does not come to these forums.
These are user-to-user forums where everyday folk post "technical" questions and offer answers to each other voluntarily. No one here works for Apple nor does Apple get involved in responding. Not even sure if they "lurk."
"Say" it here -
Product Feedback

Friends, MacBook Pro 8,1 – Intel Core i5 – 2.23 GHz (early 2011) New MB Pro with OSX 10.6 – current on all updates. I successfully installed rEFit. I used Boot Camp to install Win 7. All was great. Then installed debian 6. Somehow after the debian i

MacBook Pro 8,1 – Intel Core i5 – 2.23 GHz (early 2011) New with OSX 10.6 – current on all updates.
I successfully installed rEFit. I used Boot Camp to install Win 7. All was great.
Then installed debian 6. Somehow after the debian install and restart (I know this sounds crazy) but I am now reduced to Win 7 only. rEFit is not present when rebooting nor is OSX or debian. Further, I am unable to force the install DVD to launch when rebooting, by holding C, D or F8. The Option key brings me to the grey screen with a padlock. I have attempted the root and local pw- no go. Restart holding D takes me to the windows boot manager. I have attempted several options within the Advanced Options; including – Repair Your computer, safe mode and “last known good config,” All of which did nothing.
I can see all my OSX files within win7. I tried to install the OSX within windows. Ya right, that did nothing..
I only desire to get back to OSX...
What are my options??

Yes, you royally hosed up your machine.
You should first try to get your files off, any way you can to a external drive.
Your going to need to hold c and boot from the disk that came with your computer and a couple of screens in under the menu is a option for Disk Utility.
Select your drive and Erase with Security Option Zero, format the drive HFS+ Journaled and when that's finished (about a hour or so) then quit and install OS X from the installer.
I hope this works, but I suspect it won't. Others have hosed their machines trying to use a Linux disk without proper partition formatting too.
Another option might be to use another Mac to c boot off the Snow Leopard disk and install OS X onto a external drive, take that to the problem Mac and try holding option and booting off of it to erase your internal drive.
You could replace the drive.
frederick s wrote:
The Option key brings me to the grey screen with a padlock.
Is this holding option while booting?
There was someone else around here who hosed their Mac with a Linux disk too. Try to find it.

My Mac Pro (early 2008) has odd behaviour with 8800gt

Hello Apple community,
First of all, thank you for your support and sorry if I can't explain the situation correctly. I will be concrete.
I bought a Mac Pro 3,1 (early 2008) 2 weeks after its launch with Nvidia Geforce 8800gt 512mb. It works awesome.
Each five-six months I open it and remove all the dust I can carefully. I am used to do it and I do not touch anything fragile.
The problem is that the screen flashes and then gets frozen everytime the Mac has to use hardware for graphics. When this happens, there are many dots and strypes moving arround with green and pink spots.
I made both picture and video: http://www.cl.ly/7dGD(pic)    - http://www.cl.ly/7d4U(video)
This happens in every place the Mac uses the graphic card (both browsers showing a youtube video, vimeo, etc... and time machine, which uses graphics for the background), everything get frozen but the sound doesn't until 1 or 2 minutes. When this happens, the only solution is to force shut down (press and holding the power button 5 secs).
The only hope I had was formatting. I thought I had something in my Mac user which could make this happen. So I formatted the Mac Pro last night. A clean install. Everything updated... but the error persists.
So...
- I thought the problem was Flash, but it doesn't. The solution I have for playing videos in browser is disabling the hardware option for Flash.
- I also thought the problem was the capture card but it doesn't because I tried everything without the card installed.
- I have formatted and the problem persists.
Something is wrong but I don't know what. I am now in the Mac and everythin works great. But the risk exists the moment I am playing a video, editing a video, in Time Machine, playing a game, and so on...
When this happens and the Mac restarts, it shows this info:
Interval Since Last Panic Report: 411819 sec
Panics Since Last Report: 2
Anonymous UUID: 184C346D-2B9D-47D6-B043-764960062C68
Wed Jun 15 18:46:21 2011
panic(cpu 7 caller 0×83014065): NVRM[0/2:0:0]: Read Error 0×00070000: CFG 0×061110de 0×00100406 0×92000000, BAR0 0×92000000 0×83b27000 0×092880a2, D0, P1/2
Backtrace (CPU 7), Frame : Return Address (4 potential args on stack)
0×8219b868 : 0×21b510 (0×5d9514 0×8219b89c 0×223978 0×0)
0×8219b8b8 : 0×83014065 (0×83229dac 0×8329a600 0×83238d5c 0×0)
0×8219b958 : 0×8381582d (0xbee2404 0xa417004 0×70000 0×8300c36e)
0×8219b998 : 0×83726df9 (0xa417004 0×70000 0×8219b9b4 0×0)
0×8219b9e8 : 0×8380352d (0xa417004 0xbef0804 0×1 0×1)
0×8219bab8 : 0×8380b32a (0xa417004 0xbef2804 0×0 0×1)
0×8219bbc8 : 0×8319adb7 (0xa417004 0xbef2804 0×8219bc1c 0×8219bcd0)
0×8219bd08 : 0×8319b6a2 (0xa417004 0xbefa804 0×0 0×0)
0×8219bd98 : 0×8319d858 (0xa417004 0xbefa804 0×8 0×2)
0×8219bde8 : 0×83874fe3 (0xa417004 0xbefa804 0×0 0×0)
0×8219be38 : 0×8319d970 (0xa417004 0xbefa804 0×0 0×0)
0×8219bea8 : 0×83004b32 (0xa417004 0×0 0×0 0×0)
0×8219bf48 : 0×82fb512e (0xa417004 0xaadaa80 0×8219bf78 0×29f562)
0×8219bf78 : 0×22fd0d (0xa762400 0xa417004 0×0 0×0)
0×8219bfc8 : 0×2a06dc (0×863ea0 0×0 0×10 0xb218524) Kernel Extensions in backtrace (with dependencies): com.apple.nvidia.nv50hal(3.0.4)@0×83713000->0×83b26fff dependency: com.apple.NVDAResman(3.0.4)@0×82fad000 com.apple.NVDAResman(3.0.4)@0×82fad000->0×8329bfff dependency: com.apple.iokit.IOPCIFamily(2.6)@0×787b6000 dependency: com.apple.iokit.IONDRVSupport(2.2)@0×820cd000 dependency: com.apple.iokit.IOGraphicsFamily(2.2)@0×82114000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
10J869
Kernel version:
Darwin Kernel Version 10.7.0: Sat Jan 29 15:17:16 PST 2011; root:xnu-1504.9.37~1/RELEASE_I386
System model name: MacPro3,1 (Mac-F42C88C8)
System uptime in nanoseconds: 234842586427
unloaded kexts:
com.apple.driver.AppleFileSystemDriver     2.0 (addr 0×81c99000, size 0×12288) – last unloaded 122689357441
loaded kexts:
com.vmware.kext.vmnet     3.1.3
com.vmware.kext.vmioplug     3.1.3
com.vmware.kext.vmci     3.1.3
com.vmware.kext.vmx86     3.1.3
com.apple.driver.AppleHWSensor     1.9.3d0
com.apple.filesystems.autofs     2.1.0
com.apple.driver.AudioAUUC     1.54
com.apple.driver.AppleUpstreamUserClient     3.5.4
com.apple.driver.AppleIntelPenrynProfile     17
com.apple.Dont_Steal_Mac_OS_X     7.0.0
com.apple.driver.AppleMCCSControl     1.0.17
com.apple.driver.AudioIPCDriver     1.1.6
com.apple.driver.AppleHDA     1.9.9f12
com.apple.GeForce     6.2.3
com.apple.driver.AppleIntel8254XEthernet     2.1.1b7
com.apple.driver.AppleMCEDriver     1.1.9
com.apple.driver.AirPortBrcm43224     427.36.9
com.apple.driver.ACPI_SMC_PlatformPlugin     4.5.0d5
com.apple.driver.AppleLPC     1.4.12
com.apple.iokit.SCSITaskUserClient     2.6.5
com.apple.BootCache     31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib     1.0.0d1
com.apple.driver.AppleUSBHub     4.1.7
com.apple.iokit.IOAHCIBlockStorage     1.6.3
com.apple.driver.AppleFWOHCI     4.7.1
com.apple.driver.AppleUSBEHCI     4.1.8
com.apple.driver.AppleAHCIPort     2.1.5
com.apple.driver.AppleIntelPIIXATA     2.5.1
com.apple.driver.AppleEFINVRAM     1.4.0
com.apple.driver.AppleUSBUHCI     4.1.5
com.apple.driver.AppleACPIButtons     1.3.5
com.apple.driver.AppleRTC     1.3.1
com.apple.driver.AppleHPET     1.5
com.apple.driver.AppleSMBIOS     1.6
com.apple.driver.AppleACPIEC     1.3.5
com.apple.driver.AppleAPIC     1.4
com.apple.driver.AppleIntelCPUPowerManagementClient     105.13.0
com.apple.security.sandbox     1
com.apple.security.quarantine     0
com.apple.nke.applicationfirewall     2.1.11
com.apple.driver.AppleIntelCPUPowerManagement     105.13.0
com.apple.iokit.IOSCSIBlockCommandsDevice     2.6.5 – last loaded 61580726779
com.apple.iokit.IOUSBMassStorageClass     2.6.5
com.apple.driver.AppleProfileReadCounterAction     17
com.apple.driver.AppleProfileTimestampAction     10
com.apple.driver.AppleProfileThreadInfoAction     14
com.apple.driver.AppleProfileRegisterStateAction     10
com.apple.driver.AppleProfileKEventAction     10
com.apple.driver.AppleProfileCallstackAction     20
com.apple.iokit.IOSurface     74.2
com.apple.iokit.IOBluetoothSerialManager     2.4.0f1
com.apple.iokit.IOSerialFamily     10.0.3
com.apple.driver.CSRUSBBluetoothHCIController     2.4.0f1
com.apple.driver.AppleUSBBluetoothHCIController     2.4.0f1
com.apple.iokit.IOBluetoothFamily     2.4.0f1
com.apple.driver.DspFuncLib     1.9.9f12
com.apple.iokit.IOFireWireIP     2.0.3
com.apple.driver.AppleUSBAudio     2.7.6f4
com.apple.iokit.IOAudioFamily     1.8.0fc1
com.apple.kext.OSvKernDSPLib     1.3
com.apple.iokit.AppleProfileFamily     41
com.apple.driver.AppleHDAController     1.9.9f12
com.apple.iokit.IOHDAFamily     1.9.9f12
com.apple.iokit.IO80211Family     314.1.1
com.apple.iokit.IONetworkingFamily     1.10
com.apple.driver.AppleSMC     3.1.0d3
com.apple.driver.IOPlatformPluginFamily     4.5.0d5
com.apple.nvidia.nv50hal     3.0.4
com.apple.NVDAResman     3.0.4
com.apple.iokit.IONDRVSupport     2.2
com.apple.iokit.IOGraphicsFamily     2.2
com.apple.driver.AppleUSBHIDKeyboard     141
com.apple.iokit.IOUSBHIDDriver     4.1.5
com.apple.driver.AppleHIDKeyboard     141
com.apple.driver.AppleUSBMergeNub     4.1.8
com.apple.driver.AppleUSBComposite     3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice     2.6.5
com.apple.iokit.IOBDStorageFamily     1.6
com.apple.iokit.IODVDStorageFamily     1.6
com.apple.iokit.IOCDStorageFamily     1.6
com.apple.driver.XsanFilter     402.1
com.apple.iokit.IOATAPIProtocolTransport     2.5.1
com.apple.iokit.IOSCSIArchitectureModelFamily     2.6.5
com.apple.iokit.IOUSBUserClient     4.1.5
com.apple.iokit.IOFireWireFamily     4.2.6
com.apple.iokit.IOAHCIFamily     2.0.4
com.apple.iokit.IOATAFamily     2.5.1
com.apple.iokit.IOUSBFamily     4.1.8
com.apple.driver.AppleEFIRuntime     1.4.0
com.apple.iokit.IOHIDFamily     1.6.5
com.apple.iokit.IOSMBusFamily     1.1
com.apple.security.TMSafetyNet     6
com.apple.kext.AppleMatch     1.0.0d1
com.apple.driver.DiskImages     289
com.apple.iokit.IOStorageFamily     1.6.2
com.apple.driver.AppleACPIPlatform     1.3.5
com.apple.iokit.IOPCIFamily     2.6
com.apple.iokit.IOACPIFamily     1.3.0
Model: MacPro3,1, BootROM MP31.006C.B05, 8 processors, Quad-Core Intel Xeon, 2.8 GHz, 6 GB, SMC 1.25f4
Graphics: NVIDIA GeForce 8800 GT, NVIDIA GeForce 8800 GT, PCIe, 512 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0×14E4, 0×88), Broadcom BCM43xx 1.0 (5.10.131.36.9)
Bluetooth: Version 2.4.0f1, 2 service, 19 devices, 1 incoming serial ports
Network Service: Ethernet 1, Ethernet, en0
PCI Card: NVIDIA GeForce 8800 GT, Display, Slot-1
PCI Card: pcibdbd,a117, sppci_video, Slot-2
Serial ATA Device: OWC Mercury Extreme Pro SSD, 107,13 GB
Serial ATA Device: SAMSUNG HD501LJ, 465,76 GB
Serial ATA Device: ST31000528AS, 931,51 GB
Parallel ATA Device: OPTIARC DVD RW AD-7170A
USB Device: Keyboard Hub, 0×05ac (Apple Inc.), 0×1006, 0xfd500000
USB Device: USB-PS/2 Optical Mouse, 0×046d (Logitech Inc.), 0xc01b, 0xfd530000
USB Device: AT2020 USB, 0×17a0, 0×0002, 0xfd510000
USB Device: Apple Keyboard, 0×05ac (Apple Inc.), 0×0221, 0xfd520000
USB Device: My Book, 0×1058 (Western Digital Technologies, Inc.), 0×1100, 0xfd100000
USB Device: Bluetooth USB Host Controller, 0×05ac (Apple Inc.), 0×8206, 0×5d200000
FireWire Device: built-in_hub, Up to 800 Mb/sec
I don't know how to solve this problem...
Thank you for your help

Try this:
clone your system and repair it with Disk Warrior instead
Or try a clean test system install on another drive
A must: SmcFanControl 2.2 - a mere 400 rpm extra to keep air cooling up
Try to run w/o externals. MyBook included.
Is that a 7200.11 1TB? they had a lot of issues.
Run AHT off your OEM DVD.
2008 had to have EFI and SMC updates to deal with freezes on wake from sleep, and like all models, high inrush current. Hopefully you have a UPS and is 1500VA unit.
When you do hard restart from power button, you almost certainly add more directory errors and to files requiring immediate attention to repair and rebuild the directory; and to scan and repair and delete cache and temp files and folders. A must. Invest in bootable backups SuperDuper along with Disk Warrior (or TechTool Pro 6, maybe Drive Genius 3 but I'd rate that #3).
TimeMachine has its own bad habits, especially with Green drives and some externals.
Try to rule out everything and then add back one at a time.
And it may just be time to replace the 8800, very common, a couple threads this week, and it is 3 yrs old. Might want ATI 5870 or 5770.

I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device

I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device (iPhone) using debug build. When running with a release build, the result handler is never called (nor is the fault handler called). Viewing the BlazeDS logs in debug mode, the call is received and send back with data. I've narrowed it down to what seems to be a data size issue.
I have targeted one specific data call that returns in the String value a string length of 44kb, which fails in the release build (result or fault handler never called), but the result handler is called as expected in debug build. When I do not populate the String value (in server side Java code) on the object (just set it empty string), the result handler is then called, and the object is returned (release build).
The custom object being returned in the call is a very a simple object, with getters/setters for simple types boolean, int, String, and one org.23c.dom.Document type. This same object type is used on other other RemoteObject calls (different data) and works fine (release and debug builds). I originally was returning as a Document, but, just to make sure this wasn't the problem, changed the value to be returned to a String, just to rule out XML/Dom issues in serialization.
I don't understand 1) why the release build vs. debug build behavior is different for a RemoteObject call, 2) why the calls work in debug build when sending over a somewhat large (but, not unreasonable) amount of data in a String object, but not in release build.
I have't tried to find out exactly where the failure point in size is, but, not sure that's even relevant, since 44kb isn't an unreasonable size to expect.
By turning on the Debug mode in BlazeDS, I can see the object and it's attributes being serialized and everything looks good there. The calls are received and processed appropriately in BlazeDS for both debug and release build testing.
Anyone have an idea on other things to try to debug/resolve this?
Platform testing is BlazeDS 4, Flashbuilder 4.7, Websphere 8 server, iPhone (iOS 7.1.2). Tried using multiple Flex SDK's 4.12 to the latest 4.13, with no change in behavior.
Thanks!

After a week's worth of debugging, I found the issue.
The Java type returned from the call was defined as ArrayList. Changing it to List resolved the problem.
I'm not sure why ArrayList isn't a valid return type, I've been looking at the Adobe docs, and still can't see why this isn't valid. And, why it works in Debug mode and not in Release build is even stranger. Maybe someone can shed some light on the logic here to me.

Hi! I've got CS3 Design Standard - the actual disks and Software License certificate. It was installed on my laptop which crashed and could therefore not be uninstalled. I have now installed it on my new MacBook Pro, but cannot get it registered with the

Hi! I've got CS3 Design Standard - the actual disks and Software License certificate. It was installed on my laptop which crashed and could therefore not be uninstalled. I have now installed it on my new MacBook Pro, but cannot get it registered with the serial number. Is it because it wasn't uninstalled on the previous laptop? What to do now?? Thx!

Maybe this can help someone else... I simply had to properly uninstall CS3 and reinstall it again after that. I think that sorted it! I also remember having a similar issue with Macs at work a couple of years back. Not sure whether the same applies to CS5/CS6. Here's a link on how to properly uninstall CS3 on Windows XP, Windows Vista and Mac OS. I'm on OS X 10.9.2 but it worked just fine. Remove Creative Suite 3 and CS3 products

HT202008 I am having issues with my Window 7 on boot camp. My hardware is Macbook Pro Mid 2010 model and working on OS X 10.9.5. Recently I went to windows 7 to do a system upgrade but failed and was told to update the bootcamp drivers.

I am having issues with my Window 7 on boot camp. My hardware is Macbook Pro Mid 2010 model and working on OS X 10.9.5. Recently I went to windows 7 to do a system upgrade but failed and was told to update the bootcamp drivers. I installed boot camp5 but seem to be the wrong version and change to boot camp 4 which was updated okay. However I still cannot do the updates. Can someone advice me please? Thank you!

Please see Boot Camp: System requirements for Microsoft Windows operating systems - Apple Support for the appropriate version of drivers related to the specific version of Windows 7.
MacBook Pro
(13-inch, Mid 2010)
4
4
DVD
DVD
DVD
MacBook Pro
(15-inch, Mid 2010)
5
5
4
DVD
DVD
DVD
MacBook Pro
(17-inch, Mid 2010)
5
5
4
DVD
DVD
DVD
Be careful with Windows Updates, especially driver updates. Standard WHQL drivers can cause problems.

I am on Acrobat DC trial. On earlier versions have no problem with duplex printing. Now with DC, it's impossible. I have tried downloading latest printer software, etc, etc. Nothing seems to0 work. Any ideas please?

I am on Acrobat DC trial. On earlier versions have no problem with duplex printing. Now with DC, it's impossible. I have tried downloading latest printer software, etc, etc. Nothing seems to0 work. Any ideas please?

Ralph, Thanks for replying. There where no received SIP messages at all just the INVITE being sent but I have made some more progress. The mini does indeed just work. I can do everything that you are supposed to do to other ichat users on the internet. Very nice.
The imac is still playing up but I have got further. I had peerguardian2 installed which unknown to me doesn't need to be running to prevent you for accessing 'barred' IP addresses. snatmap.mac.com is barred in the lists! I discovered this when I saw one of your other posts showed how to turn on terminal logging for ichat. Now that I have turned off peerguardian2 (using the disable filters option) I can make calls to the testbot and see the adverts. I have even done a video conference with the two testbots. I will just uninstall peerguardian2.
However, I can not get a AV chat working to a real user....
In response to your suggestions:-
I have tried all the options for quicktime streaming but will try 1.5Mb/s again.
The ichat bandwidth limit is set to "none". I am in New Zealand and I have standard ADSL (not ADSL2+) 7.6M down 512K up. The mini config is also set to none.
Internet sharing is off.
I have had parallels on the machine but the two interfaces that it installed "Parallels Host-Guest" and "Parallels NAT" are configured 'off' and show as not connected. Is this enough? I will uninstall parallels and see if that helps since I don't use it. I also have VMware's thing installed but that doesn't seem to add any interfaces.
I need to capture a full trace of the imac to other ichat user to see what is happening but will update when I have does your suggested changes or have a trace
Thanks again

Macbook pro retina display doesn't work occasionally. Random restarts. I can remote into the computer when display isn't working correctly

I have some issue with my 2012 Macbook Pro Retina. The screen intermittently decides to just not work. Sometimes on startup i hear the start up noise but the screen doesn't turn on. I am able to remote into the computer when the screen doesn't work. I can't seem to find any rhyme or reason as to when it works and when it doesn't. I've reset the PRAM and SMC sometimes that will bring the screen back sometimes not.
Any ideas?

You can try the Apple Hardware test, not definitive by any means, especially intermittent problems, but it is a start.
AHT http://support.apple.com/kb/HT1509
I think i would take it in for a free 'Apple Service Diagnostics' test
Genius reservation http://www.apple.com/retail/geniusbar/
on-line https://getsupport.apple.com/GetproductgroupList.action
check warranty https://selfsolve.apple.com/agreementWarrantyDynamic.do

Can I use a mac pro early 2008 w/10.6 with pro tools 9 Native,

thinking of ditching pc for a mac but all my research is telling me, rather than a late model mac pro upgradeable to mavericks (not tested for pro tools), my ideal setup would be an early 2008, mac pro with 10.6. currently using a lenovo desktop with 3 motu 2408 and the 424 pcie card with pro tools 9 native and reaper 4.57. works for me but since tasting mac I would like to explore the possibilties further. i had the opportunity to set up a system for a friend who purchased an imac 21" a presonus 24.4.2, and pro tools 10 he's using half the ram I have, but his system works like a beast! I;m not the imac type so, I feel a mac pro will help me expand my power base greatly and advice on mac pro options is appreceiated....

Kappy wrote:
Then explain to the OP where he/she can purchase a retail copy of 10.6.8 Snow Leopard. I'm afraid I don't know where to get one.
As you know, there is no 10.6.8 disk, but one can clone 10.6.8 into a late 2011 MBP (from an external HDD). Niel mentions a 2012 model, you are the one who speaks of 2011 MBPs. That is why I directed the comment to you.
Ciao.

Easy print not working on a 64 bit Windows 8.1 client with Remote Desktop connection version 8.1

Easy print is not working on a 64 bit Windows 8.1 client with Remote Desktop connection version 8.1 . Printers dont get redirected when you connect to the terminal server. The server we are connecting to has Windows 2008 server. On 32 bit Windows
7 and windows XP clients Easy print is working fine and printers get redirected in terminal server.

I am having the exact same problem. Windows 7 works fine, but 8.1 will not redirect printers. Others said to check local policy terminal services settings and my setting are all set as they should.
I think Windows 8.1 is not telling the terminal server what printers it has.

Which remote works with macbook a1181 (early 2008)?, Which remote works with macbook a1181 (early 2008)?

Similar Messages

Maybe you are looking for