Which setting do I need to capture at the highest resolution possible?...

...capturing from Digi Beta to Final Cut HD on a G5?
Thanks for any help,
Alex

What Shane said - you'll need a 2 drive RAID to reliably capture and playback 10 bit uncompressed. 8 Bit you can usually do with a single drive and is most often indistinguishable from 10 bit. You generally need 10 bit when you are doing soft mono-chromatic gradients...
Patrick

Similar Messages

  • Is there some setting to obtain the highest resolution photos?

    I want to burn to a DVD to show on a large screen and want to get the highest resolution possible in the photos. Are there any settings I need to know about?

    iPhoto's Slideshow outputs are pretty limited. With iMovie or an app like PhotoToMovie you can create a slideshow (with more control) with greater output options.
    Regards
    TD

  • I have a 5minute video in iMovie'11. I need to export in the highest quality for projection in a cinema theatre. Please advise as to best setting to accomplish this.

    I have a 5minute video in iMovie'11.
    I need to export in the highest quality for projection in a cinema theatre.
    Please advise as to best setting to accomplish this.

    If it looks good on your tv it will look good at the cinema.
    The resolution will still be 720x480/576 if a dvd player is hooked up to the projector.

  • IMovie to iPod - what is the highest resolution setting possible?

    I'm creating an iMovie and i want to save it to my 30gb video ipod, and then play it back on a lcd projector to a 12 foot screen (for a presentation in a room full of people). If i use the standard 320x240 resolution, i'm pretty sure it will look very pixelated when shown on a 720p lcd projector on a 12 foot screen.
    What is the highest resolution you can save your iMovie to an iPod, and then playback on a high resolution TV? I've tried several settings, but none are recognized by the ipod.
    Thanks!

    Thanks for the info. I do not have a laptop (well, not a Mac laptop - bummer), and dragging my 20" imac will be a pain. I always bring backups, so i will also burn DVD and copy to video camera.
    Just thought it would be cool to walk and plug in my ipod to the projector. Pretty sure no one in my group has seen that before.
    Last question... can i export from imovie with the higher settings, or do i need to save to destop and then export with quicktime?
    Thanks!

  • MacBook Pro retina 13" (late 2013, Haswell) why is the highest resolution rendered in 3360x2100, which the system obviously can't handle?!

    Hey Apple and Apple users,
    I just recently switched from an MacBook Air (mid 2013) to the new Haswell MacBook Pro retina 13" (late 2013 model).
    The main reason to do so was the better screen and the option to run higher scaled resolutions, as advertised.
    I was willing to trade in the Air's low weight, smaller formfactor and the extra batterylife for the better screen.
    When it comes to resolutions:
    1280x800 is just a joke nowadays, why is the MacBook Pro still based on it? 13" and 1440x900 work quite fine...see MacBook Air.
    1440x900 is okay in everyday life situations, but sometimes you just need "more space" as the third scaling option calls it as well in the display-settings.
    1680x1050 on 13" can sometimes be challenging, but it is really fine if you need to work and have a lot UI elements to deal with (Photoshop etc.)
    So 1680x1050 scaled on the 2560x1600 screen would be my daily driver for work. So I expected a scaling factor of "1.5238..." (2560/1680) will be used most of the time.
    Frankly spoken...I am really disappointed by the 13" retina MacBook Pro and the way OS X Mavericks is handling the scaling.
    It obiously works well and responsive with the 1280x800 non-scaling resolution ("best for retina, scaling factor 2: 1280 --> 2560).
    Is still "okay-snappy" at 1440x900 (scaling factor 1.777...: 1440 --> 2560).
    But it totally breaks down at 1680x1050 (scaling factor 1.523...: 1680 --> 2560).
    I use "Mission Control" all the time and it is stuttering and slow...overall a sluggish and unbearable experience.
    The same goes for Desktop-Switching by swiping the screens or resizing and moving windows and files around.
    So I was wondering why...and then I noticed that when taking a screenshot of my entire screen (CMD + 3) the image size of the screenshot was 3360x2100 and not the expected 2560x1600.
    This means Mavericks is not scaling the UI with the appropriate factor (see above). For retina MacBooks it ist simply rendering one pixel of the classic, non-retina Interface in now 4 pixels (2x2) and sending this straight to the screen, which then "scales" it down to the resolution it is able to display.
    Why is this bothering me? – Because the machine has to do a lot more work to render the higher resolution that can't even be displayed, due to the screens limitations.
    2560x1600 = 4096000 pixels = 100%
    3360x2100 = 7056000 pixels = 172%
    This means the MacBook has to render 72% more information than actually can be displayed on the built-in screen and are just lost.
    Of course this makes the overall UI feel sluggish and idly! Especially with the not that performant Intel Iris IGP and no dedicated graphics card.
    All this extra "rendering" just results in a worse battery life due to the extra work that the graphics card and CPU have to do.
    First, Apple...are you serious about this?
    What can we do about this?
    Is there a way to have this properly scaled?
    Thanks in advance to everyone.

    Okay...I thought deeply about this issue.
    Even looking into ways to maybe fixing this on the software side. But it occured to me that this is to deeply embedded into the system that it won't be possbile to come up with a sufficient third-party solution.taht
    The problem is that there is no intermediate step inbetween "standard DPI" graphics and "HiDPI" (image-resources named "[email protected]").
    But there should be one, to minimize the amount of image information that needs to be processed by the device.
    This effects especially the MacBook Pro retina 13", as it has the less powerful Intel Iris IGP, when performing on the highest scaled resolution (equivalent to 1650x1080).
    As well as the MacBook Pro retina 15" without a dedicated, second Graphics Unit,when performing on the highest possible scaled resolution (equivalent to 1920x1200).
    Those devices don't have enough resources to handle the consequential "HiDPI" resolutions of 3360x2100 for the 13" and 3840x2400 for the 15" model.
    (Comment: 3840x2400 = 9,2MP, which is more than the standard 4K resolution of 3840x2160.
    I analyzed the scaling factors as follows:
    Factor "2" to display 1280x800 on the 13" model and 1440x900 on the 15" model in HiDPI.
    Factor "1.777..." would be required to display 1440x900 on the 2560x1600 screen of the 13" model.
    Factor "1.714..." would be required to display 1650x1080 on the 2880x1800 screen of the 15" model.
    Factor "1.523..." would be required to display 1650x1080 on the 2560x1600 screen of the 13" model.
    Factor "1.5" would be required to display 1920x1200 on the 2800x1800 screen of the 15" model.
    As all the models seem to have no problem with rendering the intermediate scaling step (1440x900 for the 13" and 1680x1050 for the 15" model) at HiDPI, hence with the scaling factor 2. There is no real need to provide the UI-elements.
    But in my opinion there is a strong need for a "MidDPI" ([email protected]) intermediate step for all the UI graphic elements that wis based on the scaling factor 1.5.
    This would result in the following:
    13" MacBook Pro retina with 2560x1600 screen:
    1280x 800 @ 2x = 2560x1600 (no surplus, native screen resolution)
    1440x 900 @ 2x = 2880x1800 (the surplus of 1088000px = ~1MP can still be handled and compansated by the weak Iris IGP)
    1680x1050 @ 2x = 3360x2100 (the surplus of 2960000px = ~3MP is too much for the weak Iris IGP)
    NEW 1680x1050 @ 1.5x = 2520x1575 (with a small border of left=20px, bottom=13, right=20, top=12 pixels, which means ~2,2mm and ~1.3mm around the 1.5x scaled image!).
    15" MacBook Pro retina with 2880x1800 screen:
    1440x900 @ 2x = 2880x1800 (no surplus, native screen resolution)
    1680x1050 @ 2x = 3360x2100 (the surplus of 1872000px = ~2MP can still be handled by the Iris Pro IGP)
    1920x1200 @ 2x = 3840x2400 (the surplus of 4032000px = ~4MP can't be handled sufficiently by the Iris Pro IGP)
    NEW 1920x1200 @ 1.5x = 2800x1800 (nu surplus, native screen resolution, no border needed!)
    The big advantage is that all the graphics have already been remodeled for the HiDPI mode.
    So scaling those "factor 2x" images down to "factor 1.5x" should be comparably easy!
    Example:
    Left: Traditional "standard DPI" icon of "all my files".
    Right: "@2x.png" for the "HiDPI" modes.
    Middle: "@1.5x.png" suggestions for the "MidDPI" mode; easily scaled down from the lovely HiDPI graphics.
    With this simple introduction of the "MidDPI" modes a significant amount of processing power can be saved.
    This not only improves battery life when driving those higher scaled resolutions, but also lets the user access those resources for what really matters: processing power for the primary job that the Mac needs to get done.
    Thanks in advance.

  • Which DVD to iPod Method (for windows) has the highest quality?

    Hi everyone! This is the first thread I have started! *pats himself on back*...
    ...O.K. down to buisness...
    Does anyone know or tested which dvd to ipod conversion method is best? I have looked at most of the threads here about the conversion methods, and I was wondering which had the highest quality picture, quickest conversion time, and taks up the least memory. Feel free to post your opinions, but I feel tested responces are more helpful. Thx for your time...

    'dvd decrypter' is phenominal. all it essentially does is takes the '.vob. file off the dvd. it takes up alot of space, but the quality is perfect. somewhere on videora.com there is a link... its free too. as for a converter, ive tryed most of them, and totally preferred videora, onyl because it converts any type of file.

  • I cannot sign in in my imessage account. which password do i need? isnt it the same as iTunes?

    hi, i cannot sign in to my imessage account. but the imessage account is the same as the itunes or?

    I received a similar message last night after using FaceTime for the first time on my MacBook Pro...had been using it on the iPhone for some time.  The message read:
    Dear ****,
    Your Apple ID (***kit) was used to sign in to FaceTime on a a MacBook Pro.
    If you have not recently set up a MacBook Pro with your AppleID, then you should change your AppleID password.  (and then a hyperlink to how to change your password).
    That email was a surprise because I use the system for a lot of things, but may just be an expansion to the notification system.  Actually it is good to know they are aware and alerting you to the activity.  If you DID NOT do what the email is saying you did, then you should take action.  Otherwise treat it as helpful is my theory.

  • How to capture all the values(occurrence) using Extraction Rules(correlation) in VSTS web test?

    Hi,
      I am using VSTS 2010 for performance testing and have a question about Extraction Rules functionality.  Requirement below.
    Example :
    Server Response
    <a>1</a>
    <a>2</a>
     <a>3</a>
    <a>...</a>
    we need to capture all the values with same left and right boundary. Along with the number of occurrence from the response. We need pass a random value in the
    index where the index value will be between 0 - count of values with same left and right boundary.
    How to find out the count of values with same left and right boundary.

    Thanks for Adrian's help.
    Hi PChav,
    Based on your issue, I think that the Adrian's suggestion is useful for you, so I suggest you could refer the Adrian's suggestion to check your issue.
    In addition, I suggest you could also try the rogeorge's suggestion to create a custom extraction rule to do this.
    Reference:
    https://social.msdn.microsoft.com/Forums/vstudio/en-US/ccff9f7a-d5bc-45d5-80eb-c83f9fc0e103/how-to-capture-all-the-valuesoccurrence-using-extraction-rulescorrelation-in-web-test?forum=vstswebtest
    Hope it help you!
    Best Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • I have scanned photos using an Epson V500 scanner set to jpeg format using the least compression (highest quality) setting. When I try to import the scanned jpegs into iPhoto I get an error  message saying "The file is an unrecognized format."  But if I

    I have scanned photos using an Epson V500 scanner set to scan using jpeg format at the highest quality (least compression) setting.  When I try to import the scanned jpegs into iPhoto, I get an error message from iPhoto saying "The file is an unrecognized format."  But if I reduce the quality setting on the Epson scanner to just slightly below highest quality, the images import into iPhoto just fine.  Why won't iPhoto accept jpegs scanned at the highest quality setting?  Wondering?

    What scanner format settings dis you use?  Are these color photos? If they are B/W did you scan as grayscale images?  That could be the problem.  
    Are you able to open them with Preview?  If so do a Save As, select full quality and save as a jpeg with a new file name.  See if that file will import and work as intended. 
    OT

  • Setting viewer window to highest resolution

    How do I set my Viewer Window in Final Cut Express to the highest resolution?

    Set it to 100%.

  • Arabic Character set conversion-help needed

    We have our main database running in 10g (Solaris o/s) & planning to move these to RAC 11g.
    One of our old oracle DB(8.0.5)/solaris, which is not used till recently need to upgrade to 10g Rel2.
    I know Supported direct upgrade 8.0.6/8.1.7/9i -> 10g
    Current DB: 8.0.5 (Character Set: AR8ISO8859P6)
    Target DB : 10g Rel 2 (Character Set: AR8MSWIN1256)
    I am thinking to go the following way by using exp/imp
    8.0.5(AR8ISO8859P6) -> 8.1.7(AR8ISO8859P6) -> 10G(AR8MSWIN1256)
    OR
    8.0.5(AR8ISO8859P6) -> 8.1.7(AR8MSWIN1256) -> 10G(AR8MSWIN1256)
    please advice
    thanks

    (1) At source db 8.0.5 (solaris)
    PARAMETER VALUE
    NLS_LANGUAGE AMERICAN
    NLS_TERRITORY AMERICA
    NLS_CALENDAR GREGORIAN
    NLS_DATE_FORMAT DD-MON-YY
    NLS_DATE_LANGUAGE AMERICAN
    NLS_CHARACTERSET AR8ISO8859P6
    NLS_SORT BINARY
    NLS_NCHAR_CHARACTERSE T AR8ISO8859P6
    $set NLS_LANG=AMERICAN_AMERICA.AR8ISO8859P6
    $exp sys/dba file=full251109.dmp full=y
    (2):>> At target db 10g R2 (solaris)
    PARAMETER VALUE
    NLS_LANGUAGE AMERICAN
    NLS_TERRITORY AMERICA
    NLS_CALENDAR GREGORIAN
    NLS_DATE_FORMAT DD-MON-RRRR
    NLS_DATE_LANGUAGE AMERICAN
    NLS_CHARACTERSET AR8ISO8859P6
    NLS_SORT BINARY
    NLS_NCHAR_CHARACTERSET UTF8
    NLS_COMP BINARY
    NLS_LENGTH_SEMANTICS BYTE
    NLS_NCHAR_CONV_EXCP FALSE
    $export NLS_LANG=AMERICAN_AMERICA.AR8ISO8859P6
    $imp testdba/testdba file=full251105.dmp fromuser=PROFINAL touser=PROFINAL
    *$csscan testdba/testdba FULL=Y FROMCHAR=AR8ISO8859P6 TOCHAR=AR8ISO8859P6 LOG=P6check CAPTURE=Y ARRAY=100000 PROCESS=2*
    There is EXCEPTIONAL DATA in .err file+
    clients accessing 8.0.5 dataabase uses characterset AR8IS08859P6, which is SAME as 8.0.5 database
    -CSSCAN result->>[Database Scan Parameters]
    Parameter Value
    CSSCAN Version v2.1
    Instance Name MIG1
    Database Version 10.2.0.1.0
    Scan type Full database
    Scan CHAR data? YES
    Database character set AR8ISO8859P6
    FROMCHAR AR8ISO8859P6
    TOCHAR AR8ISO8859P6
    Scan NCHAR data? NO
    Array fetch buffer size 100000
    Number of processes 2
    Capture convertible data? YES
    [Scan Summary]
    Some character type data in the data dictionary are not convertible to the new
    haracter set Some character type application data are not convertible to the new characters
    [Data Dictionary Conversion Summary]
    Datatype Changeless Convertible Truncation Lossy
    VARCHAR2 2,235,403 0 0 *1,492*
    CHAR 1,097 0 0 0
    LONG 155,188 0 0 6
    CLOB 24,643 0 0 0
    VARRAY 21,352 0 0 0
    Total 2,437,683 0 0 1,498
    Total in percentage 99.939% 0.000% 0.000% 0.061%
    The data dictionary can not be safely migrated using the CSALTER script
    [Application Data Conversion Summary]
    Datatype Changeless Convertible Truncation Lossy
    VARCHAR2 16,986,594 0 0 *1,240,383*
    CHAR 164,114 0 0 0
    LONG 7 0 0 0
    CLOB 1 0 0 0
    VARRAY 1,436 0 0 0
    Total in percentage 93.256% 0.000% 0.000%
    6.744%
    [Distribution of Convertible, Truncated and Lossy Data by Table]
    USER.TABLE Convertible Truncation Lossy
    PROFINAL.BASE_MASTER_DATAS 0 0 *362,003*
    PROFINAL.CODE_ALLOW 0 0 *53*
    PROFINAL.CODE_ALLOWANCE_TYPES 0 0 *1*
    PROFINAL.CODE_BONUS_TYPES 0 0 *2*
    PROFINAL.CODE_BRANCHES 0 0 *2*
    PROFINAL.CODE_CERTIFICATES 0 0 *94*
    Kindly help,,,
    Edited by: userR12 on Nov 25, 2009 1:43 AM
    Edited by: userR12 on Nov 25, 2009 1:52 AM

  • When user click on Submit in the salesquote then this submit action needs to be captured in the BeforeSave script file

    Hi Expert,
    Explanation:
    In the sales quote there is a Submit in the Action Menu, so when a user click on the submit button then sales quote approval process triggers and
    sales quote saved with Approval status as "In Approval" .
    Requirement: Each time user click on the submit of sales quote then we have to record this action and update our BO for further calculation.
    Issue: All BO elements in the ActionValidation-Submit script file are accessible but they are read only so can not be modified.
              So when you click on the Submit then immediately after submit action event beforesave gets trigger, so we build logic here but issue is that we           are not  able to segerate this save even, I mean which SAVE is coming from the EXPLICIT save button on the UI or which save being triggered           from Submit Action.
    Resolution tried: We found only one script for the submit action ActionValidation-Submit script file so we implemented this script but here all BO                          elements are read only, we can not modify those elements.
                             Even we are not able to return any variable on the validation submit script. so only we can return true/false that says validation is                          success or not.
    My Question : How to capture the information in the event before save when user click on the submit on the sales quote.
                             So other than valiation script file is there any other appraoch by which I can acheive this. even in the global variable "this"  I also dont                          find any varaible that is setting as true/false that refers to action triggers on the sales quote.
    Thanks
    Asaad

    Thanks Meghana.. Appreciate your input.
    We are doing this but the issue we are encountering is after the submit if other user changes sales quote and click on the SAVE button then we dont want this save from SAVE button on UI, so always whenever user click on the submit from action menu in the sale quote then we need to capture user information at the submit click.
    Thanks
    Asaad

  • Need to Capture porReqLineId from ShoppingCartPG dynamically

    Hi,
    My Requirement
    From the Shopping Cart Page in iProcurement I have to link a custom form for each line where the users will be able to enter some additional information and based on the information some validations will be done after which the data will be stored in a custom table.
    What needs to be done and what I have done till now
    I have extended the Controller of the Shopping Cart Page. Created a Submit Button and added the button dynamically to each line of Shopping Cart. Set a fireActionEvent to the button. So when the user clicks on the button it should open a new custom page with the Requisition Line ID as a parameter.
    My Problem
    I am unable to capture the Requisition Line ID.
    I have tried the following step
    1. Created a Extended Controller by extending the ShoppingCartCO
    2. In processRequest created a Submit Button named it as "Additional Info" and assigned it to the Table. So it will show a Button in the result table of the Shopping Cart.
    3. Assigned a Fire Action for Submit Button in processRequest using setFireActionForSubmit method. So when the "Additional Info" button is clicked it raises the event set in Fire Action.
    4. In processFormRequest method of the extended CO handled the event by
    if ("addnInfoEvent".equals(paramOAPageContext.getParameter(OAWebBeanConstants.EVENT_PARAM))).
    In this i tried to capture the porReqLineId which is a formParameter using the following
    Number localNumber = 0;
    try {
    localNumber = new Integer(ClientUtil.getDecryptedParameter(paramOAPageContext, "porReqLineId"));
    catch (Exception e) {e.printStackTrace();}
    String outmsg="Line ID : " + localNumber + ":" + str + ":" + strEvent;
    throw new OAException(outmsg,OAException.INFORMATION);
    5. Then I am personalizing the ShoppingCartPG and assigning the new extended controller to the page.
    6. So for the time being I need to capture the porReqLineId and pass it to the new custom page as a parameter. But this is not happening and when i click on "Additional Info" button it doesnt provide me the porReqLineId.
    My Whole Code is pasted below
    ===================================================================
    package xx.oracle.apps.icx.custom.webui;
    import oracle.apps.fnd.framework.OAApplicationModule;
    import oracle.apps.fnd.framework.OAException;
    import oracle.apps.fnd.framework.webui.OAPageContext;
    import oracle.apps.fnd.framework.webui.OAWebBeanConstants;
    import oracle.apps.fnd.framework.webui.beans.OAWebBean;
    import oracle.apps.fnd.framework.webui.beans.form.OASubmitButtonBean;
    import oracle.apps.fnd.framework.webui.beans.table.OATableBean;
    import oracle.apps.icx.por.common.webui.ClientUtil;
    import oracle.apps.icx.por.req.webui.ShoppingCartCO;
    public class XXBBShoppingCartExtend14CO extends ShoppingCartCO {
    public XXBBShoppingCartExtend14CO() {
    public void processRequest(OAPageContext paramOAPageContext, OAWebBean paramOAWebBean)
    super.processRequest(paramOAPageContext, paramOAWebBean);
    OATableBean otbRN=(OATableBean)paramOAWebBean.findIndexedChildRecursive("ItemTableRN");
    OASubmitButtonBean oasb= (OASubmitButtonBean)paramOAPageContext.getWebBeanFactory().createWebBean(paramOAPageContext,"BUTTON_SUBMIT");
    oasb.setID("addnInfo");
    oasb.setUINodeName("addnInfo");
    oasb.setText("Additional Info");
    otbRN.addIndexedChild(oasb);
    oasb.setFireActionForSubmit("addnInfoEvent",null,null,false);
    public void processFormRequest(OAPageContext paramOAPageContext, OAWebBean paramOAWebBean)
    OAApplicationModule localOAApplicationModule = paramOAPageContext.getApplicationModule(paramOAWebBean);
    String strEvent= paramOAPageContext.getParameter(EVENT_PARAM) ;
    String str = paramOAPageContext.getParameter("event");
    if ("deleteLine".equals(str))
    Number localNumber = 0;
    try {
    localNumber = new Integer(ClientUtil.getDecryptedParameter(paramOAPageContext, "porReqLineId"));
    catch (Exception e) {e.printStackTrace();}
    String outmsg="Line ID : " + localNumber + ":" + str + ":" + strEvent;
    throw new OAException(outmsg,OAException.INFORMATION);
    if ("addnInfoEvent".equals(paramOAPageContext.getParameter(OAWebBeanConstants.EVENT_PARAM)))
    Number localNumber = 0;
    try {
    localNumber = new Integer(ClientUtil.getDecryptedParameter(paramOAPageContext, "porReqLineId"));
    catch (Exception e) {e.printStackTrace();}
    String outmsg="Line ID : " + localNumber + ":" + str + ":" + strEvent;
    throw new OAException(outmsg,OAException.INFORMATION);
    ===================================================================
    Here I also tried to modify the Oracle defined event of "deleteLine" by just capturing and printing the Req Line ID. This is happening in the case of "deleteLine" event but not in the case of "addnInfoEvent" event.
    Please help me on this.
    Thanks in advance.
    Regards,
    Rohit Subudhi
    Edited by: 929000 on May 8, 2012 12:42 AM
    Edited by: 929000 on May 8, 2012 1:22 AM

    Hi,
    I have used the following in processRequest
    String pageName = paramOAPageContext.getRootRegionCode();
    Hashtable params = new Hashtable (1);
    params.put ("param1", pageName);
    Hashtable paramsWithBinds = new Hashtable(1);
    paramsWithBinds.put ("param2", new OADataBoundValueFireActionURL(oasb, *"${oa.encrypt.current.RequisitionLineId}"));*
    oasb.setFireActionForSubmit("addnInfoEvent",params,paramsWithBinds,false,false);

  • I need free network analyzer software for my mac. we are trying to monitor what software may be running which is causing our internet to fail, although the internet is still coming into our modem.what is recommended?

    My internet keeps 'tripping' at or around the same period time each day.  We have already replaced our modem from our internet provider and we bought a new airport extreme router. We do not believe these were the cause, although we have now ruled them out as a cause.  Everytime the internet fails, our internet provider company tells us that there is still plenty of signal coming into our house. There is something going on inside we believe, and a technician set up our Network Utility to run a continuous ping test to capture information about when it 'trips' againn.  Yesterday, it happened again, and when he checked the data out, he said he is sure there is something 'running in the background' on my IMac.  He advised me to download a free Network Analyzer so he could further investigate what is was that was causing the problem, so I need a free network analyzer software for my Mac. The issue has been going on for a long time, so it is not the new operating system, Lion. This morning, we changed the radio channel from 'auto' to 'manual' and set a new channel, hoping that might help. We are trying to find out what program may be running (even a tiny one in the background) which is causing our internet to fail, although the internet is still coming into our modem. What is free downloadable product is recommended?

    Will Activity Monitor and/or Network Utility, both already in the Utilities folder on your Mac, help in trying to diagnose the problem.
    If you are connecting via wifi what encryption are you using? If you're using the Exteme I doubt that you are using WEP, but worth checking as it seems Macs don't like it and work better using WPA.

  • Which cable do I need to connect my Mac Book Pro to my Panasonic PV-GS150 video camera for transferring video to iMovie?

    which cable do I need to connect my Mac Book Pro to my Panasonic PV-GS150 video camera for transferring video to iMovie?

    I totally understand.
    Check some things from here, I have 2 and they have been great so far.
    Check here, lots of storage and reasonable prices. Also great support, you get to speak to a person
    Clean off your on the G5 drive and off you go.
    I suggest buying a second drive and setting it up for a back up, Time Machine or Carbon Copy Cloner, or SuperDuper (both "bootable" back up) All searchable on the web.
    http://eshop.macsales.com/search/elite+pro
    You can talk to a person for REAL advice, Phone: 800.275.4576  Ask about exporting to your G5 and and exporting to your existing OSX, you may only need a small inexpensive drive for this.
    Quick delivery and willing to help.
    Hope this makes you back up and running :-)
    Do get a back up drive, as it is not ""whether my drive will fail, as much as "when my drive fails"
    All the best

Maybe you are looking for