Which slot should i install my X-Fi

I'm about to change my motherboard soon to a Gigabyte GA-965P-DS3 rev 3.3. Which slot on that board doesn't share its IRQ with other devices, or in other words, which slot is the safest to install the soundcard in (to avoid potential resource conflicts)?
Would appreciate a quick reply. Thanks!

Put the card in the slot far away from graphic card. This is because of EMI disturbing your sound-output. In windows, if you PC supports APIC your chances are very good do not have any IRQ-Sharing. The BIOS- Message wont give you the needed info for IRQ sharing anymore. In windows there are 24! IRQ' s , your BIOS only has access to 6.

Similar Messages

  • Which slot should I install my Blackmagic Intensity Pro PCIe card?

    Hi there,
    I just purchased myself a Blackmagic Design Intensity Pro capture card. It's a x1 lane PCIe card and according to the manual, it should work in any PCIe slot on the Mac Pro. However, in the readme file, it states, "If using a Mac Pro, it is recommended to use PCIe slot 4 for Intensity capture cards."
    What exactly does this mean? Does this mean it's recommended to use the x4 lane slot? Or the 4th slot in the Mac Pro? I'm a little confused.
    Thanks for your time and I hope to hear from someone soon.
    Regards,
    Daniel

    Depends when it was written, and for which Mac Pro.
    Does it support 16x slots? maybe. But slots 3&4 are 4x and #4 refers to the top most just under the hard drives.
    Some cards use to run best in 8x slot which was slot #4 on early Mac Pro but which was also PCIe 1.1.
    Mac Pro 2008 and later, doesn't matter.
    Apple had trouble with their own Fibre Channel card not working correctly in 2008, and not working to full bandwidth.
    I passed answering before because you just need to look at what your PCIe slots provide.

  • Do i need to install and anti virus software on my macbook air? if yes, which one should i install?

    Do i need to install and anti virus software on my macbook air? if yes, which one should i install?

    Welcome to Apple Support Communities
    OS X has got its own security systems, so you don't need any antivirus. Furthermore, they will only slow down your computer. If you want more information, read > http://www.thesafemac.com/mmg
    If you want an antivirus, install ClamXav, but you don't need an antivirus

  • Which GUI should I install so as to login to SolMan 4.0?

    Which GUI should I install so as to login to SolMan 4.0?
    There are many options like
    1.SAP GUI for windows
    2. SAP GUI for java
    I want to install SAP- Netweaver 2004s on AIX 5.3(using MaxDB as Database).
    I choose EP, EP Core and AS Java for installing this.
    I installed solution manager for generating "Solution Manager Key", which is required in installation of SAP Netweaver 2004s.
    How to login in Solution Manager. I haven't installed any GUI.
    Thanks

    I have installed Solman 4.0 on AIX 5.3.
    Available options are pasted below:
    000001 SAP GUI FOR JAVA
    Installation Software Component (Current View)
    000002 SAP GUI FOR WINDOWS
    Installation Software Component (Current View)
    000003 SAP GUIDED SELLING
    Installation Software Component (Current View)
    000004 SAPSETUP FOR SAP GUI
    Installation Software Component (Current View)
    000005 SAP GUI FOR JAVA 7.00
    Installation Software Component (Current View)
    000006 SAP GUI FOR WINDOWS 6.20
    Installation Software Component (Current View)
    000007 SAP GUI FOR WINDOWS 6.40
    Installation Software Component (Current View)
    000008 SAP GUI FOR WINDOWS 7.10 CORE
    Installation Software Component (Current View)
    000009 SAP GUIDED SELLING 1.0
    Installation Software Component (Current View)
    000010 01200615322000000553 Installation SAP Guided Selling 1.0
    000011 51019289 CD SAP Web AS 6.20 Inst./Upgrade Guides
    CD
    000012 51030605 CD SAP CRM 4.0 SR1 Inst./Upgrade Guides
    CD
    000013 51031650 CD SAP R3E 4.7x2.00 SR1 Upg./Inst.Guides
    CD
    000014 51031651 CD SAP CRM 4.0 SR1 Inst./Upgrade Guides
    CD

  • How do i know which updates should i install?

    iv'e read in a guide apple wrote that some firmeware and software updates will not update automatically with the software update tool.
    how can i tell which updates should i install?
    i have a 2 weekds old new macbook pro 13' non retina(1200$ version) , unmodified.

    Read here:
    http://support.apple.com/kb/HT1338

  • Which Hardrdrive should I install in Mac Pro, 13", Late 2011, 2.8Ghz i7 4RAM 750H

    Please could you tell me Which Hardrdrive should I install in Mac Pro, 13", Late 2011, 2.8Ghz i7 4RAM 750H
    Tx

    Any 2.5" diam formfactor SATA HDD or SSD will be compatible.  As a start, look at the representative sample available from OWC:
    eshop.macsales.com/shop/hard-drives/2.5-Notebook/
    It is very easy to do the installation yourself and it will be a lot less expensive.
    Ciao.

  • Which version should i install for Ubuntu 12.10 64bit

    which version should i install i dont wanna use beta version ?
    I am running on Ubuntu 12.10 64-bit.

    Firefox 21.0 for 64-bit Linux en-US
    http://releases.mozilla.org/pub/mozilla.org/firefox/releases/21.0/linux-x86_64/en-US/firefox-21.0.tar.bz2
    If you prefer another language then see
    http://releases.mozilla.org/pub/mozilla.org/firefox/releases/21.0/linux-x86_64/
    Otherwise you can get the new release from Ubuntu.

  • Which slot should I put in PCI card in?

    Finally going to migrate from my older Mac to my new Intel Mac. I'm in the process of putting my fiber channel card into my new machine so I can connect it to my Xserve Raid. As I was about to put the card in the new machine on slot #2, I noticed that slot #4 said "X4/RAID" on it. Now I'm wondering which slot I should put the card in. Does it matter? I can't find anything other then slot #1-2 are X16 and slots #3-4 are X4.
    Help.

    Hi
    The slot you're looking at is specifically for Apple's RAID Card. In other words if you have the Card it probably won't work in any other slot than the one marked specifically for it. More information here:
    http://support.apple.com/kb/HT3514
    http://support.apple.com/kb/HT1346
    http://support.apple.com/kb/HT2838
    You should be OK using the slot but if it bothers you any other slot will do.
    Tony

  • On a new computer, which program should I install first, Photoshop or Lightroom.

    On a new computer, which program should i load first, Photoshop or Lightroom.  I will be using both.  Thanks

    I'd say Photoshop only because some report doing it in the opposite order can cause issues with the Edit In Photoshop command.

  • Which product should i install??

    I am useing Windows 7 64-bit, which product should i download??
    - Oracle Database 10g Release 2 (10.2.0.1.0) for Microsoft Windows (x64)
    or
    - Oracle Database 10g Release 2 (10.2.0.1.0) for Microsoft Windows (64-bit Itanium)
    and could you please tell me what are the differences between x64 and x64 Itanium ??????????????
    Note: I have downloaded 64bit and i get the error :(
    thanks.

    user8944100 wrote:
    please somebody tell me what are the differences between these two operating systems???Perhaps it will make more sense when you realize that itanium is a different computer chip than the x86 and it's cousin the x86-64.
    http://en.wikipedia.org/wiki/Itanium
    The operating system is the same. The binaries, however, are different to account for the different computer chip.

  • [SOLVED] pacman: which package should I install for a given file?

    Hi there!
    I'm still trying to learn arch's essentials. A question coming up frequently is:
    Say I know I need file /usr/bin/zipinfo. How do I find out which package it's delivered in? The only thing remotely similar in the wiki is
    pacman -Qo /path/to/a/file
    but this only works for already installed packages. So what next?
    Best wishes,
    Rufus
    P.S.: google told me the package is called unzip so that's not the problem. Still, there has to be some way to get this information from the command line.
    Last edited by RufusD (2010-04-24 15:30:31)

    brilliant, thanks! I could have figured it's not a standard pacman function (since the situation is similar with debian's apt-get).
    Maybe this is worth a mention on pacman's wiki page. This is the first time arch's fabulous wiki let me down
    Last edited by RufusD (2010-04-24 15:32:35)

  • Which one should be installed first Desktop or Admin

    Hi,
    Can someone please tell me which one is needed to be installed first....
    Discoverer Desktop or Disc Admin?
    Thanks
    Kumar

    Hi Kumar,
    Disc Admin is needed first.
    You first have to set up the EUL, bussiness areas, folders, etc... After you have that set up you can connect using discoverer desktop/plus and create workbooks based off of the work you did in admin.

  • K8N Neo Platinum: Which memory slots should I use?

    I just got some OCZ Platinum Rev2 PC3200 memory.  Which slots should I install them in 1-2 or 1-3?
    I'm wondering if a 1-3 configuration could have an effect on my trying to overclock my system?  At 220FSB, I have to loosen the timings to 2.0-3-3-10 at 2.75 or 2.8 volts.  I find this oddly suspicious that I'm already forced to give extra volts to the memory at this low an FSB, and that furthermore I cannot continue to run at 2.0-2-2-10 at this FSB.
    Could my 12volt rail have an effect?  I can't get my system to post at 230FSB, no matter the voltage I give to both the CPU and memory.  I've dropped my HT to 3X, my multiplier to 9X, given my CPU 1.6V and my memory 2.8V, but I can't post.
    Wondering is getting a better, bigger PSU like the OCZ PowerStream 520 would help me with the above issues?

    Hi Chickpea,
    On top of this forum, theres a sticky, with the title of 'Memory placements & Sizing Charts' - Should answer your questions and more  
    Heres the link:  
    Memory Placement & Sizing Charts

  • Which slot....

    Hi all,
    Which slot should I install my sonnet firewire card in? Is there a preference, or will it not matter? Cheers.

    Hi Forrest,
    Thanks for the reply. I'll take my pick then! Cheers.

  • Which slot for Intensity HDMI card?

    I plan on adding an X1900 XT and a 3ware RAID card.
    Which slot should I put a BlackMagic Intensity HDMI card into?

    I love it when I can actually answer something for someone other than make suggestions.
    Les, the Intensity and Intensity Pro card works best (and awesomely) when installed in the TOP slot of your Mac Pro. X1900xt occupies the bottom and your RAID card can sit at second to top (that's where my SATA card is sitting right now). Black Magic support and I discussed this as I was getting lousy performance in another slot.
    Also, reminder, if you are using your Intensity to monitor to an HD LCD (or other HDMI tv) be sure to turn on the TV BEFORE you boot up Final Cut for best results.
    cheers and enjoy that card!
    dj

Maybe you are looking for

  • Problem with validateRegExp (problem with IE and chrome but works for firefox)

    Hi everyone, I have a simple af:inputText with an af:validateRegExp in it with pattern "([^$%# ]+([ ]*[^$%# ]+)*)$". Now when I enter a very big value in this inputText and finally add a space to it, it gives a proper validation exception in Mozilla

  • Swap size limitations / default rules

    I've been playing with software raid to speed up my hd performance. I currently have 4 x 160 gig hd's (2 x sata & 2 x pata). I got my 4'th hd today, so I did a clean install (got too much spare time) and for some reason decided to set my swap to 1gig

  • Search not working in system preferences

    The search field in system preferences has stopped working on mt G5 Dual. No matter what I search, including simple terms like 'date' or 'network' - nothing gets highlighted. Any ideas anyone?

  • Automating Goods Issue to PM Orders?

    Guys, do you know of any way of setting up automatic goods issue to PM orders? I.e. a background job that will post GI to PM orders once a day when stock is available? Regards, Kenneth

  • Multiple records in Header Iface with same orig_sys_document_ref

    Hi, I am creating an Internal Requisitions for multiple Destinations (Ship To Orgs). Requisition is getting approved and after running Create Internal Order program, orders are populating in OE_HEADERS_IFACE_ALL and OE_LINES_IFACE_ALL. But the proble