Which table are Demand Management data (MD61) are stored?

Hello guys.
I need to know in which table demand management data from (MD61, 62 and 63) are stored?
Also I need to know if there is some tips/rules to prepare a load from a file to come from Excel spreadsheet?
Is there any BADI or BAPI to load these information directly into the table?
Just for information: My current client doesn't use SAP yet. It's being planned to make the implementation in the middle of the next year...besides they use SAP in other plants around the world...
The main idea is to use MRP from SAP to get the suggestion for purchase requisitions and also planned orders and proceed the production and purchase activities in the legacy....
Please give me some instructions.
Thanks in advance.
Harlen Pinheiro
SAP PP
Brazil

Hello Harlen
This information is stored on tables PBED and PBIM.
You can use BAPI BAPI_REQUIREMENTS_CREATE to load data to demand management.
Please also take a look on the following document before opening this kind of thread:
Landing page for new users in SAP PP - ERP Manufacturing - Production Planning
BR
Caetano

Similar Messages

  • In which table the  PO delivery dates will get stored

    Hi,
    when I tae report for Plant I get the Delivery date different from that of the delivery date mentioned in the PO. Could any one sugget me where from the delivery date is picked up and what all the combination is of Delivery date.
    Best Regards
    Sridhar.k

    Hi
    check following link you will get details
    [http://help.sap.com/saphelp_sm32/helpdata/en/8d/bc383fe58d5900e10000000a114084/content.htm]
    Regards
    Kailas ugale

  • In which table does the Manage Rejection data is stored

    Hi All,
    I need some information regarding Manage Rejection.
    In which table is Rejected users data is stored. Actually what I am looking for is to look at the comments of all the rejected users by the reviewers.
    Currently I need to go into each and every request for the comments of reviewers.
    I searched for any specific table on the net but was able to find any.
    Please any help in this regard is appreciated.
    Regards,
    Nisha

    Dear Nisha,
    you can use table GRACREVREJUSER with the correpsonding reasons from table GRACREJREASON and GRACREJREASONT.
    Regards,
    Alessandro

  • Reg: In Which Table Tax Details for the invoice are stored

    Team,
    Can you please help me in which table : tax information for the invoice is stored.
    I need the following tax : QST_PAID_AMOUNT ,GST_PAID_AMOUNT, GST_CONTRA_AMOUNT information for invoice.
    Thanks.

    Hello Vinay,
    Here's the answer -
    select single *
      from SEOMETAREL
    where clsname = 'CL_BBBB'
       and reltype = '2'.
    The class for which you want to find the superslass will be the field CLSNAME, the superclass itself will be REFCLSNAME and this inheritance relationship is specified through the parameter RELTYPE.
    I don't think any further explanation is necessary.
    Regards,
    Anand MAndalika.
    p.s. Please do reward the points if this answer has helped you.

  • How to find from which table we got the data

    Hi friends ,
    How can we find from which table we r getting data in the datasource.
    I am getting data from crm system.based on that we created cubes and dsos.
    we have only one datasource.now i need to know from which table we pull the data?
    can any one give the procedure
    Thanks in advance........
    sridath

    Hi,
    Datasource / tables in the source system
    Go to RSA2 (DS Repository) in your source system and display your source system.
    If Extraction Method is 'V' - you are lucky and you see table name where data is taken from.
    If it is F* - function module is used, and you have to go thru its code to see all the tables it uses and logic how data is
    processed.
    Ext. Meth   Short text                                                                               
    V                 Transparent Table or DB View                
    D                  Fixed Domain Value                          
    F1                Function Module (Complete Interface)        
    F2                Function Module (Simple Interface)          
    Q                 Extraction Using ABAP Query                 
    A                 DataSource Append                           
    OR
    Since you have the extract structure and the extractor, you must have some transaction like the Extractor Checker RSA3. If so
    then execute ST05, switch on the trace and execute the extractor checker. Once the extractor checker presents the results
    switch off trace. The clcik on Display trace and you will see all the tables that were hit by the extractor checker to
    retrieve data and present it to you.
    Hope this helps.
    Thanks,
    JituK

  • In which table can I find data about payment runs (F110)

    Good morning,
    Can anyone tell me in which table I can find data about payment runs,which are carried out via transaction F110?
    Data about dunning runs can be found in table MAHNV, KNB5 & LFB5.
    Thank you.
    Kind regards,
    Linda

    Hi
    See in REGUH and REGUP. Also for Check payments, it can be seen in PAYR
    Jayaram

  • Which table stores Condition Pricing Date

    Dear SDN experts,
    Would like you to tell me which table stores Condition Pricing Date field (Sale Order Item)?
    Thanks,
    Khanh

    Pass VBAK-KNUMV  to KONV-KNUMV and you will get the item pricing conditions.
    the condition pricing date is stored in field KONV-KDATU
    Edited by: ksd on Dec 10, 2009 12:33 PM

  • IN WHICH TABLE WAGE DESCRIPTION,GRAND TOTAL PAYROLL ARE THERE

    HI,
       EVERYBODY CAN ANYBODY TELL ME IN WHICH TABLE WAGE DESCRIPTION,GRAND TOTAL PAYROLL,GENERAL FUND,TOTALS,GENERAL ,EMPLOYER CONTRIBUTION ARE USED.
    PLEASE TELL ME THE TABLE NAMES FOR ABOVE FIELDS
    THANKING U ALL

    Hi,
    check this link:
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PYNZ/PYNZ.pdf#search=%22IN%20WHICH%20TABLE%20WAGE%20DESCRIPTION%2CGRAND%20TOTAL%20PAYROLL%20ARE%20THERE%20in%20abap%22
    regards,
    keerthi.

  • Creative cloud says my apps are up to date & they are not! I might not be the only one!

    Ok, as always there is something not working with my creative cloud..
    Creative cloud says my apps are up to date when in fact I know they arent. Everytime I contact adobe support they either say they cant help me or make me go through the same steps over and over again until they also tell me they cant do anything..
    I would recommend more people to check if you really have the latest update for your software.
    For example Im currently on Premiere CC 7.1.0 when the newest version out is 7.2.1. I cant update them manually either.
    Im on windows 8.1 maybe more of you have the same problem without knowing it..

    Sign out from creative cloud desktop application and sign in back.

  • How to check which Table & Field is populating Data source

    Hi,
    My requirment is to check from which Table and Which field the data is extracted in the data source
    Data Source : 0MAT_PLANT_ATTR
    Field in Data Source :  MINBE
    Now i want to check from where (Table/Field) in R/3 is populating the Field MINBE in Data source 0MAT_PLANT_ATTR
    How can i do that

    Hi,
    Since you have the extract structure and the extractor, you can try Extractor Checker RSA3.Execute ST05 (activating SQL Trace), switch on the trace and execute the extractor checker. Once the extractor checker presents the results
    switch off trace. The clcik on Display trace and you will see all the tables that were hit by the extractor checker to retrieve data and present it to you.
    Note: Set the break point in the Extractor Function module.
    View the ST05 Extended Trace list. The Object name shows the Tables accessed.
    Hope this helps.
    Thanks,
    JituK

  • Which table has auc to wbs element relationship stored

    Hello everyone,
    I have to write a report on costs for AUC.  I have following scenario:
    auc1-----wbs2--internal order4
    ............... |----
    internal order3
    ............... wbs1----internal order1
    ............... |------internal order2
    ............... |
    auc2-----wbs3 -
    internal order1
    I tried my best to depict the scenario in the picture.....so basically i want auc1 cost.....now client does not want to see wbs3 element...since it is settling to auc2.....if i put in the project def in the following bapi(BAPI_PROJECT_GETINFO)...i get all the wbs elements..since there is a settlement from wbs1 to wbs3..is there any table which can give me relationship...or which can tell me that which wbs is settling for which auc....
    Thanks...i hope i was able to explain my question....
    appreciate the help....
    AS.

    Hi all, thanks for all the help and support on this...I found a way to get all the CO settlement doc numbers for a project and their relationship as sender and receiver..... first i went to anla and anek to get the AUC and the wbs settling to this AUC relatiionship...once i got my main wbs element...i found all the wbses for this project. I need to use the table AUAK, AUFK, and AUAA to get all that information. I got all my wbses for a project first....than I went to table AUAK with all these wbses...and found the belnr(settlement doc numbers)....this table does not give out complete settlement doc numbers for wbses....we need to go back to AUAK with the internal orders to get the belnrs for them as well....so to get all the internal orders for a project i went to AUFK....than i took these orders and went back AUAK with these orders and got my missing belnrs.... now I had all my belnrs for a project....so i went to table AUAA and did the select with these belnr...and since now i have the primary key the access is lighting fast....by doing that select i got all my relationship, i mean which settlement is goind where... mind you that I used AUAS to get the sender/receiver relationship with the amount....this is as well a cluster table but we have the primary key belnr(co settlement doc. numbers)...so no worries to get the data here as well.... here are my selects for AUAK, AUFK and AUAA....
    TYPES: BEGIN OF prps_ty, psphi TYPE prps-psphi, END OF prps_ty. DATA all_proj TYPE STANDARD TABLE OF prps_ty. DATA wa_all_proj TYPE prps_ty. TYPES: BEGIN OF objnr_ty, objnr TYPE auak-objnr, END OF objnr_ty. DATA lo_p_psp TYPE STANDARD TABLE OF objnr_ty. IF all_proj IS NOT INITIAL. SELECT objnr FROM prps INTO TABLE lo_p_psp FOR ALL ENTRIES IN all_proj WHERE psphi = all_proj-psphi. ENDIF. IF lo_p_psp IS NOT INITIAL. SELECT belnr objnr FROM auak INTO TABLE tab_auak FOR ALL ENTRIES IN lo_p_psp WHERE kokrs IN p_kokrs AND gjahr IN p_gjahr AND objnr = lo_p_psp-objnr * AND objnr LIKE 'PR%'. SORT tab_auak BY belnr. DELETE ADJACENT DUPLICATES FROM tab_auak COMPARING belnr. SELECT aufnr objnr pspel FROM aufk INTO TABLE tab_aufk FOR ALL ENTRIES IN lo_p_psp WHERE bukrs IN p_bukrs AND kokrs IN p_kokrs AND pspel = lo_p_psp-objnr. ENDIF. *get the belnrs for orders---this part is very important or we miss out all the belnrs for I/O... IF tab_aufk IS NOT INITIAL. SELECT belnr objnr FROM auak INTO TABLE tab_auak2 FOR ALL ENTRIES IN tab_aufk WHERE kokrs IN p_kokrs AND gjahr IN p_gjahr AND objnr = tab_aufk-objnr. ENDIF. *append these new belnrs to tab_auak LOOP AT tab_auak2 INTO wa_tab_auak2. * CONCATENATE 'PR' wa_tab_aufk-pspel INTO wa_tab_auak2-objnr. APPEND wa_tab_auak2 TO tab_auak. ENDLOOP. SORT tab_auak. "by belnr. DELETE ADJACENT DUPLICATES FROM tab_auak. *now get all the belnrs for this project...complete list.... IF tab_auak IS NOT INITIAL. SELECT belnr aufnr pspnr anln1 coobjnr FROM auaa INTO TABLE tab_auaa FOR ALL ENTRIES IN tab_auak * WHERE pspnr = wa_wbs-posnr WHERE belnr = tab_auak-belnr AND emtyp = 'PR' AND bukrs IN p_bukrs AND kokrs IN p_kokrs. ENDIF. SORT tab_auaa BY pspnr belnr.
    I used our own indexes for all the transparent table accesses.... to speed up the process...you might want to create your own indexes depending on the where clauses for transparent tables..... well thanks again..and hope all this will help someone else too.... AS...

  • Want to know in which table is the sessionid for a user stored

    Hello,
    I am using Obiee 10g .
    I would like to create a report having users and the no of sessions they logged in.
    In obiee setting->admin ->manage sessions i can see the session id.
    Can i just know where are they stored.
    I have S_NQ_ACCT table in my db but that have the user but don't have the session id.
    Thanks

    Hi user,
    I wanted to know how to frame the query if the table is v$active_session_history as there are so many columns then how ill know which is related to dashboard and which are not?
    Write a query in your TOAD or SQL plus in the DB that ur using for obiee ,this is the query select sample_time,client_id,session_id from v$active_session_history where session_id=30987
    and check your dashboard manage sessions for the session id and incorporate it in the where clause so you can know which user has run the report.
    hope helps you.
    Cheers,
    KK

  • In which table is the Serice Order status is stored?

    Hi Friends,
    We have a requirement to get the Service Order Status in BI, so that when ever the SO is closed (CLSD status, in IW33 Tcode ) we can restrict in BI.
    If we can know in which table is this stored, i can enhance the DS 2LIS_18_I3HDR which is populating in Service Orders Infocube.
    Have any one have idea in which table are status stored (Like the SO status will be like CRTD....CLSD etc)
    Thank you,
    Raghu

    Hi Pravender
    These tables did not help me, is there any other table with both fields AUFNR and also field relevant to SO Current status.
    Thanks
    Raghu
    Edited by: raghuram alamuri on Feb 16, 2010 11:52 AM

  • In which table the design of smartforms will be stored

    hi
    experts,
    i want to know the layout design.
    when we create sf we design window
    i want to know about the coordinates of window in which table it store
    eg.window1(x,y).

    Hi,
    In the FM generated for the smartform, it retrieves the data from clusters from the code line.
    IMPORT HEADER   TO %HEADER
            REFTAB   TO %REFTAB
            DOCSTRUC TO %DOCSTRUC
            TABDEF   TO %TABDEFS
            FROM DATABASE STXFCONTR(SF) ID %FULLNAME.
    where %FULLNAME holds the smartform name.
    Regards,
    Ram
    Edited by: Ramakrishna Peri on May 14, 2009 12:30 PM

  • Hi All, In which tables the packages , programs and program texts stored

    Hi All ,
             I want to display all the programs under a package with its package name , program name , program text and the created user if possible table ..for that i need in which tables all the packages will be store and in which i need program and its text will be stored and also created user's .
    Please provide the solution ASAP.
    Thanks & Regards,
    Bharat

    Hi,
    Check These..
    TDEVC : Packages
    REPOSRC : Report Source Code
    TADIR : Directory of Repository Objects
    Arunima
    Edited by: Arunima Rudra on Nov 20, 2008 9:34 AM

Maybe you are looking for

  • Ipod failing to sync properly and cover art does not copy

    Hello. My ipod wont sync properly, fails after about 10 albums with unknown error -53, and album cover art does not copy (fine in itunes). Have restored etc. Have uninstalled and reinstalled itunes software etc. Have tried apple support helpline; sen

  • Using a text file to make a query

    Hello and sorry to disturb.. but as a newbie I hope to find solution to my problem... My users produce a text file that contains for each line an id (primary key). My goal is to let them easily use that file as a part of a query that I define. e.g. t

  • Sound but no picture on Apple TV airplay from macbook

    Hi, To give a little more depth to this. I was working on a presentation on my Samsung TV on airplay connected through Apple TV, I left the room and then the external display had gone blank. I am able to connect with airplay and sounds can be played

  • Computer died how do I recover files?

    How do I get my purchased downloads back?

  • Items Not Sync'ed Message?

    I am getting a message that "40 items did not sync, see iTunes for details" or something along those lines, but in nothing can I find a report or how to get iTunes to tell me what did not sync!