Which user type to user for RFC receiver channel
Hi Forum,
I m developing XI scenarios which include RFC receiver chhanel (in IB: Integration Directory), to call a function moule in a R/3,
which kind of user should i use for this purpose, i mean to say,
which user type:
SYSTEM
Dialog
Communication
System
Reference
and what should be the roles of that user,
which type of the user doesnt gets locked, on wrong attempts
Hi,
Generally S_RFC and S_SERVICE authorizations are nedded while calling RFC module from R3. Also check for role S_RFC_ADM
The backend should have the authorization to execute the RFC on the backend.
You can test the module in R3 and create a role using PFCG assign the tcode - SU53 (authorization check) and also assign the S_RFC and S_SERVICE to role.
Refer
RFC Logon user authorizations
Question on service userid - for RFC call
End User Authorizations and Roles
Calling R3 RFC via http
For RFC different authorization object is requried. You can ask your basis team to add the relevant authorization object in a new role and then add the new role to any existing service user or better create a new system user and add the role.
Thanks
swarup
Similar Messages
-
Recommendations on maximum connections for RFC receiver channel
In the past I have bumped this up to 10 or 15 but never really understood the significance or impact this can have. How do we size this number? Any idea?
We may need to supply bunch of information to Basis on this before we resize it. Right now I get this for a certain interface which has huge volume.
Exception caught by adapter framework: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: resource error: could not get a client from JCO.Pool: com.sap.mw.jco.JCO$Exception: (106) JCO_ERROR_RESOURCE: Connection pool RfcClient[CC_Upd_Invoice_RFC_Recv]96d0f28e47aa3214a8d893b51d627ca6 is exhausted. The current pool size limit (max connections) is 1 connections.
Thanks,
PamHi Pam,
Please refer to SAP note 730870 at service.sap.com. There is a lot of good recommendation from SAP here in regards to RFC adapter configuration for PI/XI 7.0 and 7.1.
thanks.
Jamie -
Error with RFC receiver channel
Hi,
Getting this below error for receiver RFC channel. Can anyone please look into this error urgently.
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.lang.NullPointerException: while trying to invoke the method com.sap.aii.adapter.rfc.core.config.RfcConfig.getChannel() of a null object returned from com.sap.aii.adapter.rfc.core.client.RfcClientPool.getConfig()Hi,
Restarted but no result. Getting another error :
Delivering the message to the application using connection RFC_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling Z_SD_XI_BAPI_CREATE_VA_SLSORD3 in remote system (RfcClient[CC_RFC_Z_BRONZE_VA_RCVR]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Could not open file /usr/sap/XP3/interfaces/va/br_vaout_20140401_04204.
I do not understand why RFC receiver channel is giving this error.
Can any one please look into it on priority.I need it to get resolved very soon.
Thanks -
User dynamic for RFC communication channel
Hello,
we are developing an architecture for a bank company. We have a JAVA frontend and a R/3 backend, with a XI machine between both. All the authorizations are implemented inside the R/3 backend, and we need that all the users of the frontend exist on the backend. For this reason, when we define the RFC communication channel inside the integration builder configuration, the user must be dynamic. However, on the RFC communication channel only an static user-password is permitted. Could you tell us a possible way to define this user dynamically?Hello,
SSO - Single Sign On is not supported in XI3.0, communication channels need a service id for talking with R3.
We have been following up with SAP for SSO functionality. Its still in the pipeline. In the near future they may provide SSO.
Regards,
Naveen -
Which EAP Type to choose for 802.1x Wireless Policy?
Hi everyone,
i have a question about recommendation for EAP Type in a wireless policy:
Which configuration is more secure/recommendet?
a)
Authentication Type: PEAP
EAP Type: EAP-MSCHAP v2
b)
Authentication Type: EAP
EAP Type: Certificate
We have a working configuration with a) and could Change to b).
Thanks,
AndyHi,
Project a uses PEAP cooperate with EAP(EAP-MSCHAP v2) is more security/recommended.
PEAP is a new member of the family of EAP protocols. To enhance both the EAP protocols and network security, PEAP provides:
1. Protection for the EAP method negotiation that occurs between client and server through a TLS channel. This helps prevent an attacker from injecting packets between the client and the network access server (NAS) to cause the negotiation of a less secure
EAP method. The encrypted TLS channel also helps prevent denial of service attacks against the IAS server.
2. Support for the fragmentation and reassembly of messages, allowing the use of EAP types that do not provide this.
3. Wireless clients with the ability to authenticate the IAS or RADIUS server. Because the server also authenticates the client, mutual authentication occurs.
4. Protection against the deployment of an unauthorized wireless access point (WAP) when the EAP client authenticates the certificate provided by the IAS server. In addition, the TLS master secret created by the PEAP authenticator and client is not shared
with the access point. Because of this, the access point cannot decrypt the messages protected by PEAP.
5. PEAP fast reconnect, which reduces the delay in time between an authentication request by a client and the response by the IAS or RADIUS server, and allows wireless clients to move between access points without repeated requests for authentication.
This reduces resource requirements for both client and server.
You can choose between two EAP types for use with PEAP: EAP-MS-CHAPv2 or EAP-TLS. EAP-MS-CHAPv2 uses credentials (user name and password) for user authentication. EAP-TLS uses either certificates installed in the client computer certificate store or a smart
card for user and client computer authentication. Comparatively, the second one is more security because public Key certificates provide a much stronger authentication method than those that use password-based credentials.
Best Regards,
Eve Wang -
Alert Management for RFC Communication Channel
Hi All,
I want to send notification to user using Alert Management in case of System Error in RFC Adapter.
I tried with defining rule in RWB with * . But still I am not able to find notification in Inbox or Mail Inbox.
Thanks.Infact it is working fine for JDBC CC.
But in case of RFC Receiver CC it is niether apperas in Alert Inbox nor in Mail Inbox.
Then there needs no more setting to be done. Are you sure that an error has been reported by the RFC channel (red symbol) and there is no restriction in Alert Configuration....like the interface name/ adapter type etc.
Uncheck the option Suppress Multiple Alerts of this Rule option -
"Unauthorized" error for SOAP receiver channel
Hi all,
I have a scenario in which I am calling a .NET web service from a UDF in which the XML payload is constructed manually. I have configured a SOAP receiver channel. Also, since the web service needs certificate authentication, I have checked the corresponding parameter in the SOAP channel and selected appropriate client certificate.
When I execute the mapping, I get the following error -
com.sap.aii.mapping.lookup.LookupException: Exception during processing the payload.Problem when calling an adapter by using communication channel SOAP_RCV_IMWS_Change (Party: , Service: IMWS, Object ID: dda07d364ca73d4ab9e89e562a971b36) XI AF API call failed. Module exception: 'com.sap.aii.af.ra.ms.api.RecoverableException: invalid content type for SOAP: TEXT/HTML; HTTP 401 Unauthorized: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 401 Unauthorized'. Cause Exception: 'invalid content type for SOAP: TEXT/HTML; HTTP 401 Unauthorized'.
Is this related to error in certificate authentication process, OR wrongly formed XML payload OR anything else ?
Regards,
ShankarNo. I didn't provide any login info. The web service doesn't specify username login requirement. Instead, it needs client certificate for authentication, which I provided in SOAP receiver channel.
I am testing the web service by executing the message mapping. The web service was executed successfully from its 'Test Page' like for SAP web services we have web service navigator. So it runs ok from that test page, but gives error when called from UDF.
Regards,
Shankar -
RFC receiver channel, message not reflecting in Receiver ECC system
Hi All,
We are using Receiver RFC adapter to call a custom RFC (ASynchronous call). It was working fine, But now after we made a few changes in the mapping. The message is successful in PI, but it is not visible in ECC. When I check in RWB, I think the payload is not going correctly to ECC. I have re-imported the RFC and tried as well. It still does not work.
Kindlhy let me know what to do.
Rgds,
MithunHi Rajhan,
My abaper is doing that, By that time, i just saw the payload in the message display tool(MDT) in RWB...
it looks like some junk data
"QT00010101000120120119201201202012012020121231USD38130511T-F399000110000010001585030512T-F299000110000010001210SP0000001002"
where as in sxmb_moni of PI system the payload after mapping is
"<?xml version="1.0" encoding="UTF-8" ?>
- <ns1:BAPI_QUOTATION_CREATEFROMDATA2 xmlns:ns1="urn:sap-com:document:sap:rfc:functions">
- <QUOTATION_HEADER_IN>
<DOC_TYPE>QT</DOC_TYPE>
<SALES_ORG>0001</SALES_ORG>
<DISTR_CHAN>01</DISTR_CHAN>
<DIVISION>01</DIVISION>
<PMNTTRMS>0001</PMNTTRMS>
<QT_VALID_F>20120119</QT_VALID_F>
<QT_VALID_T>20120120</QT_VALID_T>
<CT_VALID_F>20120120</CT_VALID_F>
<CT_VALID_T>20121231</CT_VALID_T>
<CURRENCY>USD</CURRENCY>
</QUOTATION_HEADER_IN>
<SALESDOCUMENTIN>381</SALESDOCUMENTIN>
- <QUOTATION_ITEMS_IN>
- <item>
<ITM_NUMBER>30511</ITM_NUMBER>
<MATERIAL>T-F399</MATERIAL>
<PLANT>0001</PLANT>
<TARGET_QTY>100</TARGET_QTY>
<SHORT_TEXT />
<MATL_GROUP />
<CUST_GROUP />
<PMNTTRMS>0001</PMNTTRMS>
<PRICE_DATE />
<SHIP_POINT>0001</SHIP_POINT>
<TARGET_VAL>5850</TARGET_VAL>
</item>
- <item>
<ITM_NUMBER>30512</ITM_NUMBER>
<MATERIAL>T-F299</MATERIAL>
<PLANT>0001</PLANT>
<TARGET_QTY>100</TARGET_QTY>
<SHORT_TEXT />
<MATL_GROUP />
<CUST_GROUP />
<PMNTTRMS>0001</PMNTTRMS>
<PRICE_DATE />
<SHIP_POINT>0001</SHIP_POINT>
<TARGET_VAL>210</TARGET_VAL>
</item>
</QUOTATION_ITEMS_IN>
- <QUOTATION_PARTNERS>
- <item>
<PARTN_ROLE>SP</PARTN_ROLE>
<PARTN_NUMB>0000001002</PARTN_NUMB>
<NAME />
<REGION />
</item>
</QUOTATION_PARTNERS>
</ns1:BAPI_QUOTATION_CREATEFROMDATA2>"
ANY SUGGESTIONS... This is PI 7.1 so its auto commit for the RFC receiver adapter rite. should i tick some option or what else can we do
Rgds,
Mithun -
Changing HTTP-Parameters for HTTP Receiver Channel
Dear all,
we have a partner we send files to using the simple HTTP adapter.
We have different types of messages (interfaces) we send to the partner.
Our partner expects the message type as a parameter of the URL. Such as http://xxx:000/xxx?msgtype=outbound
In turn, the "outbound" could also be "inbound" - depending on the message type.
I want to avoid using to services with two adapters.
Thus, my question to you: Do you have an idea how I could manipulate the parameter's value?
Thanks in advance,
HelgeHi Helge,
if you have Sp14 and above you can try setting the url
dynamically in the mapping using Adapter-Specific Message Attributes in the http receiver channel:
http://help.sap.com/saphelp_nw04/helpdata/en/43/64dbb0af9f30b4e10000000a11466f/content.htm
this way it should be no problem to change it
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI FAQ - Frequently Asked Questions</a> -
Need Help regarding which Material Type to use for the Scenario
Hi,
Here we are configuring the service scenario.
Suppose Electric Switch of customer flat is not working.
Here in this case I will purchase the switch. And along with service order
I will do the delivery of the Material. Then will raise the Invoice to the customer
with service charge as well as material cost.
Here I will have to run the MRP also for that material to raise the PR if stock goes below
the reorder point.
So I will have to maintain the Purchase view, Sales View & MRP view to that Material.
So in this case which standard material Type can I use for this material? Or I have to create
our own material Type for this material.
Regards,
PradipROH is usually a material type that is supposed to be consumed in production.
HALB is a semifinished good, own produced and meant to consumed in production.
Both are usually not forseen to be sold.
A material that you buy yourself and sell to a customer is a trading good, which is HAWA in SAP. -
Which paramter configures the timeout for rfc call (to R/3 ) from BPM
hi froum,
i have a scenario, with BPM, in which theres a synchronous send to a rcf Function Module in R/3,
now, can u tell me which paramter decides the time out for this Sync call to rfc enabled Function Module in R/3,
i mean which paramater in SXMB_ADM or anywhere else that dictates the time periodCheck this out, RFC adapter section
/people/michal.krawczyk2/blog/2006/06/08/xi-timeouts-timeouts-timeouts
Regards,
Prateek -
Which service type to use for Proxy Service
I have a question regarding a Proxy service.
I have a need for a local (transport local) Proxy service which is called by another proxy service.
It is a synchronous service which has an XML incoming message and an XML outgoing message.
I have the following questions:
- Does it make a difference in performance when I choose a WSDL webservice or a Messaging service?
- Which one would you choose and why?
ThanxDoes it make a difference in performance when I choose a WSDL webservice or a Messaging service?Hardly there would be any difference.
Which one would you choose and why?I would choose XML type messaging type proxy because input and output are XML messages. I won't choose WSDL web-service because it should be used in case of SOAP packagaing only (in web-service context, to enable SOAP and WS support) to mock a web-service which has a WSDL (and a XSD) associated with it.
Regards,
Anuj -
Which mov type is used for transfer?
Hi,
Which move ment type is used to transfer vendor consignment stock to unrestricted stock, is this 403?
Thanks,
AdityaHi Aditya,
To transfer the material from vendor consignment to unrestricted stock you must use movement type :411 bwith special stock indicator K.
Regards,
Tushar Patankar -
Which file type to use for editing
I recently filmed a school talent show to create DVDs for the parents. I'll be using PrE 9 to edit. I understand the output for the movie will need to be MPEG2 for the DVD. We used three different cameras (I know this is a bad thing to do with PrE), but we used what we have available. Though, we did use a GoPro Hero2 mounted on the piano to give a unique perspective. Consequently I need to convert the video files into a common format for editing. Is there a "best" file format to edit in or is there a file format that is easiest to work with in Premiere Elements while maintaining the best quality for the DVD output?
Here is what we used:
Camera 1 (with the audio track from the sound board) was a Canon Vixia HF300. It exported in the dreaded .mts format (half the show at 24mbps and half at 17mbps)
Camera 2 was a Nikon 5100 as .mov files, 1920x1080, H.264, Linear PCM, Total bit rate 19k
Camera 3 was a GoPro Hero 2 recorded .mp4 1280x780 H.264 Total bit Rate 15k
Since the aspect ratios are not equivalent, I plan on using black bars as opposed to cropping.
I'm editting on an Apple MacBookPro 2.66GHz Intel Core 2 Duo with 8gb RAM running OSX 10.7
Also, should I use Quicktime to convert these files into the common format I choose? Ironically, all this footage is editable in iMovie, but iMovie is horrible for multi-camera.
Thanks,
EdOver on the Windows side of the aisle where I am, I would say convert all to DV AVI since the end will be a DVD, not a BluRay
For Mac, I guess the SD version of DV AVI in the MOV wrapper
I have some saved discussions & links, but have NO idea if any of these places have Mac versions
Tools to Convert to DV-AVI http://forums.adobe.com/thread/415317
Convert http://premierepro.wikia.com/wiki/FAQ:How_do_I_convert_my_files%3F
Convert your HD files to DV-AVI Type II with 48KHz 16-bit Audio
As well as the links just above, use Google to find conversion software
I have NOT used the products below, I only forward due to other mentions... so YMMV and all the usual disclaimers... check the links and read to find out if one of the products listed below will rip or convert the files you have to something you need for editing
http://www.corel.com/servlet/Satellite/us/en/Product/1175714228541#tabview=tab0
http://www.womble.com/products/mvw.html
http://www.magix.com/us/movie-edit-pro/ plus $5 Ship
http://www.nchsoftware.com/prism/index.html
http://www.videoredo.com/en/index.htm
http://www.nchsoftware.com/prism/index.html Converter
http://www.daniusoft.com/media-converter-ultimate.html
http://www.deskshare.com/dmc.aspx Digital Media Converter
http://www.any-dvd-ripper.com/any-dvd-ripper-windows.html
http://www.deskshare.com/dvd-ripping-software.aspx
http://www.dvdcopysoftware-reviews.com/dvd-cloner/
http://www.topsoftwareol.com/product/Video/Video_Converter_Standard.html
http://www.erightsoft.com/SUPER.html Multi-Converter <-- supposed to be very good
http://download.cnet.com/FreeStar-Free-Video-Converter/3000-2194_4-10854990.html
http://www.dvddecrypter.org.uk/ or http://www.mrbass.org/dvdrip/
http://www.flaskmpeg.net/download.php Mpeg to AVI Converter
http://www.squared5.com/ MPEG Streamclip Converter
http://www.virtualdub.org/ Mpeg to AVI Converter
http://www.sothinkmedia.com/video-converter/
http://www.videohelp.com/tools/XviD4PSP -
Hi Experts!
In my scenarios i am using Receiver RFC for Look up. The RFC Channel is working fine in Dev server after we transport it to the QA. Now we are getting an error message :GenericRFCChannel" is not found in SXMB_moni.
ID we have made the new configurations. When i have tested in IE the RFC is working fine. so we getting a strange why it is not working while runtime.
Also i am having one doubt, Is it is mandatory to give the SAP BI details in the Software Component in the IE.Here our RFC are in SAP BI system.
Pls give me some ideas to debug this issue. Thanks in Advance.
Regard's
Preethi.Hai !
I have made a dummy changes nad reactive the channel even now i am getting the error as
Give me some input to debug this issue. Pls.
<Trace level="1" type="B">CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV</Trace>
<Trace level="1" type="T">Mapping-Object-Id:995C3CC70F88314694147FC81DEB10D0 </Trace>
<Trace level="1" type="T">Mapping-SWCV:E179B290F08511DFAAACDF94C0A80049 </Trace>
<Trace level="1" type="T">Mapping-Step:1 </Trace>
<Trace level="1" type="T">Mapping-Type:JAVA_JDK </Trace>
<Trace level="1" type="T">Mapping-Program:com/sap/xi/tf/_dealTicket_OPS_iOam_MM2_ </Trace>
<Trace level="1" type="T">RuntimeException during appliction Java mapping com/sap/xi/tf/_dealTicket_OPS_iOam_MM2_
Thrown:
com.sap.aii.utilxi.misc.api.BaseRuntimeException: com.sap.aii.mapping.api.UndefinedParameterException: The input-parameter GeneratedReceiverChannel_RFC does not exist.at com.sap.aii.mappingtool.tf7.Transformer.start(Transformer.java:148)
at com.sap.aii.mappingtool.tf7.AMappingProgram.transform(AMappingProgram.java:626)
at com.sap.aii.ib.server.mapping.execution.JavaMapping.executeStep(JavaMapping.java:92)
at com.sap.aii.ib.server.mapping.execution.Mapping.execute(Mapping.java:60)
at com.sap.aii.ib.server.mapping.execution.MappingHandler.map(MappingHandler.java:87)
at com.sap.aii.ib.server.mapping.execution.MappingHandler.map(MappingHandler.java:71)
at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:119)
at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:72)
at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79)
at sun.reflect.GeneratedMethodAccessor555_10000.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal(RequestInvocationContext.java:43)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:166)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatesTransition.invoke(Interceptors_StatesTransition.java:19)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Resource.invoke(Interceptors_Resource.java:71)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.doWorkWithAttribute(Interceptors_Transaction.java:38)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.invoke(Interceptors_Transaction.java:22)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:189)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatelessInstanceGetter.invoke(Interceptors_StatelessInstanceGetter.java:16)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_SecurityCheck.invoke(Interceptors_SecurityCheck.java:21)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_ExceptionTracer.invoke(Interceptors_ExceptionTracer.java:16)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at com.sap.engine.services.ejb3.runtime.impl.DefaultInvocationChainsManager.startChain(DefaultInvocationChainsManager.java:133)
at com.sap.engine.services.ejb3.runtime.impl.DefaultEJBProxyInvocationHandler.invoke(DefaultEJBProxyInvocationHandler.java:164)
at $Proxy587_10000.processFunction(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:183)
at com.sap.engine.services.rfcengine.RFCJCOServer$J2EEApplicationRunnable.run(RFCJCOServer.java:269)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:152)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:247)
Caused by: com.sap.aii.mapping.api.UndefinedParameterException: The input-parameter GeneratedReceiverChannel_RFC does not exist.
at com.sap.aii.ib.server.mapping.execution.MappingParametrization$InputParametersImpl.getValue(MappingParametrization.java:84)
at com.sap.aii.ib.server.mapping.execution.MappingParametrization$InputParametersImpl.getValue(MappingParametrization.java:71)
at com.sap.xi.tf._dealTicket_OPS_iOam_MM2_.__CreateStructures(_dealTicket_OPS_iOam_MM2_.java:276)
at com.sap.aii.mappingtool.tf7.AMappingProgram.preStart(AMappingProgram.java:307)
at com.sap.xi.tf._dealTicket_OPS_iOam_MM2_.preStart(_dealTicket_OPS_iOam_MM2_.java:802)
at com.sap.aii.mappingtool.tf7.AMappingProgram.start(AMappingProgram.java:489)
at com.sap.aii.mappingtool.tf7.Transformer.start(Transformer.java:133)
... 40 more
Maybe you are looking for
-
How do I stop my iTunes from skipping?
My iTunes skips on my PC and from my iPhone 5. It doesnt matter if its with mucis taken from a CD or digital mus
-
Ordered the Airport Extreme Base Station - some questions if you can help?
I have a Windows 7 Home Premium 64 bit IBM ThinkPad T500 laptop I need to connect, and a Windows Vista PC. The ThinkPad has a built-in wirless N card and the Vista has a Belkin N+ USB wireless adapter. Can these both find and connect to the Airport w
-
New itunes install error - Installation package could not be opened. Verify
I Just bought a brand new computer last night. I am trying to install Itunes and get the following error. "This installation package could not be opened. Verify that the package exists ad that you can access it, or contacnt the applicaiton vendor to
-
How to create 2 tables data in smartforms
Hi I am new to smartform. I have minimum knowledge in smartform. here I have 2 tables. I want to display 2 tables data. How to create a smartform using these two tables? I know create a smart form using one table. Please tell me Thanks
-
Lync 2013 Frequent Contacts not showing in Outlook 2010 on RDS
Running Outlook 2010 along with Lync 2013. On a Windows 7 PC if I launch Outlook first, then launch Lync. The frequent contacts will appear on the To-Do bar after "refreshing outlook" (minimizing and maximizing or changing folders. If I do the same t