Which versions of Illiustrator are compatible with InDesign CS 5.5?

which versions of Illiustrator are compatible with InDesign CS 5.5?

Thank you for your reply Peter. I have InDesign CS 5.5 and need to use Illustrator with it to update the data in graphs. I know CS5.1 works, and am wondering if earlier versions (back to CS or Illustrator 10) would work as well to edit and re-save my graphs for use in the InDesign document. Ultimately I need to incorporate the updated graphs in my document using InDesign 5.5, so that’s the compatibility I want to understand.

Similar Messages

Which Versions of SQL are compatible with windows 2003 server?

I just purchased SQL 2014 standard and tried to install on my Windows 2003 standard R2 VM server. It will not install and now I'm finding some places on the internet that say it's not compatible????
Is this true?
And if so what version of SQL can I install on my windows 2003 standard R2 VM server???

Hello,
You can install SQL Server 2008 R2 or earlier versions of SQL Server only on a Windows Server 2003 R2 computer.
SQL Server 2008 and SQL Server 2008 R2 can be installed on Windows Server 2003 R2 if you apply SP2 for Windows Server 2003 R2.
Meanwhile SQL Server 2005 requires Windows Server 2003 R2 Service Pack 1.
SQL Server 2000 can be installed on Windows Server 2003 R2 with no service pack.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Which video crd's are compatible with the H8-1414

Does anyone know Which video crd's are compatible with the H8-1414

Hi,
The H8-1414 has the AMD 7450 video card which is a good video card for an UEFI enabled PC with a 300 watt power supply.
A higher performing video card that will run in UEFI mode would require a bigger power supply and then there would be numerous cards depending on your application requirements.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Which flash media players are compatible with AS3?

Can anyone tell me which flash media players are compatible with Actionscript 3?
Can anyone advise me which ie platform AS3 is compatible with as well?
We have many conflicts of interest at work.
thanks

9 and 10

HT204368 which blue tooth headphones are compatible with the ipod touch?

Which blue tooth headphones are compatible with the IPod Touch(not the phone)

All which support the Bluetooth profiles
http://support.apple.com/kb/HT3647

Which version of photoshop is compatible with my Mac OS X v.10.6.8? Should I use Photoshop CS4 Extended or CS5 Extended?

Which version of photoshop is compatible with my Mac OS X v.10.6.8? Should I use Photoshop CS4 Extended or CS5 Extended?

CS5 works fully on my Macbook Pro, but it all depends on your specs. If you have a newer MBP on SL, you should be fine. Photoshop isn't terribly demanding on the computer so I wouldn't worry too much about it. Whichever one you can get is fine.

Which mSATA SSD's are compatible with IdeaCentre A730

Want to install mSATA SSD as primary drive in my IdeaCentre A730 AiO.
I wonder which mSATA drives are compatible with my AiO.
I read som issues with Samsungs 840 EVO mSATA SSD.
Who can help?

hi Polleke1952,
Thanks for Posting!
The only issue I have looked at with the Samsungs 840 EVO mSATA SSD. is Hardware not show on Device Manager, I would say that this is not a Hardware specific Issue but More of a Windows concern.
Where an MS Hotfix would resolve.
For a straight forward Answer
The Samsungs 840 EVO mSATA SSD or Any other Msata SSD will work on the system.
Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Which video graphics controllers are compatible with HP Pavilion g62-219wm Notebook PC?

Which video graphics controllers/cards are compatible with my system? Here is my system setup: Product Number WQ760UA#ABAMicroprocessor Core 2 Duo T8300 2.4Ghz Microprocessor Cache 3MB L2 Cache Memory 4GB DDR3 System Memory (2 DIMM) Memory Max 8GB Video Graphics Intel gma 4500 Graphics Video Memory up to 1306 MB total available graphics memory Hard Drive 320GB (5400RPM) Multimedia Drive LightScribe SuperMulti 8X DVD±R/RW with Double Layer Support Display 15.6" diagonal High-Definition HP BrightView LED Display (1366 x 768) Thank you very much for your time!

Hi, Unfortunately it's not possible to change the graphics unit on your notebook. Your existing Intel graphics chip is soldered to the system board and is not an upgradeable component, nor is there a port to add a discrete gpu. Regards, DP-K

Which older versions of photoshop are compatible with macbook pro 10.7.5 OS X

hi! can i use photoshop cs3 or cs4 on my macbook pro 10.7.5 OS X?

i need to be completely sure, i don't have money to throw away. i've been using cs3 for years on a mac mini.
i really need to know which version is best and yet the oldest and least expensive i could get away with. thank you whomever knows.

Which solid state drives are compatible with iMac 7 27 inch late 2009?

I am interested in installing an SSD (120 to 250gb) for the start up drive and run the system and apps that are disk drive intensive like databases. My goal is to speed up my iMac 7, and of course, minimum investment necessary.
I searched online and find lots of material at OWC, Crucial and iFix it but have found conflicting opinions and even success in the upgrade. So my questions are:
1) Can an SSD be installed in my iMac? iMac 7 late 2009, 2.8Ghz 27", model 11,1, 16GB RAM
    a) as an internal hard drive in addition to the factory installed?
    b) as an internal hard drive in replacement of the factory installed?
    c) as an external USB drive?
2) What type of SSDs are compatible?
3) Assuming that 1 and 2 are positive, what are the most critical things that I should keep in mind when transferring OS X and the boot drive location from the current drive to the SSD?
Any guidance, no matter how partial is greatly appreciated.
Thank you.

I put an OWC SSD drive in my late 2009 21.5" iMac. Note that your model computer has a link speed limit to 3G, so putting a 6 G will not give you more than 3G link speed. Furthermore, putting a 6G SSD in this model might also throttle down the actual speed to 1.5G. Not sure about other model drives, but that is noted in the fine print at OWC. Read the compatibility issues for your model computer, especially about the link speed issue
There is also the issue of the temp sensor which is located internally on the hard drive for this model and later. So you will have to make special adaptations to install any drive other than direct same type compatilbe replacements in the main bay. OWC also sells an adapter sensor cable for this, but I think it cost around $45.
One thing that drove me to OWC was the fact that they do not recommend using TRIM with their drives. That is a debatable issue about using TRIM with other drives, so if you go with another brand, you might want to research that topic before choosing another brand other than OWC. Many have stated no problem without using TRIM enabler software using some of the other brands like Samsung SSD drives.
What I did is left the internal drive in the main drive bay and installed an OWC SSD in the optical bay using the data doubler adapter. This has worked out great for me and I use the main drive as a backup drive. There are several sizes available in the 3G model. I chose the 240gig.
The whole kit with the data doubler is in the link here:
http://eshop.macsales.com/item/OWC/DDIMSSD240/
Not saying you will get blazing performance with this like 6G compatible speeds would give, but as I said, your computer hardware is limited. But your sustained Read/Write speeds will basically double, and the Random Read/Write will go up tremendously.
You will definitely be pleased with the performance increase.
Once I installed the drive, I just used Disk Utility to format the SSD drive and then restored the whole internal drive to the SSD drive. Everything copied including the recovery partition to the new drive. Once the restore was done, just changed startup disk and booted into the SSD. Was very simple.

Which c-series modules are compatible with Scan Mode?

OK, so I just wasted 4 hours.
I started a new Project with a need to use a 9220 analogue input card on a cRIO 9030, but immediately became stuck when I was unable to add the module using the right click Add New C-Series Module wizard to the 9030 chassis.
My first (and only) assumption was that this was a new card and I needed the latest Device Drivers. So I installed those.
When that failed I upgraded my LV2014 to LV2014 SP1, and also upgraded the Real-Time and FPGA modules too.
4 hours later, when that failed, I realised that maybe this isn't a card compatible with Scan Mode so began searching ni.com for information. I've searched a whole raft of terms and I just cannot find information on which modules are supported by Scan Mode (which is presumably nearly all of them). I know it exists somewhere because I one referred to it when I had an RS485 module that was only compatible in FPGA mode, about four years ago.
So:
1. Is there an easy way to determine if a C-Series module is compatible with Scan Mode? I still don't know!
2. Can we please have Scan Mode compatibility shown in the Add C-Seris Module Wizard. When attempting to add a module to a cRIO chassis, the wizard can hint to us that a particular module is not compatible. By not showing the 9220 in the drop down list I was led to believe the module was not a known device (and hence I attempted to upgrade my drivers). It would be better if the module was listed but disabled and not selectable, with some informational text to explain why. It's a fair assumption that a module will be compatible, so we don't expect it to not be listed when we attempt to add it. In fact, the possibility that some modules aren't compatible can evade your consciousness temporarily and make you do stupid things (like upgrade your installation!).
3. Can we please have Scan Mode compatability information put on each module's description page. That would have made this whole process much quicker.
Thoric (CLA, CLED, CTD and LabVIEW Champion)

Well, I definitely agree that finding info about RSI module support is not as easy as it should be. Since I know where to look, I will refer you to this document, which I found linked from this page.
That's the best document I know of on the topic.
Cheers!
TJ G

What versions of Java are compatible with version 17 ESR

Trying to identify which version of Java can be used with Firefox 17.0.4. Thanks

Update to FIrefox ESR 17.0.7
Please check if all your plugins are up-to-date. To do this, go to the [http://mozilla.com/plugincheck Mozilla Plugin Check site].
Once you're there, the site will check if all your plugins have the latest versions.
If you see plugins in the list that have a yellow ''Update'' button or a red ''Update now'' button, please update these immediately.
To do so, please click each red or yellow button. Then you should see a site that allows you to download the latest version. Double-click the downloaded file to start the installation and follow the steps mentioned in the installation procedure.

Where can I find what versions of software are compatible with Yosemite? ie. Logic Express, Microsoft Office, iTunes etc

Hi,
I'm thinking of getting a new iMac, however I am concerned some current software will not be compatible with it and I'll lose files etc. For example all my music files for Logic Express 8.
I am currently running:
Mac OS X version 10.6.8,
iTunes 11.4,
iPhoto 7.1.5,
Logic Express 8.0.2,
Microsoft Word/Excel etc. is 12.3.6.
These are the most used applications so I want to limit any losses from these if I were to get a new iMac.
Any support with this, and on how to transfer files to a new iMac would be very much appreciated.
Thank you.

Compatibility Table.

How can I check whether new versions of Firefox are compatible with my add-ons? I specifically need to know this regarding Zotero as I would very much hate to loose my reference data base when changing from one version of Firefox to the next ...

Is there an add-on that can help me with this? Or do I just install the new version and hope for the best?

Firefox 9.0.1 is a real old version and is no longer supported - Firefox 24.0 is the current release version.
Open the Add-0ns manager tab and click on '''More''' for each extension that you have installed. Near the bottom of each "More" there should be a link that will take you to the download page where you can verify compatibility.
Or use this extension - https://addons.mozilla.org/en-US/firefox/addon/is-it-compatible/ - but I'm not sure how well it will work when you are so many versions 'behind the curve'.

Which Keynote fonts & transitions are compatible with Powerpoint?

Hi,
I've used some jazzy transitions in my Keynote and will export to Powerpoint and play it from a PC. Now I'm told that there might be compatibility issues with the transitions. Can anyone tell me what are the safe transitions I can use in Keynote that Powerpoint will play without hiccups? Similarly, I've used some fonts like Catull and Headline. Will these be a problem in Powerpoint or does it just read off the pixels, not the font?
Thanks.

You will have font problems unless you can install your fonts on the pc. There aren't many compatible transitions, even dissolve may turn into the ugly blocky transition if you have Powerpoint 2003. Pushing a slide to the side may translate. It's just not a good idea to create a fancy presentation in Keynote when you know you are going to have to convert it to PC Powerpoint. You will always create more work for yourself. You can do initial layout in Keynote but any animating, special fonts, etc. you should do in the platform you will use in the end.

Which versions of Illiustrator are compatible with InDesign CS 5.5?

Similar Messages

Maybe you are looking for