While activating a request in DSO getting error code 10
While activating a request in DSO getting error code 10
Hi All,
I am trying to load data into Billing: Condition Data (0SD_O06) using 2LIS_13_VDKON. First while loading data I am getting error
Record 8778 :InfoObject SOLD_TO does not contain alpa-conforming value 100000 which I changed manually in PSA maintenence and tried to load data again and now I am getting an error (Error 10 in the update) ID:RSAR No119.
I have checked the formula in Transformation and it works fine. Still I am not able to load data.
Please help.
Thanks and regards
Vishal Pardeshi
Check the log for the request from the manage screen of the DSO, it will be there next to the monitor button.
Otherwise you can check the error from the monitor screen of the request in Details tab.
Veerendra.
Similar Messages
-
Error while activating the request of DSO upload
Hi all,
While activating the request generated during upload to Datastore object,it ends in an erroneous activation giving the following error.
'No SID found for value 'BBL' of characteristic 0BASE_UOM'.
Is it because no translation exists,if so what should be done for the same.
Thanks in advance,
Chintu.hi Chintu,
it seems unit BBL not exist in your bw system,
you can update the unit master from r/3,
have you performed 'transfer global setting' ?
check in r/3 table t006a (t006*), if exist you can
rsa1->source system->right click r/3 source system
'transfer global setting', in next screen mark 'unit of measurement' (also currency etc) and option 'update table'.
this update should be scheduled periodic, menu program->run in background and schedule periodic job.
if BBL not exist in r/3, you can manualy maintain,
transaction CUNI.
hope this helps. -
While activating Transformation 0PS_C041 - 0CO_OM_WBS_2 am getting error
Dear all
While activating the Transformation 0PS_C041 - 0CO_OM_WBS_2 am getting the following error
Error when writing routines
Message no. RSAA561
Error while activating transformation
Message no. RSTRAN510
Error when activating Transformation 0N7SM4TBBDTRG1KKDKS3QRMWAHMV490Q
Message no. RSO404
plz guide me seniors
Regards,
SunderHi,
Make sure your routines are syntatically correct in the transformation before activation.
still it is giving the same error please elaborate the issue and post it over here.
Thanks
Suresh -
Error while activating the datasource [UD Connect]. getting error as '&'
Hi Friends,
I am trying to get the data from a SQL source through UD connect.
I do the proposal and map all the info objects to the respective columns.
When i acticate the data source i am getting the error as
'&' and Error while Error when activating DataSource 'ZEFF_ENTRY UD_ECUBE'
Please do tell why such errors occur and also the solution to handle such errors.
Thanks in advance.
VeenaHi,
where you are getting error in ECC?. or in BW?. If it is already in use, then you need to clear all Queues and then try to activate it.
Thanks
Reddy -
Error while activating the request in DSO
Hi all,
I had loaded the data into the DSO from another DSO.
The load is compeleted successfully and the data came to the new data table, but when i activate the request it turns to red, giving some error that sid has changed. what may b the reason for this
ThanxHi,
check threads
ODS Object Activation SID changed
Error in assigning SID and activation of ODS
Maybe this helps.
Regards,
Arek -
help me
Hello Apple3041
That error usually relates to security software blocking access to the iTunes servers. Check out the articles below for more info and what to do to resolve the issue.
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694
Resolve issues between iTunes and security software
http://support.apple.com/kb/TS3125
Regards,
-Norm G. -
Error occurs while activating a 'Write Optimized' DSO.
I am getting error " There is no PSA for infosource 'XXXX' and source system 'XXX' while activating a newly defined DSO object.
I am able to activate a Standard DSOs, however the error occurs while activating a 'Write Optimized' DSOHi,
For write optimised DSO, check if you have tick the uniqueness of the records. If you check that and if there are two same records coming from source in one go, then you will get error
From SAP help
You can specify that you do not want to run a check to ensure that the data is unique. If you do not check the uniqueness of the data, the DataStore object table may contain several records with the same key. If you do not set this indicator, and you do check the uniqueness of the data, the system generates a unique index in the semantic key of the InfoObject. This index has the technical name "KEY". Since write-optimized DataStore objects do not have a change log, the system does not create delta (in the sense of a before image and an after image). When you update data into the connected InfoProviders, the system only updates the requests that have not yet been posted.
Thanks
Srikanth -
What does this error mean?! " your request cannot be processed, error code 1009".
Read through this article for iTunes Store troubleshooting:
http://support.apple.com/kb/TS3297 -
BI7.0 Hexdecimal values problem while activating the data in DSO
Hi Friends,
I've got the data upto PSA and i've run DTP also from PSA to DSO, but while activating the data in DSO from New Data Table to Active Data Table, it's giving the error given below:
Error when assigning SID: Action VAL_SID_CONVERT table
0DOC_HD_TXT
Value '1st disb' (hex. '00310073007400200064006900730062') of characteristic 0DOC_HD_TXT contains invalid characters
Process 000037 returned with errors.
it isn't accepting the values like with numberels and chars together
ex: 1st disb, 70 cr Gen Hsg.
I want the same to be in the report, how these are to be allowed?, i don't want to edit in PSA and there are a lot of values like that i can't edit all those, since there are thousands of records.
Regards,
BalajiReddyHi Anil,
Thanx for your quick replay, i've allowed ',' in RSKC and i've checked the check box LOWER CASE LETTERS for IO 0DOC_HD_TXT, the problem was almost solved out. What does ',' mean by?
Why lower case letter has to be checked only for this IO (0DOC_HD_TXT), not for others? if it is checked, it allows only lower cases, doesn't allow upper cases i think. won't there be any problem? if it is done like that?
pls tell me the reason, i'm really thankfull for your quick replay
Regards,
BalajiReddy -
While activating the ODS i'm getting these errrors
Hi All,
While activating the ODS i'm getting these errrors,
1) The creation of the Export Datasource failed
2) RFC Connection to the source system is damaged --- no metadata upload
3) Error when activating ODS object
What would be the reasons.............?
Plz Reply back me on [email protected]
Regards,
KiranHi,
Im finding a similar issue but with task SDE_ORA_GLJournals,
the code is :
AND DECODE(, 'Y', GL.LEDGER_ID, 1) IN ()
AND DECODE(, 'Y', GL.LEDGER_CATEGORY_CODE, 'NONE') IN ()]
the parameters are also fine in the parameters file.
Has anyone found a solution or an explanation for this?
Thanks a lot, regards
Nestor -
While installing HANA studio , i am getting Error
Hi Experts,
While installing HANA studio, i am getting Error " Java installation not found" . I have already installed latest JDK, JRE from www.java.com and also set path PATH.
I am on Windows 7 , 64 bit.
Any one have idea how to over come this Error?
Thanks.Hi Tomas,
I am on windows 7 64 bit. How should i verify if jdk has been installed correctly? how to verify if correct path has been set.
I am using hdbinst.exe file.
Here is log entries
19:02:46.064 - INFO: SAP HANA Studio kit detected.
19:02:46.064 - INFO: Looking for java installations
19:02:54.685 - INFO: Found 1.7.0 64bit in C:\Windows\system32\javaw.exe ($PATH)
19:03:01.635 - ERR: No proper java installation found (version 1.6 64bit is required)
19:03:05.137 - INFO: -
19:03:05.137 - INFO: Checking configuration of installation (dialog Define Studio Properties)
19:03:05.137 - INFO: -
19:03:05.137 - INFO: Looking for java installations
19:03:05.137 - ERR: No proper java installation found (version 1.6 64bit is required)
19:03:05.137 - INFO: Parameter "TargetRepositoryPath" is not set
thanks -
I can not get connected to AppStore , DOWNLOAD OR UPDATE ANY OF MY APPS , WHEN I GO FOR INSTALLING , THE MESSAGE SAYS: YOIR REQUEST IS NOT PROCESSED , ERROR CODE, 1009!!! HOW CAN I SOLVE THIS PROBLEM??
Try contacting the iTunes support staff, they do the app store also, at: http://www.apple.com/emea/support/itunes/contact.html
-
While downloading excel template I am getting error in Weblogic 10.3.4
while downloading excel template I am getting error as java.lang.IllegalStateException: Cannot resize buffer - 325 bytes have already been written (Servlet 2.3, sec. 5.1)
Ankit,
You are trying to set speed 1000 on a 10g sfp.
type is 10Gbase-SR
You will need to insert a 1gig sfp and then you will be able to set the speed.
Also, I noticed that you posted first with interface 2/6 and the output you gave me was for 4/6. Are you sure you're in the right interface? -
TS1424 I get error code 1009 while trying to download an application from app stor
I get error code 1009 while trying to download an application from app storp
You will need to do what it says, contact iTunes support. Click the Support tab above, then the Get Started link in the Contact Apple Support area and you'll be guided.
Regards. -
We are using NI configurator 3.1. On our DVC5010f fisher controllers we have replaced potentiometer. While performing calibration thru NI we are getting error code 1802. Can some one explain in plain language what is this means and what can be done to fix this.
We have replaced potentiometer (Travel sensor ) on our Digital Valve Controller DVC5010F (Fisher). After Replacing this travel sensor, we were doing calibration using NI configurator software. During the calibration the software did not recognized the set range (variable) of travel sensor and gave us error code # 1802. These codes are accesible through www.ni.com web site. To get to listing of error codes. go to main page and in search block type in Fieldbus error code and select option 2 from several choices. these gives you listing of error codes. Code # 1802 derived from combination of error codes 0x0002, 0x0800 and 0x1000. These is where I am getting confused ...what is this? can some one explain this in simple term.
Attachments:
FieldBus Error Code 1802.JPG 47 KB
FieldBus Error Code tavel count.JPG 53 KB
Maybe you are looking for
-
Adobe flash player does not work on Firefox, but does on Wind Exp
I have reinstalled Adobe Flash Player many times and also reinstalled Firefox, but flash player does not work. Every tim I try to play something it tells me to install the latest version of flash player. Flash player works fine on on Windows Explorer
-
itunes wont install, runtime error R6034 also 'apple mobile device' wont start! help!
-
How can I delete pages from a pdf file
How can I delete pages from a pdf file
-
HI, I would like to know if it is possible to activate the electronic signature in the BOM (CS01 & CS02). Thanks, Giuseppe
-
How can i find the iTunes U in my iPad mini?
hi, i downloaded the iTunes U in APP's store on my iPad mini, but it doesn't have a shortcut in the homepage. how can i find it out? i feel so doubt of it. do i need to find it out by searching in APP's store??