While back up and restoring the business intelligence site collection in sharepoint 2010

Hi,
i am trying to take backup of business intelligence site collection from one sharepoint server and restoring it to the 2nd sharepoint server,backup and restore successfully completed.i have configured all the performance point services on new server also.
but still i am getting below error:-
An exception occurred while rendering a Web control. The following diagnostic information might help to determine the cause of this problem: Microsoft.PerformancePoint.Scorecards.BpmException: The filter no longer exists or you do not have permission
to view it. PerformancePoint Services error code 20700.
Can anybody suggest me how to resolve these error.
And the dashboard is looking like below:-

Hey Surbi
I'm facing the same issue, actually restored a backup of the BI site collection into a different web app (on the same server) but get the same errors as you!
Looking into it the connection to the report or filter (whatever artefact it is) needs to be refreshed so technically the report doesn't exist as far as the performance web part is concerned!
However when I re-attached the web part to the filter or report I got a different error... 'This data source no longer exists'
So basically I found I had to re-create the reports and filters etc in Dashboard Designer... to re-create the dashboards. I did one page and don't want to spend months re-doing them!
Anyone come up with a way of preserving the web parts references to performance point items and the items connections to their data source in a restore of a site collection?

Similar Messages

Backing Up and Restoring the Message Store v.s. the queue

Hello,
We are running iPlanet 5.2 Messaging Server and need to migrate to another (duplicate) 5.2 Messaging Server. We have all the software installed and the LDAP user accounts created. Now we just need to move the existing mail from one server to the other.
I found the Backing Up and Restoring the Message Store section in the Admin Guide says to back up and restore your data, Messaging Server provides the imsbackup and imsrestore utilities.
However I am wondering about the Queue?
Under <instance>/imta/queue
What is the difference between the Message Store
and the Queue? Can I just backup and restore the Queue using tar or cpio?
Thanks in advance for any advice.
Regards,
Tim

Hello,
We are running iPlanet 5.2 Messaging Server and need
to migrate to another (duplicate) 5.2 Messaging
Server. We have all the software installed and the
LDAP user accounts created. Now we just need to move
the existing mail from one server to the other.
I found the Backing Up and Restoring the Message
Store section in the Admin Guide says to back up and
restore your data, Messaging Server provides the
imsbackup and imsrestore utilities.
However I am wondering about the Queue?
Under <instance>/imta/queue
What is the difference between the Message Store
and the Queue? The Message Store is where messages get delivered to, so you can read them.'
The queue is where messages are temporarily stored, pending delivery to wherever they go.
You can use tar, cpio, or what have you for the queue. Stop the server first. . .
You then just restore the files to the new server. No need to restart or anything like that. Just dump the files in, and run
imsimta cache -sync
to tell the MTA to re-read the queue.
Can I just backup and restore the
Queue using tar or cpio?
Thanks in advance for any advice.
Regards,
Tim

Backup - Restore process of a Site Collection in SharePoint Online

Hi, I have a couple of questions.
1) What do I have to do to get a backup-restore of a site collection in SharePoint Online?
2) Can I myself perform a backup-restore or just backup a site collection without using any 3rd party tool?
Any inputs on these will be helpful. Thanks in advance!

Hi,
what you can instead of backup and restore site is to save it as template, check this thread
http://community.office365.com/en-us/f/154/t/203139.aspx
Kind Regards,
John Naguib
Technical Consultant/Architect
MCITP, MCPD, MCTS, MCT, TOGAF 9 Foundation
Please remember to mark your question as answered if this solves your problem

Backing Up and Restoring the PlayBook

Ok, I've been playing around with Backing Up, Wiping, then Restoring the PlayBook and things don't seem to be functioning as smoothly as I would assume they should. My primary concern is that the data from the Contacts and Calendar programs are not getting restored and the setup information for any Email Accounts is also lost. The data from two third party Apps: Groovy Notes and The Vault is being restored no problem.
ADDED NOTE: The Stock Wallpapers and HD Video Demo have also gone missing.
THE PARTICULARS:
- On a Windows 7 Pro box running BlackBerry Desktop 7.1
- 64 GB Wifi PlayBook running OS 2.0.1.668
- Options set to FULL BACKUP (nothing else)
- using a USB cable and connection
Other behavior that might, or might not be related:
- I did a switch device from 64 GB Wifi to 4G LTE model and the same data was missing
- the BB Desktop 7.1 software can't seem to accommodate more then one PlayBook at a time, meaning that if I Sync or backup one tablet, then attaching the other tablet via the USB cable will cause the device listing of the previous tablet to disappear. It's like it won't allow me to have more then one tablet as a listed device.
Thanks, Rob
My favourite show: BB10, The Next Generation.

"nothing changed" as in it didn't restore the deleted entries?
What I'm thinking is that the desktop software is designed more for BB phones and that there is such a difference in the Contacts and Calendar apps from the phone to the PlayBook (the PlayBooks apps being much more complex and interconnected) that the Desktop isn't equipped to properly backup the PlayBook, so it doesn't. If this is the case, then they should:
1) let people know, because many may think they have a nice safe backup of what could potentially be a very large and valuable chunk of data, when they actually don't.
2) Get working on an update of their Desktop software that properly handles the PlayBook - which they probably are, I would hope.
But all of this is just conjecture on my part, since nobody has responded to my query yet, other then you that is.
My favourite show: BB10, The Next Generation.

While loading site collection in SharePoint 2010, Error shows "Could not find the file or assembly or one of its dependencies. The system cannot find the file specified."

I have restored one web application in SharePoint Server 2010 from a different domain and can complete successfully. Changed each users domain also to old to new one by using Move-SPUser. But While accessing the site collection it is showing an error
that "Could not load file or assembly 'A##.SP.Intranet, Version=1.0.0.0, Culture=neutral, PublicKeyToken=03b4f320ebedaffc' or one of its dependencies. The system cannot find the file specified."
What may be the reason? Please help me to solve this issue since I am stuck up on this .
Regards
Mine1981

Hi Nico
Martens,
Thank you for your reply. But
how can I find out the custom solutions in the source farm. I didn't got any other details regarding this farm other than WSS_Content, Web application Database, SharePoint_Config database back ups.
Please help me to solve the
issue.
Regards
Mine

Looking to back-up and restore the whole iTunes library on the same iMac

Good day,
I’m looking to export my whole iTunes library (contains about 2500 songs and about 20 hours of videos) to a USB external hard drive, and then re importing the whole library back in to the same Apple iMac. I’m doing this because my current iMac is getting a new larger hard drive, and installing a fresh version of Leopard onto this new hard drive.
The tech specs of my current machine: Intel iMac with 250mb hard drive, 2Gig ram with the latest revision of 10.4 Tiger(I think it is 10.4.11), and the latest iTunes version.
If anyone that has a recipe on how to do this, I would greatly appreciate the wisdom and knowledge you may have.
Thank you,
Martin

Copy the entire _iTunes folder_ , not just the iTunes music folder.
When you have everything ready on teh new internal, you can do 2 things.
1 - Copy the entire iTunes folder back to the internal.
2 - Leave it on the external, start iTunes holding the Option key and select *Choose existing library*. Select the *iTune library* file in the iTunes folder on the external.
iTunes will simply now use this for everything.

HT1766 The article refers to "...back up and restore the most important content on your iPhone..."

The article is not clear on what does not get backed up.
There are several Apps that store data and do not provide "export" capabilities.
I have used iTunes and it does not. The "cloud" is more a hindrance than anything else and do not plan to use it.
The only option I can see (within my limited knowledge of iOS) is to obtain "root" admin privileges like in Linux and have full control of the process.
I understand that the only way for me to have such authority is to "jailbreak" my iPhone which in turn would prevent me from getting Apple support.
Not a good position to be forced into, "between a rock and a hard place" :-/

App data is backed up via both methods of backing up. You do not need "root" access at all.
Read: http://support.apple.com/kb/PH12519 and http://support.apple.com/kb/ht4946 for what is backed up.

How To: Best way to Back Up and Restore many DBs ?

Hi Forum,
I have 200 databases (SharePoint databases) that are running on one single instance e.g. (Server1\Instance1), and the names of the databases are e.g.: (DB1, DB2, DB3....DB200).
I want to migrate all these 200 databases to another instance e.g. (Server2\Instance2).
Of course, I can use the SSMS to Back Up and Restore the databases, But, For 200 databases, This is quite impractical.
Therefore, I have two questions:
1) Which option is the safest way to Back Up 200 databases which their sizes combined together could be around 80 GB? Using T-SQL or Maintenance Plan? Obviously, I want a process that doesn't hang or fail.
2) I found the script below on: (http://www.mssqltips.com/sqlservertip/1070/simple-script-to-backup-all-sql-server-databases/) - Is it excellent script? Any better script?, Also, Could you please tell me how to keep the exact name of the databases
without any changes at all (Without appending date nor time)?
DECLARE @name VARCHAR(50) -- database name
DECLARE @path VARCHAR(256) -- path for backup files
DECLARE @fileName VARCHAR(256) -- filename for backup
DECLARE @fileDate VARCHAR(20) -- used for file name
-- Back Up Directory
SET @path = 'E:\Backup\'
-- Filename format
SELECT @fileDate = CONVERT(VARCHAR(20),GETDATE(),112)
DECLARE db_cursor CURSOR FOR
SELECT name
FROM master.dbo.sysdatabases
WHERE name NOT IN ('master','model','msdb','tempdb') -- exclude these databases
OPEN db_cursor
FETCH NEXT FROM db_cursor INTO @name
WHILE @@FETCH_STATUS = 0
BEGIN
SET @fileName = @path + @name + '_' + @fileDate + '.BAK'
BACKUP DATABASE @name TO DISK = @fileName
FETCH NEXT FROM db_cursor INTO @name
END
CLOSE db_cursor
DEALLOCATE db_cursor
3) Any script for restoring all these databases from the Backup directory to the new SQL Server instance (Server2\Instance2) ?

You would have to develop the script for a single database move, test it thoroughly, then write the dynamic SQL WHILE loop.
At any rate, this appears like a good task for an experienced DBA
and not for a Data Architect.
Here is another example for a dynamic SQL WHILE loop:
http://www.sqlusa.com/bestpractices2008/rebuild-all-indexes/
PowerShell is another alternative:
Copy user databases to a different server with PowerShell
Kalman Toth Database & OLAP Architect
SQL Server 2014 Database Design
New Book / Kindle: Beginner Database Design & SQL Programming Using Microsoft SQL Server 2014

Backing up and restoring site definitions

Losing your site definitions in Dreamweaver can be a disaster, but it does happen sometimes. The best way to prepare for such an eventuality is to back up your site definitions on a regular basis.
Creating a backup
You can back up all your site definitions in a single operation by selecting Site > Manage Sites. In the dialog box that opens, Shift-click to select all site names, and then click Export.
In Dreamweaver CS6, the Manage Sites dialog box looks like this:
In earlier versions of Dreamweaver, it looks like this:
Dreamweaver asks if you want to include passwords and login details (this is the default option). Whichever option you choose will be applied to all sites, so click Cancel if you want to treat some sites separately, and export your sites in two sets by using Ctrl/Cmd-click to select them.
When you click OK, Dreamweaver asks where you want to export the definitions. Navigate to a suitable location, leave the File name field unchanged, and click Save. Although only one site name is listed in the File name field, Dreamweaver exports all the site definitions as .ste files in a single operation.
NOTE: This process backs up only the details of your sites, such as the location of the root folder, FTP details, and so on. It does not back up the actual files in your site, such as .html (or .php, .asp, .cfm) files, images, and style sheets. It's a good idea to use your normal file backup routine on your actual files from time to time, as well as exporting the site definitions.
Restoring site definitions
In the event of losing your site definitions in Dreamweaver or moving to a new computer, open the Manage Sites dialog box, and use the Import button to navigate to your backup .ste files.
What if I don't have a backup?
Often, if you don't have a backup of .ste files, you need to go through the whole process of re-entering the details for each site manually.
However, you might be able to restore them by using a restore point on Windows or Time Machine in Mac OS X.
On Windows, the site definitions for Dreamweaver CS6 are stored in the Windows Registry at HKEY_CURRENT_USER\Software\Adobe\Common\12.0\Sites.
In Mac OS X, they are at Macintosh HD:<username>:Library:Application Support:Adobe:Common:12.0:Sites:Site Prefs.
In recent versions of Mac OS X, the Library folder is hidden. In the Mac Finder, select Go > Go to Folder, type ~/Library in the search field, and click Go.
Dreamweaver CS5.5 site definitions are in the same location, except use 11.5 instead of 12.0. The numbers for CS4 and CS3 are 10 and 9 (without a decimal fraction) respectively. For earlier versions of Dreamweaver, substitute Macromedia for Adobe, and adjust the number accordingly.
If you don't have a backup of the actual files on your site, download the files from your remote server.

Hello,
We are running iPlanet 5.2 Messaging Server and need
to migrate to another (duplicate) 5.2 Messaging
Server. We have all the software installed and the
LDAP user accounts created. Now we just need to move
the existing mail from one server to the other.
I found the Backing Up and Restoring the Message
Store section in the Admin Guide says to back up and
restore your data, Messaging Server provides the
imsbackup and imsrestore utilities.
However I am wondering about the Queue?
Under <instance>/imta/queue
What is the difference between the Message Store
and the Queue? The Message Store is where messages get delivered to, so you can read them.'
The queue is where messages are temporarily stored, pending delivery to wherever they go.
You can use tar, cpio, or what have you for the queue. Stop the server first. . .
You then just restore the files to the new server. No need to restart or anything like that. Just dump the files in, and run
imsimta cache -sync
to tell the MTA to re-read the queue.
Can I just backup and restore the
Queue using tar or cpio?
Thanks in advance for any advice.
Regards,
Tim

I generally back up and restore my iphone every week... and this time i backed it up..and i can see that backup time and file size.. now.. when i try to restore my iphone.. i select the back up and now it is taking forever to restore. help me

i generally back up and restore my phone every week.. just that i dont have any problem with the network issues. !!
today at 00:46 1st june.. i backed up my iphone and it was perfect...
when i try to restore it.. it is taking 15+ hours .. and that time stays like that for almost 3 hours... it does not happen.
i even called the apple help center. and they said me to install as a new device... and when i said what wil happen to my messages.. they say .. they wont stay.. and wil be deleted.. and all my apps i need to download again..
but earlier i din need to do any of it.!!! it worked really fine .!!!
please help me..!!! i got some important details in this back up.... please help me.!!!

Once in a while the restore process seems to mess up. What I don't understand is why you would perform a weekly restore.
At any rate, if you must restore, perform a device reset (settings>general>reset) and then you will have the opportunity to restore from iCloud. Restore a device whenever it no longer works correctly, not just as a matter of maintenance. If it ain't broke, don't fix it.

I have the email confirming iphone is unlatched but need to unlock through itunes. To do this, do I use old sim or new sim? I have backed up and restored but there is no message from itunes saying the phone is unlocked? Please help

I am having problems unlocking my iphone 5. I have received an email from my old provider confirming that the phone is being unlatched and I need to complete the process through itunes. I have backed up and restored but I have not received a message from itunes stating the phone is unlocked. Do I use the old or new sim card while connecting to itunes or does it not matter. I dont know what else to do to finish the unlock?

You can use either, but if you restored to the backup, then you will not see the message. You need to restore the device as new first, then restore the backup. Make sure you can continue with the unlock first. Many of the emails report, "Your unlock has been approved, restore your device in iTunes in 24 hours", or something like that. If it is ready to go, then as I said earlier, restore as new first, and then you should see the confirmation.

HT201269 Transferred from iPhone 3GS to 4. Backed up and restored, perfect. New phone is connected to our wireless but is still giving me the "no service" in the upper left corner. Help????

Transferred from iPhone 3GS to 4. Backed up and restored smoothly. Still getting a "no service" message in the upper left corner of new phone. Help?.....

Sounds like your iPhone was hacked to unlock and now updating locks back to the original carrier.
Where did you get the iPhone?

I have forgotten my iPad password and tried to back up and restore my iPad but it says you need to unlock your device before you restore it but that is the whole reason I am trying to restore my iPad. Can anyone help?

I have forgotten my iPad password and tried to back up and restore my iPad but it says you need to unlock your device before you restore it but that is the whole reason I am trying to restore my iPad. Can anyone help?

Forgotten passcode or device disabled after entering incorrect passcode

HT1414 HOw do I back up and restore If I plug my ipod in and it does not appear in the devices column. I have a white screen and i'm trying to fix it and nothing is working :(

How do I back up and restore my ipod touch if when i connect it to itunes It does not appear in the devices column? I have a white screen and have tried holding down the wake/sleep and home buttons and that is not working. Please help

Take it in for repair/replace to your local Apple retailer.

I keep on getting an error when logging onto my whatapp telling me about connecting to itunes, Ive now backed up and restored but im still getting the same message connect ot itunes for push messages

I keep on getting an error when logging onto my whatapp telling me about connecting to itunes, Ive now backed up and restored but im still getting the same message connect ot itunes for push messages

Hello there, Minig1501.
The following Knowledge Base article has some information on the message you're receiving:
Unable to use Apple Push Notification service (APNs)
http://support.apple.com/kb/TS4264
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

While back up and restoring the business intelligence site collection in sharepoint 2010

Similar Messages

Maybe you are looking for