While doing changes in GRR2 no transport request is generated( report paint

Hi Gurus,
        when i am changing the report painter (GRR2), no transport request is generated.Actually when i am changing the following........
              Trial balance......... liabilities          from               to
                                                             100000           199999 (allready existing)
                                                              600000           690000 (new range while doing this,not generated transport request)
please do needful,
Regards,
Rmesh.

Hi,
Changes in report painter do not generate change request. You can either create a transport automatically by going to GCTR transaction or you can simply export/import the changes by going to GR37/GR38 transactions.
Regards,
Eli

Similar Messages

  • Change the owner of transport request

    Hi,
    I want to change the owner of transport request. How can i do this ? Plz. Help.
    Regards
    Sandeep

    Hi
    Go to SE10, Enter the transport request number and press F5 to change the owner as per your req.
    Regards
    S.Senthil

  • How to retrieve the Sapscript layout changes for a particular Transport request in development server after this Transport request so many requests created  ?

    Dear Abapers,
    I request the Abapers kindly reply for this blog
    I want to retrieve the sapscript layout changes for a particular transport request in development server after that many transport request created and moved to quality ? 
    I checked in SE03 transaction the transport request was there.  But I want to retrieve the existing transport request which is not moved to Quality?
    Is it possible to retrieve the existing transport request in development which is not moved to quality ?
    Like how we retrieving the programs using versions in development server,  In the same way I want to retrieve the sapscript layout in development server ?
    Thanks & Regards
    Muzeebur Rahiman.S

    Hi,
    There is no version management for SapScript or Smartforms .
    When you write "transport request in development which is not moved to quality" - was the transport ever released and exported from the development system? If yes, and if the "Transport files" are still available in "Transport directory" (or if the transport files were backed up and could be retrieved), the transport could be imported again. If the TR was not exported, you are out of luck, I believe...
    I would not recommend you do it on your own even if you happen to have enough authorizations (consult with Basis and/or Transport Admin, if you have one in your organization). I would not recommend that it's imported on a development system or QA system, even if the transport contains no other objects - only the SapScript form in question. Import it on a "sand-box" that gets overwritten by system copy from time to time... Once the transport is imported, you should have the old version of SapScript in that system and could analyse the changes and perform manual merge.
    cheers
    Jānis

  • Transport Request No is not population while doing changes in DEV system

    Hi When I doing some changes in DEV system , its not populating Transport Request No . Could you please help me here..

    Hi Its solved now.I just changed the settings in transport connection. Here are the steps..
    go to RSA1 --> Transport connection--> EDIT-->TRANSPORT-->SWITCH _ON_STANDARD.
    It now populating tr req no all the time if there is a change in DEV.
    Thank you.

  • How to change Client of a Transport Request?

    Hi friends,
    I am trying to Change the clien of a Transport Request in se01 but the field is disabled.. Is there any way to change the Client of a Transport Request?
    Pls Help me.
    Regards
    Venkatesh.S

    Why you want to change the client ?
    I assume, you are not talking about changing the traget system client but the client of the source system TR  ie for ex 100 or 120.
    If the Development Server has two clients say 100 (Configuration) and 120 (Development and Unit Test) then for configuration changes Functionals will get the TR created in 100 where as we developers get the TR created in 120.
    For Development,if you get a workbench TR in 100 client but trying to change the program in 120,then while saving the changes in the TR it will not let you save your changes because the TR is created in 100 but you are trying to use that TR to capture the changes that you are doing in 120.
    To my knowledge we can't get THIS client changed,instead we need to get a new TR in the client say 120 where the workbench changes are supposed to be done.
    K,Kiran

  • How can we change the "Unclassified" in transport request???

    Hi All,
      how can we change the "Unclassified" in Sub Request Description while creating a new transport request
    Thanks,
    Andy

    Hello Roger,
    Try to open your TR and in the Request/Task menu at the top, select Change task type.
    Hope it helps.

  • ChaRM: read categorization of change docs based on transport request ID

    Hi There,
    We have ChaRM implemented with 4 level categorization. I am writing a report to find change docs and read their categorization based on a transport request attached to the change doc. Unfortunately I can't figure out the connection. Could you pls give me guidance? Thanks in advance!
    Ádám

    In the meantime I found a very useful article on the wiki: http://wiki.scn.sap.com/wiki/display/Snippets/Reading+CRM+Transaction+Categories+Hierarchy
    If you need my complete code, drop me a mail.
    Thanks,
    Ádám

  • Include changes of PH in transport request.

    Hi Experts,
    Able to create transport request which is available in TCode SCAL to transport PH/ Calendar. How can i include only my changes in the transport request.
    for eg. if i have created new holiday calendar "NI" and new holidays id's. How can i include in transport request only my calendar NI and holiday id's.
    Kindly guide.
    Regards,
    M Bharath

    As far as I know, all the tables pertaining to Statutory Holidays, Holiday Calendars and Business/Factory Calendars will be included in the Workbench Transport.
    It may be possible to delete some of the tables from your transport, but I would not recommend it.
    Don't forget that your changes will not have an impact unless you re-generate the Work Schedules using the NI Calendar, and that will be a separate Customizing Transport.

  • How to change description of released transport request

    Hi experts,
                The transport requests tasks and are released and owner of TR also released, now need to modify description.
                Is their any possible way to do it, because transport is not moved out of the system.
    Thanks,
    Pavan

    Hi
      There is one way to achieve this.But this s not advisable.
    1.) Got o FM 'TRINT_CHECK_REQUEST_CHANGEABLE'
    At the line number 111 IF is_request_header-trstatus CA sctsc_states_released, put the break point.
    1.) Double click the released request which you want to change the description.
    2.) your EDIT option will be disabled. Just type '/h' in the tcpode area and press enter, your debugging will switched on.
    3.) Then Press ENTER again, it will open the debugger screen, in the variable change the SY_UCOMM field to 'WB_DISP_EDIT_TOGGLE' . Then press F8.
    4.) your control will be in the FM 'TRINT_CHECK_REQUEST_CHANGEABLE' line number 111. Try to skip this IF condition by using debug technique.
    5,) Now you can change the description.Now you cant save this as Save button is disabled.Just press back button, you will get the message for save the changes.Just save it. Done.
    Thanks and Regards,
    Senthil Kumar Anantham.

  • Undo changes included in a transport request

    Hello,
    I made the changes in DEV system and included those changes in a transport request. I didn't released this transport. Then I realized that those changes must be reverted. What should I do now? How can I undo those changes? Thanks

    Revert back your changes you had done if required.
    Then SE09 --> Display your request No.
    Expand your main Request Folder --> Below your main Request No you can see Child Request No. Double click on Child Request No. Click on Change Mode or press Ctrl+F1 . Then under Object Tab you can see objects.
    Select Those objects and click on Delete Row which is be a second button having RED marked minus symbol.  It will give message like object is locked press ok. Automaticaly object will be removed from request. Do same procedure for all oject one by one.
    Regards,
    Sushant

  • Change object from one transport request to another

    Hi,
    I have a requirement wherein i need to change the object from one transport request to another. The thing is that i have saved
    one in one transport request and when i am trying to transport it , it is not allowing me to transport as this transport request
    contains some inactive object. I have also tried to delete that object from this transport request and put in another one
    but when i tried to do that i was only allowing me to create sub task within the same request .
    Kindly suggest me
    Thanks
    Parag

    Hi,
    you can either just delete the object from the object item list of the first transport request (just click away all warnings and hints). Then put it into a new request, lock it and transport it. You might ned to overtake the responsibility for the first request but with the appropriate authorization this should be no issue.
    Other solution is using a transport of copies. This will tell you the object is locked in another request when you release it but still allow to transport it.
    In all solutions you have to be sure that transporting the object without all other stuff in the request is possible as the objects are independent from each other. Otherwise you will not be able to import the request in the destination system.
    Rgds.
    Roman

  • Doing a Roll Back for Transport Request

    Hi,
         I have a situation where I wanted to bring all of my objects (IDoc Type, Message Type etc...) under single request but when I did that, I am unable to test my Inbound Function Module (Custom). It gives me an error saying "Interface for this function module is incorrect". But before changing the transport request, everything was working fine.
       So, can somebody tell me how to roll back the changes done in Transport Organizer?
    Thanks,
    Venkat.

    * dschaldenovell,
    it's just a service pack, so you could manually downgrade the RPMs and that's it. But to be honest, I wouldn't expect any problems, and if, Novell support should be able to resolve them quickly.
    Uwe
    Novell Knowledge Partner (NKP)
    Please don't send me support related e-mail unless I ask you to do so.

  • How to find out the transport request that a report is locked to?

    Hello Experts,
    I have to transport a report to production system.
    The report has already been assigned to a transport request.
    How do I find as to which transport request is the particular report assigned to.
    Any place where I can check for the locks on a report ?
    Any advice is very much helpful...

    Hello Venkat,
    Thanks for the prompt reply.
    Actually i had tried it. but unfortunately, NO request number is shown. The Only nessage i'm getting is
    " Source systems can not be transported."
    The report is opening in RRMX in change mode.
    This implies 2 things,
    1. The report is already assigned to a transport request. OR
    2. Its assigned to $temp.
    But if the report is stored as $temp, while tranporting in transport connection, it should ask for a transport request and also ask for the development class. Which is not happening
    Any other places to look for ?????

  • 2 Transport Request for a report

    Hi Experts,
    I am having 2 Transport requests for the same Z report (classical report).
    I have transported both of them to quality on after another with different modifications in both of them.
    Now i want to transport it to Production.
    I want to know do i need to transport both the requests or do i need to transport only the last
    Transport request to production ?
    Please help <removed by moderator>.
    Edited by: Thomas Zloch on Jun 16, 2011 10:33 AM

    Hi,
    As per SAP Best practice there shouldnt be any floating TRs in Quality system which are not moved to Production. Which means all the transports which move from Dev to Quality should be moved to Production. If there is any unwanted change which is moved due to a TR, then a correction request should be created & released to subsequent systems.
    Hence in your case move both the TRs in the same sequence to Production.
    Thanks,
    Best regards,
    Prashant

  • Including reports to a transport request using a report

    Hello,
    I have a set of programs nearlu 450. I have to include all these programs into a single Transport Request number.
    I wanted to write a program for this.
    Can any one give me suggessions to do this.
    Good suggessions will be appreciated through points
    Thanks in advance.
    Best Regards,
    Sasidhar Reddy Matli.

    Hi Sashi
    Have a look at Report-TH_TKANL and below FMs
    TRINT_INSERT_NEW_COMM / TRINT_MODIFY_COMM/TRINT_ORDER_CHOICE and TRINT_APPEND_TO_COMM_ARRAYS
    Kindly reward points if helpful
    Thanks & Regards
    LK

Maybe you are looking for

  • Connection error in "Dual mode"

    Yesterday, after 2 months of normal usage, my E61i, settled on "dual mode", stopped to work. On the screen it appears instead of "3G" the symbol of an antenna (GSM connection) without the name of the operator. If I try to make a call it doesn't work

  • Text overflowing text fields

    Hi all, We created a PDF form which our client intends to send out to their clients. The problem is that the form doesnt work for them (works fine for our team using up to date Acrobat) so Im guessing they are using an older version of Acrobat. We ar

  • Crash iTunes when moving files in downloads list?

    Twice in a row now I've been able to crash iTunes when moving files in the Downloads list (trying to change the priority). This happened twice when I tried to drag a file up above the list to get the list to scroll. iTunes would thrash the disk for a

  • RG23A Part II: Ii the Sum of Ecess and HECess column missing last value

    All SAP Gurus, In RG23A Part II register, in the total column, all the values of BEB, ECess and HECess are displayed correctly. But the total of ECess and HECess sre coming wrong (last figure of every month is not considered in the total of that mont

  • Is there any Deploy Tool

    Hi Friends, Is there any deploy Tool in Weblogic 6.1 similar to one that comes in J2sdkee Server from sun. If yes how to get it in Weblogic I have got a demo copy of WL6.1 Thanks Manoj