While doing MIGO transaction system showing error: Check table169P the entr

Hi experts,
while doing MIGO transaction system showing error: Check table169P the entry BP01 does not exit.
pls do needful.
Thanks&Regards
sreenivas.p

Hi,
Please specify Whether you are doing Blocking of Invoices or what?
As the T169P is A Parameters Invoice Verification, so you can check the values for T169P table in SE16 so that you will get Clear idea regarding  company code BP01 in which the stochastic block is active with Threshold value for stochastic block...
Please check....
For maintaining Entries please go to OMRG maintain Company code and Threshold value as per client requirement so that This will specifies the degree of probability that an invoice is stochastically blocked.
Regards,
Ninad Kshirsagar

Similar Messages

  • While doing PGI I system getting Error

    Dear SD Experts,
    While doing PGI in delivery system getting Error   "The batches are not defined for delivery item 000010".
    Error Massage :- Message no. VL605
    I already defined Batches to the given item. Its appearing Under Material and its specified in Batch split Tab.
    Kindly suggest me where I was wrong and what configuration I missed.
    Regards,
    Manzoor Ahmad

    hi
    select the stock against the batch which should be equal to delivery quantity.
    that means delivery quanquantity should be equal to picing quantity.
    after selecting manually press F3 to go back.
    system will give a POP UP message say YES
    then the batches against the quantity will be copied in the delivery document
    again go back you will come to over view of delivey screen
    then in picking tab page you will find all picked quantity if not give it manually
    and save the delivery document with out pressing PGI.
    hope this clears your issue
    balajia

  • While doing migo gertting error does not support serial management

    while doing migo 101mvt type getting error does not suppoert serial no management .
    Moderator: Please, avoid asking basic one-sentence questions. Your other threads were locked for the same reason

    Hi,
    Can you please check SAP Note 1262966 - MIGO and MIRO: Missing entries in T169P. This might be of some help to you. It states that
    You use transaction SM31 to delete an entry in the views V_169P_A, V_169P_B, V_169P_DC, V_169P_IRTAX, V_169P_K, V_169P_LOGO, V_169P_MB, V_169P_PA, V_169P_PR, V_169P_S, V_169P_SA or V_169P_SV. The entry from the table T169P is deleted when you delete the entry from one of the views.
    Different follow-on errors can occur in the transactions for inventory management or the Logistics Invoice Verification.
    Error M7 001 "Check table 169P: entry & & & does not exist" occurs in the transactions for inventory management. The system does not propose any data for order-related items in the transactions for the Logistics Invoice Verification.
    The entry in the table T169P is required for each company code for the function from Note 980420.
    Thnx,
    SG.

  • Spool error while doing migo

    Dear MM Experts,
    While doing migo i am getting error as "Error in spool c call spool overflow"
    Got this thread but not getting exactly : http://forums.sdn.sap.com/thread.jspa?messageID=4528971#452897
    Please help me out.
    Thanks & Regards,
    Sandeep.

    Hi all
    Delete the old spool request using SPAD .
    regards,
    reza rostami / mapna

  • While doing MIGO system giving error massage "No account was specified for account type "D" in item "0000000001"

    Hello,
    While doing MIGO system showing error " No account was specified for account type "D" in item "0000000001"
    Kindly help me to resolve this issue.
    Regards,
    Abhijit

    Hi,
       Your issue seems to be an issue in FI. Refer the similar thread: MIGO error for UNBW material and the note: 1027645 - Message F5670: Account not specified in item X
       Found a similar issue in J1IS as explained in the KBA:  1932095 - Error : F5670 - ' No account is specified in item 0000000002 ' - in transaction J1IS
    Regards,
    AKPT

  • Balance in Transaction currency while doing MIGO

    While doing MIGO, getting the error '' Balance in Transaction Currency'' and showing the total of Excise and Cess amounts.
    Urgent issue. Appreciate if you could respond asap
    thanks
    Sridevi

    hi
    sridevi,
    pls verify the raw material inventory account or the GR/IR clearing account, u might have checked only balances in local currency, or it could be in raw material master records, where in u might have selected the foreign currency valuation
    cheers
    bala reddy

  • Error while doing MIGO

    Hi Experts,
    While doing migo system showing the error message:
    in this purchase order no excise.
    It is IS OIL process.
    Maintain pricing conditions for the material for the excise invoice date
        Message no. 8I629
    Pls help some one.
    Regards,
    Hanuman.

    HI
    is it Excisable Material, did you maintain  the Tax indicator in PO stage? IF yes , next step is to check , are you selecting the right Post to....... register menu during MIGO, for example we use Post to Part-1 register only, then if yes , the you are getting this error becuse you have missed the J1ID master data details. Minimum you should maintain 1. chapter_id details, 2. Material and chapter_id combination 3. Vendor Excise details. for the materials you are tring to make GR.
    Best Regards
    SAM

  • Error while doing MIGO for a sub-contracted item

    Hello to Everybody,
    I am facing below problem -
    Error : Incorrect CCtr <Cost Center Code> with this account (CCtr category must=D) for
    <Item Code> , while doing MIGO. (for receiving sub-contracted item from vendor).
    May I request for possible solution to above error ?
    regards,

    Dear Sanjay,
    You can determine the cost object for the posting of the  costs in the transaction OKB9.
    Following thread should resolve this issue:
    Re: cost of subcontracting
    Regards,
    Naveen.

  • While trying to run it show error message : "The application or DLL C:\Program Files\Mozilla Firefox\sqlite3.dll is not a valid Windows image. Please check this against your installation diskette

    Just updated firefox. While trying to run it show error message : "The application or DLL C:\Program Files\Mozilla Firefox\sqlite3.dll is not a valid Windows image. Please check this against your installation diskette." Tried to download and install new firefox, but it alway show that the file is corrupt
    == Today ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; InfoPath.2)

    Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
    Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
    It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    You can skip the step to create a new profile, that is not necessary for this issue.
    See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • Error message while doing MIGO.

    Hi,
    I am getting error message while doing MIGO. Can some one help me out in this issue.
    Consolidated companies 0 and 5686 are different
    Message no. F5 080
    Diagnosis
    The number of the affiliated company must be clear for the selected document type for all line items. In this case at least two different companies or a company in connection with a business partner who does not belong to a company are stated.
    Procedure
    If you selected the correct accounts, you must enter the document with a document type that allows cross-company posting. Otherwise, please correct the entered account.
    Thanks in Advance,
    Subhajo

    Check Fi customizing in OBA7.
    As you mentioned MIGO, I assume you are doing goods receipt, so you use document type WE.
    Within WE you must not have selected  the field inter-company posting .
    Best you place the cursor into this field and press F1 for detailed explanation,

  • Windows vista system, continuously trying to download a DRM file in Adobe Digital Editions application shows "Error check activation". I have authorized the Fire Wall and still the same.

    windows vista system, continuously trying to download a DRM file in Adobe Digital Editions application shows "Error check activation". I have authorized the Fire Wall and still the same.

    Since Re-activation as suggested by the link above is not working for you, Can you please confirm the following:
    The OperatorURL is reachable. ( you can find the operatorURL from the acsm file by opening it in notepad,etc)
    And Book is still available on the book-store for purchase.
    (If any of first two are not available, you might have to talk to distributor for next action item to get the book. Since you will have record of purchasing the book, (in my opinion) they should provide you the new token for downloading the book)
    And please confirm this that you used the same userID for downloading that you used when you first fulfilled/downloaded the book.
    (If it is the case, then you have to use the correct userID)
    I hope it helps.

  • While doing migo-goods receipt for production

    I am getting above message while doing migo
    please help
    Batch 0000000027 has the status <restricted-use>
    Message no. M7670
    Diagnosis
    You are attempting to post a batch with status <restricted use> for a goods receipt.
    System Response
    Depending on the system setting, the system issues either a warning or an error message.
    If the message is a warning (W), the system will accept your entry, but simultaneously issues a warning to prevent you from making the wrong entry.
    If the message is an error message (E), the system will not accept your entry.
    Procedure
    Make sure your entries are correct.
    thanks in advance
    kailash N. thakkar

    Dear,
    You cannot change the status of a batch (unrestricted/restricted) in a goods movement, only with the following functions: by maintaining the batch master record manually in MSC2n
    Got MSC2N On the initial screen, enter the batch data (material,plant batc).
    Select the indicator restricted-use.
    Check out the "Initial status of new batches" in transaction code OMAB whether your new batch status flaged for "Restricted" against your material type.
    Then go ahead for MIGO.
    Regards,
    R.Brahmankar

  • J_1IRG23D Table was not updated With Correct Values While Doing MIGO

    Hi Friends,
    I am new to the Excise duty , facing a proble in CIN -While doing MIGO, the Excise Calculation are coming correct values (i.e 10% ),but in the table it was not updated correctly (J_1IRG23D) only one entry is showing wrong ,the other entries in the table are correct.
    In table -J_1IEXCDTL the EXBED it was with correct value 10% of the Base value
    But In table -J_1IRG23D the EXBED,ADE,CESS It was updated with 0.06% on the base value .its gives wrong value
    Kindly help in this issue.
    Regards
    Siva

    Hi,
    Go to T Code - J2I5 (not 215 it is j 2 i 5) enter details and select register PLA Check box and execute. This can be extracted many times - no problem.
    After J2i5 balance will update in registers including tables.
    Ramesh

  • I am getting error (-1) while updating my iPhone 4 to iOS 5.1. The phone has gone into a recovery mode. Restore fails every time at "restoring the firmware" stage. Striped bar remains for a long time, then shows "error (-1)" and the restore fails. Help!

    I am getting error (-1) while updating my iPhone 4 to iOS 5.1. The phone has gone into a recovery mode. Restore fails every time at "restoring the firmware" stage. Striped bar remains for a long time, then shows "error (-1)" and the restore fails. I have been doing it for last 12 hours. Help!

    Thanks for your reply Michalo. I am in India and here Apple care does not work on Sundays. I have been without my phone for the entire day. Perhaps tomorrow will bring some respite. There is not solution to "error (-1)" on any forum it seems. I found one forum which suggested use of Tiny Umbrella. Any idea about that?

  • In Depot Plant while Doing MIGO MRP indicator not found

    Dear All,
    We have one depot plant. for capturing of excise duty while doing MIGO
    I have not found the MRP indicator check box in excise ->misc. Tab.
    But for doing this same process for other manufacturing plant means non Depot plant I have found the MRP check box in excise ->misc. Tab.
    Is there any process to capture the MRP check box indicator in excise ->misc. Tab while doing MIGO for Depot plant or is there any process to book excise duty while doing MIGO for Depot Plant

    Please go through the Scenario #: Dealer Procurement in Excisable Depot scenario in the below link.
    http://scn.sap.com/docs/DOC-45855

Maybe you are looking for

  • How can I export songs from my ITunes library to a different MP3 player?

    I need to copy some songs (or a playlist) from my ITunes library to a non-IPod MP3 player. Thanks, Leonid

  • Problems with System Update 3.14.0019 after installation SP2

    Have you encountered problems with System Update 3.14.0019 after installation SP2 for Windows Vista?  After this upgrade I view  this error: "An error occurred while gathering user information." Thanks for the help

  • Product Safety Automatic MSDS shipment

    Hi everybody, I am doing a feasiblity study on implementing the product safety module for MSDS shipment. I would like some clarification on the implementation steps. The scenario is: MSDS documents are created and stored outside SAP. I am able to cre

  • PO qty Should not increase PR Qty

    Hi Here the requirement is, PO qty Should not increase PR Qty If buyer change / increase the PO qty then the system should give error msg. It should not allow. How to do this? Vijay

  • How to export XML data dynamicly by OAF?

    Hi I have tried to export some data by XML Template, using TemplateHelper.processTemplate. Here is a trouble that the columns are dynamic: Vendor A, Vendor B, Vendor C...... The record in VO will be as below: Requirement Supplier Score Requirement1 S