While i was updating my iphone5, it showed that my sim card is not applicable. even after changing the sim card, i am not able to update or restore my iphone. what should be done?
while i was updating my iphone5, it showed that my sim card is not applicable. even after changing the sim card, i am not able to update or restore my iphone. what should be done?
Hi there aliyan,
I would recommend taking a look at the troubleshooting steps for "No SIM" found in the article below.
If you see 'No SIM' alert on iPhone
-Griff W.
Similar Messages
-
I can't upload new apps or updated apps, and it shows that I have problem with last purchase. I guess my credit card is over limit and the purchase is not completed because of uncollected. I have filled up some to my credit card. Will it deduct later?
The problem is I have no computer to use the Itunes and can't go to last purchase. Also, I have ipad 2 using the same adminstrator and have the same problem.Same thing happened to me with my peruvian credit card in the peruvian app store, I want to buy an app, but it says that my credit card is "not supported in the Peruvian app store"
-
My canon sx120IS continues to show low batter and shuts off even after changing the batteries.
My canon sx120 is continues to show low battery and shuts off even after changing the batteries. Any suggestions? Do I need to send it for repair somewhere, and if so, where?
Hi LB!
Thank you for posting on our forum!
Try cleaning the electrical contacts on the camera and the batteries using a soft microfiber cleaning cloth. If the same warning still displays, then the camera will need to be serviced. To start the repair process, you'll need to complete a Repair Request on our website.
If the camera is more than a year old, you may participate in the Canon Loyalty Program instead. The Canon Loyalty Program option allows you to replace your current camera for a discounted fee, plus shipping. The original non-functioning camera would then be returned to Canon USA for recycling using a prepaid shipping label that would be provided.
If you would like to take part in this option, please call our Sales Department at (800) OK CANON (800-652-2666) seven days a week, 8am to Midnight. Let them know you have been working with online support and the Canon Loyalty Program was offered. Be sure to have your serial number for your camera at the time of your call.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well. -
The screen of my iphone 4 is blank and the phone does not respond even after pressing the on/off and home button, the only reaction is the vibration felt when I plug in to charge the phone. What should I do?
This is the ipod touch forum
-
My PW in iTues will not work. Even after changing it. Window pops up and ask for PW. Over and over.
I would be worried about that - but it may turn out to be nothing.
Since you already changed your password, you're probably OK - but I recommend looking at your purchase history to see if there's any unauthorized purchases (use iTunes on your Mac or PC to go to the itunes store, then click your account in the upper-left or upper-right corner). If there are any new purchases that you didn't make, click the button to report problem (and if they happened after you reset your password, you should immediately change your password again).
I think sometimes when you change your password and verifiy your credit card info, it can "reset" the warnings - so it may actually have been you logging in to your own account that caused you to get the warning. But I'm not absolutely sure of that, so it's best to check your purchase history (and reset your password if necessary - but you already did that).
I also recommend turning on "two-step verification" (but Apple makes you wait a few days after changing your password to turn that on). With "two-step verification", Apple will send you a text message with a 4-digit code the 1st time you try to buy something from a new computer - since a hacker won't have your phone, they won't be able to continue (theoretically). After the 1st time, it goes back to mostly working normally (until the 1st time you try to purchase from another new computer, then you get another text message - so this alerts you to someone, somewhere else, trying to get into your account). -
So I've created a Software Update Group and I did NOT want anything in there dealing with Internet Explorer 11 since the organization is currently stuck at using 10 as the highest. So I made sure that Internet Explorer was NOT in the list and then I deployed
the package.
After running my Overall Compliance report it shows that the systems are compliant, but when I view the "Compliance 5 - Specific Computer" I see that "Internet Explorer 11 for Windows 7 for x64-based Systems" is listed in the report.
This is just a testing phase right now and I have not created a WSUS like Domain level GPO. I understand that the SCCM client creates a local policy on the clients for the location of the Software Update Point (Specify
Intranet Microsoft update service location), but the "Configure Automatic Updates" policy is set to Not Configured, which it looks like when this
is set, the "Install updates automatically (recommended)" at 3AM is the default.
Is the reason why the "Internet Explorer 11 for Windows 7 for x64-based Systems" update is showing up in the list due to the fact that the "Configure
Automatic Updates" policy is set to Not Configured
and therefore it is still reaching out to check Windows Update online?
So, if I do create a Domain level GPO to Disable the "Configure
Automatic Updates" policy, then the "Internet Explorer 11 for Windows 7 for x64-based Systems" update would not show up in the "Compliance 5 - Specific Computer" report?
By the way, I have a Software Update Maintenance Window configured for the hours of 1AM-4AM so the 3AM default time falls within this time frame, therefore, I am assuming the SCCM 2012 client will not allow the Windows Update Agent to install the "Internet
Explorer 11 for Windows 7 for x64-based Systems" update, even though it has detected it is "Required".
ThanksBut, don't you need a Deployment Package in order to deploy the Software Update Group? The Software Update Group uses the downloaded updates contained in the Deployment Package located in, wherever the Package Source is, right?
One more quick question that you will know right off hand, because, well, you just will I'm sure.
No. The software update group really has nothing to do with any update packages. The update group assigns updates to clients and in turn clients use update packages to download assign and applicable updates from. There is no connection between the two though
as the client can download an update from any available update package. Thus, it's more than possible to updates in an update package that are not in any update groups and it is also possible for an update to be in an update group without being in any update
package.
If the "Configure Automatic Updates" policy is set to "Not Configured" and since this keeps the 3AM Automatic Updates default, if I was to remove the Software Update Maintenance Window from being between 1AM-4AM, will the WUA agent install updates
at 3AM, or no because the SCCM 2012 client still manages and oversees it and basically blocks that from occurring?
No, ConfigMgr does not in any way block the WUA; however, the WUA can only autonomously install updates it downloads directly from WSUS. Thus, since there are no updates approved or downloaded in your WSUS instance, there's nothing for it to download and
install. If you happen to actually be going into WSUS and approving updates (which you should not be doing as its unsupported), then yes, it actually would install updates -- this is outside of ConfigMgr's control though. Generally, disabling the WUA via a
GPO is the recommended to prevent any accidental installations or reboots (as the WUA wil also check for initiate pending reboots outside of ConfigMgr).
Lots more info in these two blog posts:
- http://blog.configmgrftw.com/software-update-management-and-group-policy-for-configmgr-what-else/
- http://blog.configmgrftw.com/software-updates-management-and-group-policy-for-configmgr-cont/
Jason | http://blog.configmgrftw.com -
When I open my camera app it doesn't seem to open the actual camera. I went into an apple store and got told to restore it so I have done but it still doesn't open. What should I so about it?
When you restored, did you restore as a "new" device or from backup? If you restored as new, and still have the same issue, you most likely have a hardware problem. Go back to the Apple store to confirm.
-
if any one have the problum solution then give me the solution of that
Physically opening or replacing parts on the iPhone voids the warranty.
Why would you void the warranty on the device? All iPhone 5's are still under the initial one year warranty.
Buy a new one... you obiviously damaged something by trying to repair it. -
I had original iPhoto app from 2007 or 2008, but in the last year it stopped working seemingly out of nowhere. Now I just installed iPhoto 9.5.1 but it won't open even after downloading the iPhoto Library Updater. My pictures are lost in the abyss.
I'm using OS Extended 10.9.5. I don't know what the original version of iPhoto was.I just installed iPhoto 9.5.1 but it won't open even after downloading the iPhoto Library Updater
Have you run the iPhoto Library Upgrader? You need to direct it to the location of your old iPhoto Library by clicking the "Choose Library" button in the lower right corner of the panel you are seeing when the upgrade starts. -
My iPad Air stalled during an update and will not restart even after pressing the on/off button for 15 seconds. Any suggestions?
Have you tried a soft-reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should appear and it should reboot.
-
When i connect my ipad2 to iTune, it show "iTunes could not check for an update to the carrier settings for your iPad. An unknown error occured (1651)". What should i do to solve this problem? My iTune version is 10.1.4.10 and my ipad is 4.3.5.
If you have iOS 7.1 then you must be a developer, so you should be posting in the developer forums : https://devforums.apple.com/index.jspa
-
I just heard a news report that there is a problem with malware in mac computers that came through a recent java update. Is this true? If so, what should be done about it?
As usual those "news" reports mangled the facts and got most of the story completely wrong. This particular attack did not arise through a Java update, it was distributed through a fraudulent Flash download popup window, or malicious websites that Safari is designed to block.
If you run Java on your Mac you may be vulnerable to this malware. If you do not run Java there is no risk. If you routinely keep your Mac up to date with Software Update the risk is greatly reduced.
Shut off the mass market junk that masquerades as "news" and read this to learn some real facts:
https://discussions.apple.com/docs/DOC-3271 -
Hi
My Ipohone4 wen restoring show "We're sorry, we are unable to continue with your activation at this time. Please try again later, or contact customer care." What should be done to restore it.
Can u give a solaution asap.Has your phone been jailbroken or hacked to unlock it from the previous carrier?
-
i buy a macbook air with my friend and i changed the apple id also.at first i can update the application but now its impossible to update the application.when i clock to update it shows the id of my fren andsomebody do you have idea to solve this problem.
The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You — not the previous owner — must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
1. You don't own another Mac.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the previous owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
2. You do own another Mac.
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can boot from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
Once booted in Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
After partitioning, quit Disk Utility and run the OS X Installer. You will need the Apple ID and password that you used to upgrade. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Apple customer service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support. -
My iphone4s can not update any apps. Nor is it able to download any new apps. What should I do?
my iphone4s can not update any apps. Nor is it able to download any new apps. What should I do?
I have two Apple Accounts. One in Switzerland and one in China. I used to be able to updates all of my apps by clicking individual apps. One day I clicked update all by accident. Ever since that, my iphone cannot update any of the apps. Nor is it able to download any new apps. Please kindly let me know how to make the phone back into work with the apps.
Many thanks.I find it difficult to believe that it took you a year to realize your phone was defective.
Restore the phone as new. Wait a couple of days before adding any apps to see if it's running ok. Then, add apps a couple at a time so that, if any of them cause issues, you'll have an idea which one.
Maybe you are looking for
-
I am a teacher in a public school and I'd like to buy Creative cloud with a discount for teachers but I'd use it for my business ( the sole proprietorship) for comercial gain. Is itallowed ? Can I buy it with disount for teachers if I want to use it
-
JTAPI + Xtapi: Urgent help needed with compensation.
Hi I'm new to jtapi. I'm using xtapi implementation with the following statements in Outcall.java sample code. import javax.telephony.*; import javax.telephony.events.*; //import MyOutCallObserver; public class Outcall { public static final void ma
-
Hi, I am using the java program to send the invoices to the different customers. I am able to send the email properly. There are some issues which I need to resolve. 1. Password protection with all the attachments with customer number. 2. Special Cha
-
Receiver SOAP : Parsing SOAP Exception
Hello We have a simple scenario SOAP scenario and we are calling backend service in our Receiver SOAP It seems that issue is with the SOAP Action. Our backend service has multiple SOAP Actions : Endpoint is as follows http://serverID/ABCSoftware/ABC
-
Run my plan in DB automatically
Hi, Some table's field need be calculated at 0:00 in 1, 11, 21 every month, the result will be inserted into another table. I think only trigger is not enough. this should be plan or schedule? using oracle, how to do? regards. wu jianhua.