While loading master data into PSA, the eorror is 'Error from PSA"

Hi All,
While loading master data into PSA, the eorror is 'Error from PSA"
Could you anybody please help in this reagard.
Thanx,
Sridhar.

Hi rakesh,
May be IDOCs not processed completely,
Idoc Problem, Either wait till time out & process Idoc from detail monitor screen, or go to BD87 & process Idoc with status = YELLOW ( be careful while processing IDOCS from BD87, choose only relevant Idocs
Cheers
Raj

Similar Messages

  • Caller-70 Error while loading master data into infoobject

    hi ,
    I am getting following error while loading master data into infoobject (0tb-account). I am loading this master data in production environment for the first time. there are about 300000 records. All have got loaded upto PSA. Infopackage settings were PSA and then into data target.
    Short dump in the Warehouse
    Diagnosis
    The data update was not finished. A short dump has probably been logged in BI. This provides information about the error.
    System Response
    "Caller 70" is missing.
    ST22 dump analysis is as below:
    Termination occurred in the ABAP program "GP476CZYBEF2WX53UZ8TXFG6XOS" - in                  
    "VALUE_TO_SID_CONVERT_DB".                                                                  
    The main program was "RSMO1_RSM2 ".
    Please help as soon as you can..Production problem....
    Regards
    Rakesh

    Hi rakesh,
    May be IDOCs not processed completely,
    Idoc Problem, Either wait till time out & process Idoc from detail monitor screen, or go to BD87 & process Idoc with status = YELLOW ( be careful while processing IDOCS from BD87, choose only relevant Idocs
    Cheers
    Raj

  • Error while loading master data to attribute ZMAJORGU(Major organisational unit)

    Hi Experts,
    While loading master data to  ZMAJORGU(MOU)(info object texts) from  datasource (ZOS_HRP1000)datasource iam getting error in DTP.
    below is the error...
    Diagnosis
        Data record 349 & with the key 'Ship &' is invalid in value 'Ship &' of
        the attribute/characteristic ZMAJORGU &.
    System Response
        The system has recognized that the value mentioned above is invalid, and
        has processed this general error message. A subsequent message may give
        you more information on the error. This message refers to the same
        value, even though it does not state this explicitly.
    Procedure
        If this message appears during a data load, maintain the attribute in
        the PSA maintenance screens. If this message appears in the master data
        maintenance screens, leave the transaction and call it again. This
        allows you to maintain your master data.
    Please find the below screen shots
    I have done the following regarding the issue ....Looking at the error i have gone trough the transformation and i didnt find any routines or formuales
    I have checked the PSA and down loaded the data to spread sheet and put a filter on SHORT and STEXT assuming i will find the value
    'Ship &' as mentioned in the Diagnosis description. However i was not able to find the relavent data(i went to se16 gave teh request ID from PSA and displayed the entire data)tarting with Ship .The closest  value i could find in both the fileds was was AVP Shipment .
    I have the following questions
    1)In the screen short 2 it says record number 349 is it right to go to PSA table and check against the record number 349(i tried that but i was not able to find the error against that record)
    2)why am i not finding the value 'Ship' in PSA ...but this is the value wich is creating a poblem in updating to the target ....does it mean the record value is Ship or it starts with Ship or is ir part of some word?
    Please find the attached PSA data file (u have to convert it to Excel)
    I request people to help me analyse the issue and fix the issue.
    Regards
    Kiran

    Ram
    I checked other records as well they were a lot of smallcharecters upper case charectres ,numeric special charecters .but nothing stopped ...when the system is even accpeting all other charectres  like smallof caps or numeric... why on this record is creating an issue...
    please have a look at error stack
    and i have one more question when i look at PSA there are close to 300000 records
    but when i do an SE16 with request id i see only close to one lakh records (i came to conclusion b dragging down and the last record number was (below screen shot)
    Can you tell me what my mistake is numebr or records are not tallying in SE16 and PSA..

  • What are the tables will update while loading Master data ?

    Hello Experts,
    What are the tables will update while loading Master data ? And requesting you to provide more information about Master data loading and its related settings in the beginning of creation infoobjects. 

    It depends upon the type of Master data u r loading....
    In all the master data loadings, for every new value of master data an SID will be created in the SID table /BI*/S<INFOOBJECT NAME> irrespective of the type of master data.
    But the exceptional tables that get updated depending on the type of master data are.....
    If it is a time Independent master data then the /BI*/P<INFOOBJECT NAME> table gets updated with the loaded data.
    If it is a time dependent master data then the /BI*/Q<INFOOBJECT NAME> table gets updated with the loaded data.
    If the master data is of time Independent Navigational attributes then for every data load the SID table will get updated first and then the /BI*/X<INFOOBJECT NAME> table gets updated with the SID's created in the SID table (NOT WITH THE MASTER DATA).
    If the master data is of time dependent navigational attributes then for every data load the SID table will get updated first and then the /BI*/Y<INFOOBJECT NAME> table gets updated with the SID's created in the SID table (NOT WITH THE MASTER DATA).
    NOTE: As said above, For all the data in P, Q, T, X, Y tables the SID's will be created in the S table /BI*/S<INFOOBJECT NAME>
    NOTE: Irrespective of the time dependency or Independency the VIEW /BI*/M<INFOOBJECT NAME> defined on the top of /BI*/P<INFOOBJECT NAME> & /BI*/Q<INFOOBJECT NAME> tables gives the view of entire master data.
    NOTE: it is just a View and it is not a Table. So it will not have any physical storage of data.
    All the above tables are for ATTRIBUTES
    But when it comes to TEXTS, irrespective of the Time dependency or Independency, the /BI*/T<INFOOBJECT NAME> table gets updated (and of course the S table also).
    Naming Convention: /BIC/*<InfoObject Name> or /BI0/*<InfoObject Name>
    C = Customer Defined Characteristic
    0 = Standard or SAP defined Characteristic
    * = P, Q, T, X,Y, S (depending on the above said conditions)
    Thanks & regards
    Sasidhar

  • While loading transaction data into cube what are the tables generats

    Hi,
    while loading transaction data into cube what are the tables normally generats.

    Hi,
    Normally datas will be loading to 'F'- Fact tables (/BIC/F****) *** - cube name..
    When you do compress the request the data will be moved into E tables.
    Regards,
    Siva.

  • BI 7.0 - Duplicate Record Error while loading master data

    I am working on BI 7.0 and I am trying to load master data to an info object.
    I created an Infopackage and loaded into PSA.
    I created transformation and DTP and I get an error after I execute the DTP about duplicate records.
    I have read all previous threads about duplicate record error while loading master data and most of the them suggested to check 'Ignore duplicate records' option in the infopackage. But in 7.0, I can only load to PSA with infopackage and it doesn't have any option for me to ignore duplicate records.
    My data is getting loaded to PSA fine and I get this error while loading to info object using DTP.
    I would appreciate your help to resolve this issue.
    Regards,
    Ram.

    Hi,
    Refer:
    http://help.sap.com/saphelp_nw2004s/helpdata/en/45/2a8430131e03c3e10000000a1553f6/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/d0/538f3b294a7f2de10000000a11402f/frameset.htm
    With rgds,
    Anil Kumar Sharma .P

  • Strange error while loading master data

    Hi,
      Has anybody seen the following error while loading master data?
    6 duplicate record found. 886 recordings used in table /BI0/XCOSTCENTER
    6 duplicate record found. 886 recordings used in table /BI0/PCOSTCENTER     
    and repeat again once (so total 4 lines of error message)
    The update mode is "PSA and then in the infoobject (Package by Package)"
    Surprisingly the step by step error analysis shows all green except in step "Processing error in Warehouse reported?" which is red.  The over all status i.e. Total and  Technical are both red.
    It all means something went wrong but with the step by step error analysis all green even in the parts like "Processing successfully finished" and "All reported data packet received" I am confused.
    To make matter more confusing there are no error records in corresponding PSA data package.
    any comments would be greatly appreciated.

    Hi Novice,
    In your InfoPackage > Processing tab, select the option Only PSA and Update subsequently into Data Target, and also add the check mark for Ignore double data records. Then try the load again...it should be okay.
    Hope this helps...

  • Issue while loading Master Data through Process Chain in Production

    Hi All,
    We are getting an error in Process chain while loading Master Data
    Non-updated Idocs found in Source System
    Diagnosis
    IDocs were found in the ALE inbox for Source System that are not updated.
    Processing is overdue.
    Error correction:
    Attempt to process the IDocs manually. You can process the IDocs manually using the Wizard or by selecting the IDocs with incorrect status and processing them manually.
    I had checked the PSA also but I could not find any record and the strange thing is, Job itself is not getting scheduled. Can any one help me out in order to resolve this issue.
    Regards
    Bhanumathi

    Hi
    This problem is not related to Process chain..
    u can try this..
    In RSMO, select the particular load you want to monitor.
    In the menu bar, Environment >>> Transact. RFC >>> Select whichever is required, BW or Source System.
    In the next screen you can select the Execute button and the IDOCS will be displayed.
    Check Note 561880 - Requests hang because IDocs are not processed.
    OR
    Transact RFC - status running Yellow for long time (Transact RFC will be enabled in Status tab in RSMO).
    Step 1: Goto Details, Status get the IDoc number,and go to BD87 in R/3,place the cursor in the RED IDoc entroes in tRFC
    queue thats under outbound processing and click on display the IDOC which is on the menu bar.
    Step 2: In the next screen click on Display tRFC calls (will take you to SM58 particular TRFC call)
    place the cursor on the particular Transaction ID and go to EDIT in the menu bar --> press 'Execute LUW'
    (Display tRFC calls (will take you to SM58 particular TRFC call) ---> select the TrasnID ---> EDIT ---> Execute LUW)
    Rather than going to SM58 and executing LUW directly it is safer to go through BD87 giving the IDOC name as it will take you
    to the particular TRFC request for that Idoc.
    OR
    Go into the JOB Overview of the Load there you should be able to find the Data Package ID.
    (For this in RSMO Screen> Environment> there is a option for Job overview.)
    This Data Package TID is Transaction ID in SM58.
    OR
    SM58 > Give * / user name or background (Aleremote) user name and execute.It will show you all the pending TRFC with
    Transaction ID.
    In the Status Text column you can see two status
    Transation Recorded and Transaction Executing
    Don't disturb, if the status is second one Transaction Executing. If the status is first one (Transation Recorded) manually
    execute the "Execute LUWs"
    OR
    Directly go to SM58 > Give * / user name or background (Aleremote) user name and execute. It will show TRFCs to be executed
    for that user. Find the particular TRFC (SM37 > Req name > TID from data packet with sysfail).select the TrasnID (SM58) --->
    EDIT ---> Execute LUW
    (from JituK)
    Hope it helps
    Darshan

  • Error 0 update while loading master data

    Hi,
        Iam facing a problem while loading master data.Data has comes to PSA but it getting failed to load into infoobject it is showing the error " error in the 0 update".
    Ihave tried for manual update, even though it is showing same problem .masterdata 0material is copy back from production to Quality.presently iam uploading data in quality.can anybody give your valuable suggestions.
    Thanks & Regards,
    Mahi.

    I've a compounding characteristic in this characteristic.
    And the master data loading was fine yesterday but today it doesn't work.
    When I check with rsrv this characteristic, a dump with message:
    Error in ABAP application program.
    The current ABAP program "SAPLRRSI" had to be terminated because one of the
    statements could not be executed.
    This is probably due to an error in the ABAP program.
    In program "GP47HH4A9VROVK98YR0TT9S7TQ5 ", the following syntax error occurred
    in the Include "GP47HH4A9VROVK98YR0TT9S7TQ5 " in line 25:
    "Field "/BIC/MZCATWRT" is unknown. It is neither in one of the specifie"
    "d tables nor defined by a "DATA" statement. "DATA" statement."
    So I think something is wrong in this Char.
    But what can I do for that?
    Thanks a lot for all idea.
    Juan

  • Error while loading master data.

    I am facing error while loading master data in a infoobject.
    The error comes when I run DTP fo rloading data from PSA to infoobject.
    The error wordings are : "MCK_PRDT1 : Data record 1 ('Bleach '): Version 'Bleach ' is not valid"
    Please help me in understanding this Version errror and suggest a solution for this.

    SAP metodology integration MDM & BW you can look at:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b0f1f135-0015-2b10-5e83-acca118e17aa
    You can turn matching strategy in MDM Data manager for delete dublicate of records
    and then use MDM Syndicator for export data to file and then load that file to BW
    If you use OHD you cannot load from BW to MDM repository 10 records and unload only 5 because
    in BW every record has unique key.
    also you can use MDM ABAP or Java API for delete dublicate of records
    Edited by: Kanstantsin Chernichenka on May 8, 2009 1:02 PM

  • 36 duplicate record  found. -- error while loading master data

    Hello BW Experts,
    Error while loading master data
    ( green light )Update PSA ( 50000 Records posted ) No errors
    ( green light )Transfer rules ( 50000  „³ 50000 Records ): No errors
    ( green light )Update rules ( 50000 „³ 50000 Records ): No errors
    ( green light ) Update ( 0 new / 50000 changed ): No errors
    ( red light )Processing end: errors occurred
         Processing 2 finished
    ƒÞ     36 duplicate record found. 15718 recordings used in table /BIC/PZMATNUM
    ƒÞ     36 duplicate record found. 15718 recordings used in table /BIC/XZMATNUM
    This error repeats with all the data-packets.
    what could be the reason of the error. how to correct the error.
    Any suggestions appreciated.
    Thanks,
    BWer

    BWer,
    We have exactly the same issue when loading the infoobject 0PM_ORDER, the datasource is 0PM_ORDER_ATTR.
    The workaround we have been using is 'Manual push' from the details tab of the monitor. Weirdly we don't have this issue in our test and dev systems, even in Production, this doesn't occur somedays. We have all the necessary settings enabled in the infopackage.
    Did you figure out a solution for your issue, if so please let me know and likewise I will.
    -Venkat

  • Error Caller 70" is missing while loading master data

    Hi All,
    I am facing a Problem while loading master data getting error like "Error Caller 70" is missing" ,there are 4 data packages and in that except one all other with status green .1  data pakage is showing with red color, its update till only PSA .
    Please help me out to solving this issue .
    Thanks in Advance
    Sandhya

    Hi,
    check the below links
    caller 70
    Re: Caller 70 error
    caller 70
    Hope this helps

  • While loading master data to infoobject Load failed due to Duplicate record

    Hi Experts,
    While loading master data to the infoobject load failed .
    The error it is showing is 24 Duplicate record found. 23 recordings used in table.
    Pls help me to solve this issue
    Thanks in Advance.
    Regards,
    Gopal.

    In infopackage settings u will find a checkbox for 'delete duplicate records'.
    I think it appears beside the radio button for 'To PSA',and also tick checkbox for 'subsequent update to data targets'.
    This will remove the duplicate records(if any) from the PSA before they are processed further by transfer and update rules.
    Use this and reload master data.
    cheers,
    Vishvesh

  • Error while loading master data attribute

    Hi Guru's
    I am getting below mention error while loading master  data attribute.
    0MANU_MATNR : Data record 1035 ('000000000000229058 '): Version 'BDM755s ' is not valid
    Please sugggest how to resolve ?
    Regards
    Karan

    Hi,
    I think there is problem with "0MANU_MATNR" Data, check the records 1033 to 1036 and find the differnce between 1035 record and other records, some values is giving problem so by looking at other reocrds i.e 1033,1034,1036. Check in PSA in Monitor. 
    Note: If any problem with Upper/Lowe case then use TOUPPER in Transfer Rules
    If need use Conversion exits in transfer rules.
    ALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
      EXPORTING
        INPUT         = 0MANU_MATNR
    IMPORTING
       OUTPUT        =   Result .
    or
    ALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
      EXPORTING
        INPUT         = 0MANU_MATNR
    IMPORTING
       OUTPUT        =   Result .
    Thanks
    Reddy
    Edited by: Surendra Reddy on Mar 3, 2009 11:46 AM

  • Duplication of records while loading Master Data.

    Hi All,
             I am facing problem while loading master data from 0BPARTNER_ATTR. The infopackage is getting failed showing message "44 duplicate record found. 32 recordings used in table 44 duplicate record found. 32 recordings used in table /BI0/XBPARTNER"
    we can rectify manually but daily the loading is getting failed showing the same message. So Cvan anybody suggest me how to rectify this problem permanently. And Can you  Explain me why the error is?
    If i go to PSA and check i can find only one dulplicate record. I am not able to understand the Error Message.
    With Regards,
    Thilak
    Edited by: thilak. neelam on Mar 10, 2009 1:46 PM
    Edited by: thilak. neelam on Mar 10, 2009 1:47 PM

    Hi,
    there was (is?) a recent problem in the SAP BI 7.0 software, so that duplicates were removed during init load, but not during delta load. Although the DTP could not set currently (also an error that has already a SAP note). We added a manual removal using ABAP code to avoid upgrading to a new SAP version. That helped. The duplicates may also result from two full request that are loaded at the same time.
    Hope this help to analyse the problem in details.
    Regards
    Thomas

Maybe you are looking for

  • I uninstalled the Premiere Pro and my CC app does not recognise it

    I uninstalled the Premiere Pro from my computer and now, when I try to reinstall it my Creative Croud accuses that I still have it on my computer. But I don´t have. What should I do? I tried closing the CC app, I tried unlloging from the CC and it st

  • How to store data in a file without using DB

    Hi all I want to develop a small application that could contain at most 10000 records, so if it is possible I want to store the data in a file, therefore the installation of the application can be simplified and the users don't need to add a ODBC dat

  • Trouble Upgrading CF7 To CF8

    Hello All, We're having trouble trying to upgrade from CF7 to CF8 on a Unix box (Sun). We ran an upgrade installation of CF8 so as to keep our current settings. We gave the installer the same JRun path we used for CF7. But Apache continues to talk to

  • Installing & connecting hp Officejet printer to network and OS X 10.8.2

    Hi Experts, Looking for some advice please. Currently using OS X 10.8.2.  a) my HP Officejet Pro 8500 is connected to my wireless network, yet it is not available when I go to Add Printers on my Mac. b) I no longer have the CD that came with the prin

  • I want to interface s7 1200 plc to LabVIEW 2011

    i am not getting proper bit address in plc, i follow this attachment but i think it is not sufficient to integrate plc with LabVIEW advance thanking you...!!! Attachments: NI-Tutorial-13911-en.pdf ‏536 KB NI-Tutorial-13911-en.pdf ‏536 KB NI-Tutorial-