While playing back a video file the sound goes sort of like an echo and stopping the video and playing back again it sound great, the video is recorded live with an AJA system and plays fine on the units;any clue to what is going

While playing back a video recorded on a AJA system we transfered it to the macbook pro played it with quicktime works great and sometimes it sounds like an echo same file track and it plays fine on the aja system.Tried it on another macbook pro and it did the same issue.Any clue to what is going on.Thank you.

Thank you supermacmom!
I have the LifeProof case for the iPhone5, and I remember the instructions saying that any protective screen cover should be removed before enclosing the phone into the case, but I left mine on with no ill effects.
But I should have taken off the back protective film, which was covering the video mic!

Similar Messages

Hello, I want to play my video files (which are on s3 bucket ) like live . Some buddy please help me

Hello, I want to play my video files (which are on s3 bucket ) like live .i.e.mox.tv i want play videos on my website.Some buddy please help me ..for that what i need to do?
my video are in mp4 formate with h.264 codecs
Message was edited by: lakhanp22

Just as of late I noticed that Apple Stores are selling security cameras that work with their app on an iPhone. Very expensive but it uses both WiFi when local and cellular when not at home.
In your case I would check the apple store and see if there is a free or paid app to access your home closed circuit TV system. The cameras have to have their own ip address so you then need only enter that and access will be available to you. But they must be on your home network.
a lot of the higher end CCTV systems have a free app that can be used like the new Apple Security system.
Just Google it or check the store.
Good Luck

While downloading podcasts to my library, I am getting the message, "the iTunes Library file cannot be saves. An unknown error occured (-54)." Any idea of what is going on?

While downloading podcasts to my library, I am getting the message, "the iTunes Library file cannot be saves. An unknown error occured (-54)." Any idea of what is going on?
Thanks.

The problem went away on its own. Not sure what was the problem but perhaps somehow the system was out sync internally due installing Lion 10.7.3/Snow Leopard 10.6.8/10.7/10.7.3 with iTunes 6 installing after the 10.7.3 and then needing to be installed again after the second 10.7.3 install from the updater model.
I kept accepting the error message and checking iTunes music file. No podcast downloads were actually rejected.

Is there a way to get photos off of a thumb drive onto something that can be uploaded to the ipad. I am doing away with my windows systems and using the ipad exclusively?

is there a way to get photos off of a thumb drive onto something that can be uploaded to the ipad. I am doing away with my windows systems and using the ipad exclusively?

iPad Photo Recovery: How to Recover Deleted Photos
http://www.iskysoft.com/iphone-data-recovery-mac/ipad-photo-recovery.html
How to Restore Lost or Deleted Files from iPad
http://www.iphone-ipad-recovery.com/recover-ipad-mini-files.html
How to Recover Deleted Files from iPad
http://www.kvisoft.com/tutorials/recover-deleted-files-from-ipad.html
How to Recover Photos from iPad
http://www.ipubsoft.com/idevice-tips/recover-deleted-photos-on-ipad-mini.html
iSkysoft Free iPhone Data Recovery
http://www.iskysoft.com/iphone-data-recovery/
Recover iPhone/iPad/iPod touch lost data, Free.
Free recover iPhone/iPad/iPod touch lost contacts, photos, videos, notes, call logs and more
Recover data directly from iPhone or from iTunes backup
Preview and recover lost iOS data with original quality
Wondershare Dr.Fone for iOS
http://www.wondershare.net/data-recovery/iphone-data-recovery.html?gclid=CJT7i9e 6gb4CFcvm7AodbUEAJQ
Recover contacts, messages, photos, videos, notes, call history, calendars, voicemail, voice memos, reminders, bookmarks and other documents.
iPad Data Recovery Software (PC & Mac)
http://www.anysoftwaretools.com/ipad-data-recovery.html
Jihosoft Mobile Recovery for iOS
http://www.fonerecovery.com/iphone-data-recovery.html
 Cheers, Tom

Synthetic FibreChannel Port: Failed to start reserving resources with Error 'Insufficient system resources exist to complete the requested service.' (0x800705AA)

Hello Gurus
i have installed windows server 2012 RTM with Hyper-V. i already created virtual machine with virtual fiber channel adapter connected to physical one. sometimes when i restart the virtual machine it gets failed to start again and the following error appears
in the event viewer of the host:
error id 21502
'Virtual Machine xyz' failed to start.
'xyz' failed to start. (Virtual machine ID number)
'xyz' Synthetic FibreChannel Port: Failed to start reserving resources with Error 'Insufficient system resources exist to complete the requested service.' (0x800705AA). (Virtual machine ID
number)
'xyz': Operation for virtual port (C003FF18F98C000E) failed with an error: No physical port available to satisfy the request (Virtual machine ID
number).
error id 1069
Cluster resource 'Virtual Machine xyz' of type 'Virtual Machine' in clustered role 'xyz' failed. The error code was '0x5aa' ('Insufficient system resources exist to complete the requested service.').
Based on the failure policies for the resource and role, the cluster service may try to bring the resource online on this node or move the group to another node of the cluster and then restart it. Check the resource and group state using Failover Cluster
Manager or the Get-ClusterResource Windows PowerShell cmdlet.
appreciate your help
Ashraf

Dear All,
Subject : Need to create a file cluster
in Guest Vms (Host machine : Windows 2012 R2), using MSA p2000 strorage with HBA Qlogic (HP 8Gb PCIe Host Bus Adapter)
Note: It's a direct connection from HBA to HP MSA p2000 (No SAN switch in between)
Currently I am using Qlogic HBA (HP
81Q 8Gb 1-port PCIe Fibre Channel Host Bus Adapter- Part No. AK344A).
Unable to create vPort using Microsoft
Hyper-V (Win 2012 R2) & secondly using QConverge
Console utility.
When trying to create Microsoft
Hyper-V (Win 2012 R2), I received the below error.
Secondly, when I am trying to create vSAN switch in using Qlogic QConverge Utility the above error is popup.
Currently I am using the following latest version of Qlogic Firmware & Drivers...
HBA - Running Firmware Version: 7.00.02
HBA - Driver Version: STOR Miniport 9.1.11.24
If any body the same issue, Please could you update me as earliest.
Regards,
Mirza

However, we've had issues with other legacy systems and programs for outlook

I have a user who when she logs into her workstation and tries to access her outlook folders she is denied access. If she removes and then adds them back they work. Only one other person on our network had this problem which I initially thought was connectivity
related. I replaced their cat five cable and that seemed to solve their problem. I tried this with this user and it cleared up for about a week but happened again today. Any thoughts or experience with this. Outlook doesnt support archives in a network share
so I cant turn to them. It uses a login batch script to load mapped drives according to department. This all predates me so I did not build them. However, we've had issues with other legacy systems and programs so it is highly possible that this could be an
issue.

Will:Hi! Hi!
I use Firefox and it is now No. 1 on my choice of browsers. I agree it doesn't like the "for IE only" coded sites but then IE is now a non issue as it is dead in the water! So Safari is now really bloated and getting slower by the version. Firefox is quick, good to look at with numerous skins, and what is more has become the browser of choice for web developers on both platforms because it sticks to the WWC3 code. Camino is just another flavour of Netscape which seems to be a bloat AOL IE wannabee product. Do yourself a favour and download Firefox. Give it a few spins around the block and I'm sure you will agree. As for the sites it declines to accept because of bad code, then I would suggest a strong letter of protest to the webmaster! For too long IE has been flouting the rules and trying to be the only game in town. Take some affirmative action and let the webmasters know there are other browsers available to users. If you are still not a believer then check this out:
http://www.pcworld.com/reviews/article/0,aid,118959,00.asp
May the force be with you!

HT3728 since Oct 25 my time capsule is not working properly. I enter the time machine to check my backups and the only thing I see is balck screen on every single day since I put it to work on my house. Any ideas on what's going on?

I am having problems with my time capsule.
It's not backing up... if I enter the time machine, all I see is a black page, any day I look, since the day I bought it.
Was not like this before Oct 25...
Any ideas on what's going on and what should I do to make it work again?

Check the USB cable first to make sure that it is operating correctly on another connection.
You may need to use a powered USB hub with the drive since the USB port on the Time Capsule is not a high powered port like you have on your Mac.
You may need to use the powered hub even if the hard drive has its own external power supply.

OK FIREFOX WILL NOT LET ME DO ANY THING I LOG INTO MY MAIL N I CAN NOT OPEN IT,DELETE ANY OF IT, I CAN NOT PLAY ANY GAMES NOTHING WHAT IS GOING ON

OK FIREFOX WILL NOT LET ME DO ANY THING I LOG INTO MY MAIL N I CAN NOT OPEN IT,DELETE ANY OF IT, I CAN NOT PLAY ANY GAMES NOTHING WHAT IS GOING ON

See these: http://malwaretips.com/blogs/remarkit-virus-removal/
https://www.youtube.com/watch?v=w36xK_4PiO8

HT201299 After installing an app on iPhone 5s, I can't use it outside of wifi (using cellular or mobile data) and the app is not listed in settings to enable its use of mobile data - any clues on what is wrong here?

After installing an app on iPhone 5s, I can't use it outside of wifi (using cellular or mobile data) and the app is not listed in settings to enable its use of mobile data - any clues on what is wrong here?

Steps to take to resolve this issue:
1/ Turn off Wifi
2/ Ensure Mobile (cellular) data is on
3/ Turn iPhone OFF and then ON (re-boot iPhone)
4/ Without turning Wifi on, open an app that requires mobile (cellular) data.
5/ The app will now show on the Settings list with the option to enable or disable mobile (cellular) data
6/ In time all apps that require or use mobile data will be added to the list automatically.

I have an apple trackpad that shows that it is connected to Bluetooth but it does not respond. I have tried restarting the computer and turning the trackpad off and on but it will not work. Anyone have any ideas on what is going on here?

I have an Apple Trackpad that shows that it is connected with Bluetooth but it is not responding. I've tried restarting the computer, disconnecting and reconnecting and also turning the trackpad on and off but it simply does not respond. Does anyone have any idea on what is going on here?

There are reports of similar behavour but generally it is due to battery connections. Is the indicator light working steadily or does it blink or even not function. Here is the Apple document dealing with some of the problems.
http://manuals.info.apple.com/MANUALS/1000/MA1544/en_US/Magic_Trackpad_UG.pdf
Is your machine within the guarantee period or under Apple care. If so, return it to any apple retailer for examination and possible replacement.

After installing Leopard, my G4 will no longer boot in OS 9.22. (Classic still works, but I need it to boot in OS 9.) Any clues about what the Leopard installer might have done to my machine that rendered OS 9 boot unusable? What can I do to fix it?

After installing Leopard, my G4 will no longer boot in OS 9.22.
(Classic still works, but I need it to boot in OS 9.)
Any clues about what the Leopard installer might have done to my machine that rendered OS 9 boot unusable? (And what can I do to fix it?)
Details:
G4 Gigabit Ethernet
Boot ROM version: 4.2.8fl
Accelerator card added: 1.6 MHz
1.5 Gig Ram
I have erased the partition that had Leopard installed on it.
I zapped the pram.
In Open Firmware, I "reset-nvram", and then "reset-all"
I tried to reinstall G4 FW Update 4.2.8, but that must be done when booted from OS 9, and of course, that's the problem: it won't boot into 9.
I tried restarting from 9.2.1 DVD.
I tried restarting from an external firewire drive containing OS 9.2.2.
I tried moving a fresh OS 9.2.2 system folder into an empty partition on an internal hard drive. (Partition was created WITH OS 9 drivers installed.)
All attempts to boot into OS 9 give me the same results - grey screen - no spinning beach ball, no icons or logos - just a blank grey screen.
This machine still works fine in OS 10.3 and 10.4, and it worked fine for many years booting into OS 9, until I installed Leopard, and I haven't been able to boot into OS 9 since then, although I have done considerable research online and tried many things.
I have since learned that this machine does not support Leopard - 10.5. Fine, but how did it break 9.2.2?
Any help greatly appreciated.

Thanks for checking in, BDAQua.
Problem solved.
In the docs that came with my Powerlogix accelerator card, I found this sentence buried:
"If you reset the PRAM, the NVRAM code for OS9 compatibility is cleared, so you will have to boot from the Firmawre Update CD and perform this process again in order to boot in OS9."
The "process" it's referring to is the process of setting up the NVRAM for booting into OS9 from the CD.
Fortunately, I was able to find the disk, and it worked as expected. I can now, once again boot into OS9.
Conclusion: My (unadvised) attempt to load Leopard on this old machine apparently reset the PRAM on the accelerator card and cleared the NVRAM code for OS9 boot. Although I did attempt to reset the NVRAM via Open Firmware, it did not reset it on the accelerator card.
So, thank you BDAQua, for your "Ah yes" . . . that's all I needed to steer me in the right direction.
Gratefully,
tupester

HT1386 Sry for disturbing, but i would to ask that how to overcome the problem of synchronising ? Itune showing me that the sync session is failed to start with my Ipad mini. Any ideas about what is going on ?

Sry for disturbing, but i would to ask that how to overcome the problem of synchronising ? Itune showing me that the sync session is failed to start with my Ipad mini. Any ideas about what is going on ?

What are you trying to sync?
I see you are on ios 7.
I also had upgraded my iPad Mini to ios 7 & then the 1st time I tried to open a Numbers file that was set up to sync w my MacBookPro, I got a warning that I would not be able to sync it any more w my Mac until I upgraded to Mavericks.
So if you are trying to sync Numbers, Pages or Keynote files between your iPad mini in ios 7 and a Mac that hasn't been upgraded to Mavericks that could be the problem.
I was very shocked to get that message since I bought Numbers on the iPad so that I could have a particular file on both devices & keep them synced. I had no clue when I upgraded to ios 7 on the iPad Mini that it would make it so the files in the iWorks apps woudln't sync any more.
So I finally decided to go ahead & upgrade to Mavericks after carefully preparing & updating other software so that it would work w Mavericks. But I got error messages so haven't even been able to download Mavericks & now having 2nd thoughts about doing so.
iPad mini ios 7
MacBookPro Mid 2012 Mountain Lion
iphone 4S ios 6

My mac book pro freezes up at start up,it's doing it I would say 80% of the time.any help on what's going on?

My mac book pro freezes up at start up,it's doing it I would say 80% of the time.any help on what's going on?

Please verify you got this screen as well:
I had the same after updating fronm 10.7.1 to 10.7.2 tonight. Not even a re-install of the OS X 10.7 and Combo update to 10.7.2 helped. I think this time Apple messed up big time with the 10.7.2 update and some Mac Books (my case: MacBook 15" Mid 2009 = MacBookPro5,3)
If any Apple Support person reads this: Please get in contact with me. This is highly unusual!!

I have had my iphone 4 for less than 3 months and i always have it in a protective case, recently my bluetooth that i use daily will not stay connected, my alarm clock will not ring, any suggestions on whats going on??

i have had my iphone 4s for less than 3 months and i always have it in a protective case, recently my bluetooth that i use daily will not stay connected, my alarm clock will not ring, any suggestions on whats going on??

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

Strange pops when pressing play and stop. Logic 9.1.3, Mac internal Sound

Hi,
So I opened Logic for the first time in a while.
Logic Pro Version 9.1.3 (1697.87) 32bit.
Mac 2 x 2.8GHz Quad-Core Intel Xeon
Mac OS 10.6.5
6GB RAM
I am using the internal Mac sound card, set up as follows :
Core Audio
Built In Line Output
IO Buffer Size 512
I am running ONE Mono audio track, with one Space Designer plug-In (mono>Stereo) inserted on the first insert slot.
There is nothing else playing back on this particular logic song.
Every time I press the spacebar for play or stop, I get a tiny delay, a pop, and then is starts, or it stops playing.
This is using the Macs' own internal sound card. With Logic's own Space Deigner, on ONE mono audio track.
SO, any ideas as to why this happens?
The only reason I opened Logic, was because I wanted to show a producer friend of mine some personal Space Designer presets I had made a couple of years ago, in case that was the type of ambience he is interested in using for a mix.
My plan was to use Logic as an effects suite, using a Motu 828mk3 conected via ADAT Lightpipe to my Pro Tools HD converter, to send and recieve 4 stereo sends and returns with 4 instances of Space Designer.
But, if Logic hiccups with the internal sound card... what will happen when I use the Motu? I dread to think about it, but will test it tomorrow.
At least I have two weeks to get this working or re-do my convolution reverbs in another plug-in (Waves IR1) that I can use in Pro Tools, in case Logic just does not work out.

The multi-purpose internal audio chips used in Mac's & PC's has some built in latency and seemes to default to a basic 16-bit 48kHz format. Any change from this and the chip has to change on the fly, I knew sample rate did this, makes sense bit depth might as well.
Some internal chips have a built in noise gate which can also cause a "thump". (rare)
Cheap or out-of-spec audio chips with a high DC offset will cause a pop when pressing "Play" and "Stop", as will an audio file that has a high DC offset.
pancenter-

While playing back a video file the sound goes sort of like an echo and stopping the video and playing back again it sound great, the video is recorded live with an AJA system and plays fine on the units;any clue to what is going

Similar Messages

Maybe you are looking for