While preparing an AUDIT - (Data changes report) faces an 'Server error' message

Hi BPC Experts,
While preparing an AUDIT report- (Data changes report) faces an 'Server error' message.
But regular users are able to input their data in EPM.
What could be the reason for this message?
Regards,
Rajesh.

Hi Chuan,
Attached the Error message here. We use BPC NW10
Rajesh.

Similar Messages

  • SAP Note for XD99 : Data changed but Output screen show error message

    This is regarding the XD99.. Mass data update.
    I am looking for SAP Note to fix it. Here data is changed KNA1-Name1 but output shows the Error message..
    Is there any Sap Note for this.
    Edited by: Mukesh Mahajan on Dec 9, 2010 2:45 PM
    Edited by: Mukesh Mahajan on Dec 9, 2010 2:47 PM
    Moderator message: please have a look in the Service Marketplace yourself.
    Edited by: Thomas Zloch on Dec 9, 2010 2:58 PM

    Hi there, gwinslo. You have come to the right place.
    From what I have been reading from other posts on this forum, the issue may
    be caused by the clear history settings.
    Press the '''<Alt>''' or '''<F10>''' key to bring up the tool bar. Then '''Tools > Options > Privacy'''.
    The button next to '''History''', select '''Use Custom Settings'''.
    At the bottom of the page, turn on '''Clear History When Firefox Closes.'''
    At the far right, press the '''Settings''' button. Turn on ONLY '''Cache''' and
    '''Form And Search History''' leaving the others off.
    '''https://support.mozilla.org/questions/997866?esab=a&s=&r=1&as=s''' {web link}
    This is not a cure but will make it easier if Firefox locks up.

  • Face time server error message

    facetime won't allow login and says server encountered error

    These questions are asked long back by I pad users ,but this i pad support team is not giving proper answer to me ,they r cheater ,just they r sending me to community  and find the answer yourself. They r playing with the customers,by not giving
    any proper solution to the customer,  that's all,

  • I tried to install up date 3.6.13 and received error message that I didn't have the right permissions on this mac book , but I am the administrator on my Mac Book Air? Any ideas how to resolve this?

    I tried to install up date 3.6.13 and received error message that I didn't have the system permissions required to install it. I am the administrator on my Mac Book Air? Any ideas how to resolve this?

    * Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
    * Trash the current Firefox application to do a clean (re)install.
    * Install the new version that you have downloaded.
    Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

  • Options for auditing data changes

    Hi Friends,
    I thought I will get some inputs on my following implementation. The requirement is to audit some data changes with in the system.( Oracle 10.2 on RHEL 4.7 )
    The audit is required in a sense that, the before images of data and information of who changed the data is required. I have looked at options like Oracle Auditing,FGA and so. But this cannot give me audit for the data changes,when and who changed.
    The first thing that comes into my mind are using triggers . Another option is using log miner. I have successfully tested it out with both of these approaches. The environment is like
    1 ) For some critical tables for which audit is required triggers were written ( ours is an OLTP application )
    2 ) For some non critical tables, log miner which was called by a stored procedure which runs at certain periods is used.
    3 ) audit data is stored in a different schema , with same table names as in base schema.
    I would like to know your thoughts on this.
    Thank You,
    SSN

    The delay with log miner is acceptable with some less critical audit tables and as you said, tirggers can be implemented for some critical tables.
    One bottleneck with using logminer is that it depends on the availability of archived redo logs, the backup mechanism if any implemented should make sure that, no archive logs are removed from the locations specified for the audit program. The backup mechanism should ensure that all archived logs are processed by periodically running audit program which uses log miner.
    Wondering if there is any other recommended approach for this.
    Thanks
    SSN

  • Masterdata infobject data changes report

    Hi all,
    i have a query regarding Infobject Data changes to be tracked through Technical content cubes.
    we have many TC cubes in BI were we can track Infobjects last changes and so on .
    Now req is that when anyone changes the Infobject Data it should be tracked in .
    bec we dont have an standard Technical content Infobject(whcih tracks data chnges of Infobject) to include in the TC cubes .
    So can u suggest me in this issue .
    Thanks
    Venkat

    Hi Chuan,
    Attached the Error message here. We use BPC NW10
    Rajesh.

  • Crystal Reports XI  stopped working error message on a Windows Server 2008

    We recently installed Crystal Report XI  in a Windows Server 2008 environment. After completed the installation as the Administrator every time that we try to execute Crystal we receive the following error message:
    "Crystal Reports has stopped working"
    Problem signature:
    Problem Event Name: BEX
    Application Name: crw32.exe
    Application Version: 11.0.0.1282
    Application Timestamp: 422d5c77
    Fault Module Name: StackHash_1fc1
    Fault Module Version: 0.0.0.0
    Fault Module Timestamp: 00000000
    Exception Offset: 7ef2fbfc
    Exception Code: c0000005
    Exception Data: 00000008
    OS Version: 6.1.7600.2.0.0.272.7
    Locale ID: 1033
    Additional Information 1: 1fc1
    Additional Information 2: 1fc163a1c57ae45571bce37d539b233f
    Additional Information 3: 2f92
    Additional Information 4: 2f92817e9e63d4100e2aa48e72910a78
    Any recommendation on what is causing this error?
    Thanks,
    Luis

    Hi, did you get this working? I'm really struggling to get up and running on 2008 R2, the CMS service just refuses to connect to the database. It also looks like the database wasn't created properly during the install. I set it up on an MSDE database, and when I look at it with sql management studio the database is there but there aren't any tables or anything else
    Can anyone either confirm or deny that its possible to run Crystal XI on 2008 R2?
    The error I'm getting when trying to start the service is:
    The root server reported an error Initialization Failure. (Reason: Unable to connect to the database using the provided connection string. Reason: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified).
    I've confirmed that the ODBC connections work (both 32 bit and 64 bit) via the built in test, but Crystal for some reason isn't happy

  • Fiscal Year Change in MM failing with error message

    Hi I am with a company that is using SAP R/3 ECC6 Modules SD MM FI CO with COPA (costing based) for reporting. Our fiscal year runs 1 August to 31 July. I am a FICO support analyst, currently also filling in for SDMM until we complete recruitment of a new person in that post.
    In MM when trying to open the new period/close the old, we are getting the error message 'The specified year 2009 is not the current calendar year.' the detailed log says 'incorrect period in control record of CoCo. The current period (month/year is 112008)
    I have:
    1) Maintained our FYV in the IMG and it is set to year independent (tried making it year dependent but that didn't solve the problem)
    2)Set the apppropriate periods with correct year shift and texts
    3) Assigned the CoCode to the FYV
    4) Checked that the proper variant for posting periods are set.
    5) Set the Global parameters for the CoCode
    Financial postings work fine and there seems to be no problem with the FYV there, and everything worked Ok last year (our first with SAP since Go Live).
    I have searched the relevant sections in my SAP Press config manuals for FI and MM and done a search on Google but there must be something I am missing.
    Can anyone suggest a solution, please.
    Thanks in advance
    David

    Thanks anyway, Vijay, but OB52 is for changing Fiscal periods. That table is set correctly, the financial postings wouldn't be working if it wasn't.
    I hadn't checked OMSY, Syed, thank you for that suggestion. There are no entries in any of the fields for Year or FYr.  I am willing to make entries here to try it if there is a good reason but why would it have worked all through FY2008 without any entry in these fields but fail now in the new FY? The period change worked without problem for the past 12 months, isn't this the same as most SAP fields i.e. if you enter nothing then it is open for everything, in this case all years?
    I am using MMPV to try to open the new period but it is there that I am getting the error messages.
    Edited by: David Crossley on Aug 11, 2008 1:00 PM

  • Changing "server error"  message name

    Hello,
    when I call a soap request and there is a mapping failiure or some invalid data entered by the user, the user gets a response back as "server error".
    Can this "server error" be changed to something else and I can tell him "incorrect mapping/insufficient data" somehting like this?
    I aint aware of anything like this can be done but wud b interested in knowing.
    thanks,
    Vishal

    Ravi,
    it is when a legacy invokes my webservice..
    so soap to...????
    When there is an invoke and mapping failure/data items missing...
    Server error is sent back to legacy system...
    thanks,
    Vishal

  • GR date lesser than the PO date, the system should show an error message.

    Dear Gurus,
                         if anybody puts GR date lesser than the PO date, system should display error this happens because the system allows back dated posting of 101 MVT in MIGO.Similarly the IR date should not be less than the GR date. This happens because the system allows back dated posting of MIRO also.
    Regards
    ASHOK K

    Hi,
    Use the badi MB_DOCUMENT_BADI  and compare dates of EKKO-BEDAT and MKPF-BLDAT for MIGO.
    USe the badi IF_EX_MRM_INVOICE_UPDATE PROCESS_AT_ and compare the dates of MKPF-BLDAT and RBKP-BLDAT while saving the invoice for checking the back dated entries and throw an error message.
    Regards,
    Bharat

  • Changing System warnig msg to Error Message

    Hi,
    how to change ME393 " No shipping data could be found for item & "  system message from 'W'  warning to 'E'   error.
    i have checked using OLME,OMT4 tcode but not finding this message number.
    also i checked SPRO IMG.
    but could not found it ?
    what is right way to Find  ME 393 system message
    This message is in ME21N.

    FOLLOW THIS :
    SPRO>SAP REFERENCE IMG>MATERIAL MANAGEMENT>PURCHASING>Environment data-->SYSTEM MESSAGE
    Change the message type.
    Hope this resolves the issue.
    SPRO>SAP REFERENCE IMG>MATERIAL MANAGEMENT>PURCHASING>MESSAGE.
    Check under this catagory also.
    Regards,
    Gurpreet
    Edited by: Gurpreet Singh on Feb 19, 2009 2:34 PM

  • Change the calendar control's error message

    I have a number of calendar controls which are used to pick dates, however they all have the ability to key the date in and if you enter an invalid format for the date value, they raise the "Conversion Error Occurred" error which displays on screen in the message box.
    I want to replace this error with something more user friendly. I have tried adding messages to a bundle and defining the bundle in the app config, but it does not seem to work.
    Anyone got any ideas how to do this?
    ta
    b

    hi juergen
    i had a look at that but the "conversion error occurred" message for the calendar does not seem to be defined in the themes
    i think it is actually a jsp validation message, but i can't figure out how to make it change
    i will keep looking i suppose
    b

  • Bw report to show all error message from an infopackage

    Dears Experts,
    I am looking for a way to analyze within a BW reports (a specific one or already existing in a BI content) all errors messages generated by an infopackage and stored within the status field of a PSA. Does someone have any feedbacks or ideas on that?
    Thanks in advance,
    LL

    Thanks Sam,
    And how to retrieved detailled message regarding each wrong status?
    LL

  • While partitioning in Lion 10.8, I get the following error message: I have been attempting to partition a 2 GB hard drive that I just formatted using the Disk Utilty in Mountain Lion (10.8) and get the following error message:  DiskManagementTool has died

    I have been attempting to partition a 2 GB hard drive that I just formatted using the Disk Utilty in Mountain Lion (10.8) and get the following error message:
    DiskManagementTool has died. Disk Utility will need to be restarted.  The log shows the following:
    2012-09-10 11:20:51 -0700: Preparing to partition disk: “HitachiG ST Media”
    2012-09-10 11:20:51 -0700:      Partition Scheme: GUID Partition Table
    2012-09-10 11:20:51 -0700:      2 partitions will be created
    2012-09-10 11:20:51 -0700:
    2012-09-10 11:20:51 -0700:      Partition 1
    2012-09-10 11:20:51 -0700:           Name          : “Alex's External Storage”
    2012-09-10 11:20:51 -0700:           Size          : 1.5 TB
    2012-09-10 11:20:51 -0700:           File system     : Mac OS Extended (Journaled)
    2012-09-10 11:20:51 -0700:           Do not erase contents
    2012-09-10 11:20:51 -0700:
    2012-09-10 11:20:51 -0700:      Partition 2
    2012-09-10 11:20:51 -0700:           Name          : “Alex's External Storage 2”
    2012-09-10 11:20:51 -0700:           Size          : 500.05 GB
    2012-09-10 11:20:51 -0700:           File system     : Mac OS Extended (Journaled)
    2012-09-10 11:20:51 -0700:
    2012-09-10 11:20:51 -0700: Beginning partition operations
    2012-09-10 11:20:51 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
    2012-09-10 11:20:52 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
    2012-09-10 11:20:52 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
    2012-09-10 11:20:52 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
    2012-09-10 11:20:55 -0700: Disk Utility started.
    Does anyone have any thoughts?  Cant find anything on the web with this

    I have been attempting to partition a 2 GB hard drive that I just formatted using the Disk Utilty in Mountain Lion (10.8) and get the following error message:
    DiskManagementTool has died. Disk Utility will need to be restarted.  The log shows the following:
    2012-09-10 11:20:51 -0700: Preparing to partition disk: “HitachiG ST Media”
    2012-09-10 11:20:51 -0700:      Partition Scheme: GUID Partition Table
    2012-09-10 11:20:51 -0700:      2 partitions will be created
    2012-09-10 11:20:51 -0700:
    2012-09-10 11:20:51 -0700:      Partition 1
    2012-09-10 11:20:51 -0700:           Name          : “Alex's External Storage”
    2012-09-10 11:20:51 -0700:           Size          : 1.5 TB
    2012-09-10 11:20:51 -0700:           File system     : Mac OS Extended (Journaled)
    2012-09-10 11:20:51 -0700:           Do not erase contents
    2012-09-10 11:20:51 -0700:
    2012-09-10 11:20:51 -0700:      Partition 2
    2012-09-10 11:20:51 -0700:           Name          : “Alex's External Storage 2”
    2012-09-10 11:20:51 -0700:           Size          : 500.05 GB
    2012-09-10 11:20:51 -0700:           File system     : Mac OS Extended (Journaled)
    2012-09-10 11:20:51 -0700:
    2012-09-10 11:20:51 -0700: Beginning partition operations
    2012-09-10 11:20:51 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
    2012-09-10 11:20:52 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
    2012-09-10 11:20:52 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
    2012-09-10 11:20:52 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
    2012-09-10 11:20:55 -0700: Disk Utility started.
    Does anyone have any thoughts?  Cant find anything on the web with this

  • SAP PM : Unprocessed future change recs for order number : Error Message 688

    Dear Experts
    I received the following message when trying to close a PM order.
    Unprocessed future change recs for order number  prevent del. flag/c -  Error Message 688
    Kindly advise on the steps to be taken to resolve the above error.
    Thanking you in advance for your assistance.
    Regards
    Barry

    Hi Barry,
    Please find below thread for your reference.
    Error message when business completion of a production maintenance order
    Unprocessed future change recs for order prevent del. flag/completion
    Regards
    Terence

Maybe you are looking for