While specifying file in LSMW it is giving an error while saving 'No logica

while specifying file in LSMW it is giving an error while saving 'No logical path has been specified'.why it is coming like that?

Hi Shree,
This error looks like that you have attached the activity to the work center and there is no rate  has been maintained in KP26. Please maintain the activity ...for1000/300008/LABORP
for the period and try to repeat the costing run.
I hope this clarifies...
Regards
Rajesh A

Similar Messages

  • Error in LSMW while specifying file for Material Cassification and Info Rec

    Hi Friends,
    I'm getting an error in LSMW while specifying file for Material Cassification and Info Record using batch input method.
    The error message i'm getting is:
    "Length of physical file name 'R2R_33_PURCH_INFR_1_PIR_CREATE.lsmw.conv' cannot be longer than 30 characters
    Message no. /SAPDMC/LSMW_OBJ_060049"
    I tried changing the file name but that is not working out. Please help.
    Thanks,
    Amit

    Hi,
    Just try this,
    Go to LSMW, Specify file option, use display/change (Ctrl+F1)
    Select the converted data and double click, change the file name there,
    You will be getting it as "'R2R_33_PURCH_INFR_1_PIR_CREATE"
    Just trim this to "'R2R_33_PUR_INF_1_PIR_CRE"  and try...
    Regards
    Merwyn

  • Specify files in LSMW

    Dear consultant
    This given below error come in 7th stap(Specify files) in LSMW, please guide me how to do it
    File Name 'Converted Data': Max. 45 Characters. Remaining data saved.
    Message no. /SAPDMC/LSMW_OBJ_060028
    Diagnosis
    Some import interfaces only accept file names (including path) that have a maximum of 45 characters.
    System Response
    All data except the file name of the converted data is saved.
    Procedure
    Adjust the file name for the converted data.
    Regards
    Mahesh

    In specify file - > converted data the file name is formed using the PROJECT , SUBPROJECT NAME AND OBJECT NAME so the after concatenating it is going more than 45 char . so in specifyfile->converted data  , reduce the file name ( by remove the some initial charaters ) to name less the 45 characters. this will slove u r issue.

  • Upgrading to osx 10.6.8 fails. I see errors in the /var/log/install.log of "An unexpected error occurred while moving files to the final destination." Underlying Error=(Error Domain=NSPOSIXErrorDomain Code=5 "The operation couldn't be completed. Input/out

    upgrading to osx 10.6.8 fails. I see errors in the /var/log/install.log of "An unexpected error occurred while moving files to the final destination." Underlying Error=(Error Domain=NSPOSIXErrorDomain Code=5 "The operation couldn’t be completed. Input/out. Any thoughts on what is causing these errors and the upgrade failure?
    Thanks

    I have no idea what the specific error code means but input/output errors can sometimes mean a disk is failing. Make a couple of backups of all important data before doing anything else.
    Verify your startup disk using the First Aid tab in Disk Utility. If the disk needs repair boot from your Leopard DVD and repair your disk from Disk Utility under Utilities on the screen after you choose your language. Repeat the repair process until Disk Utility reports all is well.
    If Disk Utility doesn't find any errors you might want to try a new download of the update and keep a sharp eye on your HD for anything else that might indicate all is not well. Take special care to back up important data.
    If Disk Utility finds errors it would probably be a good idea to pay a visit to the Apple Store to have them check out your hard drive even if Disk Utility is able to repair the errors.

  • File Adapter giving Translation error while reading & moving pdf files

    Hello Gurus,
    I am on SOA 10.1.3.4 and using BPEL for the below procedure.
    The requirement I have is to move pdf files from one local directory to another as soon as the pdf files land in source directory. So I used a file adapter (FileAdapter_1) to poll the file and read as an opaque schema. Then I copied the name and directory in a header variable and passed the header variable to another file adapter(FileAdapter_2) which moves the file from source to target directory. The jca operation for FileAdapter_2 is as follows:
    <jca:operation
    InteractionSpec="oracle.tip.adapter.file.outbound.FileIoInteractionSpec"
    SourcePhysicalDirectory="foo1"
    SourceFileName="bar1"
    TargetPhysicalDirectory="foo2"
    TargetFileName="bar2"
    Type="MOVE">
    </jca:operation>
    It is working fine for all 90% of pdf files, but some files are failing with the following error in domain.log file.
    2012-02-24 11:15:12,170> <DEBUG> <custst1.collaxa.cube.translation> <TranslatorFactory::log> Inside TranslatorFactory
    <2012-02-24 11:15:12,170> <DEBUG> <custst1.collaxa.cube.translation> <TranslatorFactory::log> using version attribute = NXSD
    <2012-02-24 11:15:12,170> <DEBUG> <custst1.collaxa.cube.translation> <TranslatorFactory::log> loading xlator class...oracle.tip.pc.services.translation.xlators.nxsd.NXSDTranslatorImpl
    <2012-02-24 11:15:12,174> <DEBUG> <custst1.collaxa.cube.translation> <TranslatorFactory::log> class loaded
    <2012-02-24 11:15:12,174> <DEBUG> <custst1.collaxa.cube.translation> <NXSDTranslatorImpl::log> Starting translateFromNative using InputStream
    <2012-02-24 11:15:12,174> <DEBUG> <custst1.collaxa.cube.translation> <XlatorHelper::logDebug> validating payload size
    <2012-02-24 11:15:12,175> <INFO> <custst1.collaxa.cube.activation> <File Adapter::Inbound> Error while translating inbound file : Sample.pdf
    <2012-02-24 11:15:12,175> <INFO> <custst1.collaxa.cube.activation> <File Adapter::Inbound>
    ORABPEL-11104
    Error while translating.
    [Line=1, Col=5] The value "%PDF" read from the native data, from the specified position, using "choiceCondition" as "fixedLength" and "length" as "4", doesnt match any of the "conditionValue" on the particles of choice model group.
    Check the error stack and fix the cause of the error. Contact oracle support if error is not fixable.
    at oracle.tip.pc.services.translation.xlators.nxsd.NXSDTranslatorImpl.parseNXSD(NXSDTranslatorImpl.java:1312)
    at oracle.tip.pc.services.translation.xlators.nxsd.NXSDTranslatorImpl.parseNXSD(NXSDTranslatorImpl.java:1142)
    at oracle.tip.pc.services.translation.xlators.nxsd.NXSDTranslatorImpl.doTranslateFromNative(NXSDTranslatorImpl.java:748)
    at oracle.tip.pc.services.translation.xlators.nxsd.NXSDTranslatorImpl.translateFromNative(NXSDTranslatorImpl.java:509)
    at oracle.tip.adapter.file.inbound.ProcessWork.doTranslation(ProcessWork.java:846)
    at oracle.tip.adapter.file.inbound.ProcessWork.processMessages(ProcessWork.java:380)
    at oracle.tip.adapter.file.inbound.ProcessWork.run(ProcessWork.java:231)
    at oracle.tip.adapter.fw.jca.work.WorkerJob.go(WorkerJob.java:51)
    at oracle.tip.adapter.fw.common.ThreadPool.run(ThreadPool.java:280)
    at java.lang.Thread.run(Thread.java:595)
    <2012-02-24 11:15:12,175> <INFO> <custst1.collaxa.cube.activation> <File Adapter::Inbound> Since a translation exception was thrown, this indicates that it is a non-debatching scenario.
    <2012-02-24 11:15:12,175> <INFO> <custst1.collaxa.cube.activation> <File Adapter::Inbound> Failed to translate file : {common/InboundFiles/Sample.pdf}
    Thanks in advance for your help.......

    As stated in my Original Post, I am using opaque schema for both the adapters, still not sure why the adapter is going through native translation.

  • Firefox crashes whenever i want to install any addon or download any file. Some times i am receiving error while downloading any file like "could not be saved, because you cannot change the contents of that folder"

    I am the user of latest firefox 3.6.6 browser. I am getting problems of frequent crashes whenever i tries to install any addon. The crashes also occures whenever i want to download any file.
    I am also receiving errors while downloading any file like:
    "C:\Users\****\AppData\Local\Temp\******.001.part could not be saved, because you cannot change the contents of that folder.
    Change the folder properties and try again, or try saving in a different location. I already changed it many many times but still the same problem."
    Adobe flash palyer is also giving problems of not responding. I am using updated version of it already. Java is also updated.
    I already uninstalled firefox compeletly and re installed it many many times but still the same problem. I also scanned my computer with avira and malware bytes' Anti malware and got no dection. Please ractify this problem ASAP lest my profession will suffer.
    == Crash ID(s) ==
    b7f518f2-8d86-41ca-8bab-aee632100709; 1d790e10-d8eb-4904-98c9-94bc62100708; f042d319-b9f8-42ed-a8cb-57c7d2100708

    Please help.
    It is getting worse
    Adobe flash player is crashing. I already uninstalled and re installed the latest ver. Also it is hanging randomly.
    Please help.

  • R12 installation giving me error [while loading shared libraries: librt.so]

    Hello ..
    I am installing Fresh R12 installation on Fedora. I was doing Single node installation. Installation was going fine but at the point when it said run "autoconfig.sh" for APPS_TIER. I went to $INST_TOP/admin/scripts and ran "autoconfig.sh". After that installer showed me all the errors and when i try to see the log file.
    I am getting following errors.
    [oracle@aurie / ]$ ls
    ls: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
    [oracle@aurie / ]$ su - root
    su: error while loading shared libraries: libcrypt.so.1: cannot open shared object file: No such file or directory
    Now, I cant do anything on this machine, I try rebooting it but no matter what command i try to run i am getting above error.
    Cant find any solution online.
    any help would be appreciated.
    Thanks

    Hello Hussein,
    I chnaged my Fedora to following ..
    [root@aurie /]# cat /etc/issue
    Red Hat Enterprise Linux Server release 5 (Tikanga)
    Kernel \r on an \m
    [root@aurie /]# cat /proc/version
    Linux version 2.6.18-8.el5 ([email protected]) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-52)) #1 SMP Fri Jan 26 14:15:21 EST 2007
    But installer is failing at the end of DB installation and it is not able to create database
    ==== ApplyDatabase_05092341.log ===========
    Executable : /d01/oracle/VIS/db/tech_st/11.1.0/bin/sqlplus
    The log information will be written to
    /d01/oracle/VIS/db/tech_st/11.1.0/appsutil/log/VIS_aurie/adcrdb_VIS.txt
    Creating the control file for VIS_aurie database ...
    exit_code=127
    Checking for errors ...
    .end std out.
    ***sqlplus: error while loading shared libraries: libclntsh.so.11.1: cannot open shared object file: No such file or directory***
    ***egrep: /d01/oracle/VIS/db/tech_st/11.1.0/appsutil/log/VIS_aurie/adcrdb_VIS.txt: No such file or directory***
    **.end err out.**
    -------------------ADX Database Utility Finished---------------
    RC-00118: Error occurred during creation of database
    Raised by oracle.apps.ad.clone.ApplyDatabase
    =============
    ============05092156.log============
    Processing Disk68....
    ^M
    runProcess_2
    Statusstring Registering Database
    Executing command: /R12_setup/startCD/Disk1/rapidwiz/jre/Linux/1.6.0//bin/java -DCONTEXT_VALIDATED=true -mx512M -classpath /R12_setup/startCD/Disk1/rapidwiz/jlib/java:/R12_setup/startCD/Disk1/rapidwiz/jlib/xmlparserv2.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/ojdbc14.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/oui/OraInstaller.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/oui/ewt3.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/oui/share.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/oui/srvm.jar oracle.apps.ad.clone.ApplyDatabase -e /d01/oracle/VIS/db/tech_st/11.1.0/appsutil/VIS_aurie.xml -stage /R12_setup/startCD/Disk1/rapidwiz -showProgress -phase reg -nopromptmsg
    Log file located at /d01/oracle/VIS/db/tech_st/11.1.0/appsutil/log/VIS_aurie/ApplyDatabase_05092341.log
    ^M
    | 0% completed
    runProcess_3
    Statusstring Configuring Database
    Executing command: /R12_setup/startCD/Disk1/rapidwiz/jre/Linux/1.6.0//bin/java -DCONTEXT_VALIDATED=true -mx512M -classpath /R12_setup/startCD/Disk1/rapidwiz/jlib/java:/R12_setup/startCD/Disk1/rapidwiz/jlib/xmlparserv2.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/ojdbc14.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/oui/OraInstaller.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/oui/ewt3.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/oui/share.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/oui/srvm.jar oracle.apps.ad.clone.ApplyDatabase -e /d01/oracle/VIS/db/tech_st/11.1.0/appsutil/VIS_aurie.xml -stage /R12_setup/startCD/Disk1/rapidwiz -showProgress -phase cfg -nopromptmsg
    Log file located at /d01/oracle/VIS/db/tech_st/11.1.0/appsutil/log/VIS_aurie/ApplyDatabase_05092342.log
    ^M
    | 0% completed ^M
    / 0% completed ^M
    - 0% completed ^M
    \ 0% completed RC-50004: Fatal: Error occurred in ApplyDatabase:
    Control file creation failed
    Cannot execute configure of database using RapidClone
    RW-50010: Error: - script has returned an error: 1
    RW-50004: Error code received when running external process. Check log file for details.
    Running Database Install Driver for VIS instance
    Processing DriverFile = /R12_setup/startCD/Disk1/rapidwiz/template/adridb.drv
    Running Instantiation Drivers for /R12_setup/startCD/Disk1/rapidwiz/template/adridb.drv
    instantiate file:
    source : /R12_setup/startCD/Disk1/rapidwiz/template/adrun11g.sh
    dest : /d01/oracle/VIS/db/tech_st/11.1.0/temp/VIS_aurie/adrun11g.sh
    backup : /d01/oracle/VIS/db/tech_st/11.1.0/temp/VIS_aurie/adrun11g.sh to /d01/oracle/VIS/db/tech_st/11.1.0/appsutil/out/VIS_aurie/templbac/adrun11g.sh
    setting permissions: 755
    setting ownership: oracle:dba
    instantiate file:
    source : /R12_setup/startCD/Disk1/rapidwiz/template/adrundb.sh
    dest : /d01/oracle/VIS/db/tech_st/11.1.0/temp/VIS_aurie/adrundb.sh
    backup : /d01/oracle/VIS/db/tech_st/11.1.0/temp/VIS_aurie/adrundb.sh to /d01/oracle/VIS/db/tech_st/11.1.0/appsutil/out/VIS_aurie/templbac/adrundb.sh
    setting permissions: 755
    setting ownership: oracle:dba
    Step 0 of 5
    Command: /d01/oracle/VIS/db/tech_st/11.1.0/temp/VIS_aurie/adrun11g.sh
    Step 1 of 5: Doing UNIX preprocessing
    Processing Step 1 of 5
    Step 1 of 5
    Command: /d01/oracle/VIS/db/tech_st/11.1.0/temp/VIS_aurie/adrundb.sh
    Step 2 of 5: Doing UNIX preprocessing
    Processing Step 2 of 5
    Executing: /d01/oracle/VIS/db/tech_st/11.1.0/temp/VIS_aurie/adrundb.sh
    STARTED INSTALL PHASE : DATABASE : Sun May 10 09:33:17 PDT 2009
    Preparing environment to install databases ...
    Setting LD_LIBRARY_PATH to - /R12_setup/startCD/Disk1/rapidwiz/lib/Linux -
    Setting PATH to - /R12_setup/startCD/Disk1/rapidwiz/jlib/java:/R12_setup/startCD/Disk1/rapidwiz/jlib/xmlparserv2.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/ojdbc14.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/oui/OraInstaller.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/oui/ewt3.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/oui/share.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/oui/srvm.jar -
    Setting CLASSPATH to - /R12_setup/startCD/Disk1/rapidwiz/jlib/java:/R12_setup/startCD/Disk1/rapidwiz/jlib/xmlparserv2.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/ojdbc14.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/oui/OraInstaller.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/oui/ewt3.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/oui/share.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/oui/srvm.jar -
    ... installing VISION demo database
    FINISHED INSTALL PHASE : DATABASE : Sun May 10 09:33:18 PDT 2009
    /d01/oracle/VIS/db/tech_st/11.1.0/temp/VIS_aurie/adrundb.sh has succeeded
    =============
    Now, I am again hitting the same issue .. whatever I try to do after this fail installation i am getting following
    *[oracle@aurie 11.1.0]$ ls*
    ls: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
    *[oracle@aurie 11.1.0]$ cat /etc/issue*
    cat: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
    *[oracle@aurie 11.1.0]$ cd /*
    *[oracle@aurie /]$ ls*
    ls: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory

  • Weblogic Server 8.1 giving weird error while deploying EJB

    Hi All,
    I am using weblogic8.1 server with service pack 4.
    I am trying to deploy an entitybean (ejb2.0) specification. I am getting following error.
    ==========================================================
    [Deployer:149033]preparing application sum.LDN on MyServer
    [Deployer:149033]failed application sum.LDN on MyServer
    [Deployer:149034]An exception occurred for task [Deployer:149026]Deploy application sum.LDN on MyServer.:
    Exception:weblogic.management.ApplicationException: prepare failed for sumEJB.jar
    Module: sumEJB.jar Error: Exception preparing module: EJBModule(sumEJB.jar,status=NEW)
    Unable to deploy EJB: sumEJB.jar from sumEJB.jar:
    [EJB:011017]Error while reading 'META-INF/weblogic-cmp-rdbms-jar.xml'. The error was:
    In bean com.csfb.csar.sum.ods.TradeSetlmtMapping, the abstract method, getHandle(), does not correspond to any container-managed field and is not implemented in the bean class or any of its superclasses.
    In bean com.csfb.csar.sum.ods.TradeSetlmtMapping, the abstract method, getEJBHome(), does not correspond to any container-managed field and is not implemented in the bean class or any of its superclasses.
    In bean com.csfb.csar.sum.ods.TradeSetlmtMapping, the abstract method, isIdentical(javax.ejb.EJBObject), does not correspond to any container-managed field and is not implemented in the bean class or any of its superclasses.
    at weblogic.ejb20.ejbc.EJBCompiler.doCompile(EJBCompiler.java:255)
    at weblogic.ejb20.ejbc.EJBCompiler.compileEJB(EJBCompiler.java:476)
    at weblogic.ejb20.ejbc.EJBCompiler.compileEJB(EJBCompiler.java:407)
    at weblogic.ejb20.deployer.EJBDeployer.runEJBC(EJBDeployer.java:493)
    at weblogic.ejb20.deployer.EJBDeployer.compileJar(EJBDeployer.java:784)
    at weblogic.ejb20.deployer.EJBDeployer.compileIfNecessary(EJBDeployer.java:700)
    at weblogic.ejb20.deployer.EJBDeployer.prepare(EJBDeployer.java:1339)
    at weblogic.ejb20.deployer.EJBModule.prepare(EJBModule.java:498)
    at weblogic.j2ee.J2EEApplicationContainer.prepareModule(J2EEApplicationContainer.java:3142)
    at weblogic.j2ee.J2EEApplicationContainer.prepareModules(J2EEApplicationContainer.java:1583)
    at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:1227)
    at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:1070)
    at weblogic.management.deploy.slave.SlaveDeployer$ComponentActivateTask.prepareContainer(SlaveDeployer.java:2513)
    at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.createContainer(SlaveDeployer.java:2463)
    at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.prepare(SlaveDeployer.java:2379)
    at weblogic.management.deploy.slave.SlaveDeployer.processPrepareTask(SlaveDeployer.java:866)
    at weblogic.management.deploy.slave.SlaveDeployer.prepareDelta(SlaveDeployer.java:594)
    at weblogic.management.deploy.slave.SlaveDeployer.prepareUpdate(SlaveDeployer.java:508)
    at weblogic.drs.internal.SlaveCallbackHandler$1.execute(SlaveCallbackHandler.java:25)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)
    ==========================================================
    This is very surprising error I am getting. Because getHandle(), getEJBHome(), isIdentical() are no where declared in business interface extending EJBObject.
    Descriptor File is perfectly fine.
    $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
    <weblogic-rdbms-bean>
    <ejb-name>com.csfb.csar.sum.ods.TradeSetlmtMapping</ejb-name>
    <data-source-name>com.csfb.csar.ODSDataSource</data-source-name>
    <table-map>
    <table-name>ODS_CNS_ELIGIBLE_TRADES</table-name>
    <field-map>
    <cmp-field>auditCreatedDate</cmp-field>
    <dbms-column>STAMP_ADD_DTIME</dbms-column>
    </field-map>
    <field-map>
    <cmp-field>auditCreatedBy</cmp-field>
    <dbms-column>PROCESS_ADD_ID</dbms-column>
    </field-map>
    <field-map>
    <cmp-field>transId</cmp-field>
    <dbms-column>TRANS_ID</dbms-column>
    </field-map>
    <field-map>
    <cmp-field>transVersId</cmp-field>
    <dbms-column>TRANS_VERS_ID</dbms-column>
    </field-map>
    <field-map>
    <cmp-field>transItemSequenceId</cmp-field>
    <dbms-column>TRANS_ITEM_SEQUENCE_ID</dbms-column>
    </field-map>
    <field-map>
    <cmp-field>externalReference</cmp-field>
    <dbms-column>EXTERNAL_REFERENCE</dbms-column>
    </field-map>
    <field-map>
    <cmp-field>setLmtStatus</cmp-field>
    <dbms-column>SETLMT_STATUS</dbms-column>
    </field-map>
    <field-map>
    <cmp-field>setLmtDate</cmp-field>
    <dbms-column>SETLMT_DATE</dbms-column>
    </field-map>
    <field-map>
    <cmp-field>stampUpdateDtime</cmp-field>
    <dbms-column>STAMP_UPDATE_DTIME</dbms-column>
    </field-map>
    </table-map>
    <weblogic-query>
    <query-method>
    <method-name>findAll</method-name>
    <method-params/>
    </query-method>
    </weblogic-query>
    </weblogic-rdbms-bean>
    $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
    Please Help..

    <p>I could not find any documentation that suggested LIMIT or OFFSET where supported. Some of our developers needed to use limit, in the end all I could suggest was using a dynamic query and setting the maximum number of results see here
    .</p>
    <p>
    Hussein Badakhchani</br>
    </p>

  • Hello friends while doing file to jdbc senario I am getting error

    Hello All,
    while doing file to jdbc senario in sap xi getting error in the receiver communication channel..error is
    2007-07-17 04:11:00 Error SAPEngine_Application_Thread[impl:3]_35 1184625660906 Attempt to establish database connection failed with SQL error java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC]Error establishing socket.
    2007-07-17 04:11:00 Error SAPEngine_Application_Thread[impl:3]_35 1184625660921 Exception caught by adapter framework: JDBC Adapter Receiver Channel RA: Database connection could not be established
    2007-07-17 04:11:00 Error SAPEngine_Application_Thread[impl:3]_35 1184625660921 Delivery of the message to the application using connection AFW failed, due to: JDBC Adapter Receiver Channel RA: Database connection could not be established.
    I am weighting for ur replay...
    Yours,
    Sateesh.j

    Hi,
    This might help you...go through the document..
    http://help.sap.com/saphelp_nw70/helpdata/en/1d/756b3c0d592c7fe10000000a11405a/frameset.htm
    vasanth

  • BAPI_ACC_DOCUMENT_POST    Giving an error while posting

    Hi friends,
    I wanted to post a Document using  bapi BAPI_ACC_DOCUMENT_POST with tax data and jurisdiction code. Getting an error message " E RW 003 No currency information transferred into Accounting" though I have given  the Currency info.    
    Below is the data that passed to the BAPI
    <header> data
    OBJ_TYPE                       BKPFF         
    OBJ_KEY                        $             
    OBJ_SYS                        T90CLNT810    
    BUS_ACT                        RFBU          
    USERNAME                       MNAGOORI      
    HEADER_TXT                      DOCU POST MD 
    COMP_CODE                      3000          
    DOC_DATE                       17.01.2007    
    PSTNG_DATE                     17.01.2007    
    TRANS_DATE                                   
    FISC_YEAR                      2007          
    FIS_PERIOD                     01            
    DOC_TYPE                       WE            
    REF_DOC_NO                                   
    ACCOUNTGL TABLE DATA
    ITEMNO_ACC                  0000000001 
    GL_ACCOUNT                  445000     
    ITEM_TEXT                      TEST FOR MD1
    REF_KEY_3                      40         
    ACCT_KEY                                  
    ACCT_TYPE                      S          
    COMP_CODE                    3000       
    BUS_AREA                       9900       
    ACCOUNTPAYABLE
    ITEMNO_ACC                     0000000002
    VENDOR_NO                      9999      
    GL_ACCOUNT                     191100    
    REF_KEY_1                                
    REF_KEY_2                                
    REF_KEY_3                      50        
    COMP_CODE                      3000      
    BUS_AREA                       9900      
    ITEM_TEXT                        TEST
    AccountTax table
    ITEMNO_ACC                     0000000001
    GL_ACCOUNT                     445000   
    COND_KEY                       JP1I     
    ACCT_KEY                       NVV      
    TAX_CODE                       I1       
    TAX_RATE                          6,000 
    TAX_DATE                                
    TAXJURCODE                     PA0000000
    ITEMNO_ACC                     0000000002
    GL_ACCOUNT                     191100    
    COND_KEY                       JP1I      
    ACCT_KEY                       NVV       
    TAX_CODE                       I1        
    TAX_RATE                          6,000  
    TAX_DATE                                 
    TAXJURCODE                     PA0000000 
    CurrencyAmount table
    ITEMNO_ACC                     0000000001                    
    CURR_TYPE                      00                            
    CURRENCY                       USD                           
    CURRENCY_ISO                   USD                           
    AMT_DOCCUR                                          100,0000 
    EXCH_RATE                                                    
    EXCH_RATE_V                                                  
    AMT_BASE                                            100,0000 
    ITEMNO_ACC                     0000000002                     
    CURR_TYPE                      00                             
    CURRENCY                       USD                            
    CURRENCY_ISO                   USD                            
    AMT_DOCCUR                                          100,0000- 
    EXCH_RATE                                                     
    EXCH_RATE_V                                                   
    AMT_BASE                                            100,0000- 
    I could able to post without tax data.
         I feel some of the feilds are missing the required data. Please any one could help me.
    Thanks
    Md

    Hi Aaron,
                I am testing the BAPI in SE37, the values are given below  which I am trying to post.
    [code]
    ****<header> data
    OBJ_TYPE         BKPFF
    OBJ_KEY           $
    OBJ_SYS           T90CLNT810
    BUS_ACT            RFBU
    USERNAME        MNuser
    HEADER_TXT      DOCU POST MD
    COMP_CODE      3000
    DOC_DATE          17.01.2007
    PSTNG_DATE      17.01.2007
    TRANS_DATE
    FISC_YEAR          2007
    FIS_PERIOD         01
    DOC_TYPE           WE
    REF_DOC_NO
    ACCOUNTGL TABLE DATA
    ITEMNO_ACC             0000000001
    GL_ACCOUNT            445000
    ITEM_TEXT                 TEST FOR MD1
    REF_KEY_3                40
    ACCT_TYPE                S
    COMP_CODE              3000
    BUS_AREA                 9900
    ACCOUNTPAYABLE
    ITEMNO_ACC                0000000002
    VENDOR_NO                9999
    GL_ACCOUNT               191100
    REF_KEY_1
    REF_KEY_2
    REF_KEY_3                   50
    COMP_CODE                3000
    BUS_AREA                    9900
    ITEM_TEXT                     TEST
    AccountTax table
    ITEMNO_ACC               0000000001
    GL_ACCOUNT               445000
    COND_KEY                 JP1I
    ACCT_KEY                  NVV
    TAX_CODE                   I1
    TAX_RATE                   6,000
    TAX_DATE
    TAXJURCODE                PA0000000
    ITEMNO_ACC               0000000002
    GL_ACCOUNT             191100
    COND_KEY                 JP1I
    ACCT_KEY                  NVV
    TAX_CODE                    I1
    TAX_RATE                   6,000
    TAX_DATE
    TAXJURCODE               PA0000000
    CurrencyAmount table
    ITEMNO_ACC            0000000001
    CURR_TYPE             00
    CURRENCY               USD
    CURRENCY_ISO         USD
    AMT_DOCCUR           100,0000
    AMT_BASE               100,0000
    ITEMNO_ACC               0000000002
    CURR_TYPE                00
    CURRENCY                 USD
    CURRENCY_ISO          USD
    AMT_DOCCUR             100,0000-
    AMT_BASE                 100,0000-
    [/code]
    Thanks
    Md

  • Plumtree Job Dispatcher Service giving an error while starting the service

    Could not start the plumtree Job Dispatcher service service on LOcal Computer. The service did not return an error. THis could be an internal windows rror or an internal service error. If the problem persits, contact your system administrator

    Hi Ray,
    I assuming you are on 5.0.2. If so, please refer to chapter 3(Pre-installation) of the install document, specifically the setup of the automation server user. The stated error indicates that the automation user info you entered into the installer does not match up with the entries in the pre-install steps.
    Hope that helps.
    Vasanth

  • Workflow giving 'unknown error' while executing  in swdd in production

    Hi Experts,
    I had workflow working fine in dev and qa . But its not working in production .
    I tried to execute the workflow directly through swdd.
    It is telling 'Workflow cannot be activated' after executing .
    When i tried to display the workflow log it says Unknown err(v1)
    Kindly guide me in proceeding further .

    This is waht i get ...i acnt get a clue from this .
       Execution of programs after import (XPRA)
       Transport request   : ND1K905351
       System              : NP1
       tp path             : tp
       Version and release: 372.04.04 700
       Post-import methods for change/transport request: ND1K905351
          on the application server: PROD
       Post-import method RH_ACTIVATE_WFOBJECT_AFTER_IMP started for PDWS L, date and time: 20090225145727
       Object requested is currently locked by user NC02
       Errors occurred during post-handling RH_ACTIVATE_WFOBJECT_AFTER_IMP for PDWS L
       RH_ACTIVATE_WFOBJECT_AFTER_IMP belongs to package SP00
       The errors affect the following components:
          BC-BMT-OM (Organizational Management)
       Post-import method RH_ACTIVATE_WFOBJECT_AFTER_IMP completed for PDWS L, date and time: 20090225145732
       Post-import methods of change/transport request ND1K905351 completed
            Start of subsequent processing ... 20090225145727
            End of subsequent processing... 20090225145732
       Execute reports for change/transport request: ND1K905351
          on the application server: PROD
       Reports for change/transport request ND1K905351 have been executed
            Start of................ 20090225145732
            End of.................. 20090225145732

  • Error in uploading file in lsmw

    while uploading file in lsmw I am getting an error as
    'File 'C:\cust_errors.txt'does not exist or is currently locked.'
    at the bottom of the screen.
    How to overcome this problem?

    Hi,
    Check if the file is being edited .
    save it and close it.
    Then try to upload from the step "Specify files".
    Regards,
    Hari Kiran

  • Error while archiving the repository

    Hi all
    We are facing error while archiving the repository. It is giving following error while archiving:
    Error reading blob from A2i_CM_XMLschema table
    Operation ended in ERROR : 84020008H : Database binary object error.
    Can anybody help me on this.
    I am not getting error while working with repository. Its working fine but only while archiving its giving this error.
    Thanks in advance.

    I tried doing that . Now after compacting i am not getting warning while verifying but while archiving i am getting following error :
    *Error reading blob from A2i_CM_XMLSchema table*
    *$$$ Operation ended in ERROR : 84020008H : Database binary object error.*
    Also I tried unarchiving from earlier archived file but for unarchiving also its giving me following Error:
    MDM Repository data is out of date or locked by another MDM Server. Refresh the data and try the operation again.
    I checked. There is no another MDM server accessing the repository. What does it mean by Refresh Data.
    Do above two problems inter-related.
    Can anybody help me on this.
    Thanks in advance

  • In LSMW while executing the specify file step logical file name and path.

    Hi ,
    In LSMW , while executing the specify file step, logical file name and path is mandatory field to entry, but in some of other LSMW objects, these fields are not mandatory one, i want to know is it possible for me to do hide the logical file name and path field in specify file step.
    thanks
    Md nisar

    Hi,
    For some Transactions while executing the Specify file step Logical File and Logical Path are mandatory.
    In this case Converted file will be stored in the application server. According to the specified Logical File and Logical path.
    Hope this will help you....
    Regards,
    Tirumala Reddy

Maybe you are looking for