While updating 4.0 version to 5 version system shows sim card is not valid. My iphone is not working .Please help me
while updating 4.0 version to 5 version system shows sim card is not valid. My iphone is not working .Please help me
I would imagine your iPhone was hacked to make it work on your local carrier.
Updating the iOs to 5.xx will lock it back to the original carrier .The carrier holding the lock are the only
entity able to authorise the unlock .You will have to contact them and see if they unlock and the terms the apply
Similar Messages
-
I had an PC crash while backing-up my iPhone4, before installing iOs7.
Now I am unable to restore the iPhone.
Can anyone please help me!
Arjen RonhaarHey Arjen Ronhaar,
Thanks for the question. I understand you are experiencing issues updating your iPhone to iOS 7. If you have not already done so, you may want to restart or reset the iPhone:
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
If the above steps do not resolve the issue, you'll want to restore your iPhone in recovery mode with iTunes:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Thanks,
Matt M. -
I have trouble while update iphoto, i can install new version of i photo
i have trouble while update iphoto, i can install new version of i photo
What's the problem, exactly?
-
Hi I have got a iPad1 and tried to update to version 5.0.1 many times but never work.please help me.
Hi I have got a iPad1 and tried to update to version 5.0.1 many times but never work.please help me.
alway say it was corrupted
Restore the iPad as a new device....
How to set up your iPhone, iPad, or iPod touch as a new device -
im updating my iphone from 3.1.2 to 3.1.3 version and suddenly it says the sim card im using dosnt support my i phone..then i cant open my phone..what can i do?
Use a supported SIM card.
Remove/re-install the SIM.
Try a different SIM. -
my keynote has frozen and wont open but the saved version wont open either. if i restart my laptop i am afraid that it will erase my work. please help me
Try this repair for Keynote 6.2, ensure you complete all the tasks and in the order shown:
1
delete all the iWork applications if you have them, not just Keynote, using Appcleaner from Mac Update, its a freeware application
2
empty the trash: Finder > Empty Trash
3
Shut down your Mac, wait 30 seconds, then power on the Mac, immediately after the start chime, hold down the Shift key
When you see the grey Apple symbol and progress indicator (a spinning gear), release the Shift key.
If you are prompted to log in, type your password, then hold down the Shift key again as you click Log in.
Let the Mac fully boot up, it will take longer as the OS is repairing the drive
4
when fully booted, go to Applications > Utilities > Disc Utility; click on the boot drive then First Aid tab and click repair disc permissions
5
when complete, restart the Mac normally, Apple menu > Restart
6
install Keynote from the Mac App Store
let us know if this helped -
I have a sony rx100 and my version of lightroom (4) will not recognize the raw (.ARW) files. Please help!
I have version 4.4.1 on my computer now, which is functioning properly - but does not read the .ARW files. When I download the link you sent and try to open it, it pops up as version 5 and I get this image (attached). This is my first time in one of these threads, not sure if i have to reply to each of you individually?
DdeGannes, could you please tell me how to recover the serial number from my operating system?
Thank you SO much everyone! -
can not pair my itouch with my mac book pro version 10.6.6 .. it seems that maybe my itouch is having trouble connecting as my mac seems to pair, then waits for my itouch and it never works. please help!!
I am not certain this will fix your problem but I suggest you assign the printer a static IP address.
Using the printer's front panel, select Menu > Network > WLAN > TCP/IP > Boot method, and change it to "static". Provide a static IP address that is on your LAN's subnet.
For example, if you are using an AirPort Extreme, you might give it an IP address of 10.0.1.100. If you are using a Netgear or Linksys router that defaults to issuing 192.168.x.x addresses, you might give it an address of 192.168.1.100. That way, the printer will always "reside at the same address" on your network. If your router has the ability, you should reserve that address so that the router does not attempt to assign it to another DHCP device.
Then, go to System Preferences > Print & Scan, and delete your existing printer with the "–" (minus) button. Add it again, using the "+" (plus) button. In the window that appears, select the IP pane, and from the Protocol menu select "Line Printer Daemon (LPD)". In the Address field type the IP address you gave your printer.
If all goes well the "Pring Using" field will detect the printer at that address and automatically select the appropriate driver. You will see something similar to the following screenshot ("name" can be whatever you decide, and "location" is optional):
Click Add, then you can close System Preferences.
There are other possible reasons your printer is "not responding" which could include wireless interference from competing wireless networks, but try this "static IP" method first. It should mitigate the problem. -
Que puedo hacer cuando el iphone 4s version 5.19b1979 no lee la sim card dice que no es compatible
que puedo hacer cuando el iphone 4s version 5.19b1979 no lee la sim card dice que no es compatible
el problema es que la tarjeta SIM no es compatible?
-
I HAVE AN IPHONE 5 A1429. MY ITUNES IDENTIFIED AS (GLOBAL) VERSION BUT USE A SIM CARD. IT'S MY IPHONE GSM OR CDMA AND CAN I USE FOR AT&T?
If you are able to use the iPhone with sim cards from different carriers so you know it is unlocked, then it should work with an AT and T sim with the permission of AT and T.
-
I updated to Mountain Lion and now my Parallels application no longer works; please help! What to do???
Make sure you have the latest version of parrallels. Think older versions are not compatible.
-
I have purchased Iphone 4 from US and its not having sim in it and rt now when i have updated this to io5 ,it is showing "sim card inserted in iphone is not supported" and i am not able access aything."
Earlier i was able to use all application in this using IOS 5.0.1.
I have format it and after that i am not able to use it.
How to restore my itunes to 5.0.1???Well, welcome to the world of "hacked" phones. If your purchase was from the US, you obviously purchased an iPhone that is locked to a US carrier. The iPhone must have been jailbroken and unlocked via software to accommodate your foreign SIM card. Now that you have updated the phone, it is locked back to the US carrier. Only the carrier can authorize Apple to unlock the iPhone and none of the US carriers will unlock the iPhones. Best suggestion is to sell the phone and obtain a factory unlocked version directly from the Apple store.
To answer your other question, there is not a supported method to downgrade iOS. -
I have updated to Mac OS X v10.6.7 and STILL cannot get video into iMovie from Sony HDR SR11 :-( PLEASE HELP ME ...
* Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
* Trash the current Firefox application to do a clean (re-)install.
* Install the new version that you have downloaded.
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data. -
We updated to the new Pages 5.0.1 and now none of our Pages 9 documents will open. Please help.
We updated to the new Pages 5.0.1 and now none of our Pages 9 documents will open. Please help.
Since you have Pages '09 documents it is safe to assume that you own Pages '09. If you bought it from the App Store you should be able to download it again to your new machine. If you have the install disks, you can install it on the new machine and the find the updater for it.
Or you can go to the Apple Store (make an appointment) and get them to install iWork '09 on your machine. They will do this for free if you can provide any proof that you owned it on your older machine. They may do it for free anyway.
As others said, your '09 files should open, so perhaps they were '08 files. In which case you must open with '09 first. For this reason Apple will sometimes give you a free version of iWork '09. If you are not near an Apple Store try phoning them. No guarantees, but others have reported that Apple sent them a free DVD.
Worse comes to worse, look to buy it on Amazon or eBay, but try Apple first. -
After i updated my iphone 4s from 8.1.2 to 8.1.3 problem occurred.i cant restore and update my phone?saying that iphone could not be restored,an unknown error ocuurred.please help me?
Thanks for the update and clarification. In researching the issue it seems that the 2003 error code may have something to do with the USB connection. I would use this section of one of the above articles:
Get help with iOS update and restore errors
If the USB connection between your device and computer is interrupted, you might not be able to update or restore.
To narrow down the issue, you can try different equipment:
Use the USB cable that came with your device, or a different Apple USB cable.
Plug your cable into a different USB port directly on your computer. Don't plug it into your keyboard.
Try a different computer.
Solve other issues with the USB connection, then with your security software.
If you still see the error message, check for hardware issues by following the next section.
Check for hardware issues
Related errors: 1, 3, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
These errors mean that your device or computer might have a hardware issue that stops the update or restore from completing.
Check that your security software and settings aren't blocking your device from communicating with the Apple update server.
Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
Make sure that your security software and settings are allowing communication between your device and update servers.
If you still see the error message when you update or restore, contact Apple support.
Maybe you are looking for
-
Anyone using HiddenMail? Does it still work?
Hello all. I have been using HiddenMail for a while, to launch Mail at startup and hides Mail (Somehow, putting Mail in Login Startup Items and check 'hide' doesn't hide it) But somehow with the latest OS Update, HiddenMail doesn't do its thing: Hide
-
I am having issues with Quicktime. It would not open, so I tried to "delete" it and re-intall. When I did that, it would not let me install it and I got a message saying it could not install because I already had it. So, I guess what I need to know
-
Hello experts. my requirement is , I am having a fiscial year ( gjahr) and period ie month (monart) . Now i need afunction module that gives the last date of the month. say if it is january it should give 31 - month-year. I want to populate this date
-
Hi All, Im working on a screen exit, i need to have some 7 fields in one subscreen and i need to display this subscreen based on EKKO-EKORG,but this value will be given by user in previous screen,how can i fetch this field in my screen exit,coz if i
-
10.4.11, 10.5 and XP Home compatible multifunction printer with 4+ inks
I'm looking for an inkjet multifunction printer (normally I don't go for these, but due to the constrained space of the friend I'm making an exception) with 4 or more separate color ink cartridges with 10.4.11, 10.5, and XP Home compatible scanning a