White screen when playing dvds. Please help.

When I fast forward or rewind a movie on my Macbook the screen becomes white while the movie still plays. It takes about a minute for the white screen to go away. This has never happened before. Is there a problem with my Macbook or is it the dvd?

I actually figured out what was wrong. On my "viewDeactivate" event, I was cleaning up all object references (including the StageVideo instance). So everytime viewDeactivate was dispatched, the blank white screen would show up.
For anyone who runs into this situation (on the iPad), you should know that the viewDeactivate event is dispatched not only when moving between views, but also when alerts (or notifications) popup, when going back to the Home screen, and also when you double tap the Home button for the multitasking bar. Likewise the viewActivate event will fire when you return from any of the above mentioned states on the iPad, not just when moving between views. Knowing this helped me to fix the issue I was facing with StageVideo.
Hope this helps someone.

Similar Messages

  • White screen when playing StageVideo iPad 2, can this be controlled?

    Hello,
    I am currently building an application where the background of the application is a looping video using the StageVideo API. The video plays fine and runs smoothly, however there are cases where the video will get interrupted (and as a result displays a white screen). One of these cases include double tapping the home button on the iPad, attempting to switch apps. When the screen slides up to reveal the currently available apps, the screen video stops playing and the screen goes white. Another case is when the iPad receives a notification or alert. When this happens, the video stops playing and the screen goes white. Finally, I have tested this on two iPads (one Verizon and one AT&T). When entering any view that has this video playing, the AT&T iPad 2 would quickly flash a white screen before playing the video. However, on the Verizon iPad this does not happen.
    I would like to know if there is any way that this can be controlled so that I can produce consistent behavior across devices. Would setting persistNavigatorState to true help? Or should I be listing for some sort of status on the StageVideo instance?
    What are your thoughts?
    Thanks in advance for your help.

    I actually figured out what was wrong. On my "viewDeactivate" event, I was cleaning up all object references (including the StageVideo instance). So everytime viewDeactivate was dispatched, the blank white screen would show up.
    For anyone who runs into this situation (on the iPad), you should know that the viewDeactivate event is dispatched not only when moving between views, but also when alerts (or notifications) popup, when going back to the Home screen, and also when you double tap the Home button for the multitasking bar. Likewise the viewActivate event will fire when you return from any of the above mentioned states on the iPad, not just when moving between views. Knowing this helped me to fix the issue I was facing with StageVideo.
    Hope this helps someone.

  • HT1766 White Screen, NOTHING works! PLEASE HELP!!!

    Okay, so I was on the Facebook app on my iPod Touch... Then the screen froze, shortly after that my screen turned white. The two button thing isn't working and i don't know what to do, i don't live near an Apple Store, and i can't go there. so someone please help me. by the way, it was about 10% battery when this happened and nothings happening when i plug it into the charger or when i go to iTunes, my iPod doesn't show up.

    - Try here:
    iOS: Not responding or does not turn on
    - If not successful and you can't turn it off, let the battery fully drain. AFter charging for at least an hour try again.
    - If still not usccessful then service is required. The Apple Genius Bar is recommended.

  • White screen when playing .avi file

    I recently upgraded to Quicktime Pro, and when I try to play a video that I downloaded, all I get is a white screen. The time counts up perfectly, but there is no picture. The same thing happened when I had just the basic quicktime.
    I'm not sure if it's an issue with the quicktime, or if I need to get a new component?
    If anyone could help me out with this, it would be greatly appreciated!
    Thanks,
    Jord

    The Xvid package should come with a read me that tells you where the files need to go. Also, does the movie you're trying to watch use Xvid? Get Info when you're in QuickTime Player, what codecs does it say are used by the movie?

  • White screen when playing back .mov files in QT.

    I have two different .mov files created using an older version of QT (7.0.3, I think). The content is the same on both, but one has a bitrate of 750k and the other has a bit rate of 1200k. The one with 750k still plays just fine, but the other only gives me a white screen.
    The problem started when I upgraded to 7.1.5, and I can't find the old installer for 7.0.3. Can anyone help?
    Trond

    Thank you very much for trying to figure this out. I have noticed that a lot of people have had the same problem. I have tried to change pretty much all settings on the different computers at work and even taken the files home to try them out on my Mac and also on my PC. Both have QT pro. But still the same problem.
    I have now uploaded screenshots of both files' info pages, just ot make sure I'm looking at the correct thing. They are uploaded to
    http://www.flickr.com/photos/54776079@N00/
    Sorry about the donkey pictures
    Trond

  • White Screen of Death Questions [PLEASE HELP!]

    If someone actually cares about my issue, they will read all of the following. Let's see how many of you are out here and how many just want to answer simple short questions for reputation.
    Okay, so I've ran into my first ever iPod Touch issue. I've never owned an iPhone, but I have had an iPod in the past and know a bit about them. I'm going to be 100% honest and I need a serious answer because I'm upset and angry. If anyone can be bothered to read the following, THANK YOU. If anyone could help me out in any way by giving me suggestions/tips and/or a solution, THANK YOU. But anything that can help is appreciated.
    I had my board shorts on when this ocurred. I went to the toilet, doing my own business. I had my iPod Touch in my bank pocket which went to about half way down my thigh. The iPod Touch at the time was facing away from my thigh. Pulling down my pants, the iPod Touch hit the tiled floor. It hardly even hit the floor, all I heard was a little click and I realised it was my iPod. It was flat at the time, I picked it up and pressed the Home button immediately to ensure it was okay. It sort of lit up like a white background, but had a very low opacity. Since it was flat, I assumed it was normal.
    Putting my iPod on charge right after my toilet break, I waited and waited for it to charge quickly enough for me to see the screen as I was a little worried not having seen that faded screen before. When the Apple logo was to appear, it gave me a lit up white screen. I was so confused as there were no marks AT ALL on my screen or any other part of the iPod.
    NOTE: My iPod is still under warranty.
    Did my research and came to the conclusion that it was the infamous 'White Screen of Death'. Where do I go from here? I have no clue!
    I have important information such as a To Do list and my Contacts within the iPod. I NEED to retrieve this information. Is there any way I can do this?
    I can still use the iPod, as if the screen were showing. Sounds are working, but there is just a blank, lit up white screen. Sometimes when I hold the Home button, On/Off button & the Volume Up buttoon all at the same time for ~10-20 seconds, the Apple logo comes up as if the screen was all fixed. 5 Seconds later, it goes all funny as if there were faded white lines and a faded white background but still being able to see the logo/screen. When the iPod loads, it just goes back to the lit up white screen.
    Here's another odd thing to this, when I leave my iPod Touch sitting in a spot remotely, without touching it for a few hours, when I come back to it and hit the Home button, the iPod will begin to work fine as if nothing ever happened. No white screen, no nothing, just simply use it as I wish. I can even sometimes lock it, and then unclock it again with it still showing perfectly. However, when I tend to click the On/Off button after this happens, or if I just continue to use it for ~1 minute, it will eventually do the same as the above paragraph in second last sentence.
    This may be important:
    The iPod charges fine.
    The iPod can be used with my computer and iTunes fine.
    To sum it all up, everything can be done, including using the iPod, but with a lit up white screen.
    Here are some questions I have for you guys:
    Will Apple cover this in my warranty?
    If they won't, what should I do?
    How much would a replacement screen cost?
    Should I attempty to open my iPod if they do not cover it by warranty? (I have not attempted as I don't want to void anything).
    What could be the cause and why?
    How can I retrieve that important information? (Contacts & To Do List)
    Have you got any suggestions/tips for me?
    I need this resolved guys. I'm very upset and angry over the whole situation. If a little thump on the tiles like that (it's not like I dropped it or anything) can damage the screen that much, then this devices from Apple can't be very reliable. All I'm asking for is some genuine service/help to resolve my issue. If this can be done, I will be one VERY happy person.
    Daniel

    Will Apple cover this in my warranty?
    As stated above it is not covered by the warranty as it will be deemed accidental damage.  You can try explaining what happened to somebody at the Genius Bar and they may cut you some slack and replace it at no cost.  They might not though as Apple has started to really come down hard on eliminating replacing accidentally damaged iPods at no cost.
    If they won't, what should I do?
    Again, bring it into them anyways and explain what happened.  You have nothing to lose either way.  Otherwise, you really only have 2 other options.  Send it to a third party service center to have them take a look at it and possibly repair the iPod, or do some studying online and learn how to open up the device yourself and take a look.  There are some excellent step-by-step repair guides at http://www.ifixit.com/.
    How much would a replacement screen cost?
    This depends on where or how you have it repaired.  Here is Apple's repair pricing guide.
    http://www.apple.com/support/ipod/service/prices/
    Third party repair centers will cost less and they'll actually swap out the bad part rather than just replace the entire iPod as Apple does.
    Should I attempty to open my iPod if they do not cover it by warranty? (I have not attempted as I don't want to void anything).
    If you have a warranty on it still, I wouldn't quite yet.  Take it to your local Apple store as explained above.  Otherwise, I would only if you feel comfortable working with small electronics and consider yourself handy with them. 
    What could be the cause and why?
    As stated already, it could be a damaged or loose LCD ribbon cable or the LCD screen itself is damaged.  As to what exact component, there is no way to tell.
    How can I retrieve that important information? (Contacts & To Do List)
    Make a backup of the device in iTunes before taking or sending it in for service or before you decide to open it up (if you do happen to go that route).  See here what is included in the backup of the device.
    iTunes: About iOS backups
    If you get a new or replacement device you can restore it from that backup.
    Have you got any suggestions/tips for me?
    As I have already stated numerous times, try taking it into your local Apple Store and see if there is anything can do for you such as swap it out.  Remember that they are not obligated to do so since the damage is technically accidental.  Be kind and polite when explaning what happened. You never know what could happen!
    B-rock

  • Why do I get a white screen when playing movies?

    Recently, for no apparent reason, when I play movies on my AppleTV 1st gen, the screen is completely white, no picture or sound. When I play TV shows, everything works like a charm. But whether they are movies I already own, or movies I rent, there is only a white screen and no sound.  Anyone have any ideas?
    Thanks,
    AD

    Try restarting the Apple TV by removing ALL the cables for 30 seconds, or resetting it using the reset option under general.

  • White Screen when playing Movie

    Hey, I'm downloading Ironman (bought) and its already past the part when I can begin to watch it, even though it's not finished downloading. When i hit play, a white screen pops up and nothing plays, it stays like that even when fastforwarding. I go to play my other movies and the same thing happens with all of them except Speed Racer which plays fine. Why does my apple tv's screen go white?

    I had exactly the same problem, you will find many posts saying that quicktime and other programs need to be upgraded. Quicktime will not do anything here if it is about your appletv. Just make sure that your appletv is up to date with 2.2 software and that itunes on your connected computer is the latest. What will definitely work after all the updates is that you restart your appletv to factory settings, install all available updates, set it up again as if you just bought it and it will definitely work again.

  • White screen when playing mpeg4, sound ok

    I have downloaded the latest version of QT and updates. I have two types of MP4 files I want to play, one is a movie format that my Olympus compact films in, and the other is a video podcast downloaded from the BBC. When I try to play either, I just get a WHITE SCREEN with sound. Any ideas?
    Thanks for any replies

    Hi Stormcab. I am receiving the same result when streaming .mov files. Everything worked great until I install QT 7.1.5 and have tested on several PC with same results. I posted a similar questions last week with several replies but no fixes yet.
    Best.
    B

  • No adjustments appear in canvas when played! PLEASE HELP

    all of my footage is slightly darker (some worse than others) when played in canvas. i try to adjust in many different ways and adjustments don't appear when playing, after i render. any thoughts/ideas appreciated. if this is something silly and simple, i apologize i'm pretty new!

    slyflyguy wrote:
    mp4 transcoded to mpeg 2 linear PCM .mov - had to use handbreak to rip from dvd.
    MPEG 2 is not an editing codec.
    Convert that into Prores as well.
    i'm not sure what my sequence settings are, where can i find them, what should they be?
    With the timeline active select Command 0 (zero), or menu: Sequence > Settings.
    Tell us the settings.
    Rienk

  • My mac book pro's screen is white.... Please help me fix it!!

    Someone please help... My computer was making a wired noise so without thinking I snapped off the battery pack and now it starts shows the apple icon makes the sound like its going to start but after a minute the apple goes away and the screen is just white.... Please help me!!

    boot from dvd/recovery partition and repair drive with Disk Utility

  • The status bar is pushed up at about 3/4 of the screen, so I can view onlu firefox at about 1/4, good thing there is a scroll bar, but below the status bar is white display? can u please help me, I want to drag down the status bar so I can have a full vi

    The status bar is pushed up at about 3/4 of the screen, so I can view only Firefox at about 1/4, good thing there is a scroll bar, but below the status bar is white display? can u please help me, I want to drag down the status bar so I can have a full view
    == This happened ==
    Every time Firefox opened

    Your code is absolutely unreadable - even if someone was willing to
    help, it's simply impossible. I do give you a few tips, though: If you
    understand your code (i.e. if it really is YOUR code), you should be
    able to realize that your minimum and maximum never get set (thus they
    are both 0) and your exam 3 is set with the wrong value. SEE where
    those should get set and figure out why they're not. Chances are you
    are doing something to them that makes one 'if' fail or you just
    erroneously assign a wrong variable!

  • Blank screen in itunes store-please help im not very technical and when i click on my itunes app the screen is blank how can i fix this please?

    Blank screen in itunes store-please help im not very technical and when i click on my itunes app the screen is blank how can i fix this please?

    See if any of the following fix it.
    Try logging out of your account on your phone by tapping on your id in Settings > iTunes & App Store and tap 'Sign Out' on the popup and then log back in.
    If that doesn't fix it then try closing the iTunes store app via the phone's multitasking bar and see if it works properly when you open the app : double-click the home button to open the taskbar and then swipe or drag iTunes from there up and off the top of the screen to close it, and the click the home button to close the taskbar.
    A third thing to try is a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the equivalent of a reboot.

  • White screen when turn ipod touch on...help

    There is a white screen when I turn my iPod touch on.   please help

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • HT1349 WHEN I TURN MY IPHONE 3S ON IT ASKS ME TO CONNECT TO ITUNES AND RESTORE. I HAVE DONE THIS 10 TIMES AND STILL GET THE SAME SCREEN. CAN ANYONE PLEASE HELP??

    WHEN I TURN MY IPHONE 3S ON IT ASKS ME TO CONNECT TO ITUNES AND RESTORE. I HAVE DONE THIS 10 TIMES AND STILL GET THE SAME SCREEN. CAN ANYONE PLEASE HELP??

    Has your phone been jailbroken?  If so, you will likely never get it to work again.
    You can try placing your phone in DFU mode (search google) and restoring.

Maybe you are looking for

  • How to switch off the loudspeaker during the video...

    Hi everybody! That is an old problem, and I found lots of topics and messages, but still no solution. How long could it take, and how many programmers and designers should work till we can get the button for switching on and off the loudspeaker?

  • Are idoc fields case sensitive?

    Hello, there has been an error during idoc processing. The trading partner field was filled in lowercase and this is bringing me error      Message no. FB279  ' Company dp0017 is not defined'. The other idocs had DP0017 filled in and were processed f

  • CAN I INSTALL SOLARIS 10 INTEL PLATFORM ON MY PC

    Can anybody guide me whether i can install solaris 10 intel platform on my pc having following configuration 1. Processor = AMD SEMPRON 2500+ 64-BIT. 2. MainBoard = ASUS K8V-MX. 3. RAM-= 512 MB DDR PC3200 4. Display = Onboard VIA/S3G Unichrome Pro IG

  • Objects in heap

    Is there any way to find out, 1) How many objects created in the heap for our program? 2) Can we know what are the objects created in the heap memory?

  • Black Screen Appear during Operating System normal usage

    Hi! I have a Compaq Presario CQ50-102LA, the problem that I have is that when I try to use the operating sytem a black screen appears(sometimes the sreen is blue or red or green) I thought that the problem was with my Operating System, but I tried in