White screen with flashing folder containing a question mark

I attempted to boot my MacBook and it is now only showing a white screen with a folder containing a question mark. I have only had the MacBook for less than 3 months. Help!!!!

There are four general causes of this issue:
1. The computer's PRAM no longer contains a valid startup disk setting when there aren't any problems with the disk itself. This can be checked for by pressing the Option key and seeing if the drive appears.
2. The internal drive's directory structure has become damaged. This requires usage of an alternate bootable system to perform the repair.
3. Critical system files have been deleted. This requires usage of an alternate bootable system to reinstall them.
4. The internal drive has died or become unplugged. This is the most likely case if the computer took a sharp impact or there are unusual sounds coming from its location.
(102241)

Similar Messages

  • White screen with a folder and a question mark in the Folder

    Hi,
    My daughter's Desktop Mac Pro won't reboot. On reboot, it shows a white screen with a folder and a question mark within, It just stays there and nothing happens. Is this a problem with a dead hard drive, dead processor, faulty USB connection, problem with airport.? We need advise and help, please!
    effie imperio

    Hi, Anonymoustache, thanks for responding.
    Yes, I think it is "a flashing question mark". If it is flashing, you think it is a hardware problem like a dead hard drive? I had a flashing question mark with my Power book G4 and Apple replaced a dead hard drive.
    Thanks Hatter, I will convey your response to my daughter and see if it will help.
    effie imperio

  • I messed up badly by trying to restore my brand new macbook pro by doing restart then command R and choose disc utility repair now when I start ,all I get is the white screen with a folder and a question mark,What can I do???help please

    I messed up badly by trying to restore my brand new macbook pro by doing restart then command R and choose disc utility repair now when I start ,all I get is the white screen with a folder and a question mark,What can I do???help please

    Can you still boot to the Recovery partition using Command and R whilst booting? Or did you wipe the Recovery partition as well?
    If your Recovery partition is still intact, you can simply boot to it and reinstall the OS via the Internet. If you wiped the Recovery partition, you can hold down Command, option and R keys whilst booting and boot into true Internet Recovery mode. You'll be able to reformat the hard drive, erasing all partitions (format it as "Mac OS Extended (Journaled)" with a dingle GUID partition) and then reinstall the OS that shipped with your machine.
    Note that you should use a physical Ethernet connection when restoring over the Internet - it's three times slower if you use wifi.
    Try your Recovery partition first and if that doesn't work, use Internet Recovery.
    Clinton

  • White screen with a folder and a question mark on the folder and its blink?

    I was on my computer and it was basically frozen so I turned it offf manually. Then I tried to turn it back on and it it made the noise like it was turning on, but then there was a white screen. Then I turned it off again and it did the same thing exept that now it has a little blinking folder with a question mark in it. Then I turned it off again and it did the same thing as it didi the 1st time......HELP ME !!!
    (oh now it just turned itself off)

    You can try starting up while holding the 'Option' key down. This will hopefully present you with your drive to select from. If not, insert your Install DVD and restart with the 'C' key down. This is called booting to the DVD. When the topmenu appears, launch Disk Utility and then verify/repair both permissions and the drive itself.
    If the drive does not appear in Disk Utility ...you may have one of the faulty Seagate drives. If you are still within you standard 1 year warranty (or have Applecare) then that drive will be replaced.
    Do you have things backed up?

  • My macbook pro has white screen with flashing folder.

    my macbook pro has white screen with flashing folder.
    i called the repair services and they say its hard disk problem
    so i would like to ask everyone here if the problem would be solved if i just changed the original hard disk to a ssd myself or do i realy need to let them repair for me.
    ps : i dont have warranty

    See A flashing question mark appears when you start your Mac. I would suggest you try reinstalling OS X.
    If you are running Snow Leopard:
    Reinstall OS X without erasing the drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.
    If you are running Lion or Mountain Lion:
    Reinstalling Lion/Mountain Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • Apple Macbook 13.3" Laptop-Black 2008 2.4GHz Intel Core 2 Duo will not boot up and instead I get a grey screen with a folder and a question mark over it.

    My Apple Macbook 13.3" Laptop-Black 2008 2.4GHz Intel Core 2 Duo will not boot up and instead I get a grey screen with a folder and a question mark over it.  I've tried Option key, and Control S keys and it still will not boop up.  Can anyone help?

    If you are running Snow Leopard:
    Reinstall OS X without erasing the drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.
    If you are running Lion or later:
    Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
    Reinstall Mountain Lion or Mavericks
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it isthree times faster than wireless.

  • My MacBook has a grey screen with a folder and a question mark in the middle what does this mean?

    My MacBook has a grey screen with a folder and a question mark in the middle what does this mean?

    It means a valid system cannot be found. You need to reinstall OS X.
    If you have Snow Leopard:
    Reinstall OS X without erasing the drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.
    If you have Lion or later:
    Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
    Reinstall Mountain Lion or Mavericks
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • MacBook Pro can turn on and off, but does not start up. Stays on white screen with flashing folder icon, does not go to desktop.

    MacBook Pro is not starting up. It just stays on a white screen with a flashing folder icon. Have tried restarting while holding the Option key, and the cursor becomes visible and movable, but it does not go to the desktop.

    Hello Sonya_Rose,
    I found this article when researching the issue you describe here named A flashing question mark appears when you start your Mac found http://support.apple.com/kb/ts1440.
    Check the mouse and keyboard
    This issue might occur if a mouse or trackpad button is pressed during startup. Make sure the button isn't pressed.
    If the issue persists, shut down your Mac with its power button, disconnect any external mouse and keyboard, then turn on your Mac with its power button. If the flashing question mark issue persists, reconnect the keyboard and mouse.
    Additional steps
    If your Mac still starts to a flashing question mark, follow the steps below. If any step resolves the issue, you don't need to continue to the next one.
    Select your Mac OS X startup disk with Startup Manager by restarting and holding the Option key. After your Mac starts up, restart again to verify that the flashing question mark does not appear.
    If the issue persists, insert your Mac OS X installation disc. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc.
    MacBook Air note: On a MacBook Air, there are two options for starting up from Mac OS X media: Either connect a MacBook Air SuperDrive to the MacBook Air via the USB port and restart the computer, holding down the C key during startup, or use Remote Install Mac OS X to startup from a system software DVD that's located on a partner computer. Once started up from Mac OS X media, skip to step 3.
    Restart the computer, then hold the C key during startup.
    From the Utilities menu, choose Disk Utility. Don't click Continue.
    Select your Mac OS X disk (named "Macintosh HD" by default) in the left side of the Disk Utility window.
    Click the First Aid tab.
    Click Repair Disk to verify and repair any issues with your Mac OS X startup disk.
    After repairing the disk, try to start up normally.
    Important: If Disk Utility finds issues it cannot repair, you may need to back up as much of your data as possible (or use Time Machine to back up to a different disk), then erase the disk and reinstall Mac OS X. You should back up important files and data before erasing a drive. Erasing deletes everything on the hard disk (including things on your desktop). Also, you can install Mac OS X onto an external disk, start from the external disk, and use Migration Assistant to transfer items from your usual internal Mac OS X startup disk to the external disk, then erase the internal disk and reinstall Mac OS X.
    If the issue persists, and Disk Utility didn't find any irreparable issues, quit Disk Utility, quit the Installer, select your disk when prompted, and restart.
    If the issue continues, reset PRAM. Note: After resetting PRAM, if the computer starts up normally, reselect the startup disk in the Startup Disk preferences.
    If none of these steps resolve the issue, start up from the Mac OS X Installation disc and reinstall Mac OS X.
    Regards,
    Sterling

  • Macbook Air - White/Grey Screen with a folder and a question mark

    Out of the blue , my macbook air stopped starting up and strted to show me a white/grey screen with nothing but a folder and a question mark . After searching on the internet for solutions and trying to reset my PRAM setting , it still wouldn't boot up . I opened up disk utility and going through internet recovery , I ran the first aid verification on my MAC OS X Base System and it said that it found no problems . I can't restore or erase by the way and i really wouldn't erase my files as I have very important files on my mac . Moving on , I tried to reinstall OS X , but apperently it needs a disk to install OS x on and since none appear , I tried using an USB . After creating a partition and erasing everything on my USB , not happy about that  , it wasn't big enough for the OS . So now I am basically stuck in the mac white screen Limbo .
    Any sort of help would be fantastic and please do keep in mind that this is a macbook air and I do not have a place to put DVDs into . All I have read on different forum pages didn't help so i decided that it would be a good idea to create my very own thread . I am not very sure about the Mountain Lion version ,but I am not very sure that it matters .

    Out of the blue , my macbook air stopped starting up and strted to show me a white/grey screen with nothing but a folder and a question mark . After searching on the internet for solutions and trying to reset my PRAM setting , it still wouldn't boot up . I opened up disk utility and going through internet recovery , I ran the first aid verification on my MAC OS X Base System and it said that it found no problems . I can't restore or erase by the way and i really wouldn't erase my files as I have very important files on my mac . Moving on , I tried to reinstall OS X , but apperently it needs a disk to install OS x on and since none appear , I tried using an USB . After creating a partition and erasing everything on my USB , not happy about that  , it wasn't big enough for the OS . So now I am basically stuck in the mac white screen Limbo .
    Any sort of help would be fantastic and please do keep in mind that this is a macbook air and I do not have a place to put DVDs into . All I have read on different forum pages didn't help so i decided that it would be a good idea to create my very own thread . I am not very sure about the Mountain Lion version ,but I am not very sure that it matters .

  • My apple computer has a white screen with a file and a question mark

    I have a white screen with a ? in a file.  I have tried holding the option,command, P R buttons while turning it on.  No help  Does anyone have anymore ideas?

    The flashing question mark says, " I cannot find the Startup Disk you said to use."
    Hold down the Option key while starting up. This should cause your Mac to draw an Icon for each bootable device.
    If none are drawn, you Startup Disk has been damaged.
    If Recovery_HD is shown, choose that, launch Disk Utility, select your Macintosh_HD, and ( Repair Disk ).

  • My 2011 iMac wont boot up and stuck on white screen with flashing folder and question mark ???

    Im running Lion OS and I made update after it asks me to restart the iMac when i pressed restart it never boots again :S please help and how i can get my data back

    Try starting the it by holding down the shift key (safe mode) if it starts then check your hard drive with disk utility. Also repair your disk permissions.  If you are unable to start the computer try Lion recovery mode. 

  • White screen with a folder and a '?' ...

    Hi
    I bought my iMac in 2008 and it has work fine and remained just as fast as it was when i bought it unitill last night. I went to watch a film and it failed to load up quicktime and then froze. I turned it off then back on and was given a white screen with a folder and a question mark inside it. At this point i turned it back off again and left it. I found out that this screen is refered to as 'The Screen Of Death' and usually indicates that the Hard Drive is dead.
    Once i had left the iMac for about 10/15 minuets i switched it back on. It loaded my Mac but very slow. Everything is still there but continues to be slow and will crash completely if i open any programme.
    In other cases that i have read the posters say that they cannont get the mac to boot at all once they have seen the white screen. I was wondering if what has happened to me is something different or may just be the fact that its a run up to the inevitable.
    Any information on the matter would be great.
    Thank You

    Hi Brettus and welcome to the Apple Discussions.
    This would be a good time for a backup if you can do so.
    You could try to boot from the install disk that came with your iMac, startup holding the C key until after the tone. Then choose the language, go to utilities, first aid, disk utility and run repair disk. See if that finds damage to the file systems.
    If it comes back ok, reboot normally on the hard drive and then run dis utility from the hard drive and repair permissions.
    If you are unable to startup or have more problems, you probably have a failed or failing hard drive.

  • HT1553 I did the back up as instructed... Installed a larger hard drive and followed the restore instructions... Now I get a white screen with a folder icon and blinking question mark. When trying to set startup with new drive I get a bless tool error...

    I did the back up as instructed... Installed a larger hard drive and followed the restore instructions... Now I get a white screen with a folder icon and blinking question mark. When trying to set startup with new drive I get a bless tool error... Help!!

    If you have installed a new hard drive , you will need to have formatted it in Disk Utility correctly. This may explain your problem.
    Boot  into your 10.6 Install disk again at the top menubar > Utilities > select Disk utility and in there select your new hard drive, and select the tab Erase and choose to make the format as  Mac OS Extended Journaled. When that is finished look in the main window to make sure that the partition map scheme says GUID Partition Table.
    Now go to the Restore tab and reinstall from your backup.

  • White screen with flashing file icon with question mark mean

    What does this mean.   We are getting a white screen with flashing file icon with question mark inside the file. 

    It almost certainly means it can't find a bootable volume (one with OS X on it).
    Which means most likely you will have to find your original system installation DVD and install it. Then you should figure out what caused the problem.
    Read this to diagnose it before resorting to reinstalling the OS:
    http://support.apple.com/kb/TS1440
    Excerpt:
    Additional steps
    If your Mac still starts to a flashing question mark, follow the steps below. If any step resolves the issue, you don't need to continue to the next one.
    Select your Mac OS X startup disk with Startup Manager by restarting and holding the Option key. After your Mac starts up, restart again to verify that the flashing question mark does not appear.
    If the issue persists, insert your Mac OS X installation disc. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc.
    MacBook Air note: On a MacBook Air, there are two options for starting up from Mac OS X media: Either connect a MacBook Air SuperDrive to the MacBook Air via the USB port and restart the computer, holding down the C key during startup, or use Remote Install Mac OS X to startup from a system software DVD that's located on a partner computer. Once started up from Mac OS X media, skip to step 3.
    Restart the computer, then hold the C key during startup.
    From the Utilities menu, choose Disk Utility. Don't click Continue.
    Select your Mac OS X disk (named "Macintosh HD" by default) in the left side of the Disk Utility window.
    Click the First Aid tab.
    Click Repair Disk to verify and repair any issues with your Mac OS X startup disk.
    After repairing the disk, try to start up normally.
    Important: If Disk Utility finds issues it cannot repair, you may need to back up as much of your data as possible (or use Time Machine to back up to a different disk), then erase the disk and reinstall Mac OS X. You should back up important files and data before erasing a drive. Erasing deletes everything on the hard disk (including things on your desktop). Also, you can install Mac OS X onto an external disk, start from the external disk, and use Migration Assistant to transfer items from your usual internal Mac OS X startup disk to the external disk, then erase the internal disk and reinstall Mac OS X.
    If the issue persists, and Disk Utility didn't find any irreparable issues, quit Disk Utility, quit the Installer, select your disk when prompted, and restart.
    If the issue continues, reset PRAM. Note: After resetting PRAM, if the computer starts up normally, reselect the startup disk in the Startup Disk preferences.
    If none of these steps resolve the issue, start up from the Mac OS X Installation disc and reinstall Mac OS X.

  • White screen with flashing question mark

    AAll I get is white screen with flashing question mark.  I've inserted OS disc but it won't run.  Can anyone help plz?

    A flashing question mark or globe appears when you start your Mac

Maybe you are looking for

  • A/R balance and outstanding checks per customer

    Hi Experts, Is there a way to query to get the information as to the A/R balance and the Outstanding checks of a customer? Columns would be document number, document date, Customer Name, A/R balance, Outstanding checks and Total. Parameters will be d

  • Problem with MSS Launchpad

    Hello folks,                 We are facing some problem with MSS Launchpad after the service pack, we have checked sicf, lpd_cust and done most of the troubleshooting steps,reached to point where we found table  T77MWBFCD and changed the URL value he

  • Wireless tv to imac, wireless tv to imac

    Is it possible to send wireless tv signals to an imac?

  • Using XBOX 360 with FIOS - How do you get it to be on TV

    Just got FIOS and we plugged in the XBOX into the cable box using component cables and do not know what buttons to push so that we can use the XBOX.  Tried pressing Input on the remote to no avail.  What do we do? Thanks

  • Deploying applets with deployjava.js question

    Hi, I'm using deployjava.js and by and large it appears to be working well. The one thing that's bugging a few customers is that the very first time that we install Java on IE on Windows; after you accept the Activex control in the IE security bar yo