Who Create database in sdcard?
Hi, friends I type from Brazil and need help.
I need create one database SQLite in the sdcard
is it possible?
Thanks, suggestions welcome.
tell me the step<br>Read my post above, but for more info, read the following doc :<br>
Moving and Renaming Tablespaces: Example<br>
<br>
Nicolas.
Similar Messages
-
Unable to Load Database/Unable to create database.
RoboHelp 6.0 on my PC is suddenly unable to open existing
projects or create new ones. The problem is not in the projects, as
other people can unzip the same set of files and open them with
RoboHelp on their PCs.
The Details:
When attempting to open an existing project (any project
whether in version control or not), I get the message " Open
project was cancelled or the application was unable to load
database for..."
I found the article that says to delete the CPD and XPJ files
and then to use the Edit option to open the HHP file so that
RoboHelp will recreate the two files. When I try that, I get the
message "Unable to create database. Check that the directory is not
read-only." It's
not read-only.
When I attempt to create a new project, the application acts
like it is going to create one, but it just creates a project
folder without the new first topic and then repeats the New Project
Wizard window that prompts for title, etc. It will keep creating
folders and returning to this window in a loop without ever really
creating a project.
RoboSource Control is functioning normally, by the way.
I have uninstalled and reinstalled RH 6 several times, and
have even uninstalled RH 6 and installed to RH 5 just to see if it
could open projects, which it does with no problems. After that
test, I uninstalled RH 5 and reinstalled RH 6, only to encounter
the same problem all over again.
This started happening after I uninstalled other unrelated
software and received a message that some Service Pack 2 files had
been changed and prompting me to insert the Service Pack 2 CD,
which I don't have. This is because our IT department pre-builds
our systems from an image and then distributes job-specific
applications over the network. IT tried repairing Service Pack 2,
but that didn't work. I'd like to uninstall and reinstall Service
Pack 2, but the IT person says it's too risky on a system that was
built from an image.
We would like to find out
which files RoboHelp is looking for when it launches a
project so we can replace those files manually. Does anyone
know what they are or have another suggestion that might fix the
problem?
Otherwise, I am stuck having to allow IT to rebuild my
system. That means reinstalling and reconfiguring everything on it,
just as if I were upgrading to a new PC. This can take a whole work
week. However, I have already spent close to a work week on this
problem, so maybe rebuilding would save time in the long
run.Problem Resolution = HHA.dll
For anyone who might be interested in the resolution to this
issue, we did rebuild my PC and reinstall all of my software. The
RoboHelp installation "complained" that I did not have HTML Help
Workshop on my system and told me to download version 1.4 from
Microsoft. I did have HTML Help Workshop..it's in my programs list.
(It's not listed in programs on my co-workers' PCs, and they were
not having problems, by the way.) But to make RH happy, I
uninstalled the workshop and tried to install the version from
Microsoft. But a message informed me that I already had a newer
version of the workshop on my system, and I was back where I
started. I could open projects, but there were weird problems.
Selecting Topic Properties was met with an error message, and when
the properties window opened, I could only see whatever template
was assigned (or none if the topic had lost its template), and
there was an extra section for Oracle help.
So I started dinking around in the registry to see if I could
get rid of any traces of the workshop so I could install the
version RH wanted or to find any other clues to my problem. Under
HTMLHelpAuthor, there was a reference to an HHA.dll file located in
C:\WINDOWS\system32...only the file did not exist on my system.
(Remember that my original problem was that some Service Pack 2
files were either modified or missing.) So I did a Google search on
that file name and found out that HTML Help Workshop is included in
newer Windows operating systems, but that people used to have to
get HTML Help Workshop from Microsoft, and that some people had
made the mistake of just putting the HHA.dll file into the
C:WINDOWS\system32 folder without also installing HTML Help
Workshop. At this point it was obvious that I needed the HHA.dll,
so I got it from a co-worker's PC. (Looking at the registry
entries, I can also see that my system was built with a slightly
different version of the operating system than my co-workers have.)
Adding the HHA file to my system solved the problem. All
projects but one were fine; one was still exhibiting the strange
behavior. I fixed it by going back to the RoboHelp 5 version of the
project and re-converting it to RoboHelp 6.
I suspect that if I had known about the HHA.dll file before
we rebuilt the PC, I could have solved the problem without going
through that painful process. That is why I thought I should post
the solution even though it was after the rebuild. -
How to find out who created a custom table
I have searched the forum but didn't find an answer so thought I would put it out here.
I have a bunch of custom tables that have been created and not assigned to table groups. Some are SM30 wrappers and some aren't. They are all defaulted to &NC& which is a no-no to assign to roles. My question is, how can I see who created these tables so that I can contact them and educate them on table groups? I can't seem to figure this out.
For instance, I have a custom t-code that calls a custom view and the view is assigned to &NC& in TDDAT.
Any help appreciatedBobbi,
Try SE15->ABAP Dictionary->Database Tables->"enter table name" and execute->select table and view->Attributes Tab->Last changed on/by. Field "Last changed on/by" will give you an idea who the last user that made modification on this table.
Good Luck
-John N. -
I'm getting the following errors while trying to provision a PS 2010 PWA on our SharePoint 2010 farm. Our PS instance has been working for a while now, and houses two other PWAs. But today,
when trying to create this one, I get "Failed - see the Application event Log" and the following in the Event Viewer:
Log Name: Application
Source: Microsoft-SharePoint Products-Project Server
Date: 4/2/2014 2:09:08 PM
Event ID: 6980
Task Category: Provisioning
Level: Error
Keywords:
User: DOMAIN\DB_Access
Computer: server
Description:
Provisioning 'PWA/SDN': To create databases we need dbcreator and securityadmin server roles on servers 'DB1' and 'DB1'.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-SharePoint Products-Project Server" Guid="{b2178104-1b5b-4c20-8c8f-960678ced9e5}" />
<EventID>6980</EventID>
<Version>14</Version>
<Level>2</Level>
<Task>20</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2014-04-02T19:09:08.225Z" />
<EventRecordID>1676727</EventRecordID>
<Correlation ActivityID="{90131653-B0A4-4FAF-A43C-7DF07CBC3332}" />
<Execution ProcessID="11040" ThreadID="12384" />
<Channel>Application</Channel>
<Computer>sharepoint</Computer>
<Security UserID="S-1-5-21-2280669542-4145173436-3058324265-4222" />
</System>
<EventData>
<Data Name="string0">PWA/SDN</Data>
<Data Name="string1">DB1</Data>
<Data Name="string2">DB1</Data>
</EventData>
</Event>
Log Name: Application
Source: Microsoft-SharePoint Products-Project Server
Date: 4/2/2014 2:09:08 PM
Event ID: 6993
Task Category: Provisioning
Level: Error
Keywords:
User: DOMAIN\DB_Access
Computer: sharepoint
Description:
Provisioning 'PWA/SDN': Failed to provision databases. An exception occurred: To create databases we need dbcreator and securityadmin server roles on servers..
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-SharePoint Products-Project Server" Guid="{b2178104-1b5b-4c20-8c8f-960678ced9e5}" />
<EventID>6993</EventID>
<Version>14</Version>
<Level>2</Level>
<Task>20</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2014-04-02T19:09:08.225Z" />
<EventRecordID>1676728</EventRecordID>
<Correlation ActivityID="{90131653-B0A4-4FAF-A43C-7DF07CBC3332}" />
<Execution ProcessID="11040" ThreadID="12384" />
<Channel>Application</Channel>
<Computer>sharepoint</Computer>
<Security UserID="S-1-5-21-2280669542-4145173436-3058324265-4222" />
</System>
<EventData>
<Data Name="string0">PWA/SDN</Data>
<Data Name="string1">To create databases we need dbcreator and securityadmin server roles on servers.</Data>
</EventData>
</Event>
Log Name: Application
Source: Microsoft-SharePoint Products-Project Server
Date: 4/2/2014 2:09:08 PM
Event ID: 6958
Task Category: Provisioning
Level: Error
Keywords:
User: DOMAIN\DB_Access
Computer: sharepoint
Description:
Provisioning 'PWA/SDN': Database provisioning failed.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-SharePoint Products-Project Server" Guid="{b2178104-1b5b-4c20-8c8f-960678ced9e5}" />
<EventID>6958</EventID>
<Version>14</Version>
<Level>2</Level>
<Task>20</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2014-04-02T19:09:08.225Z" />
<EventRecordID>1676729</EventRecordID>
<Correlation ActivityID="{90131653-B0A4-4FAF-A43C-7DF07CBC3332}" />
<Execution ProcessID="11040" ThreadID="12384" />
<Channel>Application</Channel>
<Computer>sharepoint</Computer>
<Security UserID="S-1-5-21-2280669542-4145173436-3058324265-4222" />
</System>
<EventData>
<Data Name="string0">PWA/SDN</Data>
</EventData>
</Event>
Log Name: Application
Source: Microsoft-SharePoint Products-Project Server
Date: 4/2/2014 2:09:08 PM
Event ID: 6971
Task Category: Provisioning
Level: Error
Keywords:
User: DOMAIN\DB_Access
Computer: sharepoint
Description:
Failed to provision site PWA/SDN with error: Microsoft.Office.Project.Server.Administration.ProvisionException: Failed to provision databases. ---> Microsoft.Office.Project.Server.Administration.ProvisionException: To create databases we need dbcreator and
securityadmin server roles on servers.
at Microsoft.Office.Project.Server.Administration.PsiServiceApplication.EnsureDatabases(ProjectProvisionSettings provset, SPSite pwaSite, String adminName, String adminEmail, ProjectDatabaseStateType& originalDatabaseState, Guid& adminGuid)
--- End of inner exception stack trace ---
at Microsoft.Office.Project.Server.Administration.PsiServiceApplication.EnsureDatabases(ProjectProvisionSettings provset, SPSite pwaSite, String adminName, String adminEmail, ProjectDatabaseStateType& originalDatabaseState, Guid& adminGuid)
at Microsoft.Office.Project.Server.Administration.PsiServiceApplication.CreateSite(ProjectProvisionSettings provset)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-SharePoint Products-Project Server" Guid="{b2178104-1b5b-4c20-8c8f-960678ced9e5}" />
<EventID>6971</EventID>
<Version>14</Version>
<Level>2</Level>
<Task>20</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2014-04-02T19:09:08.226Z" />
<EventRecordID>1676730</EventRecordID>
<Correlation ActivityID="{90131653-B0A4-4FAF-A43C-7DF07CBC3332}" />
<Execution ProcessID="11040" ThreadID="12384" />
<Channel>Application</Channel>
<Computer>sharepoint</Computer>
<Security UserID="S-1-5-21-2280669542-4145173436-3058324265-4222" />
</System>
<EventData>
<Data Name="string0">PWA/SDN</Data>
<Data Name="string1">Microsoft.Office.Project.Server.Administration.ProvisionException: Failed to provision databases. ---> Microsoft.Office.Project.Server.Administration.ProvisionException: To create databases we need dbcreator and securityadmin
server roles on servers.
at Microsoft.Office.Project.Server.Administration.PsiServiceApplication.EnsureDatabases(ProjectProvisionSettings provset, SPSite pwaSite, String adminName, String adminEmail, ProjectDatabaseStateType& originalDatabaseState, Guid& adminGuid)
--- End of inner exception stack trace ---
at Microsoft.Office.Project.Server.Administration.PsiServiceApplication.EnsureDatabases(ProjectProvisionSettings provset, SPSite pwaSite, String adminName, String adminEmail, ProjectDatabaseStateType& originalDatabaseState, Guid& adminGuid)
at Microsoft.Office.Project.Server.Administration.PsiServiceApplication.CreateSite(ProjectProvisionSettings provset)</Data>
</EventData>
</Event>
Anybody ever get any events like this before? I'm not finding much or nothing on Google or on other forums, so I thought I would run it past and see if anyone has experienced anything of a similar
nature. And yes, the farm account obviously has creator/secadmin permissions, at this point of our deployment....
I look forward to any and all feedback. Thanks and good afternoon!I figured out the answer to this myself. For those few who might run into something akin to my error...
During the off-hours of where I work, I re-applied the farm account credentials to all dB server VM SQL services that had the account for a log-on (i.e., MSSQLSERVER, SQLSERVERAGENT, etc.) as well as all SharePoint services on our WFE/App Server VM (a two
server farm is what we host), in that order. Then I rebooted the dB server first, followed by the SharePoint server. Upon coming back, everything was working fine again. I was able to provision a site, no probelm, and it seemed to even be a little snappier
when doing so.
One note: doing this procedure gave me a "One or more services have started or stopped unexpectedly" error in the Health Analyzer, for the SPTimerV4 service. When you get this, simply enter into the item and click on "Reanalyze Now;" this will quickly clear
the error out of the Analyzer, and all should be right with the world! :) -
Cannot create database in RHEL5(beta 2)
Hi,
I am trying to install the database 10.2.0.1 in the RHEL5 (beta 2), all step was well, but at created database, choiced all parameter, after click the "OK" button on the parameter confirmation window, following error was displayed. If I run dbca manually, the error is same.
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : 11 occurred at PC=0x4A802D35
Function=XFreeFontSet+0x15
Library=/usr/lib/libX11.so.6
Current Java thread:
at sun.awt.motif.X11InputMethod.disposeXIC(Native Method)
at sun.awt.motif.X11InputMethod.disposeImpl(X11InputMethod.java:662)
- locked <0xa88b9d58> (a sun.awt.motif.X11InputMethod)
at sun.awt.motif.X11InputMethod.dispose(X11InputMethod.java:689)
Elapsed Time = 326
# The exception above was detected in native code outside the VM
# Java VM: Java HotSpot(TM) Client VM (1.4.2_08-b03 mixed mode)
# An error report file has been saved as hs_err_pid2961.log.
# Please refer to the file for further information.
bin/dbca: line 158: 2961 Aborted $JRE_DIR/bin/java -Dsun.java2d.font.DisableAlgorithmicStyles=true -DORACLE_HOME=$OH -DDISPLAY=$DISPLAY -DJDBC_PROTOCOL=thin -mx128m -classpath $CLASSPATH oracle.sysman.assistants.dbca.Dbca $ARGUMENTS
How resolve the problem?
Thanks!I have not tried it yet myself. However, Tim Hall has a step-by-step at
http://www.oracle-base.com/articles/10g/OracleDB10gR2InstallationOnRHEL5.php
The challenge: when crashes occur, you will need to dewtermine whether they are due to Oracle, due to the untested RedHat, due to the Oracle-RedHat mix. And you will be on your own for a while. <g>
Message was edited by:
Hans Forbrich
Amazing what one can find with Google. Even more amazing that one doesn't even have to learn how to Google ... just ask others who will do it for you. <g> -
hi,
it says that when you're creating a database, you have to log into the database as sysdba, and then do create database...but how can you log in to the database when it hasn't even yet been created? I mean, how can you connect as sysdba, because the database does not even yet exist and therefore neither should this privilege?
thanks.Once you are in the nomount stage,you need to issue the command
connect / as sysdba
Here the "/" implicitly connects you as Sys schema..
There's nothing implicit about this at all. The command 'connect / as sysdba' means "please connect me to an instance, authenticating me using OS authentication methods, and I want to claim the SYSDBA system privilege whilst doing so".
Exactly the same effect can be achieved by issuing the command "connect sys/fred as sysdba". This simply means "connect me to an instance, authenticating me with an Oracle password file, and I want to claim the SYSDBA system privilege whilst doing so".
In neither case is the connection to the SYS schema "implicit", since the request for SYSDBA privileges is explicit in both -and the only "schema" that can ever acquire SYSDBA privileges is SYS's.
The only difference between the two forms of the connection command, in fact, is whether to use OS or password file authentication.
This fact makes it all the more unfortunate that you would go on to write, "You will log in to your instance using this command and than will issue ,create database command.Oracle maintains the Sys user's password in a password file."
If, as you say, Oracle is maintaining something in a password file, then the connection command you actually gave (which very deliberately didn't mention a password!) shouldn't be used (the idea of a password file is that you should supply the password when connecting!). If you're going to use the password-less form of the connection string, then the one thing you can say with some confidence is that there is NOT a password file (or, at least, that its existence is entirely optional).
Your answer also completely misses the point that I might well connect as follows: connect hjr/dizwell as sysdba. That's password file authentication, requesting the SYSDBA system privilege. I will end up connected using hjr's credentials -but a 'show user' in SQL*Plus will STILL show me connected as SYS.
A more meaningful answer to the original question (of "how can you log in to the database when it hasn't even yet been created") is very simple:
1. No-one ever logs onto a database. Ever.
2. People only ever connect to an instance.
3. Usually, the database tables (USER$, for example) are used to check on user names and passwords and privileges to work out whether you are allowed to connect to an instance or not. That's called 'data dictionary authentication' -and obviously can only happen once the database exists, those tables exist and can be read and accessed properly ...post-database-creation, in other words, and post-database-opening.
4. A 'privileged user' is one who is allowed to perform the five privileged actions (which are: startup, shutdown, backup, recover and create)
5. Privileged users are never authenticated by the data dictionary, at least partly because of the Catch22 situation you describe: how can we use a data dictionary table to authenticate whether you are allowed to create (or startup!) the very thing needed to store that table in the first place
6. Privileged users are therefore always only ever authenticated either by the OS (membership by an ordinary user of the OS of an appropriate OS group -such as dba on Unix or ORA_DBA on Windows); or by a password file
7. OS group membership or password files are external to the database -that is, their existence has nothing to do with whether the database exists or has been opened for business.
8. Therefore, privileged users can be authenticated whether a database exists or has been opened for business or not.
9. There is actually only ever one privileged user: SYS. Therefore, you can connect as SYS regardless of whether a database exists or has been opened for business or not.
And how you connect as SYS (which of the two authentication methods you want to use, in other words -and which is the only thing your answer concerned itself with) is completely and utterly irrelevant to all of that. -
Hi All,
Do you guys know how can I find out who created or which id created the Essbase app. Is there any file where can i go and check to see?
I am on UNIX and 11.1.2.2
Thanks all.Don't think that information is kept anywhere.
This is how the log will look like during app and db creation
[Fri Aug 02 13:35:55 2013]Local/ESSBASE0///9036/Info(1051001)
Received client request: Get Extended Application Info (from user [celvin@Native Directory])
[Fri Aug 02 13:36:04 2013]Local/ESSBASE0///8072/Info(1042059)
Connected from [fe80::a531:1592:875b:3873]
[Fri Aug 02 13:36:04 2013]Local/ESSBASE0///8072/Info(1051001)
Received client request: MaxL: Execute (from user [celvin@Native Directory])
[Fri Aug 02 13:36:06 2013]Local/ESSBASE0///5432/Info(1042059)
Connected from [fe80::a531:1592:875b:3873]
[Fri Aug 02 13:36:15 2013]Local/ESSBASE0///8072/Info(1051061)
Application test loaded - connection established
[Fri Aug 02 13:36:15 2013]Local/ESSBASE0///8072/Info(1054027)
Application [test] started with process id [4324]
[Fri Aug 02 13:36:15 2013]Local/ESSBASE0///8072/Info(1056010)
Application test created
[Fri Aug 02 13:37:22 2013]Local/ESSBASE0///6972/Info(1051001)
Received client request: MaxL: Define (from user [celvin@Native Directory])
[Fri Aug 02 13:37:22 2013]Local/ESSBASE0///6972/Info(1051001)
Received client request: MaxL: Fetch (from user [celvin@Native Directory])
[Fri Aug 02 13:37:28 2013]Local/ESSBASE0///4520/Info(1042059)
Connected from [fe80::a531:1592:875b:3873]
[Fri Aug 02 13:37:28 2013]Local/ESSBASE0///4520/Info(1051001)
Received client request: MaxL: Execute (from user [celvin@Native Directory])
[Fri Aug 02 13:37:28 2013]Local/ESSBASE0///4520/Info(1054014)
Database test loaded
[Fri Aug 02 13:37:28 2013]Local/ESSBASE0///4520/Info(1056020)
Database test.test created
Regards
Celvin
http://www.orahyplabs.com -
Installation stuck at Create database schema Phase 13 of 27
Hi
I am installing the Netweaver 7.01 SP3 and have already removed it completely after getting stuck at the same installation step. Do not know what is going wrong. A small extract of the log is shown below. Any advice on how to proceed will be helpful. I know when einstalling it has to be removed completely which I did using uninstallation and then clean up tool. But again it is stooping at the same step. I had let it run more almost two days but of no use. My system configuration is good enough with 2GB RAM etc.
INFO 2009-03-12 16:52:00.443 [synxcpath.cpp:807]
CSyPath::createDirectory()
Creating directory C:\sapdb.
INFO 2009-03-12 16:52:00.458 [synxcpath.cpp:807]
CSyPath::createDirectory()
Creating directory C:\sapdb\NSP.
INFO 2009-03-12 16:52:00.458 [synxcpath.cpp:807]
CSyPath::createDirectory()
Creating directory C:\sapdb\NSP\saplog.
INFO 2009-03-12 16:52:00.474 [synxcpath.cpp:807]
CSyPath::createDirectory()
Creating directory E:\sapdb\NSP\sapdata.
INFO 2009-03-12 16:52:01.67 [sixxcstepexecute.cpp:790]
Execute step sdb_create_db_instance of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_ADA_DB|ind|ind|ind|ind|6|0|SdbPreInstanceDialogs|ind|ind|ind|ind|4|0|SdbInstanceDialogs|ind|ind|ind|ind|1|0|SDB_INSTANCE_CREATE|ind|ind|ind|ind|0|0
File sapdb.inf does exist. Will use the commands in file sapdb.inf.
INFO 2009-03-12 16:52:06.544 [sixxcstepexecute.cpp:790]
Execute step sdb_init_instance_type of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_ADA_DB|ind|ind|ind|ind|6|0|SdbPreInstanceDialogs|ind|ind|ind|ind|4|0|SdbInstanceDialogs|ind|ind|ind|ind|1|0|SDB_INSTANCE_CREATE|ind|ind|ind|ind|0|0
INFO 2009-03-12 17:12:38.722 [sixxcstepexecute.cpp:790]
Execute step CheckDBUnicode of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_ADA_DB|ind|ind|ind|ind|6|0|Sdb_Schema_Dialogs|ind|ind|ind|ind|5|0|Sdb_Schema|ind|ind|ind|ind|1|0
INFO 2009-03-12 17:12:39.883 [sixxcstepexecute.cpp:790]
Execute step CreateDbSchema of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_ADA_DB|ind|ind|ind|ind|6|0|Sdb_Schema_Dialogs|ind|ind|ind|ind|5|0|Sdb_Schema|ind|ind|ind|ind|1|0
Also see log browser from the installation window............................
Please see below as it is geeting stuck at
component ><![CDATA[Run ABAP Reports]]></component><currentprogress current="105" total="216"/>
Mar 12, 2009 5:12:35 PM [Info]: com.sap.sdt.sapinst.rapi.connector.SAPinstConnector [Thread[SAPinstCommLink,5,main]]: Received: <?xml version="1.0" encoding="UTF-8"?><sapinstgui version="1.0"><dialog sid="diProgress" progress="true" windowtitle="SAPinst vtaneja2@skumar278-1: SAP NetWeaver 7.0 SR1 including Enhancement Package 1 > SAP Application Server ABAP > MaxDB > Central System > Central System"><title>Task Progress</title><description>Task is running</description><status><![CDATA[]]></status><component current="true"><![CDATA[Create users for SAP system]]></component><component current="true"><![CDATA[Install common system files]]></component><component current="true"><![CDATA[Unpack SAP archives]]></component><component current="true"><![CDATA[Install SAP Cryptographic component><component ><![CDATA[Perform MaxDB post-load activities]]></component><component ><![CDATA[Import MaxDB statistics]]></component><component ><![CDATA[Install central instance]]></component><component ><![CDATA[Start central services instance]]></component><component ><![CDATA[Start instance]]></component><component ><![CDATA[ABAP post installation activities]]></component><component ><![CDATA[Check DDIC password]]></component><component ><![CDATA[Run ABAP Reports]]></component><currentprogress current="99" total="216"/>
<button sid="btPREV" default="false" enabled="false" ><caption>< &Back</caption><action>ACTION_PREV</action><tooltiphelp><![CDATA[]]></tooltiphelp></button><button sid="btNEXT" enabled="false" ><caption>&Next</caption><action sendValuesBack="false">ACTION_NEXT</action><tooltiphelp></tooltiphelp></button></dialog></sapinstgui>
Mar 12, 2009 5:12:35 PM [Info]: com.sap.sdt.sapinst.rapi.connector.SAPinstConnector [Thread[SAPinstCommLink,5,main]]: Received: <?xml version="1.0" encoding="UTF-8"?><sapinstgui version="1.0"><dialog sid="diProgress" progress="true" windowtitle="SAPinst [Setup database connection for user SKUMAR278-1\nspadm]]></component><component ><![CDATA[Setup database connection for user skumar278-1\SAPServiceNSP]]></component><component ><![CDATA[Perform MaxDB pre-load activities]]></component><component ><![CDATA[Import ABAP]]></component><component ><![CDATA[Post load activities]]></component><component ><![CDATA[Perform MaxDB post-load activities]]></component><component ><![CDATA[Import MaxDB statistics]]></component><component ><![CDATA[Install central instance]]></component><component ><![CDATA[Start central services instance]]></component><component ><![CDATA[Start instance]]></component><component ><![CDATA[ABAP post installation activities]]></component><component ><![CDATA[Check DDIC password]]></component><component ><![CDATA[Run ABAP Reports]]></component><currentprogress current="100" total="216"/>
<button sid="btPREV" default="false" enabled="false" >
vtaneja2@skumar278-1: SAP NetWeaver 7.0 SR1 including Enhancement Package 1 > SAP Application Server ABAP > MaxDB > Central System > Central System"><title>Task Progress</title><description>Task is running</description><status><![CDATA[]]></status><component CDATA[Prepare database schema for ABAP]]></component><component current="true"><![CDATA[Create database schema]]></component><component ><![CDATA[Create sequence for the ABAP user]]></component><component ><![CDATA[Setup database connection for user SKUMAR278-1\nspadm]]></component><component ><![CDATA[Setup database connection for user skumar278-1\SAPServiceNSP]]></component><component ><![CDATA[Perform MaxDB pre-load activities]]></component><component ><![CDATA[Import ABAP]]></component><component ><![CDATA[Post load activities]]></component><component ><![CDATA[Perform MaxDB post-load activities]]></component><component ><![CDATA[Import MaxDB statistics]]></component><component ><![CDATA[Install central instance]]></component><component ><![CDATA[Start central services instance]]></component><component ><![CDATA[Start instance]]></component><component ><![CDATA[ABAP post installation activities]]></component><component ><![CDATA[Check DDIC password]]></component><component ><![CDATA[Run ABAP Reports]]></component><currentprogress current="104" total="216"/>
[Install central instance]]></component><component ><![CDATA[Start central services instance]]></component><component ><![CDATA[Start instance]]></component><component ><![CDATA[ABAP post installation activities]]></component><component ><![CDATA[Check DDIC password]]></component><component ><![CDATA[Run ABAP Reports]]></component><currentprogress current="105" total="216"/>
<button sid="btPREV" default="false" enabled="false" ><caption>< &Back</caption><action>ACTION_PREV</action><tooltiphelp><![CDATA[]]></tooltiphelp></button><button sid="btNEXT" enabled="false" ><caption>&Next</caption><action sendValuesBack="false">ACTION_NEXT</action><tooltiphelp></tooltiphelp></button></dialog></sapinstgui>
Mar 12, 2009 5:12:39 PM [Info]: com.sap.sdt.sapinst.rapi.connector.SAPinstConnector [Thread[SAPinstCommLink,5,main]]: Received: <?xml version="1.0" encoding="UTF-8"?><sapinstgui version="1.0"><update><updateitem><dialogstatus><![CDATA[ ]]></dialogstatus></updateitem></update></sapinstgui>
Mar 12, 2009 5:38:16 PM [Info]: com.sap.sdt.sapinst.rapi.connector.SAPinstConnector [Thread[AWT-EventQueue-0,6,main]]: Sent: <?xml version="1.0"?><sapinstlog severity="FLOW TRACE" filename="" version="1.0"/>
Mar 12, 2009 5:38:16 PM [Info]: com.sap.sdt.sapinst.rapi.connector.SAPinstConnector [Thread[SAPinstCommLink,5,main]]: Received: <?xml version="1.0" encoding="UTF-8"?><sapinstlog version="1.0" append="false" filename="C:\Program Files\sapinst_instdir\NW701\AS-ABAP\ADA\CENTRAL\sapinst_dev.log"/>
Mar 12, 2009 5:43:59 PM [Info]: com.sap.sdt.sapinst.rapi.connector.SAPinstConnector [Thread[AWT-EventQueue-0,6,main]]: Sent: <?xml version="1.0"?><sapinstlog logoff="true" filename="" version="1.0"/>
Mar 12, 2009 6:08:17 PM [Info]: com.sap.sdt.sapinst.rapi.connector.SAPinstConnector [Thread[AWT-EventQueue-0,6,main]]: Sent: <?xml version="1.0"?><sapinstlog logoff="true" filename="" version="1.0"/>
Mar 12, 2009 6:30:31 PM [Info]: com.sap.sdt.sapinst.rapi.connector.SAPinstConnector [Thread[AWT-EventQueue-0,6,main]]: Sent: <?xml version="1.0"?><sapinstlog logoff="true" filename="" version="1.0"/>
Thanks in advance
VikasGuess you are talking about sapinst.log file. Below are the last few lines after which it did not proceed
Do see the last step create DB schema....... The previos log was from sapinst_dev.log
Oliver I have a doubt could it be becuase of the host name.
The host name of my machine is "skumar278-1" with DNS domain name for SAP system "asiapac.globalcsc.net"
Could this be the reason for the problem i am facing i.e installation getting stuck at phase 13 Create DB schema.... Other than this I cannot see anything else which can go wrong.. Do have the DHCP server available..
The page file as per the ram settings i.e for 2 GB should be 3072 so I have set it to the same. Though
the prerequisite page shows
"For the selected services at least 7138 MB swap space are recommended. Current value: 2851 MB. (Updated 2005-06-24)"
Can this be the reason???
Also I just looked at the services file.. there are about about 4-5 different files with the name services .3 services.4 ... services.5 etc als there is no entry for port 3900 3600 & 8000.. .. do not know what to do... Please suggest..
INFO 2009-03-12 17:12:35.412
Execute step CheckDbExistence of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_ADA_DB|ind|ind|ind|ind|6|0|Sdb_Schema_Dialogs|ind|ind|ind|ind|5|0|Sdb_Schema|ind|ind|ind|ind|1|0
INFO 2009-03-12 17:12:35.726
Execute step check_dbm_dba_user_passwd of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_ADA_DB|ind|ind|ind|ind|6|0|Sdb_Schema_Dialogs|ind|ind|ind|ind|5|0|Sdb_Schema|ind|ind|ind|ind|1|0
INFO 2009-03-12 17:12:37.718
Execute step StartDb of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_ADA_DB|ind|ind|ind|ind|6|0|Sdb_Schema_Dialogs|ind|ind|ind|ind|5|0|Sdb_Schema|ind|ind|ind|ind|1|0
INFO 2009-03-12 17:12:38.722
Execute step CheckDBUnicode of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_ADA_DB|ind|ind|ind|ind|6|0|Sdb_Schema_Dialogs|ind|ind|ind|ind|5|0|Sdb_Schema|ind|ind|ind|ind|1|0
INFO 2009-03-12 17:12:39.883
Execute step CreateDbSchema of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_ADA_DB|ind|ind|ind|ind|6|0|Sdb_Schema_Dialogs|ind|ind|ind|ind|5|0|Sdb_Schema|ind|ind|ind|ind|1|0 -
Is db_name is the only parameter for creating database ? [Exper. on 32-bit]
Because of the discussion present in the following thread, I did few experiments and would you like to share with you. Hope it is a useful information for you guys.
Re: db_name & memory allocation
OS: Win XP SP2 or Windows 2000 <b>(32-bit)</b>
Oracle Version: Oracle 10gR2
System RAM: 1G
<b>Attempting to create the database CCC by specifying db_name parameter only</b>
C:\oracle\product\10.2.0\db_1\database>copy con initCCC.ora
db_name=CCC
^Z
1 file(s) copied.
<b> Starting the service </b>
C:\oracle\product\10.2.0\db_1\database>oradim -new -sid CCC -startmode m
Instance created.
C:\oracle\product\10.2.0\db_1\database>set oracle_sid=CCC
C:\oracle\product\10.2.0\db_1\database>sqlplus "/as sysdba"
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Apr 6 07:50:06 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to an idle instance.
SQL>
SQL>
SQL> startup nomount
ORACLE instance started.
Total System Global Area <b>113246208</b> bytes -- Default SGA size
Fixed Size 1247588 bytes
Variable Size 58721948 bytes
Database Buffers 50331648 bytes
Redo Buffers 2945024 bytes
<b> On seeing dynamic components size, shared pool got
33m, large pool got 0m, java pool got 25m and buffer cache
got 50m. Please check the references for these default
values. </b>
SQL> select component,current_size from v$sga_dynamic_components;
COMPONENT CURRENT_SIZE
shared pool 33554432
large pool 0
java pool 25165824
streams pool 0
DEFAULT buffer cache 50331648
KEEP buffer cache 0
RECYCLE buffer cache 0
DEFAULT 2K buffer cache 0
DEFAULT 4K buffer cache 0
DEFAULT 8K buffer cache 0
DEFAULT 16K buffer cache 0
COMPONENT CURRENT_SIZE
DEFAULT 32K buffer cache 0
ASM Buffer Cache 0
13 rows selected.
<b>Total=109051904 </b>
SQL>
create database
ERROR at line 1:
ORA-01092: ORACLE instance terminated. Disconnection forced
<b>Errors in alert log file</b>
ORA-00604: error occurred at recursive SQL level 1
<b>ORA-04031: unable to allocate 40 bytes of shared memory ("shared pool","create unique index
i_proxy_...","sql area","kksol : kksnsg")
</b>
Error 1519 happened during db open, shutting down database
USER: terminating instance due to error 1519
<b>It was thought that shared_pool memory area is not
sufficient. Then thought to know how oracle will behave on
setting sga_target parameter.</b>
<b>initCCC.ora</b>
db_name=CCC
sga_target=113m
SQL> startup nomount
ORACLE instance started.
Total System Global Area <b>121634816 bytes -- Got around 121m </b>
Fixed Size 1247636 bytes
Variable Size 54527596 bytes
Database Buffers 62914560 bytes
Redo Buffers 2945024 bytes
<b>Now create database statement got success here.
Instance got few extra Mbs of memory and oracle can create
the database.</b>
<b>Then it was thought that, why to give 121Mb even. Let exactly 113246208 bytes be devoted to the instance.</b>
initCCC.ora
db_name=CCC
sga_target=113246208 -- providing exact number of bytes as obtained in default case
SQL> startup nomount
ORACLE instance started.
Total System Global Area 113246208 bytes
Fixed Size 1247588 bytes
Variable Size 54527644 bytes
Database Buffers 54525952 bytes
Redo Buffers 2945024 bytes
SQL>
<b> Now create database statement got success here as
well. Because of sga_target, automatic shared memory
management enabled and instance was taking care of buffer
cache, shared pool, large pool, java pool and
streams_pool. In this case shared pool got 46m (greater
than default case value). Java pool and Large pool got 4
mb each and buffer cache got 54m. </b>
SQL> select component,current_size
2 from v$sga_dynamic_components;
COMPONENT CURRENT_SIZE
shared pool 46137344
large pool 4194304
java pool 4194304
streams pool 0
DEFAULT buffer cache 54525952
KEEP buffer cache 0
RECYCLE buffer cache 0
DEFAULT 2K buffer cache 0
DEFAULT 4K buffer cache 0
DEFAULT 8K buffer cache 0
DEFAULT 16K buffer cache 0
COMPONENT CURRENT_SIZE
DEFAULT 32K buffer cache 0
ASM Buffer Cache 0
13 rows selected.
<b>Total=109051904 </b>
SQL>
By providing 113246208 bytes (as in default case) of
memory to SGA by setting sga_target value, Oracle gave
extra memory to shared_pool and buffer cache than in case
of default, thus helping create database statement to get
pass. Oracle always recommends to use automatic shared
memory management by setting sga_target parameter value.
Hope this experiment provides few clues about automatic
shared memory management feature of Oracle 10g. This case
was conducted on 32-bit Oracle. It is quite possible that
create database statement might get success in 64-bit
Platform as by default Oracle will provide 84 Mb to Shared
pool. But to confirm, it has to be experimented.
References:
Shared pool
http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14237/initparams196.htm#sthref804
Large Pool
http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14237/initparams090.htm#sthref377
Java Pool
http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14237/initparams087.htm#sthref364
Buffer Cache
http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14237/initparams043.htm#sthref185Hi,
Good Work Mohammed !!!
Regards
Taj -
Error on Create Database command for Oracle 9i on Red Hat 9
Error on Create Database command
CREATE DATABASE ora9i
LOGFILE
GROUP 1 ('$HOME/ORADATA/log_01_01_ora9i.rdo') SIZE 10M,
GROUP 2 ('$HOME/ORADATA/log_02_01_ora9i.rdo') SIZE 10M
DATAFILE '$HOME/ORADATA/system_01_ora9i.dbf' SIZE 100M
AUTOEXTEND ON NEXT 50M MAXSIZE 150M
DEFAULT TEMPORARY TABLESPACE temp
TEMPFILE '$HOME/ORADATA/temp_01_ora9i.dbf' SIZE 15M
AUTOEXTEND ON NEXT 5M MAXSIZE 30M
CHARACTER SET WE81SO8859P1
NATIONAL CHARACTER SET AL16UTF16
CREATE DATABASE ora9i
ERROR at line 1:
ORA-01092:ORACLE instance terminated. Disconnection forced.
initora9i.ora file contents :
background_dump_dest=$HOME/ADMIN/BDUMP
core_dump_dest=$HOME/ADMIN/CDUMP
db_name=ora9i
db_files= 80
db_file_multiblock_read_count=8
db_block_buffers=100
shared_pool_size = 3500000
log_checkpoint_interval = 10000
processes=50
parallel_max_servers=5
log_buffer = 32768
max_dump_file_size = 10240
global_name = TRUE
control_files=$HOME/ORADATA/ctrl01.ctl
undo_management=AUTO
user_dump_dest=$HOME/ADMIN/UDUMP
-------------------------------------------------Pleae include REUSE keyword at the end of each file location as shown below...
CREATE DATABASE ora9i
LOGFILE
GROUP 1 ('$HOME/ORADATA/log_01_01_ora9i.rdo') SIZE 10M REUSE,
GROUP 2 ('$HOME/ORADATA/log_02_01_ora9i.rdo') SIZE 10M REUSE
DATAFILE '$HOME/ORADATA/system_01_ora9i.dbf' SIZE 100M REUSE
AUTOEXTEND ON NEXT 50M MAXSIZE 150M
DEFAULT TEMPORARY TABLESPACE temp
TEMPFILE '$HOME/ORADATA/temp_01_ora9i.dbf' SIZE 15M REUSE
AUTOEXTEND ON NEXT 5M MAXSIZE 30M
CHARACTER SET WE81SO8859P1
NATIONAL CHARACTER SET AL16UTF16 -
Unable to create database error
Hello all-
I've been working on a project in Robohelp7/HTML for about a
week. I come in today and try to open my project and receive the
error "Unable to create database. Check that the directory is not
read-only.". I've done the obvious of checking the folders and
files within and they are not marked read only. When I create a new
project, I receive the same error. I'm stuck at a standstill and
can't figure out why Robohelp has decided to deny me access to my
project or the ability to create new ones. I went so far as to
uninstall and reinstall, to no avail.
Has anyone encountered this? Any help would be greatly
appreciated.
ThanksThere is a topic on Opening RoboHelp Projects on my site. Rh allows you to browse to either an XPJ or HHP file but that is only as good as the last time you generated an output.
When you open with an HHP you get an option to use the XPJ or not, in which case one is created. Either way there should be an XPJ. Not sure how you have lost it.
Backup?
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge -
Phase Create Database Error in ECC 6.0 EHP5 Installation on SuSe10/Oracle11
Hi,
I have following error ecnounter During Create Databse Phase. Have applied the latest patch after Oracle Installtion.
/oracle file system has the permissions 755.
Environment : ECC 6.0 EHP5 Installation on SuSe10/Oracle11.
Please advise
sapinst_log:-
INFO 2011-08-27 20:36:38.900
Creating file /install/dev_sap_kernel_test_27_Aug_2011_20_36_38.
INFO 2011-08-27 20:36:38.901
Removed file /install/dev_sap_kernel_test_27_Aug_2011_20_36_38.
INFO 2011-08-27 20:36:38.908
Working directory changed to /install/sapinst_exe.26397.1314448526.
INFO 2011-08-27 20:36:38.915
Working directory changed to /Media/IM_LINUX_ORACLE/IM_LINUX_X86_64.
INFO 2011-08-27 20:36:38.927
Creating file /install/dev_sap_kernel_test_27_Aug_2011_20_36_38.
INFO 2011-08-27 20:36:38.927
Removed file /install/dev_sap_kernel_test_27_Aug_2011_20_36_38.
INFO 2011-08-27 20:36:38.933
Real group ID set to 1001.
INFO 2011-08-27 20:36:39.497
Creating file /install/sapinst_instdir/x.
INFO 2011-08-27 20:36:39.498
Removed file /install/sapinst_instdir/x.
INFO 2011-08-27 20:36:39.510
Authorizations set for /install/sapinst_instdir.
INFO 2011-08-27 20:36:39.510
Working directory changed to /install/sapinst_exe.26397.1314448526.
INFO 2011-08-27 20:36:39.543
Working directory changed to /Media/IM_LINUX_ORACLE/IM_LINUX_X86_64.
INFO 2011-08-27 20:37:58.173
Creating file /install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL/x.
INFO 2011-08-27 20:37:58.174
Removed file /install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL/x.
INFO 2011-08-27 20:38:02.167
Creating file /install/sapinst_instdir/x.
INFO 2011-08-27 20:38:02.168
Removed file /install/sapinst_instdir/x.
INFO 2011-08-27 20:38:02.172
Authorizations set for /install/sapinst_instdir.
INFO 2011-08-27 20:38:02.190
Removed file /install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL/dev_sap_kernel.
INFO 2011-08-27 20:38:02.192
Removed file /install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL/dev_sap_kernel.
INFO 2011-08-27 20:38:02.198
Copied file '/Media/IM_LINUX_ORACLE/IM_LINUX_X86_64/dev_sap_kernel' to '/install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL/dev_sap_kernel'.
INFO 2011-08-27 20:38:02.217
Authorizations set for /install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL/dev_sap_kernel.
INFO 2011-08-27 20:38:02.217
Removed file /Media/IM_LINUX_ORACLE/IM_LINUX_X86_64/dev_sap_kernel.
INFO 2011-08-27 20:38:04.407
Copied file '/install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL/keydb.xml' to '/install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL/keydb.3.xml'.
INFO 2011-08-27 20:38:06.213
Copied file '/install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL/statistic.xml' to '/install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL/statistic.2.xml'.
INFO 2011-08-27 20:39:33.662
Working directory changed to /install/sapinst_exe.26397.1314448526.
INFO 2011-08-27 20:39:33.670
Working directory changed to /install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL.
INFO 2011-08-27 20:39:33.674
Working directory changed to /install/sapinst_exe.26397.1314448526.
INFO 2011-08-27 20:39:33.686
Working directory changed to /install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL.
INFO 2011-08-27 20:39:34.589
Working directory changed to /install/sapinst_exe.26397.1314448526.
INFO 2011-08-27 20:39:34.600
Working directory changed to /install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL.
INFO 2011-08-27 20:39:39.720
Working directory changed to /install/sapinst_exe.26397.1314448526.
INFO 2011-08-27 20:39:39.733
Working directory changed to /install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL.
INFO 2011-08-27 20:39:41.685
Copied file '/install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL/inifile.xml' to '/install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL/inifile.2.xml'.
INFO 2011-08-27 20:39:51.367
Execute step createDatabase of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|onehost|0|NW_CreateDBandLoad|ind|ind|ind|ind|createdbandload|0|NW_CreateDB|ind|ind|ind|ind|createdb|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|std|0|NW_OraDbBuild|ind|ind|ind|ind|5|0
INFO 2011-08-27 20:39:57.971
Working directory changed to /install/sapinst_exe.26397.1314448526.
INFO 2011-08-27 20:39:58.1
Working directory changed to /install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL.
INFO 2011-08-27 20:39:58.26
Working directory changed to /install/sapinst_exe.26397.1314448526.
INFO 2011-08-27 20:39:58.71
Working directory changed to /install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL.
INFO 2011-08-27 20:40:00.256
Working directory changed to /install/sapinst_exe.26397.1314448526.
INFO 2011-08-27 20:40:00.278
Working directory changed to /install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL.
ERROR 2011-08-27 20:40:08.434
CJS-00084 SQL statement or script failed. DIAGNOSIS: Error message: ORA-01501: CREATE DATABASE failed
ORA-00200: control file could not be created
ORA-00202: control file: '/oracle/JE1/origlogA/cntrl/cntrlJE1.dbf'
ORA-27041: unable to open file
Linux-x86_64 Error: 13: Permission denied
Additional information: 2
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
. SOLUTION: For more information, see ora_sql_results.log and the Oracle documentation.
ERROR 2011-08-27 20:40:08.437
MUT-03025 Caught ESAPinstException in module call: .
ERROR 2011-08-27 20:40:08.585
FCO-00011 The step createDatabase with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|onehost|0|NW_CreateDBandLoad|ind|ind|ind|ind|createdbandload|0|NW_CreateDB|ind|ind|ind|ind|createdb|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|std|0|NW_OraDbBuild|ind|ind|ind|ind|5|0|createDatabase was executed with status ERROR ( Last error reported by the step: SQL statement or script failed. DIAGNOSIS: Error message: ORA-01501: CREATE DATABASE failed
ORA-00200: control file could not be created
ORA-00202: control file: '/oracle/JE1/origlogA/cntrl/cntrlJE1.dbf'
ORA-27041: unable to open file
Linux-x86_64 Error: 13: Permission denied
Additional information: 2
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
. SOLUTION: For more information, see ora_sql_results.log and the Oracle documentation.).
INFO 2011-08-27 20:40:09.446
Creating file /install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL/__instana_tmp.xml.ora_sql results log:::
2011-08-27, 19:40:31 SAPINST ORACLE start logging for
CREATE DATABASE JE1 CONTROLFILE REUSE MAXLOGFILES 255 MAXLOGMEMBERS 3 MAXLOGHISTORY 1000 MAXDATAFILES 254 MAXINSTANCES 50 NOARCHIVELOG CHARACTER SET UTF8 NATIONAL CHARACTER SET UTF8 DATAFILE '/oracle/JE1/sapdata1/system_1/system.data1' SIZE 350M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M EXTENT MANAGEMENT LOCAL DEFAULT TEMPORARY TABLESPACE PSAPTEMP TEMPFILE '/oracle/JE1/sapdata1/temp_1/temp.data1' SIZE 1400M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M UNDO TABLESPACE PSAPUNDO DATAFILE '/oracle/JE1/sapdata1/undo_1/undo.data1' SIZE 700M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M SYSAUX DATAFILE '/oracle/JE1/sapdata1/sysaux_1/sysaux.data1' SIZE 200M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M
LOGFILE GROUP 1 ('/oracle/JE1/origlogA/log_g11m1.dbf',
'/oracle/JE1/mirrlogA/log_g11m2.dbf') SIZE 50M REUSE ,
GROUP 2 ('/oracle/JE1/origlogB/log_g12m1.dbf',
'/oracle/JE1/mirrlogB/log_g12m2.dbf') SIZE 50M REUSE ,
GROUP 3 ('/oracle/JE1/origlogA/log_g13m1.dbf',
'/oracle/JE1/mirrlogA/log_g13m2.dbf') SIZE 50M REUSE ,
GROUP 4 ('/oracle/JE1/origlogB/log_g14m1.dbf',
'/oracle/JE1/mirrlogB/log_g14m2.dbf') SIZE 50M REUSE
exit;
Output of SQL executing program:
SQL*Plus: Release 11.2.0.2.0 Production on Sat Aug 27 19:40:31 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
CREATE DATABASE JE1 CONTROLFILE REUSE MAXLOGFILES 255 MAXLOGMEMBERS 3 MAXLOGHISTORY 1000 MAXDATAFILES 254 MAXINSTANCES 50 NOARCHIVELOG CHARACTER SET UTF8 NATIONAL CHARACTER SET UTF8 DATAFILE '/oracle/JE1/sapdata1/system_1/system.data1' SIZE 350M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M EXTENT MANAGEMENT LOCAL DEFAULT TEMPORARY TABLESPACE PSAPTEMP TEMPFILE '/oracle/JE1/sapdata1/temp_1/temp.data1' SIZE 1400M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M UNDO TABLESPACE PSAPUNDO DATAFILE '/oracle/JE1/sapdata1/undo_1/undo.data1' SIZE 700M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M SYSAUX DATAFILE '/oracle/JE1/sapdata1/sysaux_1/sysaux.data1' SIZE 200M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M
ERROR at line 1:
ORA-01501: CREATE DATABASE failed
ORA-00200: control file could not be created
ORA-00202: control file: '/oracle/JE1/origlogA/cntrl/cntrlJE1.dbf'
ORA-27041: unable to open file
Linux-x86_64 Error: 13: Permission denied
Additional information: 2
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SAPINST: End of output of SQL executing program /oracle/JE1/112_64/bin/sqlplus.
SAPINST found errors.
SAPINST The current process environment may be found in sapinst_ora_environment.log.
2011-08-27, 19:40:31 SAPINST ORACLE stop logging
2011-08-27, 20:27:43 SAPINST ORACLE start logging for
SHUTDOWN IMMEDIATE;
exit;
Output of SQL executing program:
SQL*Plus: Release 11.2.0.2.0 Production on Sat Aug 27 20:27:43 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
ORA-01507: database not mounted
ORACLE instance shut down.
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SAPINST: End of output of SQL executing program /oracle/JE1/112_64/bin/sqlplus.
SAPINST found errors.
SAPINST The current process environment may be found in sapinst_ora_environment.log.
2011-08-27, 20:27:50 SAPINST ORACLE stop logging
================================================================================
2011-08-27, 20:27:50 SAPINST ORACLE start logging for
STARTUP NOMOUNT;
exit;
Output of SQL executing program:
SQL*Plus: Release 11.2.0.2.0 Production on Sat Aug 27 20:27:50 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to an idle instance.
ORA-32004: obsolete or deprecated parameter(s) specified for RDBMS instance
ORACLE instance started.
Total System Global Area 2338463744 bytes
Fixed Size 2228600 bytes
Variable Size 1174408840 bytes
Database Buffers 1140850688 bytes
Redo Buffers 20975616 bytes
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SAPINST: End of output of SQL executing program /oracle/JE1/112_64/bin/sqlplus.
2011-08-27, 20:27:52 SAPINST ORACLE stop logging
================================================================================
2011-08-27, 20:27:52 SAPINST ORACLE start logging for
CREATE DATABASE JE1 CONTROLFILE REUSE MAXLOGFILES 255 MAXLOGMEMBERS 3 MAXLOGHISTORY 1000 MAXDATAFILES 254 MAXINSTANCES 50 NOARCHIVELOG CHARACTER SET UTF8 NATIONAL CHARACTER SET UTF8 DATAFILE '/oracle/JE1/sapdata1/system_1/system.data1' SIZE 350M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M EXTENT MANAGEMENT LOCAL DEFAULT TEMPORARY TABLESPACE PSAPTEMP TEMPFILE '/oracle/JE1/sapdata1/temp_1/temp.data1' SIZE 1400M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M UNDO TABLESPACE PSAPUNDO DATAFILE '/oracle/JE1/sapdata1/undo_1/undo.data1' SIZE 700M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M SYSAUX DATAFILE '/oracle/JE1/sapdata1/sysaux_1/sysaux.data1' SIZE 200M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M
LOGFILE GROUP 1 ('/oracle/JE1/origlogA/log_g11m1.dbf',
'/oracle/JE1/mirrlogA/log_g11m2.dbf') SIZE 50M REUSE ,
GROUP 2 ('/oracle/JE1/origlogB/log_g12m1.dbf',
'/oracle/JE1/mirrlogB/log_g12m2.dbf') SIZE 50M REUSE ,
GROUP 3 ('/oracle/JE1/origlogA/log_g13m1.dbf',
'/oracle/JE1/mirrlogA/log_g13m2.dbf') SIZE 50M REUSE ,
GROUP 4 ('/oracle/JE1/origlogB/log_g14m1.dbf',
'/oracle/JE1/mirrlogB/log_g14m2.dbf') SIZE 50M REUSE
exit;
Output of SQL executing program:
SQL*Plus: Release 11.2.0.2.0 Production on Sat Aug 27 20:27:52 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
CREATE DATABASE JE1 CONTROLFILE REUSE MAXLOGFILES 255 MAXLOGMEMBERS 3 MAXLOGHISTORY 1000 MAXDATAFILES 254 MAXINSTANCES 50 NOARCHIVELOG CHARACTER SET UTF8 NATIONAL CHARACTER SET UTF8 DATAFILE '/oracle/JE1/sapdata1/system_1/system.data1' SIZE 350M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M EXTENT MANAGEMENT LOCAL DEFAULT TEMPORARY TABLESPACE PSAPTEMP TEMPFILE '/oracle/JE1/sapdata1/temp_1/temp.data1' SIZE 1400M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M UNDO TABLESPACE PSAPUNDO DATAFILE '/oracle/JE1/sapdata1/undo_1/undo.data1' SIZE 700M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M SYSAUX DATAFILE '/oracle/JE1/sapdata1/sysaux_1/sysaux.data1' SIZE 200M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M
ERROR at line 1:
ORA-01501: CREATE DATABASE failed
ORA-00200: control file could not be created
ORA-00202: control file: '/oracle/JE1/origlogA/cntrl/cntrlJE1.dbf'
ORA-27041: unable to open file
Linux-x86_64 Error: 13: Permission denied
Additional information: 2
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SAPINST: End of output of SQL executing program /oracle/JE1/112_64/bin/sqlplus.
SAPINST found errors.
SAPINST The current process environment may be found in sapinst_ora_environment.log.
2011-08-27, 20:27:52 SAPINST ORACLE stop logging
================================================================================
2011-08-27, 20:40:00 SAPINST ORACLE start logging for
SHUTDOWN IMMEDIATE;
exit;
Output of SQL executing program:
SQL*Plus: Release 11.2.0.2.0 Production on Sat Aug 27 20:40:00 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
ORA-01507: database not mounted
ORACLE instance shut down.
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SAPINST: End of output of SQL executing program /oracle/JE1/112_64/bin/sqlplus.
SAPINST found errors.
SAPINST The current process environment may be found in sapinst_ora_environment.log.
2011-08-27, 20:40:05 SAPINST ORACLE stop logging
================================================================================
2011-08-27, 20:40:05 SAPINST ORACLE start logging for
STARTUP NOMOUNT;
exit;
Output of SQL executing program:
SQL*Plus: Release 11.2.0.2.0 Production on Sat Aug 27 20:40:05 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to an idle instance.
ORA-32004: obsolete or deprecated parameter(s) specified for RDBMS instance
ORACLE instance started.
Total System Global Area 2338463744 bytes
Fixed Size 2228600 bytes
Variable Size 1174408840 bytes
Database Buffers 1140850688 bytes
Redo Buffers 20975616 bytes
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SAPINST: End of output of SQL executing program /oracle/JE1/112_64/bin/sqlplus.
2011-08-27, 20:40:07 SAPINST ORACLE stop logging
================================================================================
2011-08-27, 20:40:08 SAPINST ORACLE start logging for
CREATE DATABASE JE1 CONTROLFILE REUSE MAXLOGFILES 255 MAXLOGMEMBERS 3 MAXLOGHISTORY 1000 MAXDATAFILES 254 MAXINSTANCES 50 NOARCHIVELOG CHARACTER SET UTF8 NATIONAL CHARACTER SET UTF8 DATAFILE '/oracle/JE1/sapdata1/system_1/system.data1' SIZE 350M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M EXTENT MANAGEMENT LOCAL DEFAULT TEMPORARY TABLESPACE PSAPTEMP TEMPFILE '/oracle/JE1/sapdata1/temp_1/temp.data1' SIZE 1400M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M UNDO TABLESPACE PSAPUNDO DATAFILE '/oracle/JE1/sapdata1/undo_1/undo.data1' SIZE 700M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M SYSAUX DATAFILE '/oracle/JE1/sapdata1/sysaux_1/sysaux.data1' SIZE 200M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M
LOGFILE GROUP 1 ('/oracle/JE1/origlogA/log_g11m1.dbf',
'/oracle/JE1/mirrlogA/log_g11m2.dbf') SIZE 50M REUSE ,
GROUP 2 ('/oracle/JE1/origlogB/log_g12m1.dbf',
'/oracle/JE1/mirrlogB/log_g12m2.dbf') SIZE 50M REUSE ,
GROUP 3 ('/oracle/JE1/origlogA/log_g13m1.dbf',
'/oracle/JE1/mirrlogA/log_g13m2.dbf') SIZE 50M REUSE ,
GROUP 4 ('/oracle/JE1/origlogB/log_g14m1.dbf',
'/oracle/JE1/mirrlogB/log_g14m2.dbf') SIZE 50M REUSE
exit;
Output of SQL executing program:
SQL*Plus: Release 11.2.0.2.0 Production on Sat Aug 27 20:40:08 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
CREATE DATABASE JE1 CONTROLFILE REUSE MAXLOGFILES 255 MAXLOGMEMBERS 3 MAXLOGHISTORY 1000 MAXDATAFILES 254 MAXINSTANCES 50 NOARCHIVELOG CHARACTER SET UTF8 NATIONAL CHARACTER SET UTF8 DATAFILE '/oracle/JE1/sapdata1/system_1/system.data1' SIZE 350M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M EXTENT MANAGEMENT LOCAL DEFAULT TEMPORARY TABLESPACE PSAPTEMP TEMPFILE '/oracle/JE1/sapdata1/temp_1/temp.data1' SIZE 1400M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M UNDO TABLESPACE PSAPUNDO DATAFILE '/oracle/JE1/sapdata1/undo_1/undo.data1' SIZE 700M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M SYSAUX DATAFILE '/oracle/JE1/sapdata1/sysaux_1/sysaux.data1' SIZE 200M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M
ERROR at line 1:
ORA-01501: CREATE DATABASE failed
ORA-00200: control file could not be created
ORA-00202: control file: '/oracle/JE1/origlogA/cntrl/cntrlJE1.dbf'
ORA-27041: unable to open file
Linux-x86_64 Error: 13: Permission denied
Additional information: 2
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SAPINST: End of output of SQL executing program /oracle/JE1/112_64/bin/sqlplus.
SAPINST found errors.
SAPINST The current process environment may be found in sapinst_ora_environment.log.
2011-08-27, 20:40:08 SAPINST ORACLE stop logging -
Can't create database using ASM (SOLVED)
Hi all
I'm trying to use ASM for the first time, on Oracle 10.2.0.1 on Solaris x64.
I have installed the ASM instance into /opt/oracle/asm/10.2.0 and created disk groups. I have cssd running OK. I am able to start and stop the ASM instance without problems, and I can select from v$asm_diskgroup to confirm that disks are mounted OK.
I have then installed Oracle EE separately into /opt/oracle/server/10.2.0. I first did a software only install, and now I am trying to create a DB.
The problems come when I try to use this ASM instance to host a new database. I first tried to use DBCA to create a new database, but on database creation I got the following errors:
ORA-00200: control file could not be created
ORA-00202: control file: '+DBLIVE1'
ORA-17502: ksfdcre:4 Failed to create file +DBLIVE1
ORA-15001: diskgroup "DBLIVE1" does not exist or is not mounted
ORA-15055: Message 15055 not found; No message file for product=RDBMS, facility=ORA
ORA-01031: insufficient privileges
I then told DBCA just to create the DB creation scripts, and I tried manually running these with SQL*Plus.
When doing it with SQL*PLus, I initially got the same error as shown above. But then something changed (sorry, not sure what), and now the error I get is:
CREATE DATABASE "NEONREL1"
ERROR at line 1:
ORA-01501: CREATE DATABASE failed
ORA-00349: failure obtaining block size for '+DBLIVE1'
ORA-01031: insufficient privileges
I've put some debug info below, showing me succesfully connecting to the ASM instance and then attempting to create the DB using the db creation scripts, showing the error at the end. You can see that the oracle OS user is able to connect fine to ASM, then I swithc ORACLE_SID and ORACLE_HOME to the EE install and try to create the DB, at which point it apparently can't connect to ASM any more.
I've tried the DB creation many times, and in between attempts I completely empty $ORACLE_HOME/admin/<dbname> and delete the files related to the attempted install from $ORACLE_HOME/dbs/ . I've also stopping/starting ASM, rebooting, and I've done the install of ASM and EE a couple of times over in case I made any mistakes in my earlier attempts.
Any help would be much appreciated!
Tom
##### CHECKING ASM
oracle@neonrcom-db1:~$ uname -a
SunOS neonrcom-db1 5.10 Generic_127128-11 i86pc i386 i86pc
# css is running
oracle@neonrcom-db1:~$ ps -ef | grep css
oracle 498 1 0 21:46:40 ? 0:01 /opt/oracle/asm/10.2.0/bin/ocssd.bin
# listener is running in the ASM instance
oracle@neonrcom-db1:~$ ps -ef | grep tnsl
oracle 1332 1 0 21:49:59 ? 0:00 /opt/oracle/asm/10.2.0/bin/tnslsnr LISTENER -inherit
# ASM is only entry in /var/opt/oracle/oratab
oracle@neonrcom-db1:~$ grep -v "^#" /var/opt/oracle/oratab
+ASM:/opt/oracle/asm/10.2.0:N
# I can connect to ASM fine, and it has diskgroups mounted.
oracle@neonrcom-db1:~$ export ORACLE_HOME=/opt/oracle/asm/10.2.0
oracle@neonrcom-db1:~$ export ORACLE_SID='+ASM'
oracle@neonrcom-db1:~$ sqlplus "sys as sysdba"
SQL*Plus: Release 10.2.0.1.0 - Production on Mon Jul 21 20:53:10 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter password:
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> set line 150
SQL> select name, block_size, state, type, total_mb, free_mb from v$asm_diskgroup;
NAME BLOCK_SIZE STATE TYPE TOTAL_MB FREE_MB
DBARCH1 4096 MOUNTED EXTERN 2096856 2096784
DBLIVE1 4096 MOUNTED EXTERN 4193904 4193812
#### Contents of init.ora for new DB
db_create_file_dest=+DBLIVE1
db_recovery_file_dest=+DBARCH1
db_recovery_file_dest_size=2147483648
##### DB INSTALLATION ATTEMPT
oracle@neonrcom-db1:~$ export ORACLE_HOME=/opt/oracle/server/10.2.0
oracle@neonrcom-db1:~$ export ORACLE_SID='NEONREL1'
oracle@neonrcom-db1:~$ export PATH=$ORACLE_HOME/bin:$PATH
oracle@neonrcom-db1:~$ /opt/oracle/server/10.2.0/admin/NEONREL1/scripts/NEONREL1.sh
You should Add this entry in the /var/opt/oracle/oratab: NEONREL1:/opt/oracle/server/10.2.0:Y
SQL*Plus: Release 10.2.0.1.0 - Production on Mon Jul 21 22:10:54 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
specify a password for sys as parameter 1
Enter value for 1: xxx
specify a password for system as parameter 2
Enter value for 2: xxx
specify a password for sysman as parameter 3
Enter value for 3: xxx
specify a password for dbsnmp as parameter 4
Enter value for 4: xxx
specify ASM SYS user password as parameter 6
Enter value for 6: xxx
Connected to an idle instance.
SQL> spool /opt/oracle/server/10.2.0/admin/NEONREL1/scripts/CreateDB.log
SQL> startup nomount pfile="/opt/oracle/server/10.2.0/admin/NEONREL1/scripts/init.ora";
ORACLE instance started.
Total System Global Area 1.9294E+10 bytes
Fixed Size 2054976 bytes
Variable Size 2264925376 bytes
Database Buffers 1.7012E+10 bytes
Redo Buffers 14721024 bytes
SQL> CREATE DATABASE "NEONREL1"
2 MAXINSTANCES 8
3 MAXLOGHISTORY 1
4 MAXLOGFILES 16
5 MAXLOGMEMBERS 3
6 MAXDATAFILES 100
7 DATAFILE SIZE 300M AUTOEXTEND ON NEXT 10240K MAXSIZE UNLIMITED
8 EXTENT MANAGEMENT LOCAL
9 SYSAUX DATAFILE SIZE 120M AUTOEXTEND ON NEXT 10240K MAXSIZE UNLIMITED
10 SMALLFILE DEFAULT TEMPORARY TABLESPACE TEMP TEMPFILE SIZE 20M AUTOEXTEND ON NEXT 640K MAXSIZE UNLIMITED
11 SMALLFILE UNDO TABLESPACE "UNDOTBS1" DATAFILE SIZE 200M AUTOEXTEND ON NEXT 5120K MAXSIZE UNLIMITED
12 CHARACTER SET AL32UTF8
13 NATIONAL CHARACTER SET UTF8
14 LOGFILE GROUP 1 SIZE 51200K,
15 GROUP 2 SIZE 51200K,
16 GROUP 3 SIZE 51200K
17 USER SYS IDENTIFIED BY "&&sysPassword" USER SYSTEM IDENTIFIED BY "&&systemPassword";
CREATE DATABASE "NEONREL1"
ERROR at line 1:
ORA-01501: CREATE DATABASE failed
ORA-00349: failure obtaining block size for '+DBLIVE1'
ORA-01031: insufficient privileges
Message was edited by:
tjobbinsUpdate: I've worked out the difference between the two sets of errors I get.
The basic error is this:
ORA-00200: control file could not be created
ORA-00202: control file: '+DBLIVE1'
ORA-17502: ksfdcre:4 Failed to create file +DBLIVE1
ORA-15001: diskgroup "DBLIVE1" does not exist or is not mounted
ORA-15055: Message 15055 not found; No message file for product=RDBMS, facility=ORA
ORA-01031: insufficient privileges
However if my init.ora contains the line:
control_files=/opt/oracle/server/10.2.0/dbs/cntrlNEONREL1.dbf
then I instead get the second error:
CREATE DATABASE "NEONREL1"
ERROR at line 1:
ORA-01501: CREATE DATABASE failed
ORA-00349: failure obtaining block size for '+DBLIVE1'
ORA-01031: insufficient privileges
So basically these must be the same error, just in the second case I'm not trying to put the control file on the ASM so it fails at a different point.
But both errors must be because of the same cause, I suppose. -
How do I view who created an event in my I Calendar?
In June of 2013 I was given an Apple Mac Book as a Father's Day present from my wife. She set the computer up herself and synched our I Cloud calendars together. I had an Apple ID prior to this. As far as I know we don't share an I Cloud Account.
Due to unforseen circumstances in our marriage I had to purse a Restraining Order. Since that restrianing order, my Verizon Online Account was compromised on two occasions and the Verizon Back Up Assistant Application was Downloaded to an unknown Computer. Additionally my Optimum Online Email Account was compromised on two occasions and the password was changed.
On January 29th, 2014 I received a notification that my estragned wife's Apple ID created an event in my I Calendar. I am not sure how she was able to accomplish this because I purposely changed my Apple ID in December of 2013 to prevent this from happening. So I assumed our calendars were no longer synched anymore.
I then reported this to the local police department for her violating the restraining order and they arrested me for falsifying a police report. When they looked at my Macbook they were unable to tell who created the event. While there I synched my calendar to my Iphone and we were able to view the event in that calendar. However, it showed the event as being edited by me and not created by my wife's Apple ID. I dont recall editing this event. I looked at several times and may have moved it to another calendar but I dont specifically remember. This was their probable cause to arrest me and they assumed I purpsoely tried to have my wife arrested.
Is there any other way to retrieve who created the event on my Calendar from my computer or I Cloud Account?
Is there any way to retrieve the mesage I received in the notification center? Is this stored anywhere on my computer?
When I changed my Apple ID wouldnt she have to get my permission to synch our calendars together? Wouldnt one of us have to approve this via an email?
Can you send documentation on your company letterhead that I changed my Apple ID and the date it was changed?
My attorney is preparing a subpoena to submit to Apple. What is the proper wording he should use in regards to getting the proper information to see who created the event in my I calendar? Would it be for records pertaining to my I Cloud Account or Apple ID? Is this information even recorded in the I Cloud account such Internet Protocoal Addresses?
<E-mails Edited by Host>Open the event, or create a new event. Under 'invitees' enter the email addresses and 'send'.
-
I m Not able to access to create database, Please solve the problem. please give some text steps
===================================
Create failed for Database 'Qlao'. (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=10.50.1750.9+((dac_inplace_upgrade).101209-1051+)&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Create+Database&LinkId=20476
Program Location:
at Microsoft.SqlServer.Management.Smo.SqlSmoObject.CreateImpl()
at Microsoft.SqlServer.Management.Smo.Database.Create()
at Microsoft.SqlServer.Management.SqlManagerUI.CreateDatabaseData.DatabasePrototype.ApplyChanges(Control marshallingControl)
at Microsoft.SqlServer.Management.SqlManagerUI.CreateDatabase.DoPreProcessExecution(RunType runType, ExecutionMode& executionResult)
at Microsoft.SqlServer.Management.SqlMgmt.SqlMgmtTreeViewControl.DoPreProcessExecutionAndRunViews(RunType runType)
at Microsoft.SqlServer.Management.SqlMgmt.SqlMgmtTreeViewControl.ExecuteForSql(PreProcessExecutionInfo executionInfo, ExecutionMode& executionResult)
at Microsoft.SqlServer.Management.SqlMgmt.SqlMgmtTreeViewControl.Microsoft.SqlServer.Management.SqlMgmt.IExecutionAwareSqlControlCollection.PreProcessExecution(PreProcessExecutionInfo executionInfo, ExecutionMode& executionResult)
at Microsoft.SqlServer.Management.SqlMgmt.ViewSwitcherControlsManager.RunNow(RunType runType, Object sender)
===================================
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
Program Location:
at Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteNonQuery(String sqlCommand, ExecutionTypes executionType)
at Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteNonQuery(StringCollection sqlCommands, ExecutionTypes executionType)
at Microsoft.SqlServer.Management.Smo.ExecutionManager.ExecuteNonQuery(StringCollection queries)
at Microsoft.SqlServer.Management.Smo.SqlSmoObject.ExecuteNonQuery(StringCollection queries, Boolean includeDbContext)
at Microsoft.SqlServer.Management.Smo.SqlSmoObject.CreateImplFinish(StringCollection createQuery, ScriptingOptions so)
at Microsoft.SqlServer.Management.Smo.SqlSmoObject.CreateImpl()
===================================
CREATE DATABASE permission denied in database 'master'. (.Net SqlClient Data Provider)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=10.50.1617&EvtSrc=MSSQLServer&EvtID=262&LinkId=20476
Server Name: SLPSOFTSOLS1
Error Number: 262
Severity: 14
State: 1
Line Number: 1
Program Location:
at Microsoft.SqlServer.Management.Common.ConnectionManager.ExecuteTSql(ExecuteTSqlAction action, Object execObject, DataSet fillDataSet, Boolean catchException)
at Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteNonQuery(String sqlCommand, ExecutionTypes executionType)Hello,
This issue might be caused by the User Account Control (UAC) settings if we use Windows 7 or Windows Server2008, ect Operating System. Please also take a look at the following articles:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/28fee0ed-c7e2-40df-8f79-f513c9848f09/create-database-permission-denied-in-database-master-microsoft-sql-server-error-262?forum=sqltools
http://blogs.msdn.com/b/dparys/archive/2009/09/17/create-database-permission-denied-in-database-master-my-fix.aspx
Regards,
Elvis Long
TechNet Community Support
Maybe you are looking for
-
Mini port display to vga adapter won't work
Hi, since I upgraded to Maverick I haven't been able to connect to my projector via the miniport display to vga adapter. It all worked before that. I need to connect to the Interactive White Board for my work and it really annoys me. I'm forced to u
-
Contacts and calendar on the phone are gone. How can I get them back?
I have sync my iphone with google contacts and now the pre-existing data, contacts and calendar entrys are missing on the phone. The contacts from google contacts are there but none of existing contacts and dates. Can I get them back? or are they g
-
How to handle SYS_REFCURSOR in Pro*C
Hi, I am calling a Store procedure in Pro*c ,but that store procedure has an OUT parameter as SYS_REFCURSOR. How to handle this issue in pro*c. store procedure sample: proc_SS(PV_I_ACC IN NUMBER,PV_CUR_O OUT SYS_REFCURSOR)
-
Multi-task data logging with DAQmx
I was wonder is it possible to use 'DAQmx Configure Logging' VI and 'DAQmx Start New File' VI for multiple tasks? I'm doing synchronized high speed DAQ with NI PXI-6133 cards. Each card (there are 16) must have its own task. Although the DAQ is co
-
"Erase Free Space" work-around for non-apple ssd
for those of you attempting to "Erase Free Space" per knowledge base article: "OS X Lion v10.7.3: User account passwords appear in log files for Legacy FileVault, and/or network home directories" quote: "6. Open Disk Utility. 7. Select your OS X Lion