Why am I getting dizzy when I plug in my iPhone 5s

Why am I getting dizzy when I plug in my phone iPhone 5s?

Honestly that was my first thought too but I just switched 3 weeks ago from the iPhone 4S and everything was fine so how does that explain things. Maybe the power output on the 5s is stronger or something?
Because I can use the phone call day long off the charger and it's fine. I also tried my wife's 5s and it does the exact same thing to me and makes me dizzy and foggy headed when I plug it in.

Similar Messages

  • Why wont my phone charge when i plug the usb into my laptop?, Why wont my phone charge when i plug the usb into my laptop?

    why wont my phone charge when i plug my usb into my macbook air?

    Most USB ports can't supply the power required to charge a phone.
    The original USB port was limited to 0.5 amps at 5 volts which is 2.5 watts.
    Your phone probably has a 10 watt charger.
    Recent machines allow more power from the USB port but I doubt they allow 2 amps which is what would be required to get 10 watts.  Even if they did a 2 amp draw is going to be a heavy load on the MBA battery.

  • After downloading and installing the 64-bit version of iTunes for Windows I get a "Congratulations, you've successfully installed iTunes" message. However, when I plug in my iPhone to synch it I get a message that says that I don't the 64-bit version??

    After downloading the 64-bit version of iTunes on my Windows 7 machine I get the "Congratulations, you've successfully installed iTunes" message.  However, when I plug in my iPhone I get an error message that says, in part, "...the required software is not installed.  Run the installer to remove iTunes, then install the 64-bit version of iTunes".  I've been at this for hours, carefully deleting all Apple software (Apple Mobile Support, Quicktime, etc. and before each attempt to install the 64-bit version from Apple ( no third parties).  Same result each time!!!  Any ideas????

    Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
    (If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
    Does it install (or uninstall and then reinstall) properly for you? If so, does your device connect without that message now?

  • Why metadata index shows up when i plug my ipod into the computer in itunes and how to avoid metadata index showing up it will not allow me to eject from itunes

    why metadata index shows up when i plug my ipod into the computer  in itunes and it will not allow me to eject my ipod from itunes

    Hi donfrommars,
    Welcome to the Apple Support Communities!
    Please use the following article for information and instruction on deleting the U2 album from your devices and account.
    Remove iTunes gift album "Songs of Innocence" from your iTunes music library and purchases
    Have a great day,
    Joe

  • When I plug in my iPhone to a USB port on the back of my computer I get the error "MTP USB Device driver was not successfully installed"   and of course there is no device that shows up either.  It would be great to download my photos!  I'm using Windows

    When I plug in my iPhone to a USB port on the back of my computer I get the error "MTP USB Device driver was not successfully installed"   and of course there is no device that shows up either.  It would be great to download my photos!  I'm using Windows

    Go through this support doc:
    OS: Device not recognised in iTunes
    Windows: http://support.apple.com/kb/TS1538

  • Why does CS6 automatically start when i plug in my Canon Eos camera and how do I stop it

    Why does CS6 automatically start when i plug in my Canon Eos camera and how do I stop it from doing so?

    Autostart is controlled by your operating system. check the relevant system control panel or right-click the drive letter of your memory card to change these options in teh properties.
    Mylenium

  • I can't get my iphone5 to upload pictures to my MAC.  I have a lot of pictures and none show when I plug in the iphone to my computer

    I can't get my iphone5 to upload pictures to my MAC.  I have a lot of pictures and none show when I plug in the iphone to my computer

    You can't get iphone to sync pics to a mac?  What have you tried?  What didn't work?
    In itunes, did you go to the photo tab for your device and turned on iphoto to perform a sync. 

  • HT4623 When I plug my new iphone 5 into my computer and click on itunes, I get a message that Itunes 10.7 is required on my phone. How do I update my iphone5 with itunes 10.7?

    When I plug my new iphone 5 into my computer and click on itunes, I get a message that Itunes 10.7 is required on my phone. How do I update my iphone5 with itunes 10.7?

    Thanks.  My computer is updated.  When I plug my iphone in, it does not pick up my iphone to sync and gives me the message indicated above.
    I cannot sync my new iphone with my computer.

  • My 3rd Gen won't boot up and gets hot when I plug in the charger.

    The subject line pretty much describes my dilemma. My 3rd Gen won't boot up and gets hot when I plug in the charger. Any suggestions?

    It is normal for an iPod to become warn when charging. Have you tried the troubleshooting here:
    iPod touch: Hardware troubleshooting

  • HT1296 I am trying to sync contacts from my iPhone to Mac.  When I plug in my iPhone, I do not get the Info tab in iTunes (as mentioned in how to sync on this website).  How can I get the info tab to appear?

    I am trying to sync contacts from my iPhone to Mac.  When I plug in my iPhone, I do not get the Info tab in iTunes (as mentioned in how to sync on this website).  How can I get the info tab to appear?

    Since the release of Mavericks (OS X 10.9) syncing contacts and calendars with a Mac via iTunes is no longer supported. The currently supported method is via iCloud. Setup instructions: http://www.apple.com/icloud/setup/

  • When i plug in my iphone 4s to my Xtreme Mac luna sst it says accessory not supported by iphone.  Why is it doing this??

    when i plug in my iphone 4s to my Xtreme Mac luna sst it says accessory not supported by iphone.  Why is it doing this??

    Hello AliHoward,
    You may need to completely remove iTunes, QuickTime, and other Apple software from your system prior to reinstalling. The following articles (one for Windows XP, the other for Windows Vista/7) detail the removal process. I'll also link you to the latest version of iTunes for Windows (64bit specific installer).
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    http://support.apple.com/kb/HT1925
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/HT1923
    iTunes 11.0.4 for Windows 64
    http://support.apple.com/kb/DL1615
    Cheers,
    Allen

  • TS1503 do all my photos get backup when i plug into itunes

    do all my photos get backup when i plug into itunes

    Yes, but you should not rely on that, and they are not viewable.  They are only for restoring your iphone.
    You should be importing all pics taken with the iphone to your computer regularly as you would with any digital camera.

  • How can I get ITunes to open when I plug in my Iphone and show my Iphone

    ITunes does not open when I plug in my IPhone and my IPhone does not show up

    Open iTunes. Click edit. Open preferences. Click devices. Uncheck "prevent ipods, iphones, & ipads from automatically syncing". Close. Close iTunes. Plug in your phone

  • When I plug in my iphone 4S to my 64-bit computer a error box comes up in my 64-bit itunes that reads (This iphone cannot be used because the required software is not installed. Run the Itunes installer to remove itunes, than install the 64-bit version of

    When I plug in my iphone 4S to my 64-bit computer a error box comes up in my 64-bit itunes that reads (This iphone cannot be used because the required software is not installed. Run the Itunes installer to remove itunes, than install the 64-bit version of itines.) This just started a few weeks ago. I've done a system restore on my computer, deleated and reinstalled the 64-bit itunes several times, did a registery clean, rebooted. Nothing seems to work it will not pick up my phone.

    Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
    (If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
    Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
    If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

  • How can I disable the Photos app from automatically running when I plug in my iPhone?

    How can I disable the Photos app from automatically running when I plug in my iPhone?
    I have no intention of ever using Photos, in fact, having to abandon Aperture takes me one step close to moving back to Windows, but I digress.
    I just want to NOT have to kill the Photos app every time I plug in my phone.
    Thanks.

    I am still seeing the option Image Capture, like shown in the screenshot that Rysz posted.   But it is another example of the hide-and-seek Apple likes to play with us.
    The option has to be set for each device individually. With the device connected to USB, you have to click the tiny disclosure triangle in the lower left corner of the sidebar to reveal the option.
    I was perfectly happy with the program I paid for (Aperture), and now to maintain the functionality I have to pay for another application (LightRoom) to get the functionality that I paid for in Aperture.
    Aperture 3.6 is working well with Yosemite. I will use it, as long as I have a Mac, that will run Yosemite or a compatible system.
    Have you looked at Capture One?  It looks much more similar to Aperture than Lightroom.

Maybe you are looking for

  • Reopening old documents

    How do I reopen old Word files?  I have many, many documents that I created in the last century with earlier versions of Word for Mac.  Here is the version information of one such file chosen more or less at random:  "Microsoft Word 1.x-5.x document.

  • Printing button in PDF fillable form.

    Dear All, I have created a PDF fillable form with a button which save & print the pdf. The code for is as fallow: Formular1.#pageSet[0].Seite1.Bildfeld1::click - (JavaScript, client) var Mailto = "[email protected]"; var Betreff = Textfeld1.rawValue;

  • V_T7XSSSERRES view does not exist

    Hi gurus, I had a problem on the page links in the Job&Career section on our portal system after the ess configuration. I wrote it to OSS and in the reply he sent me the solution. In the solution he tells me update a field in the view called  V_T7XSS

  • What can we do about spam visiting our site?

    When i look at the statistics on Businesscatalyst, i noticed we had a lot of views. I found out most of them where from spam sites. What can we do, so spam can't visit our site anymore?

  • Phantom Folders

    When I go to save as in photoshop I get a folder in the save two window labeled like this dfEMoD%25WSOS7rBeFMIPGXg  I do not of course save to it but in the finder there are dozens of similarly labeled folders. Could anyone help me sove this problem?