Why am I getting this error message: Unable to write the email to the mailbox. Make sure the file system allows you write privileges, and you have enough disk s

I am getting this error message, just starting today: Unable to write the email to the mailbox. Make sure the file system allows you write privileges, and you have enough disk space to copy the mailbox. I have tried several solutions (cleaning out my inbox, compacting folders, rebooting, checking through the webmail side), all to no avail, Can anyone help?

which os do you have?

Similar Messages

  • Why do I get this error message when I open Organizer in Photoshop Elements 11 "Elements Organizer has stopped working"? My only option is to Close Program so I am effectively locked out of my photo catalogue.  I have reinstalled the program to no avail.

    Why do I get this error message when I open Organizer in Photoshop Elements 11 "Elements Organizer has stopped working"? My only option is to Close Program so I am effectively locked out of my photo catalogue. I have tried reinstalling the program but it made no difference to the error message.
    Could someone help please?  Steph

    Hi,
    Please give a try to Photoshop Elements (PSE) knowledge base. steps mentioned on this and see if it works.
    Regards
    Kishan

  • According to my network provider (Amaysim/Optus) Tethering is enabled, so why do I get this error message "to enable personal hotspot on this account, contact OPTUS"

    According to my network provider (Amaysim/Optus) Tethering is enabled, so why do I get this error message "to enable personal hotspot on this account, contact OPTUS"
    Amysim/Optus support can not help.
    I can not check or change any network settings (no APN settings)
    I have synced phone using latest itunes (10.5.3).
    Phone software is up to date (5.0.1).
    Network settings have been reset.
    SIM card has been taken out and put back in.
    Phone has been switched off/on again.
    Another sim card from virgin works ok (hotspot option is visible and can be turned on/off as required)
    The Amaysim/Optus SIM card can be put into another phone (android) and tethering/hotspot works fine.
    Can anyone provide solution to this nightmare?

    I am having the same issue although i have an iphone 5. I have contacted Live connected numerous times an tried everything imaginable to solve the issue. Is it possibly a handset issue? I cant recieve any help from optus as im with live connected, they cant help me and apple keep telling me to contact your carrier ( live connected). Seems to make me want to switch providers pretty shortly..
    please let me know if you can solve your issue and maybe it can help me too..

  • Why am I getting this error message......."Adobe Reader could not open 'SBA 413.pdf' because it is e

    why am I getting this error message when I try to open a PDF file?  Adobe Reader could not open 'SBA 413.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).

    It's difficult for anyone to say how to fix it. Try getting a new copy of it. Did you download it from a web site, as an email attachment, or something else?
    I donwloaded that form from the SBA web site and it worked fine for me. It is an XFA form created in LiveCycle Designer, but those should work fine with the desktop versions of Adobe Reader. So try downloading it: http://www.sba.gov/sites/default/files/SBA%20413_0.pdf

  • Why am I getting this error message when I try to import? "The following files were not imported because they could not be read. (645)" I can see them :(

    Why am I getting this error message when I try to import? "The following files were not imported because they could not be read. (645)" I can see them
    Is was working this morning!

    Depends on your operating system
    Go to google, try typing in
    Change permissions Windows
    or
    Change permissions Mac

  • When I want to scroll through My picks why do I get this Error message (A necessary data reference could not be resolved."

    When I want to scroll through My pictures  why do I get this Error message (A necessary data reference could not be resolved)

    Before anyone can help, they need information to work with. Basic stuff:
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. What were you doing when the problem arose?
    - Did it ever work properly?
    - Are there error messages?
    - What steps have you tried already to solve the issue.
    Anything else you can think of that might allow someone else to understand your issue.
    With this kind of information somebody can develop a starting point for troubleshooting the issue.
    Posts that consist of "iPhoto doesn't work. Help" or "iPhoto won't print" or "Suddenly I have no photos!!!!!!!!!!" mean that any helper is simply guessing. With information, s/he may be able to get your issue resolved sooner.

  • GetLastError: 1392 - why do I get this error message when I try to uninstall Acrobat XI Pro?

    GetLastError: 1392 - why do I get this error message when I try to uninstall Acrobat XI Pro?

    Hi uckldag,
    Please try uninstalling using Acrobat Cleaner tool ( Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs ) and check.
    Regards,
    Rave

  • I get this error message when I try to email photos using iPhoto: Your email did not go through because the server did not reply.

    I get this error message when I try to email photos using iPhoto: Your email did not go through because the server did not reply. How can I get this to work when my internet is connected?

    Are you able to email from Mail with those two accounts?  If so:
    1 - go to iPhoto's Accounts preference pane and delete both accounts. Now add them back and try again.
    2 - a better solution IMO is to set Mail as the email client for iPhoto is iPhoto's General preference pane.  This gives you better access to your contacts, a sent copy of all emails and, if you want a layout similar to iPhoto's, photo layouts located in Mail's stationary.

  • I keep getting this error message: Unable to add an item to the current keychain. An invalid value was detected

    I'm trying to add a WHM log-in to my Keychain. I keep getting this error message. It's a nasty password and I go there frequently, so having Keychain auto-fill would be really nice.

    Firefox 2.0.0.20 is the last ever version of Firefox for Win98 / SE / ME.
    You can get it from here, but you are better off using K-Meleon (derived from Firefox) or Opera instead an old version of Firefox:
    [ftp://ftp.mozilla.org/pub/firefox/releases/2.0.0.20/win32/en-US/]
    You can try KernelEx to get Firefox 3+ to work, but it would be very slow with an old PC of less than 750Mhz. 3.5 and later supposedly doesn't work.
    http://sourceforge.net/projects/kernelex/

  • Why do I get this error message: Application has requested the runtime to terminate?

    I get this error message: Application has requested the runtime to terminate in an unusual way.  The application won't open at all even after several tries and a reboot.

      Try making a direct desktop icon for the Editor and see if you can launch the program directly from the desktop.
    Right click anywhere on the desktop and select New >> Shortcut
    Browse to Computer OS C:
    And find the PSE Editor application in Program Files or Program Files (x86) on Windows 7 - 64 bit.
    C: >> Program Files >> Adobe >> Photoshop Elements 9
    Within the Photoshop elements 9 folder find PhotoshopElementsEditor.exe (with the blue icon)
    Select that file and click Next.
    Then click Finish.
      You should now be able to launch by double clicking on the new desktop icon, bypassing the welcome screen.

  • Why do I get  this error message "This volume does not support permanent version storage."

    I get this error message when I save a "pages 09" document edited on my macbook pro but saved to my mac mini (over a wifi network). All my Macs are running 10.9.3. My Mac mini is using time machine to back up to a separate hard drive (USB 3 connection). I Tried using Page 5.2 but it is a disaster over my network, slow, crashes, creates random folders....

    According to Apple network volumes do not support built in 'versions'…
    OS X Server: "The document 'file name' is on a volume that does not support permanent version storage" alert
    If in doubt Google the error text with any personal info removed.
    Work on it locally & copy it to the network daily if you need versions, otherwise use a real 'version control system' that you have some actual control over like GIT. It is designed for code projects, but you can cram anything in if you really want.
    http://www.git-scm.com
    I suspect Apples file format will make it miserable with Pages, but there are some great Mac GIT apps.
    Using Time Machine would be probably be suffice (run it on the Mac you use as the server & then restore versions on that Mac).

  • Why am I getting this error message, "Disk is too slow. (Prepare) (-10001)"

    Hello all!  I've been using GarageBand for a while now and I've accumulated quite a few files.  Along with all of my movies and iTunes library, my internal hard drive filled up rapidly and I didn't catch it.  I received a warning message on my screen one day saying that my hard drive was nearly full and I only had a few MB available.  I'm using a 150 GB Solid State Hard Disk on my 2009 MacBook Pro (2.6 GHz Intel Cre 2 Duo, 4 GB of RAM).  I remembered reading a while back that it's better to use an external hard drive for pretty much everything when using Garageband, so I bought one.  I now have a seagate 500 GB, 5400 rpm external (USB 2.0) and I moved ALL of my movies and music over to it.  I freed up around 60 GB of space on my internal hard drive in doing so. 
    So now that I've given you a little background, let me explain the issue I'm having.  Before I noticed that my hard drive was full, I started receiving this error message:
    Disk is too slow. (Prepare)
    (-10001)
    Upon receiving this message, I was unable to do pretty much anything in GarageBand.  I couldn't listen to tracks, export to iTunes, or do anything!  All I'm using GarageBand for is editing.  My band and I do all our recording (and mixing) offsite at a separate studio and i just deliver a 2 track stereo signal (L/R) to my MacBook.  From there, I just cut the individual tracks from a block of 30-45 minutes of recording because we just record our entire studio session and mix everything there.  I pretty much never have more than two tracks and a few effects going at the same time.
    After I realized that my disk was nearly full, I consulted my brother-in-law.  He's head of the IT Deartpment at a major hospital here in West L.A. and he told me that I may have created a problem with the cache by filling up my internal hard drive and that I may still have issues with performance even after I free up space.  He then told me that I may need to reboot my MacBook a few time to "free up the cache" (or something close to that, sorry guys I'm not that tech-savvy).  It seems he may have been right, as I'm still experiencing the same issue.  I rebooted around 10 times overall to no avail.  I'm still using my internal hard drive to store the files that I'm working on (temporarily) because USB 2.0 is way too slow for my liking, when using GarageBand.
    I've read quite a few articles on this offering solutions such as:
    1.  Do a complete Uninstall and Reinstall of GarageBand
    2.  Clone my hard drive to my external, format it, and reinstall everything back on it
    3.  Get a hard drive that supports Firewire 800 (The HDD I bought is USB 2.0, but it has two USB cables to increase speed, but I only have 1 port and I tried      a powered USB Hub, but this HDD won't work with it for some reason).
    4.  Use different editing software.
    5.  Take it to Apple!
    Will any of these things fix my problem?  Are some better than others?  Before I do anything, I wanted to ask this question on the furum to see if anybody had an easier (or cheaper!) solution.  Any suggestions, tips, or advice would be much appreciated, as my band is starting to get on my case about finishing our CD!  Thanks...  

    Have a look into the Preferences folder (YourUserFolder/Libraries/Preferences/) and trash all Logic preferences.
    You'll have to setup the program again.
    cheers
    rob

  • Why am I getting this error message when I try to open a photo in Preview?

    I am getting the following message when I try to open a photo in Preview. I have searched for possible solutions and nothing works for me. I have always used Preview to edit photos.

    Repairing the permissions of a home folder in Lion is a complicated procedure. I don’t know of a simpler one that always works.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
    Drag or copy — do not type — the following line into the Terminal window, then press return:
    chmod -R -N ~
    The command will take a noticeable amount of time to run. When a new line ending in a dollar sign ($) appears below what you entered, it’s done. You may see a few error messages about an “invalid argument” while the command is running. You can ignore those. If you get an error message with the words “Permission denied,” enter this:
    sudo !!
    You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up.
    Next, boot from your recovery partition by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
    When the recovery desktop appears, select Utilities ▹ Terminal from the menu bar.
    In the Terminal window, enter “resetpassword” (without the quotes) and press return. A Reset Password window opens. You’re not going to reset the password.
    Select your boot volume if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select  ▹ Restart from the menu bar.

  • I keep getting an error message that my computer needs to be shut down.  It is like a dark screen comes down and I have to hold the on button until it shuts down.  Why is this happening?

    I keep getting an error message that my cmputer needs to be shut down.  A dark screen comes down and it says to restart.  I have to hold the ON button until the computer shuts down.  Then I can restart and it says it is sending a report to Apple.  This seens to be happening a lot lately.  Has anyone else had this problem?

    Hi Carol...
    error message that my computer needs to be shut down. It is like a dark screen comes down
    That is referred to as a kernel panic.
    Help here >  Tutorial: Avoiding and eliminating Kernel panics | MacFixIt - CNETReviews

  • Why am i getting this error message? I don't get it

    i wrote a program to read lines of date in a text file, grab certain data from the different lines of data (records) and write that data out to a new line in a new file. I have successfully compiled the program, but when I am trying to test it, i get this error an I have no clue what the problem is.
    Exception in thread "main" java.lang.StringIndexOutOfBoundsException: String index out of range: 3
    at java.lang.String.substring(Unknown Source)
    at myprojectname.main(myprojectname.java:100)
    Now line 100 is a field that I am trying to read in the file
    thisField = strdata.substring(46, 3);
    Please HELP

    oh wow you are really picking at me. ;-) See I had someone helping me with this, that says he has many years of experience, and i do appreciate his help but i think i am finding that he may be stuck in his ways with the older versions of java or whatever, i am finding this out with a lot of things that we covered, but had the wrong explanation for it, this is one of them, that's why i was trying to skip that line, but in actuality it is not even reading the header fline in the file and I didn't even have to skip it. i stumbled on that just a bit ago, right after reading your responses to mine and a few other questions. I will get better and this, then I can do what you do! ;-)

Maybe you are looking for

  • Error when trying to sign in on mobile phone

    Dear Admin, I want to browse the ORACLE ADF FORUMS in my mobile phone (nokia x2-01 with UC and Opera mini Browser), the forum page opens correctly but when i try to signin it gives me error. ORACLE ACCESS MANAGER ERROR: System error. Please re-try yo

  • Change the output length of a field?

    I have a table that will write a field ] with 18 characters since that's the length in the table, but instead the content of the field should be copied into a variable which length is 30 characters and then be written in to the text file (as a result

  • HT2470 Why does this not explain how to change the sort order?

    Why does this (i.e. support at Apple.com) not explain how to change the sort order? I can "arrange" by Date Modified for example but it won't let me switch to use most recent dates first. Also, what is Apple-speak for arrange versus sort anyway? It s

  • Compliation issue with Java 1.5

    Following Compilation warning is seen only with Java 1.5 for the code using JNI - /sw/CRFS/solaris2.8-sunpro5.3/THIRDPARTY_SUNSTUDIO9/0_0_3/bin/SUNWspro/prod/bin/stdlibfilt -stderr </tmp/c++filt.27205.1.err ld: warning: file /share/prime/JDK/jdk1.5.0

  • ERP application and multiple tablespaces

    Hi All, I am trying to build a ERP style application in my company...modules are Accounting, Purchase, Sales, Export, Payroll & HR. So far I have finished Accounting..What I did is. 1. Created one table space called ERPShared and created tables in it