Why am I getting this error when trying to do Image Processor?

Ok I am using Bridge & Image Processor to add a water mark to multiple photos at a time with my ready made action.  But for some reason I seem to be getting this error message every few pictures?
I've never had problems with other photo sets doing this before, but it was just recently that it started.
But it will successfully add the water mark to some of them via the Image Processor

Actually, my DVD multi-drives are I:\ and J:\, as my C:\ thru H:\ drives are my individual internal HDD's. Even on my laptop, my multi-drive is F:\. I always list my internals in order, and my multi-drives afterwards. In my case, it's simple layout for simple minds. I am also keen on having my internals listed at the hardware level as 0 = C:\, 1 = D:\, 2 = E:\, 3 = F:\ and so on. Once let a builder deviate from this order and it bit me big time - never again!
Now, you are possibly correct that the D:\ might be the OP's D:\ is the multi-drive, and now some source disc is not in it. To keep this sort of thing from happening, I ALWAYS Copy my Assets to an internal from my externals (usually), my NAS, and from any archive discs. Importing/Opening from a DVD/CD is often asking for trouble.
Good luck to the OP,
Hunt

Similar Messages

  • Why do I get this error when trying to use my bluetooth headset as a listening device? There was an error connecting to your audio device. Make sure it is turned on and in range. The audio portion of the program you were using may have to be restarted.

    Why do I get this error when trying to use my bluetooth headset as a listening device? There was an error connecting to your audio device. Make sure it is turned on and in range. The audio portion of the program you were using may have to be restarted.

    I may have already resolved this issue buy removing the device from my computer and re-pairing it. It is currently working just fine.

  • Can anyone tell me why I'm getting this error when trying to make visibility variables

    I have set these up in previous versions of Illustrator. CS and illustrator 10 worked just fine with Variables. Now I can't seem to switch between data sets. I just keep getting this error when I try to switch from one data set to another.

    I'll start with the permissions and see if it changes the behavior.

  • Why would i get this error when trying to create a browser to a queue

    Is there a way to find out what Jar file weblogic is trying to
              open....
              i have this occuring on weblogic 7 sp1 when i try to create a browser
              to a queue
              java.lang.ExceptionInInitializerError:
              java.lang.IllegalStateException: zip file closed
              at java.util.zip.ZipFile.ensureOpen(ZipFile.java:377)
              at java.util.zip.ZipFile.getEntry(ZipFile.java:138)
              at java.util.jar.JarFile.getEntry(JarFile.java:176)
              at sun.net.www.protocol.jar.URLJarFile.getEntry(URLJarFile.java:67)
              at sun.net.www.protocol.jar.JarURLConnection.connect(JarURLConnection.java:91)
              at sun.net.www.protocol.jar.JarURLConnection.getInputStream(JarURLConnection.java:103)
              at java.net.URL.openStream(URL.java:793)
              at weblogic.common.internal.VersionInfo.getLocalWLPackages(VersionInfo.java:176)
              at weblogic.common.internal.VersionInfo.<init>(VersionInfo.java:34)
              at weblogic.common.internal.PeerInfo.<init>(PeerInfo.java:58)
              at weblogic.common.internal.PeerInfo.<init>(PeerInfo.java:49)
              at weblogic.common.internal.PeerInfo.<init>(PeerInfo.java:43)
              at weblogic.jms.frontend.FEBrowserCreateRequest.<clinit>(FEBrowserCreateRequest.java:98)
              at weblogic.jms.client.JMSSession.createBackEndBrowser(JMSSession.java:1750)
              at weblogic.jms.client.JMSQueueBrowser.<init>(JMSQueueBrowser.java:46)
              at weblogic.jms.client.JMSSession.createBrowser(JMSSession.java:1344)
              at com.gallup.scheduler.services.MessageStatusHandler.checkAndEmailStatus(MessageStatusHandler.java:192)
              at com.gallup.scheduler.services.MessageStatusHandler.handleAlarm(MessageStatusHandler.java:80)
              at com.jalios.jdring.AlarmManager.notifyListeners(AlarmManager.java:357)
              at com.jalios.jdring.AlarmWaiter.run(AlarmWaiter.java:110)
              at java.lang.Thread.run(Thread.java:479)
              

    First time I've seen this one.
              The core issue may be that WL can not find its jar's
              manifest file META-INF/MANIFEST.MF, or can find it
              but can't open it.
              Are you doing something unique?
              A bunch of random questions for you:
              Is the full weblogic.jar in your classpath?
              Is it corrupted somehow?
              Is this problem unique to 7.0sp1?
              Is this application running on the server? In an applet?
              Tom Barnes
              Vishal Santoshi wrote:
              > Is there a way to find out what Jar file weblogic is trying to
              > open....
              > i have this occuring on weblogic 7 sp1 when i try to create a browser
              > to a queue
              >
              >
              >
              > java.lang.ExceptionInInitializerError:
              > java.lang.IllegalStateException: zip file closed
              > at java.util.zip.ZipFile.ensureOpen(ZipFile.java:377)
              > at java.util.zip.ZipFile.getEntry(ZipFile.java:138)
              > at java.util.jar.JarFile.getEntry(JarFile.java:176)
              > at sun.net.www.protocol.jar.URLJarFile.getEntry(URLJarFile.java:67)
              > at sun.net.www.protocol.jar.JarURLConnection.connect(JarURLConnection.java:91)
              > at sun.net.www.protocol.jar.JarURLConnection.getInputStream(JarURLConnection.java:103)
              > at java.net.URL.openStream(URL.java:793)
              > at weblogic.common.internal.VersionInfo.getLocalWLPackages(VersionInfo.java:176)
              > at weblogic.common.internal.VersionInfo.<init>(VersionInfo.java:34)
              > at weblogic.common.internal.PeerInfo.<init>(PeerInfo.java:58)
              > at weblogic.common.internal.PeerInfo.<init>(PeerInfo.java:49)
              > at weblogic.common.internal.PeerInfo.<init>(PeerInfo.java:43)
              > at weblogic.jms.frontend.FEBrowserCreateRequest.<clinit>(FEBrowserCreateRequest.java:98)
              > at weblogic.jms.client.JMSSession.createBackEndBrowser(JMSSession.java:1750)
              > at weblogic.jms.client.JMSQueueBrowser.<init>(JMSQueueBrowser.java:46)
              > at weblogic.jms.client.JMSSession.createBrowser(JMSSession.java:1344)
              > at com.gallup.scheduler.services.MessageStatusHandler.checkAndEmailStatus(MessageStatusHandler.java:192)
              > at com.gallup.scheduler.services.MessageStatusHandler.handleAlarm(MessageStatusHandler.java:80)
              > at com.jalios.jdring.AlarmManager.notifyListeners(AlarmManager.java:357)
              > at com.jalios.jdring.AlarmWaiter.run(AlarmWaiter.java:110)
              > at java.lang.Thread.run(Thread.java:479)
              

  • More than maximum 5 filtered album lists trying to register. This will fail,Why i am getting this error when i pick video from Photo library.

    I am able to pick 4 videos from the Photo library in my iPhoneAPP but when i try to pick 5th one it throws an error:
    "More than maximum 5 filtered album lists trying to register. This will fail,Why i am getting this error when i pick video from Photo library."

    Hello Tate r Bulic
    I don't have any idea how to remove this error,can i pick more than 5 videos from the photo library...
    If it's then please help me and gimme idea..Thanks

  • I get this error when trying to run iCloud- Error: 0x80040604: Up/POST:Conflicts

    Why do I always get this error when trying to upload Outlook data to iCloud (Win 7 & Outlook 2007) Error: 0x80040604: Up/POST:Conflicts???
    I have deleted an reinstalled iCloud and still can't get past the error.

    have you seen this KB article: http://support.apple.com/kb/HT1398 ?
    JGG

  • Why do I get This message when trying yo import my pictures?

    Why do I get This message when trying yo import my pictures?
    The operation couldn’t be completed. (com.apple.ImageCaptureCore error -9912.)
    Please help, Thanks

    What version of iPhoto are you using and from where (and how) are you trying to import the photos? 
    As a first fix attempt try this:  launch iPhoto with the Option key held down and create a new, test library.  Import some photos and  see if you get the same message.  If you don't then the problem lies with your current library.
    OT

  • I keep getting this error when trying to backup time capsule with time machine. The backup disk image "/Volumes/Data-1/Dan's iMac.sparsebundle" is already in use.

    I keep getting this error when trying to backup time capsule with time machine. The backup disk image “/Volumes/Data-1/Dan’s iMac.sparsebundle” is already in use.

    Make sure that no other Macs are backing up at the time.
    Pull the power cable from the back of the Time Capsule
    Count to ten
    Plug the power cable back into the back of the Tme Capsule
    Wait a few minutes, then try a backup again.

  • I get this error when trying to create a ringtone - iTunes could not connec

    I get this error when trying to create a ringtone:
    "iTunes could not connect to the iTunes Store - an unknown error occurred (11556)"
    But I CAN connect - if I click on the iTunes Store, it connects right away.
    I want to make a ringtone from a song that I purchased, but all I get is the same error message.
    iTunes 9.2.2, Ireland iTunes Store.

    have you seen this KB article: http://support.apple.com/kb/HT1398 ?
    JGG

  • There was an error installing this update. Please quit and try again later. Error Code: U44M1I210  I keep getting this error when trying to update

    There was an error installing this update. Please quit and try again later. Error Code: U44M1I210  I keep getting this error when trying to update

    Hi,
    You can visit Error U44M1I210 | Install updates and see if it works.
    Regards
    Kishan

  • Why am i getting an error when trying to download ios6

    Why am i getting an error when trying ios6

    I have no idea. Don't think anybody else will be able to figure it out either from the information you have provided.
    Might help if we knew the error message and/or number. It is a start anyway.

  • Why do I get this error when I want to run a test using Ant?

    Why do I get this error when I run the Ant build file?
    Testsuite: JUnit
    Tests run: 1, Failures: 0, Errors: 1, Time elapsed: 0 sec
    Caused an ERROR
    JUnit
    java.lang.ClassNotFoundException: JUnit
    at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:316)
    at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:280)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
    at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:374)
    at java.lang.Class.forName0(Native Method)
    at java.lang.Class.forName(Class.java:242)
    at org.eclipse.ant.internal.ui.antsupport.EclipseDefaultExecutor.executeTargets(EclipseDefaultExecutor.java:32)
    at org.eclipse.ant.internal.ui.antsupport.InternalAntRunner.run(InternalAntRunner.java:423)
    at org.eclipse.ant.internal.ui.antsupport.InternalAntRunner.main(InternalAntRunner.java:137)

    Abder-Rahman wrote:
    In the "XML" file, I was giving the name of the test as JUnit ---> <test name="JUnit">Well, do you have a class called just "JUnit" that contains a test?

  • I have Photoshop CS5.1 (bought in 2011). The photoshop Camera Raw plug-in is not recognizing the format of my new Nikon D610. I updated the version of my Camera Raw plug in and am still getting this message when trying to open images in photoshop. Please

    I have Photoshop CS5.1 (bought in 2011). The photoshop Camera Raw plug-in is not recognizing the format of my new Nikon D610. I updated the version of my Camera Raw plug in and am still getting this message when trying to open images in photoshop. Please help.

    This link shows that ACR 8.3 supports the Nikon D610 and 6.7.1 was the final version for CS5.
    Camera Raw plug-in | Supported cameras
    So you can upgrade to CS6 and ACR 8.7.1
    or using the DNG converter, convert your Nikon raw files to dng format to open in CS5.
    Here is the download link: Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.7.1
    or Windows: Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.7.1
    And here is a great video tutorial on how to use the converter.
    https://www.youtube.com/watch?v=0bqGovpuihw
    Gene

  • Keep getting this error when trying to skype... i ...

    http://puu.sh/cTXLk/0df5219d2f.png - keep getting this error. i tried downgrading from 6.2 to 6.1 and still getting it....

    Make sure that no other Macs are backing up at the time.
    Pull the power cable from the back of the Time Capsule
    Count to ten
    Plug the power cable back into the back of the Tme Capsule
    Wait a few minutes, then try a backup again.

  • I get this error when trying to compile a plain C++ project

    Tool:0: Couldn't run '/usr/bin/gcc-3.3' because it does not refer to an accessible executable.
    I get this error when I try to compile/build a normal C++ project.
    I make a new project. C++ tool. Call it "test"
    It automatically makes a main.cpp file which should output "hello world" but instead I get that error above. Not sure what is going on.

    I'm not sure where the "verbose" icon is, but I did get this, if it helps
    Native Build of Target "Test" using Build Style "Development"
    CompileC build/Test.build/Test.build/Objects-normal/ppc/main.o main.cpp normal ppc c++ com.apple.compilers.gcc.3_3
    cd /Users/Eric/Documents/Test
    /usr/bin/gcc-3.3 -x c++ -arch ppc -pipe -Wno-trigraphs -fpascal-strings -fasm-blocks -g -O0 -Wreturn-type -Wunused-variable -fmessage-length=0 -ffix-and-continue -mtune=G5 -Wp,-header-mapfile,/Users/Eric/Documents/Test/build/Test.build/Test.build/Test .hmap -F/Users/Eric/Documents/Test/build -I/Users/Eric/Documents/Test/build/include -I/Users/Eric/Documents/Test/build/Test.build/Test.build/DerivedSources -c /Users/Eric/Documents/Test/main.cpp -o /Users/Eric/Documents/Test/build/Test.build/Test.build/Objects-normal/ppc/main. o
    And my version of Xcode and such is..
    Xcode 2.0
    Xcode IDE 514.0
    Xcode Core 515.0
    ToolSupport 514.0
    Not sure about the SDK.
    iBook G4 and iPod Mini Mac OS X (10.4.5)

Maybe you are looking for

  • How Do I Change the Padding in Table Cells

    Hi, I am trying to set up a table that will allow text to fill the entire cell. I know that if I double click an individual cell, the left and right boundaries of the cell will be displayed on the ruler. However, I can't select multiple cells (even i

  • Why can't Safari save anything?

    If I can view an image, why not allow the browser to save it? Same goes for videos supported by the iPhone. Just seems silly ... though I suppose it allows further content control and all that ... but c'mon. :\

  • Equivalent of this Thu Mar 10 00:00:00 EST 2005

    Thu Mar 10 00:00:00 EST 2005 in format like (mm dd yyyy)

  • Solaris 8 DLPI issues

    Is anyone aware of any DLPI issues specific to Solaris 8(Beta Refresh 2). In this case,"ifconfig x0 plumb" fails for a pseudo driver in Solaris 8, while the same works fine in Solaris 7. This is a style 2 DLS provider, and it appears that DL_INFO_REQ

  • Hardware test macbook pro mavericks

    Does anybody know how to make hardware test on a Macbook pro on Mavericks?