Why are Adobe Premiere Pro CS6 source and program monitors playing each others footage?

Why are Adobe Premiere Pro CS6 source and program monitors playing each others footage? I import my footage into the project like normal. I drag it to the source monitor on the left hand side to set in and out points then I drag it to the time line. The footage drops into the time line with no problem but when I go to play the footage in the time line it plays back on the source monitor and not on the program monitor like it is suppose to. Other times ill drag the clip to the time line and trim it there and it will be fine and show up on the program monitor.  Then ill go try to set a clip to have in and out points (which is suppose to show up in the source monitor) but it shows up in the program monitor. The clip is not even in the time line it should not be on that monitor! I have updated the program to the late update. I have re installed the program numerous times and I have even ran the Adobe Clean up program. Couldn't find much on this problem. Please help thank you! I have a PC. My computer is also way over the recommended minimum specifications to have the program installed on.

Definitive Answer (I believe): It's all about this setting, "Write XMP ID To Files On Import" - which confirms that Adobe Premiere Pro is deliberately modifying the .mov file: http://helpx.adobe.com/premiere-pro/using/preferences.html#WSE3BD4A43-7022-4fe6-97F5-95313 935347B
These posts give some background as to why having this setting enabled would be beneficial: one benefit being to be able to skip conforming files by matching the conformed file with the original using the embedded XMP tag :-
http://helpx.adobe.com/premiere-pro/using/preferences.html#WSE3BD4A43-7022-4fe6-97F5-95313 935347B
http://www.dvinfo.net/forum/adobe-creative-suite/498627-why-premiere-modifying-video-files .html
https://forums.creativecow.net/thread/205/876064
(Found using Google search term "adobe premiere pro date modified")

Similar Messages

  • Premiere Pro CC Source and Program Playback Controls not working.. help please.

    Hi,
    Need your help to find out why none of the Premiere Pro CC Source and Program Playback Controls are working.. I can do playback using spacebar, but not clicking on the controls... same goes the rest.
    Thank you,
    Mauro

    Dear Mark,
    Thank you for the hint/link, reseting the toolbar did the trick.
    Regards,
    Mauro

  • NVIDIA GPUs for Adobe Premiere Pro CS6 | NVIDIA and Adobe Solutions | Adobe TV

    Sean Kilbride from NVIDIA talks about how Adobe Premiere Pro CS6 and NVIDIA GPUs were used in the editing of the Heavy Hand music video.
    http://adobe.ly/QaVPwR

    I'm playing around with the trial of CS6 right now. At first I wasn't getting the option to use GPU rendering until I added my card to the supported list (GeForce GTX 670). Unfortunately my playback is still laggy, just like when it was on software mode. I'm trying to watch 1080 video that I recorded using software on my computer.
    I have an i5 2500k at 4.3GHz, 8GB ram, and two 670s in SLI.
    I have premiere pro cs6 running on my main SSD, and my scratch disks set to my single platter 7200 RPM hdd. In the past on CS5 I was able to have my scratch disks set to the drives I have the original files on with no lag.
    What can I do to get smooth playback?

  • Why does adobe premiere pro cs6 capture HVD TO .mp3 format?

    Please help me

    More information needed for someone to help... please click below and provide the requested information
    -Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
    Exactly WHAT are you capturing, and HOW are you doing so?

  • Adobe Premiere Pro CS6 Title Temlpates?

    Why does Adobe Premiere Pro CS6 have the same tired titling templates as version 2? where can I find more?  In a fast paced, public access tv environment, we don't have the luxury of spending two hours creating some dazzling after effect.

    Anyone can make these, so Google for "Style library". I found this fairly effortlessly : http://www.stevengotz.com/title_styles.html.html. Not sure if they are dazzling though ...

  • Installation of Adobe Premiere Pro CS6

    Hi, I recently bought my Adobe Premiere Pro CS6 online and tried to follow the guide. However, I am unable to install and get pass the 'install a trial' page. Followed the steps below but stuck at step 3. Please help me as soon as possible!
    Follow the steps and your installation will be done within 5 minutes!
    1. Disconnect from Internet (important!)
    2. Click on the "Adobe Premiere Pro CS6.dmg" file and open the installation inside
    3. When installer opens, click "Install a trial (I want to try Adobe Premiere Pro CS 6 Family for a limited time"
    4. Click "Accept" > "Install" (Choose only Adobe Premiere Pro CS6)
    5. After installing, go to your applications and open up Adobe Premiere Pro CS 6.
    6. The Premiere Pro application will open together with a pop up window, click "Start Trial"
    7. Choose a new project, and once Premiere Pro has been opened, close the application
    8. Go to "Mac Patch (MILK Design Studio)" folder, right click and copy "amtlib.framework"
    9. Go to your "Applications" (side tab under finder), click on "Adobe Premiere Pro CS6", and right click on "AdobePremiere Pro CS6" and select "Show Package Contents"
    10. Click on "Contents" > "Frameworks" and paste the file. Select "Replace".

    You bought a counterfeit, pirated copy.  Get a refund, quickly, if you can.
    Protect Yourself From Pirated and Counterfeit Software | PHOTOSHOP.COM BLOG

  • Why does Adobe Premiere Pro modify original footage/asset files (e.g. mov)? (CS6)

    Background:
    A colleague had given me a large 33Gb .mov for use in a project, I put this file on a backup drive.
    I made an identical copy of this 33Gb .mov file and placed it in a folder that I'd use to work on a Premiere Pro Project.
    I ran Adobe Premiere Pro CS6 and dragged in the 33Gb .mov file into the Sequence (imported it)
    Premiere Pro CS6 started conforming the file.
    After it had finished, I noticed that it's Modified Date was just now i.e different to the Modified Date on the original copy of the file on the backup drive (see step 1)
    I ran a BeyondCompare check between the .mov file on the backup drive (see step 1) and the one that the Premiere Pro project was using (step 2, 3) and Beyond Compare reported they were different.
    I had initially thought it was unrelated file corruption of some kind, but I have checked this several times and got the same outcome, so it's definitely Premiere Pro deliberately modifying the file.
    So I am puzzled: these are supposed to be the same file.
    Why would there be a need for Adobe Premiere Pro to modify the footage?
    What does it do to the file?
    Would it not be better to create a separate file if necessary?
    I can accept this if that's how it works and it's good to know that it was Premiere Pro deliberately modifying the files and not corruption (so my hardware ought to be healthy). But it makes more sense to me if Premiere Pro made separate modified copies for its own use. Modifying the file as it does hinders my process for checking the integrity of backups; if the original asset footage files were the same as earlier copies then it would be easy to know that the backups are OK.
    Thoughts?

    Definitive Answer (I believe): It's all about this setting, "Write XMP ID To Files On Import" - which confirms that Adobe Premiere Pro is deliberately modifying the .mov file: http://helpx.adobe.com/premiere-pro/using/preferences.html#WSE3BD4A43-7022-4fe6-97F5-95313 935347B
    These posts give some background as to why having this setting enabled would be beneficial: one benefit being to be able to skip conforming files by matching the conformed file with the original using the embedded XMP tag :-
    http://helpx.adobe.com/premiere-pro/using/preferences.html#WSE3BD4A43-7022-4fe6-97F5-95313 935347B
    http://www.dvinfo.net/forum/adobe-creative-suite/498627-why-premiere-modifying-video-files .html
    https://forums.creativecow.net/thread/205/876064
    (Found using Google search term "adobe premiere pro date modified")

  • Adobe Premiere Pro CS6, Toshiba Qosmio and GoPro issues...

    Adobe Premiere Pro CS6 and GOPRO hero 3 mp4 videos. I am getting choppy play back and choppy scrubbing. My current setup is a Toshiba Qosmio x875-Q7390 Laptop. The laptop has an i7 processor, 16 gigs of ram, Nivida GTX670M video card with CUDA and 3 gigs of deticated ram, 2- 1TB HD's at 5,400 rpm and 4 3.0 USB ports. For  setting up my scatch discs I use the C drive for software, the D drive for video and an external USB 3.0 device for playback. I did notice that Adobe doent have the drivers for my video card (so using the full potential of my card is not gonna happen), and my hard drives may be on the slow side, but play back is way slow and choppy just like on my older Toshiba i5 sattelite. If I replace my drives with 7200 rpm's will this help? Oh I forgot to mention that my C drive is a hybrid so a few gigs are solidstate.

    You still want to apply the hack in order for Premiere Pro to use your card for GPU acceleration.
    With Premiere Pro closed, delete the following file. Then reopen Premiere Pro and in Project Settings, ensure that you have it set for CUDA.
    C:\Program Files\Adobe\Adobe Premiere Pro CC\cuda_supported_cards.txt

  • "We are unable to validate this serial number for Adobe Premiere Pro CS6 Family."

    I have bought and obtained a license serial number for Premiere CS6.
    I have downloaded the files for Premiere CS6
    PremierePro_6_LS7.exe                    PremierePro_6_LS7.7z
    PremierePro_6_Content_LS7.exe     PremierePro_6_Content_LS7.7z
    I have run PremierePro_6_LS7.exe and, having specified load with serial number, reached the point of entering the serial number.
    "We are unable to validate this serial number for Adobe Premiere Pro CS6 Family."
    I have checked my account and the license is on file.
    The serial number is 24 digits in 6 groups of  4 characters.
    Please provide an answer to this.
    I've been using Adobe Premiere since 2006 and currently have CS5.5.
    This is the first time I have had problems trying to download and set up a version.
    It has taken most of the day so far!
    Peter
    CS6 END USER ID                       22298999
    End User Name                           PETER JONES
    Previous records under              PETER FENNELL-JONES

    No problems with CS5.5
    I have not tried removing it (not until I have CS6 sorted)
    Windows 7 Pro (64 bit)
    I have installed CS6 in trial mode and entered the license number.
    The Serial number appears to have been accepted.since Encode now starts up without a license message.

  • Kindly explain the exact configuration of Video Editing Suite: Adobe premiere pro CS6.1, its price in India and if it is also equipped to edit photographs

    Kindly explain the exact configuration of Video Editing Suite: Adobe premiere pro CS6.1, its price in India and if it is also equipped to edit photographs too.

    This is a user to user forum.  We are not Adobe.  For pricing information, you need to contact Adobe Sales in India.
    Premiere Pro is just for editing video.  Photoshop or Photoshop Elements is for editing photographs.

  • I have received the message "Adobe Premiere Pro CS6 Family has been successfully Installed and is re

    I have received the message "Adobe Premiere Pro CS6 Family has been successfully Installed and is ready to use." but I cannot find the program on my computer.

    Hi corinne.blake.1991
    Go to Control Panel -> Program and features -> See if the programs are listed there ...This is for Windows ...

  • Difference between adobe premiere pro cs6 and cc

    Whats the basic difference between adobe premiere pro cs6 and adobe premiere pro cc?

    http://helpx.adobe.com/premiere-pro/using/whats-new.html
    This shows you what's new in Premiere CC 2014, and you can use the links on the left side of that page to see earlier updates.
    (CS6 is an old version, which was followed by CC and CC 2014)
    And of course CC is subscription based and CS6 is a program you used to be able to purchase and own forever.

  • Why does Adobe Premiere Pro CC 2014 cannot detect and install BlackMagicDesign's UltraStudio 4k?!

    I have the new MAC Pro and I installed Adobe Premiere Pro CC 2014 few days ago.
    I have the UltraStudio 4K by BlackMagicDesign connected through ThunderBolt.
    BUT...
    Premiere Pro CC cannot add it to the device control.

    Did you install the UltraStudio Device driver before Adobe Premiere Pro CC 2014 or after it ?
    Martin

  • 'Adobe Premiere Pro CS6 couldn't find any capable video to play modules' What should i do?

    Hi
    I've been having some troubleshooting with adobe premiere pro cs6.
    I've tried everything from reinstalling it, to changing the bios properties, and i don't know what else should i do.
    I have a Dell Vostro with an intel core i7 and a amd radeon 7600M graphics card.
    What Should i do?

    Do you have dual graphics adapters?
    Go to the Windows Control Panel and select Hardware and Sound and then select Device Manager... In Device manager you click the + sign to the left of Display Adapters... and see if 2 are listed
    IF YES, read below
    -http://forums.adobe.com/thread/1001579
    -Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
    -link to why http://forums.adobe.com/message/4685328
    -http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2

  • Adobe Premiere Pro CS6 classroom in a book lesson files "file format not supported" error message

    Hey y'all. I have the creative Suite cloud membership and am learning Adobe Premiere Pro CS6 and have the latest update. I have an iMac, version 10.8.2 and have been going through the lessons 1-8 so far from the 'Adobe Premiere Pro CS6 Classroom in a book' with no problems. So far so good. Then, when I opened Lesson 9 project today, I realized that certain media was off line (see pic below-videos and maps) even though I had been able to open the project. I tried to see if it was a link issue but was unable to select the 'Link Media' option and the system did not give me the option to link media when opening a new project. The strange thing is that I am now able to open some lessons with everything working fine but when I try to open other lessons such as lesson 9 or 10 or 11 I notice media files offline after getting the "file format not supported" pop-up error message when attempting to open a project. It's random as some lessons I had opened previously now give this error message of file format not supported when they didn't in the past whilst others work. I have deleted all the lesson files from my hard drive and reinstalled them from the cd onto my hardrive but the issue persists. Any idea as to why all of a sudden Adobe Premiere Pro CS6 is giving the error message "File format not supported"??? when opening the lessons. I have not changed any preferences. I've included some screenshots though I don't know how much help they will be... Is anyone else running into this issue??? Can anyone help???
    NEVERMIND. I FOUND OUT ON MY OWN WHAT THE ISSUE WAS AND IS NOW FIXED. YAY!

    Why were you trying to link a file in the project to the project file itself? Shouldn't it be a video file or something? Like .mov .wav .avi .mp4 and not .prproj

Maybe you are looking for