Why Are Password Protected Forms not Fillable on Reader App

I have made a fillable form on Acrobat X Pro that is protected with password security in order to deny printing or editing (other than filling the form and commenting), however the app will open but will not allow you to fill it. The document's forms are fillable on any other computer. How can this be fixed?
It is reader version 10.4.1 on a Asus Transformer TF300T android Ver 4.1.1

As you have discovered, Adobe Reader for Android does not yet support filling encrypted forms. It is something we are considering for the future, but I cannot give any insight into when we will have that support available.

Similar Messages

  • Why are Links and forms not working in mobile safari?

    Why do links and forms on the site I am designing not work in mobile safari? They work fine in desktop browsers.
    The controls change state when focused, so it's not that they're being blocked, they simply don't activate. Behavior tested and observed on iPad running iOS 6.1.2 and iPhone running iOS 7.0.2.
    Reference: http://gilli.co/test.html

    I had the same problem but I just found a solution. Siri mistakenly suggests to enable reminders (which you should), but the setting that enables all these, is under System Services (on the bottom of the page) -> Location Based Alerts. I had deactivated it alleviate battery problems and had forgotten about it. Hope this helps!

  • Form is fillable in Reader but not in Acrobat

    I created a fillable, saveable, password protected form in LiveCycle Designer 9.0. It works as intended if opened with Adobe Reader 9 and Adobe Acrobat X. But when I email it to myself at work and open it in Adobe Acrobat 7.0 Pro, it's still password protected, but not fillable. Why is this?
    I have a previous incarnation of the form that does work correctly in both Reader 9 and Acrobat 7 Pro. Somewhere along the way I made some changes and now it doesn't work. Anyone know what I might be doing wrong?

    Hi,
        Interactive PDFs created in Adobe Livecycle will work with the target version, which will be configured at File > Form Properties > Default: Choose version to run form.
       In you case what i assume (bad to say) but, you have created a PDF that works with Target version 9 or later for both Acrobat and Reader. So, when this sort of PDF form is opened in the earlier version, it provides undesirable results, and will not work properly. (For every new target version Adobe provides new functionalities to create PDFs.)
    and as per the password, Adobe Acrobat has already provided with the security features in it, it works.
       So, Create an Interactive PDF on setting the target version 7.0.5 or later, and i think that should work.
    Apologize, in case i am misunderstanding your question.
    thanks,
    Rajesh

  • My adobe account was hacked and compromised, emails were sent out on one of my accounts.  I changed my adobe password, when I scan my computer, some adobe files are password protected and can not be scanned, is this normal?

    my adobe account was hacked and compromised, emails were sent out on one of my accounts.  I changed my adobe password, when I scan my computer, some adobe files are password protected and can not be scanned, is this normal?

    I have contacted them, but apart from letting them look at it and deal with it, is there anything I can personally do myself? Or is it just a matter of waiting for me now?

  • My adobe/ PDF documents are password protected. How can I remove the password?

    @My adobe/ PDF documents are password protected. How can I remove the password?

    Hello,
    two answers I found in my library about removing or finding unknown password:
    Removing: "Not with any Adobe products, and other products are not discussed on these forums..."
    Open a file: "The only way to open a password protected file is to know the password (there's no way to get around that). Hopefully you know who created the PDF and can get the password from them."
    Hans-Günter

  • How to password protect a NOTES document

    How to password protect a NOTES document

    Or, use a different application for your notes that does allow password protection. SimpleNote is one that springs to mind but there are many, many others.

  • Why are the jpeg icons not visible in finder when created by PS6

    Why are the jpeg icons not visible in finder when created by PS6

    hi
    I have faced the same problem ... I didn't find the solution yet
    but please visit this link http://www.oracle.com/technology/products/forms/pdf/webicons.pdf
    you'll get everything you want to know
    I'm not try it yet.
    Best wishes

  • Why are my exported files not going to me email?  I have used 3 different ones.

    Why are my exported files not going to my email (receipts & business card)?  I have used 3 different ones...2 yahoo and 1 hotmail.  I have checked spam box also.

    For the Receipts app I chose to export the info as a PDF file..an email was requested..I entered info and clicked send.  For the Business Card app I chose Send, not Print..an email was requested..I entered info and clicked send.  I haven't received anything, not even in my spam folder.

  • Why are my five websites not showing up in my CC browser window - CC Account Panel?

    Why are my five websites not showing up in my CC browser window - CC Account Panel?
    I have a full account!
    g

    Gmpulaski which web sites are you referring too?  Is it the five Business Catalyst sites included with your membership?

  • Why are my video edits not being saved on Photoshop CS6?

    Why are my video edits not being saved on Photoshop CS6?
    I made a TON of edits in a video group, then duplicated that group into another file... and all my edits are gone.
    I spent hours working on this, so please let me know what the hell happened and how I can make sure it never happens again...
    also--why would CS6 come with such a devastating feature?!?! Who came up with this???

    Welcome to the forum.
    I did not see any reference to Save, Save_As, or Save_As_a_Copy. Did you use one of those?
    Good luck,
    Hunt

  • My time capsule is full and when I attempt to back up, I only receive a preparing back up message and the earliest and most recent back up dates remain the same.  Why are the oldest backups not being deleted to make room for the newest backups?

    My time capsule is full and when I attempt to back up, I only receive a preparing back up message and the earliest and most recent back up dates remain the same.  Why are the oldest backups not being deleted to make room for the newest backups?

    linda mariefromharper woods wrote:
    My time capsule is full and when I attempt to back up, I only receive a preparing back up message and the earliest and most recent back up dates remain the same.  Why are the oldest backups not being deleted to make room for the newest backups?
    It may be in the process of making room.  What version of OSX are you on?    (That process can be excruciatingly slow on Leopard or Snow Leopard backups over a network;  Lion has improved it greatly.)
    A clue may be lurking in your logs.  Use the widget in #A1 of  Time Machine - Troubleshooting to display the backup messages from your logs.   That should help you figure out what's going on.  If in doubt, copy and post them here (but if the same ones repeat over and over, drop most of the duplicates).
    If you can, connect via Ethernet; it will be 2-3 times faster.

  • Why are my mins usage not on line its been about a mouth now

    why are my mins used not on line,it has been about a month now. it shows message that i don't even have

    Here are a few things that you check and can try.
    Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
    If that doesn't work - sign out of your account, restart the iPad and then sign in again.
    Settings>Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Go back to Settings>Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
    You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again.
    You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your app preferences and device settings again.

  • Settings: Why are basic webservices settings not included (i.e. OneDrive behavioural settings are hidden in the system tray)?

    What is the idea of a new control panel if you can not in fact get an overview or kind of dash board?
    Settings includes PC+Cloud, i.e. Accounts let you do settings for the cloud, i.e. connect to your live account.
    But why are basic webservices settings not included (i.e. OneDrive settings is in the system tray)?
    Great consolidation is happening now between settings, control panel - i.e. getting rid of obfuscation, blur and complexity between legacy settings (control panel) and actual kind of settings. However do not recreate the problem by leaving the
    next step of integrating cloud settings across the middleware. What is the idea of a new control panel if you can not in fact get an overview or kind of dash board?

    Hi,
    Interesting issue, what about other configuration or settings? Do they work fine or keep reverting after a reboot? Have you tested this issue in another user account? What is the result?
    Regarding to unable to save settigs for current user hive, I doubt whether there's an application you installed recently or an malware\virus changes the permission of registry entry or value of registry keys like
    HKCU\Software\Classes which causes this issue.
    Yolanda Zhu
    TechNet Community Support
    Hmm... I don't understand. Nothing is reverting after a reboot, as well I'm
    not unable to save settings in the current user's hive. The correspondent registry keys can be saved perfectly fine and they are
    deleted, not reverted after a reboot. I pointed to the exact code that does it, the code is located in Microsoft DLL with all certificates and digital signatures intact. Permissions obviously don't matter, since svchost.exe is executed with the highest
    integrity level and under the System user account, the keys in question inherit permissions, which allow System to do whatever it needs without restrictions
    by default, you can't change it to allow more.
    So can you explain how it can be some malware?
    The issue is intermittent, I don't have a 100% repro, therefore “testing” under another user account is doubtful.
    Dei nostra Matrix est.

  • Why are my Whatsapp photos not showing in the Camera Roll? I have checked all the settings and everything seems ok.

    Why are my Whatsapp photos not showing in the Camera Roll? I have checked all the settings and everything seems ok.

    Have you enabled "Save incoming Media"
    in your whastapp\Setting\Chat setting\Save Incoming Media?

  • HT4098 Why are auto-renewing subscriptions not available in Israel?

    Why are auto-renewing subscriptions not available in Israel?
    Are non-renewing subscriptions available for Israel?

    Apple has not said why. The terms of use of this forum includes:
    Stay on topic. Apple Support Communities is here to help people use Apple products and technologies more effectively. Unless otherwise noted, do not add Submissions about nontechnical topics, including:
    Speculations or rumors about unannounced products.
    Discussions of Apple policies or procedures or speculation on Apple decisions.
    It handled on a country by country basis

Maybe you are looking for

  • Difference between closing the connection before and after committing user transaction?

              I was wondering what's the difference between closing the connection before committing           the transaction versus closing the connection after committing the transaction?...           for e.g....           Scenario 1.........         

  • Policy based routing on VRF interfaces to route traffic through TE Tunnel

    Hi All, Is there a method to do policy based routing on VRF interfaces and route data traffic through one TE tunnel and non-data traffic through another TE tunnel. The tunnel is already build up with these below config interface Tunnel25 ip unnumbere

  • ParallelElement in a series

    Hi, is it possible to play parallel elements in a series by adding a ParallelElement to a SerialElement? I mean I already tried this and it didn't work out. But maybe I used a wrong way. parallelMedia = new ParallelElement(); serialMedia = new Serial

  • Sound level goes to z

    Sound level goes to zero after short period of time such as (5) minutes. I reinstalled drivers for the sound card, which is a pci6. Does anyone have any idea what can be turning off my sound? If I reboot then my sound will work for a very short time.

  • Firefox & Thunderbird plantent sans message d'erreur, rien ne résout le problème

    Bonsoir, Ayant décidé de revenir a Firefox, j'ai supprimé (proprement) ma vieille version de Firefox et installé la dernière release. L'installation se fait sans soucis apparent. Firefox ne se lance absolument pas et n'affiche aucun message d'erreur