Why are TypeKit fonts not displaying correctly in Pages (iWork)?

I have just subscribed to TypeKit and am experiencing highly peculiar behavior from the two fonts I’m using in Pages (iWork): Basically, fonts in my document don’t respond appropriately to requested changes in style. For example, if I increase the point size by one point using the the formatting commands built into Pages, the font drops a point size. I’ve had the same experience using the kerning command, where the kerning decreases when I have set it to increase. (So far, the only fonts I’ve been using have been Futura PT and Proxima Nova.)
Look at the example in the screenshot: “FEATURED EXPERT” on the top line shows in Pages as being 24pt Futura PT Book. However, “SOLO,” a few lines down, which is definitely displaying as smaller, shows as 25pt Futura PT
In a potentially related issue, when I reopened this same document today, text boxes were suddenly too small for the text (again in Futura PT and Proxima Nova). It was as though Pages was suddenly reading those two fonts differently.
I have had no issues with other (non-TypeKit) fonts in the same document.
Anyone else experiencing anything similar? Any suggested fixes? I'm reluctant to unsync/resync the two affected fonts (the only ones I have sync'd to date) because I don't want to wreck the document!

Thanks, Christopher. After I posted my original question, I did come to realize that it was Helvetica not Future PT showing. Here’s what happened, and here’s why I still need some guidance…
The document dropped Future PT because when my wifi signal dropped, the Creative Cloud app displayed this error symbol (see graphic) in my menu bar.
At that point, my computer could no longer access my TypeKit fonts and the document reverted to the system's Helvetica default.
This was not an isolated incident.
If I turn wifi off manually, there is no issue and CC continues to operate in the background as it should, with TypeKit fonts still available.
However, if the wifi drops out on its own, I get the above error symbol and I then lose access to my TypeKit fonts. Very rarely, the CC app will self-correct when the signal is restored. More often than not, I must quit the CC app and relaunch it in order to get things back to normal.
This doesn’t strike me as normal behavior Have you ever encountered anything like it? Do you know of a fix that will allow the CC app to self-correct when the wifi signal is restored?
Any assistance will be appreciated!
Thanks!
P.S. TypeKit troubleshooting doesn’t address this particular issue.

Similar Messages

Why exchange rate is not displayed correctly when I create the PO in SRM?

Hi Gurus,
Yesterday I insert a new row at OB08 tx. at backend system (R/3) for exchange rate of May 17,2010, the value was 10.00. Then I run the BBP_GET_EXRATE program to replicate the info to SRM.
But when I created a purchase order (PO) the value was 12.24 for exchange rate (this value 12.24 is the value for the previous day May 16, 2010).
Today morning (May 18, 2010), I inserted another row at R/3 and replicated to SRM, the new value for May 18 was 11. I create another PO and the value was 10 for exchange rate (the value for yesterday).
But when the PO is transmitted to R/3, the exchange rate is the correct.
My question is: Why exchange rate is not displayed correctly when I create the PO in SRM? Exists an aspect of memory in SRM that it has to be refreshed? Why SRM is getting the exchange rate for yesterday? Is an issue for time zone?

Hi Muthu,
I'm in Extended classic.
I already discovered what is happening. At the time of being creating the purchase order (PO), it takes the exchange rate of the delivery date of the shopping cart (SC). But when the order is authorized and tries to transmit it to R/3, it takes the exchange rate of the date of creation of the PO.
Two checks of budget exist:
1.- When creating PO (exchange rate date of delivery date of the SC's item)
2.- When authorized and tries to transmit it to R/3 (exchange rate date of creation date of the PO)
If exchange rate of delivery date of the SC is lower than exchange rate date of creation of the PO, there are cases in which it is marking budget error.
Now my question is: It is a standard behavior? (to take different exchange rate)

Why are animated gifs not displaying animations in the preview?

Why are animated gifs not displaying animations in the preview?
My coworkers and I are not seeing a animation in the preview pane in Adobe Bridge CS6 even when clicking the play button in the preview window. However, we do see a graphic of the first frame and one person sees 1 frame when clicking play and one other frame and then the animation stops, however, that is not the complete animation.
I'm using Windows 7 32 bit
My coworkers are using a mac.
One coworker has apple OS Mountain Lion with a Intel Quad-Core Xeon – 64 bit system.
Is this fixable or in the works as a patch? Otherwise we have to open these docs in a browser in order to view them properly.

I've just come to the realization that some animated gifs do play fine and others do not. A coworker of mine suggests that if it's an animation made via Adobe Photoshop, it'll work in bridge but will not if it's made using something else.

Why is the map not displaying correctly on "find my phone" I am getting large grid squares on the map

why is the map not displaying correctly on "find my phone" on my computer. I am getting large grid squares on the map. I have tried deleting my history, tried zooming in & out, but the grid squares won't go away..

Welcome to Apple Support Communities
It means that it is not connected to the Internet, so it may be turned off. Another option would be that somebody has resetted it to default settings and has changed the Apple ID, being impossible to track your son's iPhone. Anyway, report it to the police because it is the only thing you can do at the moment

Google fonts not displaying correctly since updating to Firefox 31.0

Since updating to Firefox 31.0, the vast majority of Google / web fonts are not displaying correctly, including icons that are being replaced with random characters. When I view the Google web fonts page, only a few display correctly, the rest just default to a sans-serif font.
- I've tried running in safe mode with no add-ons enabled.
- I've tried disabling all add-ons then re-enabling one by one.
- I've checked the tickbox in the font settings for 'Allow pages to use their own fonts' is ticked
Any help appreciated, it's got quite frustrating now.
Thanks, Greg

You can do a font test to see if you can identify corrupted font(s).
*http://browserspy.dk/fonts-flash.php?detail=1
You can try different default fonts and temporarily disable website fonts to test the selected default font.
*Tools > Options > Content : Fonts & Colors > Advanced
*[ ] "Allow pages to choose their own fonts, instead of my selections above"
You can check for problems with preferences.
You can check the <b>gfx.downloadable_fonts.enabled</b> pref on the <b>about:config</b> page and make sure that it is set to true (if necessary double-click the line to toggle its value).
Delete a possible user.js file and numbered prefs-##.js files and rename (or delete) the prefs.js file to reset all prefs to the default value including prefs set via user.js and prefs that are no longer supported in the current Firefox release.
*http://kb.mozillazine.org/Preferences_not_saved
*http://kb.mozillazine.org/Resetting_preferences
Create a new profile as a test to check if your current profile is causing the problem.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer files from a previously used profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over problems.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
Boot the computer in Windows Safe mode with network support (press F8 on the boot screen) as a test to see if that helps.
*http://www.bleepingcomputer.com/tutorials/how-to-start-windows-in-safe-mode/

Flash Animation: Font Not Displaying Correctly

Hi all!
I am having a problem with a Flash animation in Captivate that seems like it should be an easy fix, but I can't seem to figure it out.
I have a very simple Flash animation that I developed in CS5. It previews in Flash perfectly, play correctly in Flash Player, but when I insert it into Captivate 4 the fonts do not display correctly. Capital letters are missing as well as other letters.
It's not a matter of AS2 vs. AS3 as I have already tested that. It also is not a frame rate or version issue as I have confirmed they are the same rates and the same version.
Can anyone shed any light? Anyone else had this same problem? Any guidance or suggestions would be much appreciated.
Thanks!
Daniel
Screen shot:

Hi dmendoza2,
Did you embed your fonts into the flash animation? Make sure all characters necessary are embedded.
Jim Leichliter

URL parameter value with : not displayed correctly on page

Hi,
I am working on a page with an interactive report.One of the report columns is hyperlinked to another page (Delete Page).This link passes an id and a title to the Delete page such that its displays a confirmation message to the end user before actually performing the delete.If the title contains a ":" the text after the ":" is not displayed on the page (albeit visible in the URL on the top)
Is this because the ":" seperates parameters in an APEX URL and therefore the text after the ":" is taken as the next URL parameter?
How can we solve this problem?
Regards,
Priya Jetley

Hi
Yes - Apex will see the ":" as a parameter separator and will ignore everything after any that exist in the "with these values" parameter at the end of the url.
You can get around this in two ways:
1 - Escape your title - replace ":" with "%3A" in your sql statement
2 - Do not pass the title in the link but use a computation on the delete page to retrieve this value for display
Andy

Pictures in iBook are partial/missing not displaying correctly

I downloaded new iBook called "Foundation" and the pictures are incomplete/partial/missing. Tried deleting the book and re-downloading and still same problem. Some pictures are complete, some partial and some just have a question mark inside a blue box (where the picture is supposed to be i am guessing). There are also pages that have a large pink box that says ... "This page contains the following errors: error on line 1 at column 1: Ending error. Below is a rendering of the page up to the first error." I could live without the pictures but this is an exercise book and the pictures are very important! Any help is appreciated.

Thanks, Christopher. After I posted my original question, I did come to realize that it was Helvetica not Future PT showing. Here’s what happened, and here’s why I still need some guidance…
The document dropped Future PT because when my wifi signal dropped, the Creative Cloud app displayed this error symbol (see graphic) in my menu bar.
At that point, my computer could no longer access my TypeKit fonts and the document reverted to the system's Helvetica default.
This was not an isolated incident.
If I turn wifi off manually, there is no issue and CC continues to operate in the background as it should, with TypeKit fonts still available.
However, if the wifi drops out on its own, I get the above error symbol and I then lose access to my TypeKit fonts. Very rarely, the CC app will self-correct when the signal is restored. More often than not, I must quit the CC app and relaunch it in order to get things back to normal.
This doesn’t strike me as normal behavior Have you ever encountered anything like it? Do you know of a fix that will allow the CC app to self-correct when the wifi signal is restored?
Any assistance will be appreciated!
Thanks!
P.S. TypeKit troubleshooting doesn’t address this particular issue.

Hoefler text ornaments font is not displaying correctly in Pages

I've imported an existing document from Appleworks into Pages. I am using Hoefler Text Ornaments (HTO) font occasionally, using the pointing finger. Pages indicates that the font is HTO, but displays the following key: ']' which is the proper key to press in HTO to get the pointing finger. All the ornaments are missing. I've used keyboard viewer and indeed the viewer indicates that there are no ornaments only normal text.
I've confirmed that the font is named correctly, that the finger is part of the font, and that the original document displays correctly. I'm guessing that the HTO font is corrupted in Pages. What can I do?
Thanks very much for your help.
iBook Mac OS X (10.3.9)

Frank,
You're absolutely right. There's a button in the character palette labeled Favorites that will let you store glyphs. I think you and Gerry both have workable ideas. You can use the character palette or store special characters in a document.
A question, Gerry: why use another program to store the characters? Since the user is already working in Pages, why not create a Pages document, then paste in the character he/she might want to save? What am I not understanding about this?

Fonts not displaying correctly in Muse, working fine on upload. HELP! Working on Muse CC 2014, Mac OSX 10.9.4

Hello!
In Muse, my fonts are displaying incorrectly, when uploaded the fonts are correct. I am guessing this is a system issue. First time I have had this problem since making the jump to CC 2014 and it is making designing painful . I've updated everything, dumped and reinstalled the web fonts, restarted, cleared PRAM and scratched my head a bunch. I also tried to find a font cache to dump but could not locate it...any thoughts would be greatly appreciated. Thanks Musers! - Andrew

Re: Source Sans Pro not displaying in 'Design' mode
This did the trick for me. Thanks D Dog!

Symbol font not displayed correctly in WebHelp output

I have TCS 2. I have a character format that uses the Symbol font. It displays correctly in FM and in the RH Design Editor. But in the WebHelp output, the Symbol font displays as Arial. What did I do wrong?

Hi,
What browser are you using? Most probably, your browser does not support the symbol font out of the box and therefore defaults back to Arial. My guess is that it will work on IE, but not on other browsers. This is because Symbol isn't a default web font.
To overcome this, you must use the @font-face rule in your css and provide the font file as a baggage file in your project. For more info on @font-face, see: http://www.font-face.com/.
Greet,
Willam

Fonts not displayed correctly in Live View Dreamweaver CS4

I have a site that uses the Nuptial Script font.   Everything is displayed correctly in Design View and in IE and FireFox.
But LiveView does not display the font correctly; in fact, the text with Nuptial Script is not readable in LIveView.    If I change the font from Nuptial Script to Arial (yuck) as a test, LiveVIew displays the pages correctly.   Other fonts like Vivaldi work in LIveVIew. Nuptial Script does not work in LIveVIew.

lilbear34 wrote:
I have a site that uses the Nuptial Script font.   Everything is displayed correctly in Design View and in IE and FireFox.
This is display correctly for you in any browser because you have the font installed on your system. As far as I know, I don't have that script, so your page would not render as intended if I viewed it in either FFox or IE.
You need to set up a font-family when defining a non-web-safe font, so that if someone doesn't have your first choice of font, they'll be able to see it in another of your choosing (but needs to be web-safe).
More about web-safe fonts and what they are here:
Web Safe Fonts:
http://www.ampsoft.net/webdesign-l/WindowsMacFonts.html
Nadia
Adobe® Community Expert : Dreamweaver
http://www.perrelink.com.au
Unique CSS Templates | Tutorials | SEO Articles
http://www.DreamweaverResources.com
http://twitter.com/nadiap

Fonts not displaying correctly in Mail & Safari since updating to 10.4.5

On some of my downloaded email and some websites the fonts are displaying wrong! What's weird as I figured out that the font is called Brady Bunch which I don't even seem to have on my system or if I do I can't find it.
I figured out it was Brady Bunch by copy/pasting it into TextEdit and then went to Format > Show Fonts. It doesn't seem to effect Firefox browser.
My Apple mail (v2.0.5) preferences > Fonts & Colors > are all Helvetia. Safari (v2.0.3) Preferences > Appearance are Times 14 and Courier 12.
It looks really unprofessional replying to an email and the text I'm replying to is in Brady Bunch.
Can anyone help?
Josh

Re: Source Sans Pro not displaying in 'Design' mode
This did the trick for me. Thanks D Dog!

Korean font not displaying correctly. Internationalization Issue

Hello,
I'm not sure if this is an internationalization issue but I have an Adobe Air project that isn't displaying Korean correctly. I basically have created a MovieClip in Flash CC with a textfield child. When this movieclip is instanced in Air, it's text is dynamically assigned from a web service. The font used works fine except for Korean so we had to switch fonts when using Korean text. This is where things get interesting. If I try to programmatically change the textformat.font to use the Korean font, the font switches but just the Korean characters aren't supported. However if I set the textfield's font to the Korean one in Flash CC, everything displays fine. The font is embedding the same in both instances and is including 'All' characters.
I'm not sure if this is a bug or if I have to add a flag for Korean support somewheres in the build settings. I've created work around for now which has two textfields, one with the font we need and one for korean only. As the data from the webservice is parsed it detects for Korean characters in the string and if it finds them it makes sure the Korean textfield is used. Kind of a dirty way to do it but it doesn't seem to like changing the font family around.
Anyone else notice this?

It's the latest AIR 15 SDK with the Flex framework.swc and framework_fb.swf added for binding support
I overwrote the code since it was only a couple lines but here's what I was doing for the way that broke
var tf : TextFormate = this._sknPageShield.pageName.getTextFormat();
tf.font = "Arial Unicode MS";
this._sknPageShield.pageName.setTextFormat(tf);
The font changes because english characters showed up, however even though I click embed all fonts, korean characters do not display. I have to set the font on the textfield using the Flash CC tools and it works fine.

Typekit font not displaying in iPad DPS app (created by Indesign) in Web Content (Edge Animate)

I think I have tried every permutation to make this work, but I am probably missing something.
I am creating a single DPS iPad app with InDesign, and I am using a Typekit font throughout. So far so good.
I have created an Edge Animate project using the same Typekit font. In preview mode, it is fine as well.
However, when I place the Edge Animate project into a frame in InDesign and use the Web Content Folio Overlay (regardless of whether I use the .oam file or link directly .html output published by Animate), the Typekit font will not show up in the Edge Animate portion of the DPS app and will instead use a fallback font.
Can anyone suggest a way to make Typekit fonts in Edge Animate work when embedded in a DPS app? (For what it's worth, I have the same problem when embedding html output from Tumult Hype, so it seems unlikely that this is an issue with Edge Animate at all and probably has more to do with something in the way the DPS app is dealing with embedded html content.)
Thanks in advance for any assistance.

Believe me, I understand the pain. Unfortunately there's only so much we can do at Adobe as the EULAs provided by the foundries for their respective fonts are very explicit in where you can and can not use them.
For example, packaging an InDeisgn file and sending it off for pre-press with the fonts included in the package is in direct violation of most font EULAs. In a studio environment, you're only allowed to have a font installed on n number of computers and need to have multiple licenses to accomidate >n number of seats. When creating a PDF, fonts explicitly have to be subsetted before embedding into the PDF.
That's just to paint a picture of the fragile state of using fonts in print, usage in digital mediums is just another bee in your bonnet when it comes to considering when you can and cannot use a font.
Services like Typekit Desktop are trying to make this easier by removing a lot of those pain and condierations for you, by blanketing all these fonts under a single license you're free to use for print and the web. There's still some gotchyas, but we're aiming to greatly reduce how much you have to think about it where we can.
So yes there's a bit of education when it comes to mixing embedded HTML content/fonts with DPS, but at least there's options
Sarah

Why are TypeKit fonts not displaying correctly in Pages (iWork)?

Similar Messages

Maybe you are looking for