Why are wireless networks with unicode SSID names not showing?

I live in Taiwan and many wireless networks here use Chinese characters in their name and they don't appear in the menubar's list of networks I am able to connect to.
If I go to System Preferences > Network > Assist Me > Diagnostics > Airport it will show the previously unavailable networks, but instead of showing in (double-byte) Chinese, it seems to convert the names to their single-byte pairs. Trying to connect also times-out.
Obviously I can't just get the hotels, cafes and other providers to change their SSIDs into English, so is there a workaround that will allow me to see and connect to these networks?

Hi, I just got an iPhone and am having the same issue. Did you ever manage to resolve this?? Cheers

Similar Messages

Why are my purchases made on my iphone not showing in purchases on pc? ********.

Really sick of paying top dollar for services that don't work correctly.

What purchases are you asking about? If they are apps that were purchased on an iOS device they will not be available for anyother device and not show up. If tunes, is your PC authorized? Have you tried to sync the purchases to the PC?

Why are videos taken with a 4S suddenly not working properly when sent to non iphone users since the update?

Suddenly non I-Phone users cannot view videos anymore, they can hear the sound, but no audio. Iphone users are having issues viewing the videos too. This all started with the 6.0 update. Please fix it or tell me how to restore my phone back to the previous update, it is quite annoying.

Hello VintageShaay,
It sounds like you are getting some audio issues with the included Ear Buds when they are plugged in. I wanted to recommend these troublehsooting steps from the article named:
Troubleshooting iPhone, iPad, and iPod touch accessories
http://support.apple.com/kb/ts2634
3. Disconnect and Restart
Disconnect the accessory and turn it off, if possible. Restart iPhone, iPod touch, or iPad by turning it off and then back on. When the Home screen reappears, reconnect the accessory.
4. Isolate
Isolate the issue to the accessory, if possible. Or, if available, try to reproduce the issue with another identical or similar accessory.
Examples:
If there is static coming from the left audio channel when using headphones, try connecting the headphones to a stereo, or try connecting a different set of headphones to the device.
If the device is not syncing when connected to the dock, try connecting it directly to the computer using the Dock Connector to USB Cable, or try another USB port.
6. Restore iPhone, iPad, or iPod touch
Restore iPhone, iPad, or iPod touch to its factory default state. You should rarely need to use this step with an accessory issue. If the issue only affects a third-party accessory, contact the manufacturer before restoring the device.
Also if that does not resolve the issue, try the steps from the following article:
Apple EarPods: Low or muffled sound
http://support.apple.com/kb/TS4395
Thank you for using Apple Support Communities.
All the very best,
Sterling

Why are the TypeKit fonts I am syncing not showing up for use in Illustrator?

Hi there,
I am beyond frustrated right now. But that's neither here nor there for anyone reading this so I will get to the point.
I have synced the TypeKit font, Tablet Gothic Wide to my Mac, but it simply won't show up as a font choice in Illustrator. Any help here would be greatly appreciated.
Thanks
Sam

Hi Sam,
I'm sorry that you ran into trouble with this. I've confirmed that the font selections are added to your account correctly.
In case you weren't aware, the Creative Cloud application needs to be running on your computer in order for the fonts to be synced. If you don't have that installed, you can download it for free from https://creative.adobe.com/products
Once you have Creative Cloud running:
- Are the fonts showing up in the Fonts tab of Creative Cloud?
- If you haven't done so already, would you please try turning off font sync in the Creative Cloud application, wait a moment, and then turn it back on? The option to do this is under the gear icon in Preferences > Fonts ("sync on/off"). Sometimes the app just needs a fresh session for the fonts to appear again.
If that doesn't make a difference, please send your recent sync log files to Typekit Support at [email protected] so that we can look into it further.
Thank you,
-- liz
On OS X:
* Open the Finder
* under the Go menu, select "Go To Folder"
* in the window that opens, type: /Users/(username)/Library/Application Support/Adobe/CoreSync/
Remember to replace "(username)" with your own account name.
(Or if you are comfortable working from the Terminal, cd to $HOME/Library/Application Support/Adobe/CoreSync/)
Attach the 3 or 4 most recent CoreSync-yyyy-MM-dd.log files to an email. Please don't send a zip file, as they often get flagged as spam.

Why are the programs in my creative cloud not showing?

Hi I've been trying to download programs out of my creative cloud and they're not showing up, I uninstalled and re-installed it back on my computer and I'm still having the same problem. I also upgraded from the single plan to the full plan where I can download everything and I can't download the programs either.
Thanks

Sign in, activation, or connection errors | CS5.5 and later
Mylenium

Why are recently added and recently played playlists not showing on iphone 4s when they show in iTunes?

In my iTunes window, the playlists for my iphone 4s when it is connected show correctly. The playlists include 'top 25 most played songs', 'recently played', and 'recently added'. Although they appear in iTunes even after syncing, they do not show on my iPhone and I can not use them (they aren't there). But they continue to show in the iTunes list for the device. This is frustrating because I often like to play my recently added list or top 25. How do I fix this?
Thanks for any help.
James

I would also like to know this. =/

Creating a seamless wireless network with 2 AExpress units

I have 2 Airport Express units in different parts of my house. I have struggled for YEARS trying to get them to create one seamless wireless network with the same name that I could float between. I have never been able to get that to work. anyone?
I know that some of the problems MAY have to do with the non-apple router settings, but I just have never gotten a clear response form anyone about weather it is doable, and/or worth doing. I would settle for 2 seperate wireless networks that didn't compete with each other and/or constantly need re-booting to stay active. I am generally the most tech savvy person I know and am consulted on IT by friends and colleageus regularly, but I just cannot figure this one out..
I am totally capable of setting this up, both in the router and the AE units, if someone can just tell me that;
1) yes it is possible and it will work, and
2) just set it up like this...

Thanks for the clarification. Check your AirPort Express devices one at a time, but other than different device names to avoid confusion.....AirPort Express 1, AirPort Express 2....for example, the settings should look this:
Open AirPort Utility , select one AirPort Express, click Manual Setup
Click the Wireless tab below th row of icons
Wireless Mode = Create a wireless network
Wireless Network Name = Your choice
No check mark needed next to "Allow this network to be extended"
Radio Mode = 802.11n (802.11 b/g compatible) a good choice, but you can choose other combinations by holding down the option key on your Mac while you click on the selection box
Channel = Automatic
Wireless Security = WPA2 Personal an excellent choice if all of your devices are compatible with this setting
Wireless Password = Your wireless password
Confirm Password
Click the Internet icon
Connect Using = Ethernet
Connection Sharing = Off (Bridge Mode)
Update to save settings
Configure AirPort Express 2 exactly the same way and Update to save settings
Then, power down the entire network.....all devices....order is not important
Wait a moment, then start the modem/router first and let it run 2-3 minutes by itself
Start each AirPort Express the same way
Start each other network device one at a time about a minute apart
Check for proper network operation
IF....you did not have your AirPort Express devices in Bridge Mode before.....that is the reason why you are having issues now and also is the reason why the "roaming" network was not working.....assuming that there was a reasonable overlap in wireless coverage between the 2 Express devices, of course.
If you want to try the "roaming" setup again, assign the exact same wireless network name, security and password to both Express devices and confirm again that both are setup in Bridge Mode as the very last step before you click the Update button in AirPort Utility.
Power down the entire network and start up in sequence as well as in the example above.

Network diagnostics asks for password for wireless network with no security

hi
I am trying to connect my Mac Pro to a wireless network which has no security settings. Other Macs in the house connect to the network with no problem, but the Mac Pro doesn't. I am setting up a new network as I have moved house. In the previous house the wireless worked fine on the Mac Pro.
When I click on the Airport Icon in the menu bar, the search wheel shows and it finds the network, but when I click on the name of the network typically it doesn't connect. Occasionally it does connect, and I briefly have internet access, but then the number of bars on the Airport Icon gradually reduce and then I can't connect again.
When I run Network Diagnostics from Safari, it finds the network also, but then typically asks for a WEP password for the Wireless Network when I haven't added any security to the network (occasionally it doesn't ask for a password and I can connect briefly)
I have tried resetting my Time Capsule and creating a new wireless network with a different name, but still experience the same issues.
I wonder if someone has any ideas as to what might be going on, and how I might be able to troubleshoot this.
Thanks
Nick

It is one of mine. Yes. It connects to it no problem, just doesn't connect to the actual internet. Network diagnostics has all green lights until the ISP and/or Internet point. If I walk through diagnostics, it will get to the point where it says that the network requires a WEP password. I don't know why it does that because my network is not password-protected (husband claims it doesn't work well with his VPN system to get into work network). If I leave it blank, the connection will work. Eventually, after the computer is put to sleep, I will have the same problem upon waking up. I just tried renaming the network and removing all preferred networks and rebooting. Let's see how that works.

Extending an existing wireless network with an airport express

My wireless signal is quite weak in my room so I'm looking for a way to extend the range of the network by using an airport express. I understand i can't do this wirelessly but is it possible to run an ethernet cable from my existing router to the airport express in my room and then have a stronger signal in my room?
Thanks in advance!

Welcome to the discussion area, Aaron!
If you connect an ethernet cable from your existing router to the AirPort Express, and then configure the Express to "Create a wireless network" with the same name, security settings and password, this will in effect, extend your current wireless network.
The Express must be configured as a "bridge" to operate correctly on your network when you do this, meaning that the setting for Connection Sharing on the Express will be set to "Off (Bridge Mode).

Connect to one wireless network when multiple networks with the same name

Hi all,
I'm at a location where there are two networks with the name (e.g.) "wireless". One uses WEP and one uses WPA. The WEP network is weaker than the WPA network, so my Mac tries to connect to the WPA network, even though I have manually setup the wireless network with WEP security (after trying to connect it asks for a WPA password). Is there a way that I can connect to a wireless network by MAC Address, or some way for me to tell the Macbook to ignore the WPA network? The problem is that the SSID is the same, it seems.
Thanks,
Nate

The person (the landlord) isn't tech-savvy at all.
That is clearly obvious as
1. They would not be using WEP
2. They would setup a different SSID
WEP is not secure and can be cracked in minutes using tools readily available on the internet. If a hacker gain access to that network they could run other tools and hijack the dns and then you could be visiting sites on your mac that are completely bogus but look real.
Also it is common trick that hackers use is to setup an access point nearby with the sane SSID to capture details from users that join their network thinking they have joined their own network. Again the hacker can hijack the dns and monitor all your browsing and capture details.
The fact that someone has setup an SSID nearby with the same name would make me very suspicious.
I would treat your landlord's network as an untrusted network same as when your using a public wifi like coffebucks.

How can I expand my wireless network with a Time Capsule and Airport Express?

My entire house is wired for ethernet access (2 floors). I have a Time Capsule on the 2nd floor that reaches the entire house except for one room.
In this one room I have an ethernet port plugged into an Airport Express.
The problem I encounter is that I have two separate wifi networks with two separate names. I realize I can extend the wireless network on the 2nd floor to the 1st floor but I can only do this wirelessly to my knowledge, and the entire problem is that the signal doesn't reach the front room. Also, there is really no place in-between that the AE can be placed to extend the reach. The building is concrete and steel, I think that has a lot to do with the problem.
My question is: Can I have two wireless routers (connected to the same home network via ethernet) broadcast the same wifi network? I also have a SONOS system that further complicates things, I'm afraid. Would it help if I drew some sort of diagram?
Thanks!

Your network is not working as you describe.. or I have misunderstood the layout..
What is the broadband type? Modem is where? What is the main router?
From your screen shots the main router is the airport express that covers one room which seems wrong.
Why isn't the TC the main router? or both bridged.. if you go back and look at the apple document.. one or both apple routers are in bridge mode..
You are having issues with setup .. half of which is caused by v6 airport utility.
What OS are you running? Please install 5.6 utility.. do it.. do it now!!
Easy for Lion.
http://support.apple.com/kb/DL1482
Messy but possible for ML.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall 6.1 so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.

I am unable to join my existing wireless network with new AirPort Express

I am unable to join my existing wireless network with new AirPort Express.
I am using a DLink DI-524 Router, Windows 7 (64), and the AirPort Express.
AirPort Utility will not recognize the AEX wirelessly, it will only recognize it when it is connected by Ethernet. I can then configure the AEX and verify that the settings stick once disconnected and then reconnected. However, even after that, it will not recognize the AEX once disconnected from the Ethernet cable.
I followed the suggestions of several other threads on these forums. But I am unable to get the AEX to work.
Any suggestions? Thanks in advance.

Welcome to the discussion area!
It's almost always a security setting that causes problems when the Airport Express (AX) tries to join a third party wireless network. The AX usually does not "join" correctly and that's why you can't see it on your wireless network using AirPort Utility.
Using an ethernet cable is still the more reliable way to configure and adjust the AX, but if you are want to try to configure it using wireless, you must return the AX back to factory defaults as follows:
Power down the AX
Hold in the reset button +and keep holding it in+ as you plug the AX back in to power
Release the reset button after 10 seconds
When it is set to factory defaults, the AX broadcasts a wireless signal with a network name like "apple network xxxxxx" where the "x's" are either letters or numbers. You must look for this network by clicking on the fan shaped Airport icon at the top of the screen. If you don't see this network, then click Join Other Network to search that way. Unless you connect to this network, you will not be able to configure the AX using wireless.
Do you know the exact security type that your D-Link router is using? That is the key element in the process.
Open AirPort utility, click Manual Setup
Click the Base Station tab to establish a name for the AX, device password and adjust time zone settings
Click the Wireless tab
Wireless Mode....Join a wireless network
Wireless Network Name...must exactly match your D-Link wireless network name
Enable ethernet clients if you want the port to be active (your D-Link must be compatible with ProxySTA for this to work)
Wireless Security...exact setting of the D-Link network. WEP security causes a lot of issues. Try to use WPA/WPA2 Personal, which is far more secure.
Wireless Password...must match the D-Link network
Click the Music icon to enable AirTunes
Click Update to save settings
Any luck?

I have a mid-2010 iMac and just purchased a 2TB TC, can't join existing wireless network with AC standard so attached to iMac via ethernet with TC wifi turned off. How do i access TC now? not showing up in disk utility or on desktop. working fine with TM

I have a mid-2010 iMac and just purchased a 2TB TC, I just found out that it can't join existing wireless network with new AC standard so attached to iMac via ethernet with TC's wifi turned off. How do i access TC now? not showing up in disk utility or on desktop. It is working fine with TM. My cheeper seagate drives etc kept crashing, so i didnt trust cheeper back up options anymore. Connected those drives to TM via firewire and could see the drives and access them.
Also, I didn't want to bridge TC with my new fios router that I paid 100 dollars for, to get N speed and also paying 10 dollars more a month for fast speed. I heard that bridging slows down everything and then there can be port issues with mail etc. I connect to the internet via airport only and it is pretty fast. Getting over 50mbs downloads and over 30mbs uploads. Plus everything in my home it connected to my fios router, airport express for music streaming, two apple tvs, vuezone camer system. I really didn't want to monkey around too much with my system. But are there other options to connect the new TC. Can't find info anywhere for this and called apple who gave me the info above. after hanging up, i see that i cant access my TC and I am wondering if i would have to reset it to turn wifi on again to make changes to the drive, turn off blinking light or repair it in disk utility if it should become corrupted.
For other with similar issues i did solve some other problems: when i connected it to my ethernet port on my iMac wifi stopped working. Found that I had to turn off the ethernet in the system>network screen, but then TM didn't see the TC so i restarted after changes and then it saw it.
Now a rant. I can't believe in this wireless age that Apple would make a product that cant join a wireless net work. The apple rep said i could return it and look for the previous TC that would join an existing wireless network. Are we going backwards?
Thanks!
lennydas

Ok... it is getting a bit clearer but there are still some questions.
I connect to the internet via airport only and it is pretty fast.
I was assuming airport in this statement in your first post meant the TC or the Express.. but I now realise we are still in the mass confusion stage where apple calls everything wireless an airport. So what you mean is the airport internal card of the computer??
Also, I didn't want to bridge TC with my new fios router that I paid 100 dollars for, to get N speed and also paying 10 dollars more a month for fast speed. I heard that bridging slows down everything and then there can be port issues with mail etc.
I think this is mistaken.
Putting the TC in bridge mode plugged into your FIOS will not slow the network.. nor will it cause mail or port issues.. in bridge the TC is just a fancy WAP and switch plus the network hard drive.
If the computer is close it will be faster than the FIOS.
You can run both wireless networks with different names.. so it is clear which is which. But you can also setup roaming so the computers themselves pick which is the best wireless.
I tried extending the wireless net work and tried joining wireless network, but the TC kept crashing and I had to keep resetting the TC. the Apple support person said these, extend wireless network and joint wireless network, are no longer a connection option with the new TC because of the new AC protocol.
Thanks again!
You cannot extend to a non-apple wireless router.
You cannot use join a wireless network because when you do the ethernet ports will be cut off.
But that has not changed.. I don't think Apple support is correct.. there has been no change with the AC model.. it is simply a fact that apple routers do not work in join wireless mode other than as a dumb client. The same applies to AC as to the earlier version.. but I have asked another person to check this.
Join in the express is the only apple router that still allows an ethernet connection.
For now you best use of the TC is bridged to the FIOS. Wireless you can sort out between several options.

How to use Airport Extreme to create a second wireless network with different IP addresses behind an existing modem/router?

Hi,
I have an existing modem/router from my ISP that does DHCP and NAT with base IP 192.168.1.1 distributed in the wireless network. I use this wireless network for our private devices. I could turn off the DHCP server in this first router, but there isn't a separate setting to turn off NAT.
I want to connect my Airport Extreme (4th gen) to this existing router to create a separate wireless network for visiting guests, where IP addresses of 10.0.0.0 etc. are used. So I do not want to use the Airport Extreme in bridge mode, as I would like to keep the devices on the first network 'invisible' for those on the second network. (P.S. when connected in bridge mode, the Airport works well and can distribute a network with a different name from the first. It's just that I would feel more comfortable about our privacy if the Airport were to distribute a different IP range. False security, maybe?)
I've tried doing this by 'Sharing a public IP address' in Airport Utility's Internet tab, leaving TCP/IP's setting to 'via DHCP', setting DHCP addresses to start with 10.0.0.2 up to 200 with all else blank, and not using a standard host nor NAT-PMP in the NAT tab.
When I do this the Airport complains of a 'double NAT issue'. Internet connectivity seems to be OK, but when switching between the two networks on my Mac I get complaints about my IP address being in use by another device intermittently.
Can anyone help in how to get the 'double NAT issue' resolved?
Thanks!

So if someone is connected to the modem/router network they will be able to see the HD I will have put in to the AirPort Extreme?
As I said above.....since the modem/router and AirPort are bridged, devices on the modem/router wireless will be able to "see" devices on the AirPort wireless, and vice versa.....
If they can see the HD connected to the AirPort Extreme, will they be able to access it
Yes, unless you plan to password protect the drive connected to the AirPort Extreme.
or will they still need the password needed to get onto the AirPort Extreme network?
The modem/router and AirPort Extreme are bridged. They are on the same network. All devices are on the same network when the modem/router and AirPort are bridged. Not sure how else that I can say this.
Also, because it is bridged, I shouldn't have any problems accessing the HD I will have connected to the AirPort Extreme from an external location?
Accessing devices from a remote location is never easy....and a topic for a different post/discussion. If you have a "static" Internet IP address from your provider, and have all the details on how to forward ports on your modem/router, you are off to a good start.
Apparently there is some addressing issues because devices can be seen as "Double IP" because the modem/router would have allocated IP's as well as the AirPort allocating IP's thus making connections slower until resolved
When you "bridge", all IP addresses are issued by one device. There will be no conflicts on the network, since they are bridged.
Once again, in very simple terms, you have two doors (access points) that open into the same room (network). One "door" is the modem/router and the other "door" is the AirPort Extreme. They are on the same network....("room") because they are bridged.

How do I change SSID setting? Getting message "using network with default ssid'

Getting message "using network with default ssid'

First, let's address the biggest issue, the version of Firefox you are using is extremely old, out of date and insecure. Please update to Firefox 33 ASAP ([[Update Firefox to the latest version]])
After that, please give a bit more context on what exactly is going on. Keep in mind this is a Firefox support forum, we can't help you with Windows settings or setting up wireless networks.

Why are wireless networks with unicode SSID names not showing?

Similar Messages

Maybe you are looking for