Why BADI-- Z_implenation is in BLUE color, even though activated!

HI Experts,
I hv been created a Z_Implementation for BADI_MATERIAL_CHECK-->Method-CHECK_DATA-->ABAP Editor wriiten the code!
1 - Tried to activate, but got the error, saying that the Interface is not existing in Z_class--> By mistake, I have choosen ACTIVATE ANYWAY-> Checked syntax error-> No syntax error
2 - Later realised that, the Z_class has not been activated, so-->SE24->specified Z_class-->Activated
3- Came back SE19-->Again Activated ABAP code/Method/Z_implemetation
4 - When tried to keep braek point, said as Generic error!
But, issue, is, when I navigated, like,
SE18->Menu->Implementaion->Display->My Z_implementation is in NAVY BLUE in color, where as other SAP and Z implemenations r in normal yeloow!
Any clue?
thanq.

Similar Messages

Why SAP has provided the VOFM routines even though we do have User-Exits?

Hi Experts,
Pls. let me clarify about,
1) What is the difference between VOFM routines and User-Exits?
2) Why SAP has provided the VOFM routines, even though we are having User-Exits, BADIs?
3) Is VOFM is meant for only SD module or we also use VOFM in other modules too, like MM, PP?
thanq

Do be careful about asking questions that sound like interview questions...
> 1) What is the difference between VOFM routines and User-Exits?
VOFM are type of user exit.
>
> 2) Why SAP has provided the VOFM routines, even though we are having User-Exits, BADIs?
>
Historical. They were created before BADIs and CMOD user exits were invented. The other "old" user exits in SD are the user exit forms.
> 3) Is VOFM is meant for only SD module or we also use VOFM in other modules too, like MM, PP?
>
Only SD.
> thanq
You're welcome.

Why does my library show no content even though ATV2 can see my library?

Why does my library show no content even though ATV2 can see my library?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

In addition to my home page, every time I start Firefox a tab opens with notifacation of an updated addon. Why does this tab continue to appear even though there is no updated version of the addon?

In addition to my home page, every time I start Firefox a tab opens with notification of an updated addon. Why does this tab continue to appear even though there is no updated version of the addon?

See these articles for some suggestions:
*https://support.mozilla.com/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox
*https://support.mozilla.com/kb/How+to+set+the+home+page - Firefox supports multiple home pages separated by '|' symbols
*http://kb.mozillazine.org/Preferences_not_saved

I downloaded a series and only 4 episodes will show why can't I watch the others even though I purchased the entire series

I downloaded a series and only 4 episodes will show why can't I watch the others even though I purchased the entire series. It won't let me watch and every time is select the little cloud it tells me that it is downloading but nothing happens. I have tried to sync it on my PC but I could only get the first couple of episodes.

Hi Kousies!
It sounds like you may need to report this issue with your purchases:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/ht1933
You can also use this article to try to restart these stalled downloads:
iTunes: How to resume interrupted iTunes Store downloads
http://support.apple.com/kb/ht1725
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

Why is OS X Lion showing download even though I have the most current version?

Why is OS X Lion showing download even though I have the most current version?

Hi..
Nothing to be concerned about. The download is available if you want to download Lion again to create an install disc or re download Lion on any other authorized Macs you have for free using the same Apple ID.
How to create an OS X Lion installation disc | MacFixIt - CNET Reviews

I just started using my iphone 5s. I have a problem with new incoming emails from my POP account. Why are they marked as read automatically even though I have not even opened them yet.

I just started using my iphone 5s. I have a problem with new incoming emails from my POP account. Why are they marked as read automatically even though I have not even opened them yet.
At first I thought it might be because I was using simultaneously my old iPhone 4S so it somehow realized the emails where being pushed to another device and the it marked as read, this has nothing to do since I have deleted the email account from the iPhone 4S

Contact the email provider for assistance with their service.

Why can't I get Blue Colors to Print Correctly??? It prints violet/blue!!

I'm runing Windows 7 - 64 Bitwith Adobe CS5 Master Collection. But ever since I allowed CS5 Photoshop to control my new printer (HP Photosmart Prem C310) to do a test print of a graphic that I created all of my Blues print a violet/blue color, no matter what color blue I try to print. It has even affected MS Word & MS Project when I try to print known blue colored fonts or Gantt Chart Blues will no longer print blue. but it will print the same violet/blue color. I've even tried a brilliant stock windows blue which all view great, but prints the same shades of violet/blue! All my color paletes and blues view perfect. My monitor is calibrated and I've reset my new printer several times and still the same problem. I never had this problem before until I installed CS5 Suite.
A strange thing is that I can run the check printer test and the data and image that is stored in the printer willl print every color perfectly, including blues. Plus I've ran a full color copy directly from the scanner bed and the copy prints perfect as well. I almost feel as though Adobe CS5 has possessed my PC and Printer! So does anyone on here have the knowledge of getting this to print correctly like it did before installing CS5 Master Suite? Thanks to all who can take the time to respond back with solutions to my problem as I have been trying to correct it for nearly three weeks now! Could the problem be in Adobes hidden files possibly??? Thanks....

Dave,
there are at least two explanations, why Blue appears Violet on a print:
1. The printer isn't correctly calibrated or not calibrated at all.
2. A difficult explanation, please look here at p.60,61:
http://www.fho-emden.de/~hoffmann/cielab03022003.pdf
(the doc may have 2MBytes)
We are in the color space CIELab. A printer color space (gamut volume)
looks like a fruit in CIELab.
Pure (saturated) blue is mostly out-of-gamut for the printer space -
it cannot be printed with correct appearance.
A gamut compression is required. The blue has to be shifted towards
the middle axis L* of CIELab, in order to make it less saturated.
Correctly that should be done on a curved line (p.60, plane a*,b*),
but often it's done on a straight line towards the middle axis (dashed).
This straight line crosses areas which are not blue but slightly violet!
Remedies:
Use Softproofing for the appearance in the simulated prints.
If it is photo, for instance a blue sky, then shift the sky blue slightly
towards cyan.
If it is a spot color or a strong RGB blue, then use something else.
Related:
Handling sky blue
http://www.fho-emden.de/~hoffmann/skyblue14072008.pdf
Gamut mapping
http://www.fho-emden.de/~hoffmann/gamshow15052009.pdf
Some illustrations are understandable without mathematics
(p.18-21).
Hope this helps a little.
Best regards --Gernot Hoffmann
Message was edited by: Gernot Hoffmann

Why won't my iphone 3gs charge even though it is plugged in?

Hi guys, so I've had my 3gs for nearly 2 years. A couple of weeks ago I noticed that charging it wasn't going easy. When my iphone shuts down from no battery life and I plug it in to charge, it charges enough to turn itself back on, but when it eventually turns back on it won't charge anymore? Even though it is still plugged in and switched on by the plug. So I have to take out the USB, turn off the switch to the plug, turn the switch back on, plug the USB back in and it charges again.
BUT, recently not even that does it. I've tried different plug sockets, i've rebooted it. I've tried leaving the USB cable in and just turning on and off the plug switch.
So at the moment it's just going through a circle of running out of battery, charging and turning itself back on, having 4% battery and dying again and repeating.
So I googled my problem and didn't really find a solution. I mean the plug and USB cable are fine. Clearly it charges fine because it charges enough to turn itself back on when it's shut down.
I found out that when the iphone is plugged in but turned off it still charges so I tried this when it started itself up again, and it charges!!
But why won't it charge when the phone is on and plugged in??

Hi waplington123,
If your iPhone will not start up unless connected to power, you may want to troubleshoot using the steps in this article -
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Specifically -
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Thanks for using Apple Support Communities.
Best,
Brett L

Question why does 1 row(s) inserted display even though nothing was inserte

My question is when I run the below code in the sql workshop/sql command even though the insert statement is commented out. I still get the following message:
1 row(s) inserted.
Why? I check the table and I can seel that nothing was inserted. So why do I get the message 1 row(s) inserted.
I will be running this on an apex form. Should I worry about this?
Howard
declare
getFm411ID number;
distCount number;
begin
select count(*) into distCount from test where no = :P_NO and active = 'A';
if distCount > 0 then
-- insert into tbl_test(fm411_id,dist_id) values (getFm411ID,my411dist.dist_id);
dbms_output.put_line('test');
end if;
end;

It is a dummy message, and no need to worry about it.
begin
null;
-- insert into no_such_table (x) values ('a');
end;The above dummy code produces "1 row(s) inserted" message.
Ravi

What are the possible reasons why I cannot reactivate using my AppleID, even though I already change its password with the help of Apple personel

What are the possible reasons why I cannot reactivate my Iphone5 using my AppleID, even though I already change its password with the help Apple personel

If the password for your Apple ID works at id.apple.com > Manage Apple ID, then it's likely that the Apple ID the device wants you use is not the same as the Apple ID you are using.
Exactly what screen are you at on your iPhone? It sounds like it is in Activation Lock.

WiFi LED is still emitting amber/orange color even though it is connected to a network

Hi guys,
I'm having problems with my HP G4-1202AX's wifi LED..
The LED color is still amber/orange even though I am alread connected in a wifi network.
Any fix for this?

Hi
You have a couple of options as I see it please try these steps might help you to fix your issue.
1) Disconnect the Battery & Adapter then press & hold the power button on Notebook for 30 seconds then turn on the unit and check if the Wireless light turns on.
2) Go to Device manager then uninstall the wireless drivers from Network Adapter and restart the unit and check if the light turns on.
3) Please update the Bios & Wireless driver from HP website.
4) Click start in search type Recovery Manager then click on it select Yes on User access control then select I need immediate help then select Driver & application recovery select the wireless driver and install it then restart the unit.
5) If you are comfortable reseating the wireless card which will be on the back panel off your unit you could try this steps as well.
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Why Skype is pushing updates by force, even though I do not want them?

Why Skype is pushing to force updates are forced to, even though I denied receiving automatic updates taking? Apparently, I have to throw the whole Skype landfill without doing anything.

Are you sure about the more than one account? I'm running Windows XP Professional SP3. There is only ONE user account which I am using and I already checked "never check for updates". It just updated my Firefox automatically. I had to uninstall and download and re-install the older version again.
Is there a fix by editing the Registry to actually disable the automatic updates?

Why is my text in AE italic, even though I've selected regular?

I have a new composition in After Effects with a two layers; a video for the background and a new text layer. The text in the layer is slanted to the right (just like I had set it to italics), even though I've set it to regular. If I set it to italic, it slants even more. I can't figure out what is up with this. I have italic text in a different composition in the project, but I created this text layer from scratch; I didn't copy and paste it. Is it just a quirk?
Tell me that text isn't italicized. However, the font is Arial, and it is set to regular. I did try highlighting and changing it several times, created a new layer, and even different fonts, all with no success.

Like Todd, I suspect this is the issue:

Why won't Firefox block pop-ups even though configured to do so?

I have the browser set up to block pop-ups. It blocks the pop-ups from my bank even though I have repeatedly made that page "allowed" but allows subscription pop-ups on dozens of pages. Nearly all of these sub pop-ups force me to close them to see the page it hides. How can I actually block those annoying actions?

Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/viruses/disinfection/5350 Anti-Rootkit Utility - TDSSKiller]
* [http://general-changelog-team.fr/en/downloads/viewdownload/20-outils-de-xplode/2-adwcleaner AdwCleaner] (for more info, see this [http://www.bleepingcomputer.com/download/adwcleaner/ alternate AdwCleaner download page])
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

Why BADI-- Z_implenation is in BLUE color, even though activated!

Similar Messages

Maybe you are looking for