Why can I not save apn settings on iPad after ios7 upgrade?

After upgrading my iPad2 to ios7, I am unable to save apn settings.

I still have the problem with one service provider, to fix it I use SIM from another internet provider which sim is recognized by my ipad, then I set APN for the first provider and reinsert again the first sim, and works fine.
Ocassionaly I have to do this proccess again when it is misconfigured or after new ios upgrade.
I have IOS 7.04 version
Try another SIM from different carrier
Hope this can help you

Similar Messages

I have an iMac(mid2010) running Pages v5.5.1 on OS X 10.10. Why can I not save or share documents. The error message is You can't save the file "TEST.pages" because the volume is read only.

I have an iMac(mid2010) running Pages v5.5.1 on OS X 10.10. Why can I not save or share documents. The error message is You can’t save the file “TEST.pages” because the volume is read only.
I get the same message when using Numbers so I presume it is a OS problem

Some of your user files (not system files) have incorrect permissions or are locked. This procedure will unlock those files and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
Back up all data before proceeding.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Enter the following command in the Terminal window in the same way as before (triple-click, copy, and paste):
sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button
Select
 ▹ Restart
from the menu bar.

Why can i not delete some movies on ipad

why can i not delete some movies on ipad

If the movies show up with a Cloud symbol or if they will not delete when you hit the edit button (or the edit button is not there), go to Settings > Videos > Turn off 'Show All Videos'

Why can I not open raw images in bridge after down loading raw plug-in for my new Canon 70D?

Why can I not open raw images in bridge after down loading raw plug-in for my new Canon 70D dozens of times? I have never had any where near this amout of trouble with all my other Canon digital cameras.
<Removed by Moderator>

http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
Mylenium

Why can I not log into The app store after changing credit card information?

Why can I not log into the App store after changing credit card information?

DNS -
Some folks resolve download and other connection issues by using either OpenDNS or Google Public DNS services. The best use is to use it as the DNS configuration in your modem/router/gateway device, but often the configuration in the computer or iOS device will over ride the other configuration if you don't have access.
Open DNS;
http://www.opendns.com
208.67.222.222, 208.67.220.220
Google Public DNS;
https://developers.google.com/speed/public-dns/
8.8.8.8, 8.8.4.4

Why can't I use effects on camera even after I upgraded to 5.1?

Why can't I use effects on camera even after I upgraded to 5.1?

What effects are you referring to?

HT4839 Why in the world can i not change APN settings on a no-contract, unlocked iPhone?

i want to be able to change APN settings on my iPhone. !!!

thank you      jstrohl .
I'm not sure if this will be of help to anybody.
but I was able to bypass (or trick) AT&T restrictions on APN settings:
by inserting my old net10 T-mobile SIM card, which allows me access to
APN settings. While "inside" the APN settings i SWITCHED from t-mobile to AT&T
SIM card. the APN settings' window remained open and then I was able to change to my desired APN settings.
i want to mention that the only issue I had was sending PICTURE messages.
I had access to the web with Net10's downloaded APN settings:         iapnupdatetfdata.net10.com
from this website:               http://www.net10byop.com/program.php

Why can't I save pictures off the Internet after downloading ios 6?

Ever since I installed ios 6 I have not been able to save pictures off the Internet. When I 'Save photo', it does not save anywhere. Unless it now saves to a new spot I am unaware of? It's not in my 'Photos' section. Anyone have any ideas what this is about? Or if its going to be fixed?
Thanks!!!

I'm glad you answered so quick ;)
I think my problem is harder to solve than that. What you say is what I first tried to do. Since the sync with iTunes was still working, I could still have some pictures in the photos app, and each time I was syncing new pics from my computer ( PC btw ) I had a prompt that said sth like "xx elements have not be synced, check what on iTunes on the PC" but there was nothing on iTunes, and every pic I synced was here in the photos app. I thought there was a directory problem, or ghost pic files issues, so I made a backup of the iPad from iTunes and I disabled the autosync with iTunes. when I got it back, I directly tried to save a pic from safari and mail (even before syncing anything) and it was still not working.
I really can't figure out why is this occurring, and I haven't tried anything else for now. I think I will show this up in an apple store cause it's kinda hard to explain.
PS: sorry for the mistakes, I know this is annoying and makes my weird stuff hard to understand, but English is not my first language. (but I will keep on, the English community is still the best!)

Why can I not download previously bought music directly to iOS7

hello! Will keep it short, but in the Music App in iOS7 there is a tab where One could view "previous purchases". When i click it, it tels me I don't have any purchased movies to download....
Why can't it just check my previously downøoaded music as well? It would be great if apple starts tackling this problem. Right now, Ineed to have all thr music k want to listen tl on my computer and haveto shnc it up there. It seems so clumpsy in a time chere everythingis in the cloud, including my purchase receipts...

Downloading previously purchased music is not available in every country. Check iTunes in the cloud availabilty by country in this document http://support.apple.com/kb/HT5085

Why can I not play certain videos on ipad

Why can I play same videos on iPhone but not ipad

Here you go:
https://itunes.apple.com/us/app/euchre-3d/id364909474?mt=8

Why can I transfer my movies to my ipad after upgrading to iOS 7.

Hi have an ipad 2 which has always worked great, until I upgraded to iOS 7 and now I can't transfer my movies to the ipad from iTunes.
I have restored my ipad to factory settings and have tried copying movies and still no joy. To make the matter even more annoying I have tried to contact apple support and I need to pay a £25 charge as I am out of warranty for a problem that apple have caused.
Any ideas how to rectify this?
Thanks

That's a very helpful description of the problem and now. I wish I could be as helpful in return. Unfortunately, I know next to nothing about syncing home movies or personal videos. I have synced several of my own, but it always went without issue.
Some basic things that I can think of are ....
Where are the movies residing in iTunes on your computer? If they have been imported into the movies library then they should appear in the Videos app when you sync. If they were imported into the photos folder, they could be in the photos app, but I assume that you checked that already.
You did say this was a new problem so can I assume that the movies were appearing in the videos app?
I have read where some users reclassified videos in order to get them to sync. After using the Get Info command in iTunes, they would classify a video as a TV show for example in order to get to sync. Forgive my ignorance on this, but like I said, I have very limited experience with this and I am trying to recall exactly what the process was.
If nothing else, my comments will bump your post up again and hopefully somebody that knows what they are talking about will chime in.

Why can I not save a locked Numbers document?

My Numbers is weird, slow and almost impossible to get used to. That's why I now
I still use Appleworks Spreadsheets on my Powermac for doing daily accounting updates, and
only then import a copy to Numbers for keeping copies on my MacBookAir.
I created a template in Numbers, open it for every import, then copy the content of the import
to the template. The template is named Copy 0.
To do that I will import say "12Dec01", then need to open "Copy 0" and duplicate it (so I will not lose this template) then rename the duplicate to "12Dec01". I
then open the imported "12Dec01" and copy its content, then paste it into the renamed duplicate, then "lock" that document.
I now want to save it, but Numbers will not let me save an open document that has been locked.!!!
Why lock it if a locked document cannot be saved? Besides this issue of locking, I now have 4 open documents on the desktop: The import, Copy 0, the Duplicate of it, and the Renamed copy of it.
You know what? In Appleworks you would only have 1 document open which you "save as" with what ever name (in whatever condition of progress you want to save it), wherever to.
Accidentally, I found I can save a locked document but only after doing all these extra steps: In order to lock the document it has to be closed and saved unlocked to a folder first, then opened up again, and only then it can be locked!
This process reminds me of the old DOS systems, which questiioned everything you wanted to do with "do you really want to do that?"
I wonder whether my Numbers is damaged, or whether it has a good reason to be that way?
Or maybe I missed some instructions?

Thanks Jeff, I was not aware that a template could be multi-page. (All the existing templates were 1 page)
But it worked, saving me some steps. When I was finished I renamed the document, and locked it.
Then tried to save it but could not because it was locked. I closed it, went to my Spread Sheet Folder ,
to find it, it was not there. The Finder could not find it either.
So I start over again.
I opened up Numbers and it showed my personal Numbers template folder, it contained both my new
original 4 page template and the vanished saved document!
I tried to delete the template containing these document data and could not - I had to go to the Library/Application Support/Numbers to physically remove it from this folder. Then I started over again. I Finally found out how to make it work: I can now "save as", and then lock, and it will go to place where I want it to be saved and locked.
The secret is: Click on the document title in the menu bar, and it opens up "Save as...", which works the same as in OS 10.4.11, and you can pick the place you want for saving. Once done that, you can then lock the document in the same pull down menu, and then close it.
I also found later that I can delete a template from its folder, by letting Numbers open the templates,
clicking on the one I want to remove, then go to the "Numbers Menu/File/Move to...", select "Desktop"
and from there the selected template can then be thrown into the Trash from there.
It appears now that the real fault of the Numbers software is that the "Save as" command is not available in the "Edit" or "File" pull-down menus, but hidden behind the title of the document.

Why can I not save images?

starting today, I can no longer download images with the save image as option. Most of the time, save image as, is not an option in the list. Most of the time there is a really long menu when i right click on an image. Something is stopping me from downloading images. I believe the problem is with Firefox because, I can still download pictures in the IE browser. Any idea what may have changed and why? I need to download images for my work. I am in so much trouble right now because, I can't get my work done.

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

When creating a DVD face in Photoshop 13 my save options are limited to .PSE and .PDF. Why can I not save as a jpeg or other file format? This was never an issues in Elements 10 (my previous version).

I just recently purchased Elements 13. I am in the process of creating a DVD face for a video. The design is complete and I would like to be able to save it as a JPEG so I can use it in another program that prints my DVD's. The problem is that it only allows me to save the file as at PSE or a PDF. No other options are available. Why is this? I upgraded from Elements 10. In Elements 10 I have never had a problem saving this type of project as a JPEG. Any help would be greatly appreciated. Thanks!

ANSWER FOUND!
Once I finished composing my question I went back and spent some time to figure out the problem. Rather than choosing the "save as" option, which doesn't work, or attempting to choose "export" (grayed out), the correct option is to choose "export creation", which is near the very bottom of the initial drop down options. That works! I still think it would make sense to have it as an option in the "save as" area.

So, why can i not save a jpeg in cs6?

OI,
i just installed my new Photoshop cs6 (with the design standard package, student edition), and set about to make some graphics.
i selected a new file, 300ppi, and set to work.
after a while, i flatten the image and go to save
when i go to save drop down, i get a bunch of odd cool-sounding options, raw, and tiff.
seeing as i just made a normal no-frills graphic, i choose tiff.
when i re-open image, i get a really crappy version of the image, with some odd color bars to one side.
WHAT DID I DO?
RAW isn't any better, it just won't open!
so, any clue as to what i blew up?
i want to put it on the net, not just constantly re-work the jig in PSD!

Ah, thank you:
first: no, i have no other copies of Photoshop on the machine. if something pulled in an erroneous file or old plug in, it did so automatically. Windows has been updating like mad, but i doubt it messes with the Adobe files.
i am working in 32 bit and my laptop uses 32 bit. no problem there.
i took the image to a MAC at school, and saved as a Tiff. it worked fine.
ST, the document is in RGB.
more info:
my Windows 7, Asus laptop with i3 processor exeeds the other system requirements.
when i looked at my graphics card, it shows HD family. i got a first-time warning about unsupported graphics, so i set my preferences to not use a seperate graphics processor. i am sure the main processor on my machine can handle it.
any crazy ideas? if not, how might i seek serious help?
muchos gracias.

Why can I not save apn settings on iPad after ios7 upgrade?

Similar Messages

Maybe you are looking for