Why can't I import gps data from iPhone photos in aperture 3

I have an iPhone 4 (it's already an old model!) and why can't i still not import GPS-data from photo's on my iPhone 4 in Aperture...
Importing photos from the iphone just goes fine...

Richie:
But do you see the GPS of the iPhone data in Meta data section of the Inspector (set to a preset that shows GPS), as Frank Caggiano asked?
If the images do import the EXIF data, then you should be able to lift and stamp the GPS coordinates. I do that freuently.
Select on of your iPhone images and lift the sata
In the lift&stamp HUD deselect everything but the GPS coordinates, like this.
If no GPS-coordinates do appear in this setting, then your iPhone images do not have the EXIF info required, and you may need to check the iPhone settings.
If you see the EXIF data, then you just need to select the DSLR images that were taken at the same location and you can stamp the EXIF data to the DSLR images.
And after that you should be able to see their locations in the Places view.

Similar Messages

  • Why can I not import the videos from my iPhone 4 onto my desktop (Windows Vista)? When I plug in it imports the photos without a problem but it doesn't seem to import the videos.

    Why can I not import the videos from my iPhone 4 onto my desktop (Windows Vista)? When I plug in it imports the photos without a problem but it doesn't seem to import the videos.

    1.Download the Flash setup file from here: <br />
    [http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe Adobe Flash - Plugin version]. <br />
    Save it to your Desktop.<br />
    2. Close Firefox using File > Exit <br />
    then check the Task Manager > Processes tab to make sure '''firefox.exe''' is closed, <br />
    {XP: Ctrl+Alt+Del, Vista: Shift+Ctrl+ESC = Processes tab}
    3. Then run the Flash setup file from your Desktop.
    * On Vista and Windows 7 you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). <br />
    See this: <br />
    [http://vistasupport.mvps.org/run_as_administrator.htm]

  • Why can't I import raw images from camera to lightroom 5.7.1?

    why can't I import raw images from camera to lightroom 5.7.1?

    You can visit the Lightroom Journal to see the new features of LR6/CC, including new cameras supported in this release:
    Lightroom Journal | Tips and advice straight from the Lightroom team.
    And yes, as DJ confirmed, the Nikon D7200 is listed.
    The the full list of supported cameras is here (Lightroom and Camera Raw have compatible engines and identical support):
    Camera Raw plug-in | Supported cameras
    Mike

  • Why can't I delete a pic from iPhone album in ios8?

    Why can't I delete a pic from iPhone album in ios8?

    Now that you mention it, my parents don't need to see my playlists, either.  Hadn't thought of that.
    I accidently stumbled on an "ad-hoc" workaround that helped me.   The downside is that it only works with smart playlists so it may or may not work for you.  But here it is anyway:
    Smart playlists will not be uploaded to the cloud if they refeence another playlist on the cloud.  So I created a "catch-all" smart playlist and added a reference to that in all the smart playlists I don't want to share. 
    I also noticed that playlists with more than just music are not uploaded.  You could add a short video or something to the playlists that are only for the iMac.  This obviously won't work if your daughter needs them on her iDevice. 
    I know these aren't good solutions, but I hope they help someone. 
    Cheers,

  • Photoshop Elements 10 not importing GPS data from xmp file

    PSE 10 is not importing GPS information from the xmp file. Lightroom correctly records the
    GPS data but this info in not brought in when I add the photo to the PSE 10 catalog.  Has anyone experienced
    the same problem?

    The Google map module and geotagging have only just been added to LR4, released this week. There is no longer a map feature in Elements since Adobe dropped the earlier tie-up with Yahoo. Adobe reserves the right to change and amend partner services and this has disappointed many users of previous versions of PSE. It’s possible that the map could be re-introduced into future versions of PSE but don’t count on it and given the significant price cut on LR4, the decision could be strategic.
     

  • Why can't i transfer my apps from iPhone to iTunes,file transfer does not work

    ive tried everything to get my apps to sync to my itunes i dont kno what im missing ive tried file trnasfer so many times.up at the top of itunes where it shows all the apps downloading the bar under that wont load i dont kno if it has something to do with that or not.please help mem im getting the new iphone 4s at the end of the month and i want all my apps so i dont lose them.

    hudso407 wrote:
    why can't i transfer my song from itunes to my iphone?
    Dunno.
    What have you tried?

  • Trouble importing GPS data from HoudahGeo

    I can't get Lightroom to import geotagging data. This is my workflow: open Lightroom 2.5, drag files to HoudahGeo, run HoudahGeo and export geotagged  EXIF files to a location on my hardrive, go back to Lightroom and choose Read Metadata from File. Nothing shows up in Lightroom. Help!! Thanks

    Does HoudahGeo make a copy of the file with the Geocode information in the EXIF? You said "... export geotagged  EXIF files to a location on my hardrive".
    If so you need to Import those files to LR and the Geocode info should show up. Your question says to me you were re-reading the metadata from the original files that wasn't altered by HoudahGeo.
    Is there a reason you have to use HoudahGeo? I use Jeff Friedl's excellent powerful Geocoding plugin for LR in conjunction with Google Earth and it works great. But read the documentation carefully about the way Jeff has to maintain "Shadow GPS data" in the LR Catalog. See http://regex.info/blog/lightroom-goodies/gps
    You can also use the plugin with tracklogs from GPS devices.
    Apologies if I misunderstood your workflow.

  • Why can't I import video files from an external hard drive?

    I am using Adobe Premiere Elements 12 on Mac OSX 10.7.5 trying to import video files from a Lacie Rugged External Hard Drive using both firewire and usb, neither with any luck. The error message I receive is:
    "You're trying to import a file from a DVD or a Removable Media.  Please use Video Importer for importing Videos and Image Importer for importing images. "
    We can't import through the video importer either because the hard drive doesn't show up. We can, however, drag the videos to the desktop and do it that way but we'd like to avoid doing that if possible.
    Thanks
    By the way, the external hard drive is formatted FAT32 if that matters

    Tacomedia
    http://www.cnet.com/how-to/how-to-set-up-an-external-hard-drive-for-use-with-os-x/
    Please check out the above with regard to your external hard drive FAT32 and Mac computer question
    By the way, the external hard drive is formatted FAT32 if that matters
    SG has already commented on this in his initial reply to you. I thought that the above might blend in to supplement what he has said.
    I will watch for further developments in your troubleshooting with SG.
    ATR

  • Importing GPS data from Garmin Virb Clip into Premiere CS6

    I have been trying to add a clip that I recorded on my Garmin Virb Elite into a sequence on Premiere. I have tried adding the GPS overlay to the clip in Virb Edit (Garmin's video editing software), exporting it as an mp4 and then importing it into Premiere. Unfortunately whenever I include the clip into my timeline, the GPS overlay has disappeared (speedometer, altimeter etc.). Is there any way getting it to work in Premiere (CS6), because the Virb Edit is not a very good programme for editing on.
    Edit: I should add that when I watch back the exported clip in vlc, the GPS data shows on the video, but as soon as I put it in the time line in premiere, it disappears

    I have been trying to add a clip that I recorded on my Garmin Virb Elite into a sequence on Premiere. I have tried adding the GPS overlay to the clip in Virb Edit (Garmin's video editing software), exporting it as an mp4 and then importing it into Premiere. Unfortunately whenever I include the clip into my timeline, the GPS overlay has disappeared (speedometer, altimeter etc.). Is there any way getting it to work in Premiere (CS6), because the Virb Edit is not a very good programme for editing on.
    Edit: I should add that when I watch back the exported clip in vlc, the GPS data shows on the video, but as soon as I put it in the time line in premiere, it disappears

  • Video and GPS data from iPhone movie?

    Hi, I have following problem/ idea for a solution: I lost the canopy of by model airplane during a flight in a wheat field. Now I am looking for a solution to find it: what about a video camera and a GPS device, flying over the field, recording video and GPS data, play back video and (hopefully) find the canopy at frame xyz. Then read out the GPS position at this frame and go back in the field to the GPS coordinates and find what I lost.
    So the questions are:
    1. are the Video recordings stamped (?) with a continuous GPS position
    2. can this data be read out
    3. is there an app that can do this
    4. is this the correct forum for this question?
    Thanks for any ideas
    BTW: I already tried to order a new canopy, no luck...

    Let me get this straight... You lost the canopy for your model airplane... Now you want to strap your iPhone to another model airplane and fly it all over in the area where you lost the canopy.
    Piece of advice: Make sure you set up find my iPhone on it before you send it out on its mission. you may need it, in combination with its ability to emit an alarm when triggered remotely, to find the iPhone after it falls off the search plane.
    With luck, the fallen iPhone will land near the canopy you seek.
    To try and answer the questions:
    1. I believe the entire recording gets 1 location coded in the metadata. It is not a continuous stream of location data.
    2. Not relevant based on the answer to 1.
    3. I seriously doubt it, but I won't be shocked if someone has come up with something among the half million or so apps out there.
    4. I don't think there is a correct forum for this, but this works as well as any.

  • HT204085 How can we delete all the data from iphone keychain of all the apps?

    Is it possible to delete all the data from keychain? Cleaning keychain, which delete all the item stored in keychain of all the applications on iDevices. Programatically can we do it?

    Depends whether you have selected Lock when Full or Wrap when Full for the Buffer Mode. If you have selected Lock When Full, the capture will stop when the the buffer is full. You can then Save the Buffer and download it in the form of sniffer file and start you capture again. This will over write the old data. If you have selected Wrap when Full, then it will continue the capture when the buffer is full. The oldest packets are discarded as new packets arrive.

  • Why can't i import videos shot on iPhone 5s to PP 5.5?

    I can't seem to import videos shot with my friend's iphone 5 to Adobe Premiere Pro 5.5. However, out of all the videos shot (94 in total), i managed to import 4 of them.
    What premiere pro says.
    This is the details of one of the many videos that CAN'T be imported into Adobe Premiere Pro.
    The one that CAN be imported
    The only difference is the resolution.
    My Sequence Settings
    Please advice.

    >iphone 5
    Some people find that Iphone won't edit easily because it uses a variable frame rate
    - A possible fix in message #22 http://forums.adobe.com/thread/934466

  • Why Can't I Import Track 10 from my Music Library?

    I have 350 albums in my computer music library and I can't import any track 10 song from an album to iTunes. The message I get is: "The file 10 <Whatever Song Name>.wma cannot be imported because it does not appear to be a valid exported file." This happens on every track 10 title in my library and on one track 1 title that is 14 minutes long. Help!

    I am a PC user, but this may help you??:
    I am having the same problem with track 10 on two Springsteen CDs that would not play in my desktop PC (one was a dual dvd, the other a regular CD). So first, to get them to work, I had to find a source (my laptop) that would "see" the CD. Then I ripped to Windows Media, then copied onto an external hard drive, then imported into iTUnes.
    Everything went well until track 10 on both (After that, the rest of the tracks imported okay on one CD, and then on the other track 11 had a problem, but the rest ok).I found a posting (see below for the link) and it solved the problem on track 10 on both (basically I changed the track# to another number else in the Properties/ Summary/ Advanced section). However it didn't work for that one track 11. So if anyone has ideas on that, I'd appreciate it. I tried fiddling with all the differnt categories in Summary (track name, album name, etc) and rename the song itself, removing the number, but to no avail. Here is the posting that I found the solution on
    http://www.howardforums.com/archive/topic/1077261-1.html

  • Why can't I import audio content from a Pana LX5 MTS file?

    Hi,
    Awesome as the new video capability is in CS6 (the ability to add image filters is to die for!), I have encountered a problem.
    I can import the video component from a Panasonic LX5 .MTS AVCHD Lite video file. But the audio isn't included and I can't bring the audio content into an audio track by importing separately.
    When I import H264 .MOV, taken with my Canon 7D, audio is included in the video import and I can also import audio from another, similar file to an audio track.
    Is there some special trick involved with AVCHD Lite format video? Has anyone else succeeded in importing audio from an .MTS file?
    Kind regards,
    Joachim Smith
    Nykoping
    Sweden

    You aren't the only person: also fails for me, Windows 7 64-bit. Audio doesn't play in CS6 Bridge either, although audio plays in Windows Media, so I assume system has correct codec installed.
    I think this might be a bug, here is a .mts file for others (or Adobe) to test with: http://www.newae.com/00012.MTS

  • Why can't I restore the data from time machine?

    I have backup all my data on time machine, and i'm pretty sure while i checked the file of those backup, those older data should be stored properly. But while i enter time machine, trying to find the date i wanna restore but i can't. only left few latest dates to choose. Anyone encounter the same issue? Anyone can help?

    Section E in the first article.
    Time Machine Troubleshooting
    Time Machine Troubleshooting Problems

Maybe you are looking for

  • Error while deploying Java EAR including flex

    I am developing Flex + Java in RAD 6.0, codes run correctly. But when I want to deploy the ear file of the whole application. Error is raised while deploying the flex folder under WEB-INF. Following the detailed information: Anyone know how to solve

  • Using Bapi_salesorder_change adding a item, deleting a  item,Quanty change

    I need help on Bapi_salesorder_change. I have a table control in which there will be data of a particular sales document no, items, quantity, sales unit. When user changes the quantity, or adds a line item or deletes a line item and the press the sav

  • Popup window question

    Hi, I did a Portal application using JSF and RAD 6.0 in the Portal page I have two portlets side by side the portlet in the right side has a link to open a popup window when I click in that link and the popup window opens the portlet in the left side

  • Anyone else have the favorites bar showing up on iPhone?

    I Have looked all over to see if anybody else is having this same issue, but have found nothing. I have a very annoying issue where the favorites bar (also called the bookmarks bar) that is in Safari on the desktop or on the iPad in landscape mode, s

  • Unable to start oracle database

    Hi, [oracle@proddb5 ~]$ export NLS_LANG=american_america.utf8 [oracle@proddb5 ~]$ sqlplus "/as sysdba" SQL*Plus: Release 10.2.0.1.0 - Production on Mon Sep 22 13:59:56 2008 Copyright (c) 1982, 2005, Oracle. All rights reserved. ERROR: ORA-12705: Cann