Why can't read access log file in real-time? (Oracle Weblogic Server 10.3)

We can't read access log file in real-time. If access log is rotation to new file so can read access log file but can't read real-time.
*** Oracle Weblogic Server versions 10 R3

what's your meaning? try this command "tail -f access.log".
Threre is a buffer about 8K for WebLogic to write the access info into the log files, so you can't see the access info untill the buffer is full.

Similar Messages

Why can I not access internet files in mail. I get a "plug in failure" message.

Why can I not access internet files in mail. I get a "plug in failure" message.

ATTENTION MAC CUSTOMERS - Flash Player 13 "Plugin Failure" Workaround

Can i make use of same wallet for both Oracle Weblogic Server and OHS

We have configured an setup where Oracle HTTP Server 11g is configured as proxy server which will loadbalance the request to the cluster managed server.
We have created the wallet and configured SSL for Oracle Weblogic server. Now we want to configure SSL for OHS (Oracle HTTP Server ) .
Can we make use of same wallet.
For creating wallet i have used keytool utility and for certificate Microsoft CA.

10/04/15 11:47:00 Start process
/apps/weblogic/Oracle_11g/ohs/bin/apachectl startssl: execing httpd
Syntax error on line 70 of /apps/weblogic/Oracle_11g/instances/instance1/config/OHS/ohs1/ssl.conf:
Invalid command 'SSLCertificateFile', perhaps misspelled or defined by a module not included in the server configuration
When i am using separate wallet and that too using oracle wallet manager it is working fine .. But with keytool utility it is not working...
When used keytool it gave below error
[2010-04-13T11:17:22.4873+04:00] [OHS] [ERROR:32] [OHS-2052] [mod_ssl.c] [host_id: dxb01-sol-intellectapp] [host_addr: 10.240
.245.41] [pid: 22731] [tid: 1] [user: root] [VirtualHost: dxb01-sol-intellectapp:4443] server dxb01-sol-intellectapp:4443 ha
s an invalid wallet: file:/export/home/weblogic/ohsssl :: 28759
[2010-04-13T11:17:22.4874+04:00] [OHS] [ERROR:32] [OHS-2171] [mod_ssl.c] [host_id: dxb01-sol-intellectapp] [host_addr: 10.240
.245.41] [pid: 22731] [tid: 1] [user: root] [VirtualHost: dxb01-sol-intellectapp:4443] NZ Library Error: Failed to open the
wallet [Hint: incorrect path, incorrect password, bad wallet, ...]
As per hint , the path was correct , wallet was perferct , no where i was passing the password. So thought of passing password for keytool and used SSLWalletPassword key , but later found that it is depricated ...
That means we have to use oracle wallet manager where we can enable auto login ...
Please Advice if i am wrong..

Can no longer access log files from EM(ECM11.1.1.6.0).

Full UI popup error is " Stream closed ADF_FACES-60097:For more information, please see the server's error log for an entry beginning with: ADF_FACES-60096:Server Exception during PPR, #4"
Of course, I can't see any further errors in the logs,so I'm really at a disadvantage. am currently asking client if he sees anything in the Console for errors.
This was working just fine, no issues accessing logs from EM. No configiration changes were made, there's almost 8gb RAM available on this box(SOA on different BOX). ECM set up is Admin, IPM, UCM on this box.
Is there special memory settings for logs?

log from Admin Console is this:
<Dec 11, 2012 12:03:32 PM PST> <Error> <oracle.adfinternal.view.faces.config.rich.RegistrationConfigurator> <BEA-000000> <ADF_FACES-60096:Server Exception during PPR, #6
java.io.IOException: Stream closed
at java.io.BufferedInputStream.getInIfOpen(BufferedInputStream.java:134)
at java.io.BufferedInputStream.fill(BufferedInputStream.java:218)
at java.io.BufferedInputStream.read(BufferedInputStream.java:237)
at oracle.xml.parser.v2.XMLReader.pushXMLReader(XMLReader.java:416)
at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:315)
at oracle.jsp.parse.XMLUtil.getDocument(XMLUtil.java:447)
at oracle.jsp.parse.OracleJsp2Java.transformImpl(OracleJsp2Java.java:402)
at oracle.jsp.parse.OracleJsp2Java.transform(OracleJsp2Java.java:593)
at oracle.jsp.runtimev2.JspPageCompiler.attemptCompilePage(JspPageCompiler.java:691)
at oracle.jsp.runtimev2.JspPageCompiler.compileBothModes(JspPageCompiler.java:490)
at oracle.jsp.runtimev2.JspPageCompiler.parseAndGetTreeNode(JspPageCompiler.java:457)
at oracle.jsp.runtimev2.JspPageInfo.compileAndLoad(JspPageInfo.java:624)
at oracle.jsp.runtimev2.JspPageTable.compileAndServe(JspPageTable.java:645)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:387)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:810)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:734)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:821)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:180)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.sysman.eml.app.JSPFilter.doFilter(JSPFilter.java:93)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.sysman.core.model.targetauth.EMLangPrefFilter.doFilter(EMLangPrefFilter.java:158)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:527)
at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:253)
at com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:410)
at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:45)
at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:45)
at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:45)
at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:45)
at org.apache.myfaces.trinidadinternal.context.FacesContextFactoryImpl$OverrideDispatch.dispatch(FacesContextFactoryImpl.java:268)
at com.sun.faces.application.ViewHandlerImpl.executePageToBuildView(ViewHandlerImpl.java:471)
at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:140)
at javax.faces.application.ViewHandlerWrapper.renderView(ViewHandlerWrapper.java:191)
at org.apache.myfaces.trinidadinternal.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:193)
at oracle.sysman.emSDK.adfext.ctlr.EMViewHandlerImpl.renderView(EMViewHandlerImpl.java:158)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._renderResponse(LifecycleImpl.java:911)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:367)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:222)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:266)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.sysman.emSDK.license.LicenseFilter.doFilter(LicenseFilter.java:102)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:447)
at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:447)
Again, this is from me simply acessing any standard WLS log on the ECM Domain.
Lgin as weblogic, then Farm->logs>View Log Messages

Why can't I access any files on the other computers

I am currently having trouble retrieving files from other local computers within my area that have Airport cards installed on them (as well as this computer I am currently using, which has the base). While it shows that I have a good connection between the computers on the network, I am unable to access any files from said computers externally, only the local servers show up. Is there any way to remedy this?

Problems with buttons and links at the top of the page not working can be caused by an extension like the Yahoo! Toolbar or a Babylon extension that extents too much downwards and covers the top part of the browser window and thus makes links and buttons in that part of the screen not clickable.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode

Why can't I access the download folder in time machine?

When I access history in Time Machine the Download folder is grayed out and I can't access the files. Is there another location I can look to find those files that have been downloaded using Safari?

Firefox will not appear in the Market for most phones with incompatible hardware. I believe the Motorola Bravo is supported. You can check if your phone is supported here:
https://wiki.mozilla.org/Mobile/Platforms/Android
On some supported devices, a bug prevents Firefox from appearing in the Market. This may be related to the recent Market update. You can go to Settings/Applications and uninstall the Market update, then find and install Firefox.
Or, you can download the app directly from here:
http://ftp.mozilla.org/pub/mozilla.org/mobile/releases/4.0b3/android-r7/multi/
(Note: To download the app directly for an AT&T phone, you will have to search for instructions on how to "sideload" the APK file, since AT&T disables the option to install from non-Market sources.)

Can I generate a report file in 'real-time'?

Hello all,
My question concerns reports in Teststand. Currently, the report is not generated and no results are saved until the entire execution is complete. This is OK if there are no problems during the execution (which can take several days), such as the PC locking up, etc. If this happens, the all the results are lost!
This has happened twice now, so I was wondering if there's a way to set it up to record the results as the test is run, and generate the report file at the same time. Basically, so if a problem crops up, we can reboot the machine, or restart the testing, and all the results we had before the problem will be recorded.
I'm probably making this way more difficult than it needs to be!
Thanks in adva
nce,
Dave Neumann
[email protected]

Dave,
I am doing all our report generation in text mode, as I didn't want to use the html format for legacy reasons. Without looking at your implementation I cannot say why it's doing what it is... However, I know that I talked with NI Tech Support when I implemented this example over a year ago, so they should be able to help with getting the example to work with the default process model. You should be able to set some break points to see what's happening in the process model after each step to see why you're not seeing any results on the fly. I do remember that it required some copying and pasting from several sections in the process model. Once you get it running properly, stepping through it should give you a good idea of where you'd want to ad
d a routine that writes to a log file as the tests are conducted.

Using Scanner and FileReader to read from a file in real time

Hi
I would like to read continually from a text file (which is continually being appended to) and display each line as it appears in the textfile (in a text area).
What I would like to know is do I have to continually reopen the file (using FileReader) and buffer it into a Scanner everytime I want to read the changes made to it? There must be a better way.
Much appreciation for any help.

Umm .. I hope you're doing that in a separate worker
thread as otherwise you would block the EDT from
processing events like paint (thus never showing you
anything you append to the text area).Well that code fell under the run method of a class that is seperate to the main class, so it was called in a new thread. In desperation I've tried calling threads within threads (dangerous I know): remoteHandler's run method is called by a JButton's action listener...
private class remoteFHandler implements Runnable {
     int lineNum;
     int win, x, y, count, num = -999;
     remoteFHandler(){
          lineNum = 0;
     public synchronized void run() {
          while(showScreen == true){
               readingRF = true;
               innerHandler read = new innerHandler();
               Thread t = new Thread(read);
               t.start();
     //Wait 5 a seconds before checking if there is anymore text
             try {
                     textArea.append("Waiting to reopen \n"); //DEBUG
               t.join();
               wait(5000);
             } catch (InterruptedException e){
               System.out.println("File reading interrupted");
               return;
            }// while
          readingRF = false;
          return;
     } //run()
     private class innerHandler implements Runnable{
          innerHandler(){
          public synchronized void run(){
               try {
                    outFile = new File("/data/wrmwind_08/testText.txt");
                    if (outFile!=null) textArea.append("File last modified: " + outFile.lastModified() + "\n"); //DEBUG
                    fs = new Scanner(new BufferedReader(new FileReader(outFile)));
                    if (fs!=null) textArea.append("File opened stream \n"); //DEBUG
                    fs.useDelimiter("\\r");
                  } catch(IOException e){
                    System.out.println("Problems opening file. IO exception: " + e.toString());
                    return;
                  if (fs!=null){
                    readAndDisplay();
                    fs.close();
                    fs = null;
                    if (fs==null) textArea.append("File closed \n"); //DEBUG
               return;
     }//innerHandler
        private void readAndDisplay(){ //reads from a file and displays in a text field until there are no new lines then returns
     }//readAndDisplay()
}//remoteHandlerThe strange thing is that the when I modify the text file while the program is running, that time of last modification is detected and displayed in the text area yet I can't get to read the new line that's been added....

Why can't I open PDF files all the time?

OS X has rendered my protools software as useless. Now my computer also opens MS word & excel on start up. Sluggish to open microsoft office... This is better?

I'm using a macbook pro 2.4 GHz Intel corei5, 4 GB 10667 DDr3, OS 10.9. Before OS X, everything worked fine. Since I installed OS X, Microsoft applications are very sluggish. When I turn on my computer, sometimes it takes up to 5 minutes for MS word or excel documents to even show up in my menu when I open files with said documents in them. And sometimes when I start my computer, it automatically opens a blank excel doc AND an MS word blank doc. When I download PDF's from emails, it will open them only a few times, then it won't. I have to re-download the PDF just to open it, (mind you I usually move the document into the applicable file. Not that anyone can help with this issue, but ever since I downloaded OS X, my protools software doesn't work, and it won't recognize the library of sounds I purchased from reason adapted software. $1000's of wasted dollars. But just ask the people at mac, this OS is the best... Har!

Why can't I delete certain files from my Time Capsule?

I don't have my Time Capsule set up to back up every hour or so. It's set up so that I can manually drag & drop files into it. I've been trying to free up space by deleting some movie files that don't need anymore. They appear to be just .avi format but I haven't been paying close enough attention to see if any other formats won't delete. What prevents certain files from being deleted from the Time Capsule?

Dogs 'n Front wrote:
Under the DISK/File Sharing tab in Airport Utility, I have the File Sharing box checked.
What about the setting for "Secure Shared Disks"?
Dogs 'n Front wrote:
I didn't check EVERY single video and their info but a few I checked had the same permissions: "Everyone" and "Read & Write"
I only asked about each folder down the hierarchy to and including one video you can't delete.
If you copy a new file into each of the higher-level folders down to and including the "MOVIES" folder, can you then delete that new file?
If you're willing to use a command in a Terminal session, I can tell you how to determine what process has a file open.
I'll be offline for the next few hours, so I won't be able to reply as quickly as I've been for the last several exchanges.

I have an iTunes account where I have downloaded Digital movies & I am able to see the list on the desktop of the original downloads. When I log on another device with my login I do not see my list to access them. Why can't I access from another device

I have an iTunes account where I have downloaded Digital movies & I am able to see the list on the desktop of the original downloads. When I log on another device with my login I do not see my list to access them. Why can't I access from another device

Hey GingCarv,
Great question. You'll want to download the movies from your purchase history. The following article explains how to do so:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/HT2519
Note: At this time, movies are not available for automatic downloads.
Thanks,
Matt M.

I made a purchase on iTunes and it is not showing on any of my devices. When I tried to watch the show in my purchased file I could not. When I go back to iTunes it tells me I made the purchase already. Why can't I access my purchases. Case

I made a purchase on iTunes and it is not showing on any of my devices. When I tried to watch the show in my purchased file I could not. When I go back to iTunes it tells me I made the purchase already. Why can't I access my purchases. Case # 506294747

Hi Paul,
If you are having an issue such as this with an item such as a movie purchased from the iTunes store, you may want to report it to the store. Use the steps in this article -
Report an problem with an item you bought from the iTunes Store, App Store, Mac App Store, or iBooks Store
Thanks for using Apple Support Communities.
Best,
Brett L

How i can access log file in servlet?

How i can access log file in servlet then display it to browser.
          Can i have peice of codes...
          Thanks in advance.!


This is not something that can be answered easily. There is quite alot of code involved....
To get started I suggest you read up on the built-in package 'DBMS_LOB' from Oracle . Most of what you need you should find there.
regards Dave.

I got a new computer. Why can't I just log on to access my account?

I just got a new laptop. Why can't I just log on to my account and access my information, music, gift card balance ect.?

I take it you are referring to iTunes...
KLietz wrote:
I just got a new laptop.
From your OLD computer...
Copy your ENTIRE iTunes FOLDER to an External Drive... and then from the External Drive to your New Computer..
Full Details Here > http://support.apple.com/kb/HT1751
An Added Bonus is that you will have a Backup of iTunes.
KLietz wrote:
I just got a new laptop. Why can't I just log on to my account and access my information, music, gift card balance ect.?
Have you Aurthorised your New Computer..? See here...
http://www.apple.com/support/itunes/authorization/

I subscribed to Adobe PDF Pack, why can't I convert Pdf files to doc and/or jepg with my acrobat reader XI

I subscribed to Adobe PDF Pack, why can't I convert Pdf files to doc and/or jepg with my acrobat reader XI
I purchased the Pack three days ago, asked to sign in. when I try to sign in, I am led to a page to purchase the program.
What do I need to do to activate my subscribtion, so it will work with my reader XI?

Hi helmutb86458194,
Did you have an update for us? Your response came through blank...
Best,
Sara

Why can't read access log file in real-time? (Oracle Weblogic Server 10.3)

Similar Messages

Maybe you are looking for