Why cannot find data movement for clone database option on OEM 11gr2
Hi Expert,
I have Oracle 11gr2 11.2.3 normal OEM install to monitor our RAC database. When i go click data movement option, i can't find the clone database option. Any idea why ? Thanks
Hi;
Similar question mention in below links:
Clone Database: Select Destination in OEM 10g Database Control
Also see:
http://www.stanford.edu/dept/itss/docs/oracle/10g/em.101/b12016.pdf << part 6-6
Regard
Helios
Similar Messages
-
Concurrent Manager cannot find error description for CONC-System Node
Hi friends,
I m facing a problem while doing clustering for oracle EBS.i m using hpux11i with veritas cluster server for oracle DataBase cluster.i am doing 2 node cluster.i have installed oracle 11i apps with 9i DB.thru veritas i am able to do a db cluster failover.now i want to run oracle apps 11i too from both nodes(active/passive).so i configured a virtual IP address with a Virtual Hostname which will move along with the cluster failover.when i configure ora apps tier thru giving it virtual hostname concurrent manager dies with error--Concurrent Manager cannot find error description for CONC-System Node. i tried many things but unable to come up with a solution. pls help.
regs
SatishPlease post the contents of your hosts file here.
Is FND_NODES table populated correctly? Please run AutoConfig and make sure it completes successfully.
Why are the Concurrent Managers Failing with 'CONC-System Node Name not Registered" Error After Applying Patch 6461517? [ID 1108452.1]
OPP and SFM Managers do not Start [ID 1425409.1]
Thanks,
Hussein -
How to setup Data guard for SAP database?
Can someone please tell me how to setup data guard for SAP databases?
Thanks,
AbhiHi Abhi,
have a look at OSS 105047 - Support for Oracle functions in the SAP environment you find this under
14
Oracle Data Guard
You can use "Physical Standby".
You cannot use "Logical Standby".
You are allowed to use Fast Start Failover (FSFO) but SAP Support is not provided.
You can use Data Guard Broker.
You can use Maximum Performance Mode, Maximum Availability Mode and Maximum Protection Mode.
In the case of Maximum Availability and Maximum Protection, you must pay particular attention to a fast network connection in order to avoid performance problems.
Maximum Protection causes the primary database to terminate if problems occur in the standby database.
And here you find on Oracle white paper from 2010 http://www.oracle.com/us/solutions/sap/wp-ora4sap-dataguard11g-303811.pdf
Perhaps some SAP user have answers for you http://scn.sap.com/community/oracle/content?query=guard
regards
Kay -
Cannot find PDL type for output device LOCL in J1INCRT
Dear all
I am getting error in PRD system. When I am running J1INCRT (Customizing for Certificate Printing) the error
cannot find PDL type for output device LOCL
we are using ECC6 ,oracle 10g and windows 2003
Kernel release 701
Please suggest how to solve
Regards,
KumarHello
It looks like that you had not installed the ADS(Adobe Document server) for the PDF type reports. Please check with your basis team if you want to configure ADS.
If you need the output as a sapscript then please do the sollowing steps:
(1) Execute transaction SM30
(2) Enter 'Table/View' as V_T5F99OCFT
(3) Select 'Maintain' option.
(4) Select 'New Entries' option from the Application Too
(5) Enter following entries:
Logical Form Name = HR_IN_EPF12A_99M
Form Variant = (Leave this field blank)
End Date = 31.12.9999
Start Date = 01.01.1990
Form Type = SAP Script (SSC)
Def. Type = (This field should be checke
PDF Form Name = HR_IN_EPF12A_99M
SAP Script Form Name = HR_IN_EPF12A_99M
Smart Form Name = (Leave this field blank)
(6) Save the entries
The above example I have given you is only for the form 12A.
You have to make entries for all the reports sapscript in this table.
Please goto SE71 -> F4 -> Payroll -> Payroll India here you will find
all the sapscripts you require.
Regards
Ramana -
i cannot find a movie i rented...i only see a "music" "movie" "tv show" categories. where is rental that i downloaded?
Hi gnoble,
When you go under the Movie option in your Library, you will see separate tabs for "Rented", "Unwatched", "Movies", 'Genres", "Home Videos", and "List".
Click on the "Rented" one to see the Rentals that you have waiting to be watched.
Cheers,
GB -
I cannot find my receipt for my ipod how can i prove it isnt a year old
I cannot find my receipt for my ipod and its under a year old how can i prove this
Hi cantfindanything,
I am gathering you are trying to get an iPod repaired by Apple.
In the US for iPod Touch Generation 5:
Every iPod comes with a one-year limited warranty and 90 days of complimentary telephone technical support.
If you are trying to get a replacement or repair job, Apple will just need your Serial Number, found on either the back of your iPod Touch or in: Settings, General, About, Serial Number.
When Apple receives this number, their database will be able to show up your information including device purchase and activation.
To get a repair job/replacement, it is best to talk to Apple on the phone or go to your nearest Apple store to find out possible resolutions.
To contact Apple call:
1-800-MY-APPLE
You can also take the iPod into your closest Apple Store and give them your serial number and they will be able to help you: http://www.apple.com/retail/storelist/
Many Thanks for your question and Happy New Year!
iBenjamin Crowley -
Satellite L500-1XD - cannot find an update for PC health monitor
This TBS advises updates to PC health monitor and HDD/SDD alert.
HDD/SDD alert has a published update in the relevant downloads section but I cannot find an update for PC health monitor.
Any one got any bright ideas ?
Otherwise this seems quite a balanced system.Hi Paolo30,
Thanks for your contribution. I agree with your model designation
I would like to download ver 1.5.6.0 but it does not seem to be listed on the download list (Two and a quarter pages long) for the L500-1XD on the Toshiba-Europe website. I am using I.E.8
Where are you seeing this listed ? Could you give me a URL please ?
It is an important update as it resolves a conflict between video streaming from HD and SMART HD messages as described in the TSB.
The only upgrade that is tagged as 1.5.6.0 is the Bullitin Board and this does not sound like the correct type of application. There was obviously a major update on 21/6/2010 there are 30 odd updates with that date.
Kindest Regards -
Cannot find PDL type for output device '(Printer name)'
Hi,
After seeing the statutory reports (PF, ESI etc) in standard format, we try to print form. We get the below error:
Cannot find PDL type for output device '(Printer name)'
Message no. FPRUNX113
Diagnosis
No PDL type has been found for the specified output device.
System Response
Error message
Procedure
Contact your system administrator.
Procedure for System Administration
For more information, see SAP Note 685571.
Any input will be off great help...
Regards
PoojaHello
It looks like that you had not installed the ADS(Adobe Document server) for the PDF type reports. Please check with your basis team if you want to configure ADS.
If you need the output as a sapscript then please do the sollowing steps:
(1) Execute transaction SM30
(2) Enter 'Table/View' as V_T5F99OCFT
(3) Select 'Maintain' option.
(4) Select 'New Entries' option from the Application Too
(5) Enter following entries:
Logical Form Name = HR_IN_EPF12A_99M
Form Variant = (Leave this field blank)
End Date = 31.12.9999
Start Date = 01.01.1990
Form Type = SAP Script (SSC)
Def. Type = (This field should be checke
PDF Form Name = HR_IN_EPF12A_99M
SAP Script Form Name = HR_IN_EPF12A_99M
Smart Form Name = (Leave this field blank)
(6) Save the entries
The above example I have given you is only for the form 12A.
You have to make entries for all the reports sapscript in this table.
Please goto SE71 -> F4 -> Payroll -> Payroll India here you will find
all the sapscripts you require.
Regards
Ramana -
Q30: Cannot find sales order for a committed stock item
I have a few item numbers which show committed stock in item master data/stock but I cannot find an open sales order or even with an open line on a closed sales order. I have tried various query reports without success.
Does anyone have a key to unlock this problem?
Thanks,
RobinHi,
Sorry but I am pretty new to SAP and on a learning curve so no idea what note 999124 is or even where/how I would use it.
Can you explain further please?
Robin
Lakshmipathi
Posts: 17,513
Registered: 8/9/07
Forum Points: 34,462
Solved problem (10)
Very helpful answer (6)
Helpful answer (2)
Re: Q30: Cannot find sales order for a committed stock item
Posted: Jan 12, 2011 3:18 PM in response to: Robin Bellion Reply
Check Note 999124 - Incorrect committed\On order quantity when changing orders
thanks
G. Lakshmipathi -
Cannot find CFML template for custom tag
Why am I getting this error when my code looks like this?
Cannot find CFML template for custom tag UPSPrice.
ColdFusion attempted looking in the tree of installed custom tags but did not find a custom tag with this name. If you are using per-applica
<Cfif NOT form.shipzip IS "">
<CF_UPSPrice SERVICE="#form.upsshiptype#" FROM="#shopshipzip#" TO="#FORM.shipzip#" WEIGHT="#getshipweight.totwei#">
<cfelse>
<CF_UPSPrice SERVICE="#form.upsshiptype#" FROM="#shopshipzip#" TO="#FORM.zip#" WEIGHT="#getshipweight.totwei#">
</cfif>UPSPrice.cfm file:
<!---
NAME:
CF_UPSPrice
DESCRIPTION:
Cold Fusion custom tag obtain UPS shipping costs from ups.com.
ATTRIBUTES:
CALLTAG - (optional) Electronic or basic call tag issued, valid options
are NONE BASIC or ELECTRONIC, defaults to NONE.
COD - (optional) Package is being sent C.O.D., valid options are YES
and NO, defaults to NO.
FROM - (required) Source (ship from) postal code.
HANDLING - (optional) Requires special handling (eg. - any article that
is not fully encased in an outside shipping container,
or any package that exceeds 60 inches in length).
HAZARD - (optional) Package contains hazardous material, valid options are YES
and NO, defaults to NO.
HEIGHT - (optional) Height (in inches) of oversized package.
LENGTH - (optional) Length (in inches) of oversized package.
OVERSIZED - (optional) Package is oversized, valid options are YES and NO,
defaults to NO.
RESPONSE - (optional) Delivery confirmation service, valid options are
NONE BASIC SIGNATURE ALTERNATE or ALL, defaults to
NONE.
SATDELIV - (optional) Saturday delivery, valid options are YES and NO,
defaults to NO.
SATPICKUP - (optional) Saturday pickup, valid options are YES and NO,
defaults to NO.
SERVICE - (required) UPS Service ID, valid service IDs are:
1DM - Next Day Air Early AM
1DML - Next Day Air Early AM Letter
1DA - Next Day Air
1DAL - Next Day Air Letter
1DP - Next Day Air Saver
1DPL - Next Day Air Saver Letter
2DM - 2nd Day Air A.M.
2DA - 2nd Day Air
2DML - 2nd Day Air A.M. Letter
2DAL - 2nd Day Air Letter
3DS - 3 Day Select
GNDCOM - Ground Commercial
GNDRES - Ground Residential
SHIPNOT1 - (optional) First ship notification, valid options are NONE
DOMESTIC or INTERNATIONAL, defaults to NONE.
SHIPNOT2 - (optional) Second ship notification, valid options are NONE
DOMESTIC or INTERNATIONAL, defaults to NONE.
TOCOUNTRY - (optional) Destination country code, defaults to US if not
specified. Visit the UPS site for a complete list of
valid two letter country codes.
TO - (required) Destination (ship to) postal code.
VALUE - (optional) Declared value for carrier liability, carrier assumes
$100 by default.
VERBCONF - (optional) Verbal confirmation of delivery, valid options are YES
and NO, defaults to NO.
WEIGHT - (required) Weight (in pounds) of package, fractions may be used.
WIDTH - (optional) Width (in inches) of oversized package.
NOTES:
This tag submits a shipping cost request to UPS for processing, and returns
price and shipping information. CF_UPSPrice sets the following variables that
you may use within your template after the call to CF_UPSPrice:
UPS_BaseCharge - Base shipping charge.
UPS_Charge - Total charge.
UPS_Error - Error message, if there was one.
UPS_ErrorCode - Error code, if there was one.
UPS_FromCountry - Source country code.
UPS_FromPostal - Source postal code.
UPS_GuaranteedBy - Guranteed delivery time.
UPS_OptionalCharge - Total of optional charges.
UPS_Service - UPS service ID.
UPS_Success - YES if request was successful, NO if not.
UPS_ToCountry - Destination country code.
UPS_ToPostal - Destination postal code.
UPS_ToZone - Destination zone.
UPS_Weight - Billed weight.
USAGE:
To use just call <CF_UPSPrice> from within your Cold Fusion template,
passing at least the required attributes TO FROM SERVICE and WEIGHT.
EXAMPLES:
Obtain price for next day package from NY to CA:
<CF_UPSPrice SERVICE="1DA" FROM="11213" TO="90046" WEIGHT="1.5">
<CFOUTPUT>Cost is #DollarFormat(UPS_Charge)#</CFOUTPUT>
Sending a oversized package C.O.D. via second day air:
<CF_UPSPrice SERVICE="2DA" FROM="11213" TO="90046"
WEIGHT="1.5" HEIGHT="13" WIDTH="12" LENGTH="20" COD="Yes">
Using form fields:
<CF_UPSPrice SERVICE="#service#" FROM="#from#" TO="#to#" WEIGHT="#weight#">
AUTHOR:
Ben Forta ([email protected]) 10/14/97
With help from Dave Beckstrom ([email protected])
--->
<!--- Initialize variables --->
<CFSET proceed = "Yes">
<CFSET error_message = "">
<!--- Get UPS service --->
<CFIF proceed>
<CFIF IsDefined("ATTRIBUTES.service")>
<CFSET product = ATTRIBUTES.service>
<CFELSE>
<CFSET proceed = "No">
<CFSET error_message = "SERVICE must be specified!">
</CFIF>
</CFIF>
<!--- Get destination postal code --->
<CFIF proceed>
<CFIF IsDefined("ATTRIBUTES.to")>
<CFSET destPostal = ATTRIBUTES.to>
<CFELSE>
<CFSET proceed = "No">
<CFSET error_message = "TO postal code must be specified!">
</CFIF>
</CFIF>
<!--- Get source postal code --->
<CFIF proceed>
<CFIF IsDefined("ATTRIBUTES.from")>
<CFSET origPostal = ATTRIBUTES.from>
<CFELSE>
<CFSET proceed = "No">
<CFSET error_message = "FROM postal code must be specified!">
</CFIF>
</CFIF>
<!--- Get weight --->
<CFIF proceed>
<CFIF IsDefined("ATTRIBUTES.weight")>
<CFSET weight = ATTRIBUTES.weight>
<CFELSE>
<CFSET proceed = "No">
<CFSET error_message = "WEIGHT postal code must be specified!">
</CFIF>
</CFIF>
<!--- If all okay, process other options --->
<CFIF proceed>
<!--- Get destination country --->
<CFSET destCountry = "US">
<CFIF IsDefined("ATTRIBUTES.tocountry")>
<CFSET destCountry = ATTRIBUTES.tocountry>
</CFIF>
<!--- Get oversized --->
<CFSET oversized = "0">
<CFIF IsDefined("ATTRIBUTES.oversized")>
<CFIF ATTRIBUTES.oversized>
<CFSET oversized = "1">
</CFIF>
</CFIF>
<!--- Get COD --->
<CFSET cod = "0">
<CFIF IsDefined("ATTRIBUTES.cod")>
<CFIF ATTRIBUTES.cod>
<CFSET cod = "1">
</CFIF>
</CFIF>
<!--- Get hazard --->
<CFSET hazard = "0">
<CFIF IsDefined("ATTRIBUTES.hazard")>
<CFIF ATTRIBUTES.hazard>
<CFSET hazard = "1">
</CFIF>
</CFIF>
<!--- Get handling --->
<CFSET handling = "0">
<CFIF IsDefined("ATTRIBUTES.handling")>
<CFIF ATTRIBUTES.handling>
<CFSET handling = "1">
</CFIF>
</CFIF>
<!--- Get calltag --->
<CFSET calltag = "0">
<CFIF IsDefined("ATTRIBUTES.calltag")>
<CFIF ATTRIBUTES.calltag IS "BASIC">
<CFSET calltag = "1">
<CFELSEIF ATTRIBUTES.calltag IS "ELECTRONIC">
<CFSET calltag = "2">
</CFIF>
</CFIF>
<!--- Get Saturday delivery --->
<CFSET saturdaydelivery = "0">
<CFIF IsDefined("ATTRIBUTES.satdeliv")>
<CFIF ATTRIBUTES.satdeliv>
<CFSET saturdaydelivery = "1">
</CFIF>
</CFIF>
<!--- Get Saturday pickup --->
<CFSET saturdaypickup = "0">
<CFIF IsDefined("ATTRIBUTES.satpickup")>
<CFIF ATTRIBUTES.satpickup>
<CFSET saturdaypickup = "1">
</CFIF>
</CFIF>
<!--- Get response --->
<CFSET response = "0">
<CFIF IsDefined("ATTRIBUTES.response")>
<CFIF ATTRIBUTES.response IS "BASIC">
<CFSET response = "1">
<CFELSEIF ATTRIBUTES.response IS "SIGNATURE">
<CFSET response = "2">
<CFELSEIF ATTRIBUTES.response IS "ALTERNATE">
<CFSET response = "3">
<CFELSEIF ATTRIBUTES.response IS "ALL">
<CFSET response = "4">
</CFIF>
</CFIF>
<!--- Get vcd --->
<CFSET vcd = "0">
<CFIF IsDefined("ATTRIBUTES.verbconf")>
<CFIF ATTRIBUTES.verbconf>
<CFSET vcd = "1">
</CFIF>
</CFIF>
<!--- Get first ship notify --->
<CFSET firstshipnotify = "0">
<CFIF IsDefined("ATTRIBUTES.shipnot1")>
<CFIF ATTRIBUTES.shipnot1 IS "DOMESTIC">
<CFSET firstshipnotify = "1">
<CFELSEIF ATTRIBUTES.shipnot1 IS "INTERNATIONAL">
<CFSET firstshipnotify = "2">
</CFIF>
</CFIF>
<!--- Get second ship notify --->
<CFSET secondshipnotify = "0">
<CFIF IsDefined("ATTRIBUTES.shipnot2")>
<CFIF ATTRIBUTES.shipnot2 IS "DOMESTIC">
<CFSET secondshipnotify = "1">
<CFELSEIF ATTRIBUTES.shipnot2 IS "INTERNATIONAL">
<CFSET secondshipnotify = "2">
</CFIF>
</CFIF>
</CFIF> <!--- End process params --->
<!--- If have all params, process request --->
<CFIF proceed>
<CFHTTP
URL="http://www.ups.com/using/services/rave/qcostcgi.cgi"
METHOD="POST"
>
<CFHTTPPARAM TYPE="FORMFIELD" NAME="accept_UPS_license_agreement" VALUE="yes">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="10_action" VALUE="3">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="13_product" VALUE="#product#">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="15_origPostal" VALUE="#origPostal#">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="19_destPostal" VALUE="#destPostal#">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="22_destCountry" VALUE="#destCountry#">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="23_weight" VALUE="#weight#">
<CFIF IsDefined("ATTRIBUTES.value")><CFHTTPPARAM TYPE="FORMFIELD" NAME="24_value" VALUE="#ATTRIBUTES.value#"></CFIF>
<CFIF IsDefined("ATTRIBUTES.length")><CFHTTPPARAM TYPE="FORMFIELD" NAME="25_length" VALUE="#ATTRIBUTES.length#"></CFIF>
<CFIF IsDefined("ATTRIBUTES.width")><CFHTTPPARAM TYPE="FORMFIELD" NAME="26_width" VALUE="#ATTRIBUTES.width#"></CFIF>
<CFIF IsDefined("ATTRIBUTES.height")><CFHTTPPARAM TYPE="FORMFIELD" NAME="27_height" VALUE="#ATTRIBUTES.height#"></CFIF>
<CFHTTPPARAM TYPE="FORMFIELD" NAME="29_oversized" VALUE="#oversized#">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="30_cod" VALUE="#cod#">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="33_hazard" VALUE="#hazard#">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="34_handling" VALUE="#handling#">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="35_calltag" VALUE="#calltag#">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="37_saturdaydelivery" VALUE="#saturdaydelivery#">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="38_saturdaypickup" VALUE="#saturdaypickup#">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="39_response" VALUE="#response#">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="43_vcd" VALUE="#vcd#">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="44_firstshipnotify" VALUE="#firstshipnotify#">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="45_secondshipnotify" VALUE="#firstshipnotify#">
</CFHTTP>
<!--- Check if succeeded --->
<CFIF ListFirst(CFHTTP.FileContent, "%") IS "UPSOnLine3">
<!--- Success, set variables --->
<CFSET CALLER.UPS_Success = "Yes">
<CFSET CALLER.UPS_Service = ListGetAt(CFHTTP.FileContent, 2, "%")>
<CFSET CALLER.UPS_FromPostal = ListGetAt(CFHTTP.FileContent, 3, "%")>
<CFSET CALLER.UPS_FromCountry = ListGetAt(CFHTTP.FileContent, 4, "%")>
<CFSET CALLER.UPS_ToPostal = ListGetAt(CFHTTP.FileContent, 5, "%")>
<CFSET CALLER.UPS_ToCountry = ListGetAt(CFHTTP.FileContent, 6, "%")>
<CFSET CALLER.UPS_ToZone = ListGetAt(CFHTTP.FileContent, 7, "%")>
<CFSET CALLER.UPS_Weight = ListGetAt(CFHTTP.FileContent, 8, "%")>
<CFSET CALLER.UPS_BaseCharge = ListGetAt(CFHTTP.FileContent, 9, "%")>
<CFSET CALLER.UPS_OptionalCharge = ListGetAt(CFHTTP.FileContent, 10, "%")>
<CFSET CALLER.UPS_Charge = ListGetAt(CFHTTP.FileContent, 11, "%")>
<CFSET CALLER.UPS_GuaranteedBy = ListGetAt(CFHTTP.FileContent, 12, "%")>
<CFSET CALLER.UPS_Error = "">
<CFSET CALLER.UPS_ErrorCode = "">
<CFELSE>
<!--- Failed, set variables and error message --->
<CFSET CALLER.UPS_Success = "No">
<CFSET CALLER.UPS_Service = "">
<CFSET CALLER.UPS_FromPostal = "">
<CFSET CALLER.UPS_FromCountry = "">
<CFSET CALLER.UPS_ToPostal = "">
<CFSET CALLER.UPS_ToCountry = "">
<CFSET CALLER.UPS_ToZone = "">
<CFSET CALLER.UPS_Weight = "">
<CFSET CALLER.UPS_BaseCharge = "">
<CFSET CALLER.UPS_OptionalCharge = "">
<CFSET CALLER.UPS_Charge = "">
<CFSET CALLER.UPS_GuaranteedBy = "">
<CFSET CALLER.UPS_Error = ListGetAt(CFHTTP.FileContent, 2, "%")>
<CFSET CALLER.UPS_ErrorCode = ListGetAt(CFHTTP.FileContent, 3, "%")>
</CFIF>
<CFELSE>
<!--- Failed, display error message, and abort --->
<CFOUTPUT><H1>Error: #error_message#</H1></CFOUTPUT>
<CFABORT>
</CFIF> -
Cannot find Data Neighborhood in NI-DAQmx Base to create a Task
I cannot find Data Neighborhood in NI-DAQmx Base inorder to create a Task.
I am trying to follow the "Learning with LabVIEW 8" tutorial book.
I am using a NI USB-6008, and have downloaded NI-DAQmx Base 3.0.
The book says to right click on Data Neighborhood and "Create New". I cannot find Data Neighborhood anywhere. The help documents referance Data Neighborhood but I still can not find it. Is Data Neighborhood not in the base version?
Please Help Thank youHi Lazysmartperson,
DAQmx base uses a different utility to create tasks. This is called the NI DAQmx Base Configuration Utility. It can be found in Windows by going to Start » Programs » National Instruments » NI-DAQmx Base » Utilities » C Interface. The reason behind this is because NI DAQmx Base is typically used on non windows operating systems such as Linux, Mac OSX, and some RT systems. Since there is no Measurement and Automation Explorer (MAX) for these operating systems we use a different utility for customers to configure tasks. If there is no specific reason you cannot use DAQmx, I would highly recommend switching to it. Our DAQmx driver is fully supported within MAX and should show up as in Matthew's last post. If you are looking to develop in DAQmx Base so that the applications can be used later on Linux, Mac, or other DAQmx base supported operating systems, I would suggest taking a look at the DAQmx Base Configuration Utility.
I hope this helps,
Paul C. -
Make sure that you can access the Internet on your computer or device.
Make sure that your computer meets the iTunes minimum system requirements.
Make sure that your operating system is up-to-date:
Done all of the above...everything is in order, still cannot connect to the store. I have the 5th gen iPod and $50 iTunes gift card that I cannot use(been trying now for 6 days). I am going to return both of these items if I cannot find a fix for this.When I called Apple (after wating 42 min. for a live person) I was told to run the APPLE Software Update and turn off location services then restart my computer. There were no available updates. The iPod touch I got on Christmas day. The iTunes app was downloaded the same day. Since day 1 I have not been able to connect. I also followed lllaass's advice and followed instructions on the following 2 websites.
http://www.idownloadblog.com/2012/09/20/fix-for-cannot-connect-error/
http://www.youtube.com/watch?v=PIUitRyZS6U
After restarting my computer:
From the iTunes app I click on the 'iTunes Store'
A new window opens and I get the following message:
This Apple ID has not yet veen used with the iTunes Store.
Please review your account information
So I click on 'Review' and am taken to a crude screen that says
Welcome to the iTunes Store
With an Apple ID, you can download the latest music, videos, and more.
To begin creating your Apple ID, click Continue.
So I click on 'Continue'
A pop up window says:
We could not complete your iTunes Store request. An unknown error occurred (-1202).
There was an error in the iTunes Store. Please try again later.
And the only option I am left with is to click 'OK'
After every fix this same scenerio just loops and loops and loops -
Cannot find an overload for "PeopleManager" and the argument count: "1".
Every time getting following error
Cannot find an overload for “PeopleManager” and the argument count: “1”.
at following line
$people = New-Object Microsoft.SharePoint.Client.UserProfiles.PeopleManager($context)
I am referring userprofile dll from 16 hive...Hi,
Can you provide the complete script in use for a further research? It would make others easier to find out the root cause of this issue.
Here is a working demo which works in my environment, you can take it for a try:
#Specify tenant admin and URL
$User = "[email protected]"
#Configure Site URL and User
$SiteURL = "https://tenant.sharepoint.com/sites/mysite"
#Add references to SharePoint client assemblies and authenticate to Office 365 site - required for CSOM
Add-Type -Path "C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\16\ISAPI\Microsoft.SharePoint.Client.dll"
Add-Type -Path "C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\16\ISAPI\Microsoft.SharePoint.Client.Runtime.dll"
Add-Type -Path "C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\16\ISAPI\Microsoft.SharePoint.Client.UserProfiles.dll"
$Password = Read-Host -Prompt "Please enter your password" -AsSecureString
$Creds = New-Object Microsoft.SharePoint.Client.SharePointOnlineCredentials($User,$Password)
#Bind to Site Collection
$Context = New-Object Microsoft.SharePoint.Client.ClientContext($SiteURL)
$Context.Credentials = $Creds
#Identify users in the Site Collection
$Users = $Context.Web.SiteUsers
$Context.Load($Users)
$Context.ExecuteQuery()
#Create People Manager object to retrieve profile data
$PeopleManager = New-Object Microsoft.SharePoint.Client.UserProfiles.PeopleManager($Context)
Foreach ($User in $Users)
$UserProfile = $PeopleManager.GetPropertiesFor($User.LoginName)
$Context.Load($UserProfile)
$Context.ExecuteQuery()
If ($UserProfile.Email -ne $null)
Write-Host "User:" $User.LoginName -ForegroundColor Green
$UserProfile.UserProfileProperties
Write-Host ""
Thanks
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
Safari and firefox 'cannot find the server' for every other page that i navigate to, unless I turn Wifi off and on. Once i reconnect to the network, the page loads, but after loading a few more pages, the same thing happens all over again.
This happens each and every time, on different Wifi networks, in different locations. On the other hand, I don't ever encounter this problem when I tether my laptop to my mobile phone's 3g/2g network using Personal Hotspot. How do I fix this?Try this DNS server ...
Open System Preferences > Network > Advanced > DNS
Click + and type:
208.67.222.222
Click + again and do the same.
208.67.220.220
Click OK.
Quit and relaunch both your browsers to test.
If that doesn't help, try here > iOS: Troubleshooting Wi-Fi networks and connections
And here > Wi-Fi: How to troubleshoot Wi-Fi connectivity -
In 4.1 BO Client Tools not able to find data source for BVM
Hi All,
In 4.1 BO Client Tools not able to find data source for BVM
Its creating issue .
So if any body have any solution please let me know.
Regards,
Abhishekjava.lang.NoSuchMethodError: org.w3c.dom.Node.getTextContent()Ljava/lang/String;
at customertree.XmlLoader.readData(XmlLoader.java:127)
at customertree.XmlLoader.<init>(XmlLoader.java:69)
at customertree.CustomerTreeFinal.jbInit(CustomerTreeFinal.java:240)
at customertree.CustomerTreeFinal.init(CustomerTreeFinal.java:858)
at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source
at java.lang.Thread.run(Unknown Source)and then inside the code... this is where i get my first error
clients.setRowId(list2.item(i).getTextContent());
Maybe you are looking for
-
Error in saving large value with the data input query
Hi, I am trying to save a large value in 0Quantity using the data input query into a realtime infocube e-g 123456789.1234 Error says too many digits. When i try to save 8 digits before the decimal point ,no error, if it is 9digits before decimal
-
Acrobat 10 and plug-ins for Acrobat 9 incompatibility?
Hi, Today I've installed trial version of Acrobat 10 to check if my plug-in for Acrobat 9 could run for it as well. But after Acrobat 10 launch I've got a window: Acrobat.exe - Unable to Locate Component This application has failed to start because M
-
Hi Forum, I am tuning a query which contains more than 15 outer joins. While going thru the query tuning documents i founf that the USE_NL(table table) hint can be used in these cases. The ideal syntax is Select /*+ USE_NL(table table) */ col1,col2..
-
ADS Error: User does not have access to method rpdata.
Hi All, I have done the ADS configuration according to ADS guide. But when I check the ADS using FP_PDF_TEST_00 report. First of all it is not taking ADSUser or ADS_Agent id. If I give J2EE admin id and password then I get following error: SOAP Runti
-
What to watch for in Lion (migrating settings etc)
hi all. i have update the desktop and the laptop to Lion and noticed that the screen background did not migrate on the desktop, that i had to fix the scroll wheel direction and the i am was missing my Transmit Application for some reason (I re-downlo